Proline-based chiral stationary phases: a molecular dynamics study of the interfacial structure

Proline chains have generated considerable interest as a possible basis for new selectors in chiral chromatography. In this article, we employ molecular dynamics simulations to examine the interfacial structure of two diproline chiral selectors, one with a terminal trimethylacetyl group and one with a terminal t-butyl carbamate group. The solvents consist of a relatively apolar n-hexane/2-propanol and a polar water/methanol mixture. We begin with electronic structure calculations for the two chiral selectors to assess the energetics of conformational changes, particularly along the backbone where the amide bonds can alternate between cis and trans conformations. Force fields have been developed for the two selectors, based on these ab initio calculations. Molecular dynamics simulations of the selective interfaces are performed to examine the preferred backbone conformations, as a function of end-group and solvent. The full chiral surface includes the diproline selectors, trimethylsilyl end-caps, and silanol groups. Connection is made with selectivity measurements on these interfaces, where significant differences are observed between these two very similar selectors.     

Polymer-nanoparticle interfacial behavior revisited: a molecular dynamics study

By tuning the polymer-filler interaction, filler size and filler loading, we use a coarse-grained model-based molecular dynamics simulation to study the polymer-filler interfacial structural (the orientations at the bond, segment and chain length scales, chain size and conformation), dynamic and stress-strain properties. Simulated results indicate that the interfacial region is composed of partial segments of different polymer chains, which is consistent with the experimental results presented by Chen et al. (Macromolecules, 2010, 43, 1076). Moreover, it is found that the interfacial region is within one single chain size (R(g)) range, irrespective of the polymer-filler interaction and the filler size, beyond which the bulk behavior appears. In the interfacial region, the orientation and dynamic behaviors are induced by the interfacial enthalpy, while the size and conformation of polymer chains near the filler are controlled by the configurational entropy. In the case of strong polymer-filler interaction (equivalent to the hydrogen bond), the innerest adsorbed polymer segments still undergo adsorption-desorption process, the transport of chain mass center in the interfacial region exhibits away from the glassy behavior, and no plastic-like yielding point appears in the stress-strain curve, which indicates that although the mobility of interfacial polymer chains is restricted, there exist no "polymer glassy layers" surrounding the filler. In addition, it is evidenced that the filler particle prefers selectively adsorbing the long polymer chains for attractive polymer-filler interaction, validating the experimental explanation of the change of the bound rubber (BR). In short, this work provides important information for further experimental and simulation studies of polymer-nanoparticle interfacial behavior.     

The effect of hydrogen bonding on oligoleucine structure in water: A molecular dynamics simulation study

Molecular dynamics simulations were conducted in order to improve our understanding of the forces that determine polyleucine chains conformations and govern polyleucine self-assembly in aqueous solutions. Simulations of 10 repeat unit oligoleucine in aqueous solution were performed using the optimized potential for liquid simulations (OPLS) - all atom force field using the canonical ensemble for a minimum of 1.3 ns. These simulations provided information on conformations, chain collapse and intermolecular aggregation. Simulations indicate that single isotactic oligoleucine chains in dilute solution assume tightly packed, regular hairpin conformations while atactic oligoleucine assumes a much less regular and less compact structure. The regular, compact collapsed isotactic chain exhibited a greater degree of intramolecular hydrogen bonding and an increased level of hydrophobic t-butyl functional group aggregation compared to the atactic chain. This occurs at the expense of reduced leucine-water hydrogen bonding.     

Amorphous silica modeled with truncated and screened Coulomb interactions: a molecular dynamics simulation study

We show that finite-range alternatives to the standard long-range pair potential for silica by van Beest et al. [Phys. Rev. Lett. 64, 1955 (1990)] might be used in molecular dynamics simulations. We study two such models that can be efficiently simulated since no Ewald summation is required. We first consider the Wolf method, where the Coulomb interactions are truncated at a cutoff distance rc such that the requirement of charge neutrality holds. Various static and dynamic quantities are computed and compared to results from simulations using Ewald summations. We find very good agreement for rc approximately 10 A. For lower values of rc, the long-range structure is affected which is accompanied by a slight acceleration of dynamic properties. In a second approach, the Coulomb interaction is replaced by an effective Yukawa interaction with two new parameters determined by a force fitting procedure. The same trend as for the Wolf method is seen. However, slightly larger cutoffs have to be used in order to obtain the same accuracy with respect to static and dynamic quantities as for the Wolf method.     

Wall-liquid and wall-crystal interfacial free energies via thermodynamic integration: A molecular dynamics simulation study

A method is proposed to compute the interfacial free energy of a Lennard-Jones system in contact with a structured wall by molecular dynamics simulation. Both the bulk liquid and bulk face-centered-cubic crystal phase along the (111) orientation are considered. Our approach is based on a thermodynamic integration scheme where first the bulk Lennard-Jones system is reversibly transformed to a state where it interacts with a structureless flat wall. In a second step, the flat structureless wall is reversibly transformed into an atomistic wall with crystalline structure. The dependence of the interfacial free energy on various parameters such as the wall potential, the density and orientation of the wall is investigated. The conditions are indicated under which a Lennard-Jones crystal partially wets a flat wall.     

Thermophoresis in liquids: a molecular dynamics simulation study

Thermophoresis in liquids is studied by molecular dynamics simulation (MD). A theory is developed that divides the problem in the way consistent with the characteristic scales. MD is then conducted to obtain the solution of each problem, which is to be all combined for macroscopic predictions. It is shown that when the temperature gradient is applied to the nonconducting liquid bath that contains neutral particles, there occurs a pressure gradient tangential to the particle surface at the particle-liquid interface. This may induce the flow in the interfacial region and eventually the particle to move. This applies to the material system that interacts through van der Waals forces and may be a general source of the thermophoresis phenomenon in liquids. The particle velocity is linearly proportional to the temperature gradient. And, in a large part of the given temperature range, the particle motion is in the direction toward the cold end and decreases with respect to the temperature. It is also shown that the particle velocity decreases or even reverses its sign in the lowest limit of the temperature range or with a particle of relatively weak molecular interactions with the liquid. The characteristics of the phenomenon are analyzed in molecular details.     

United atom force field for phospholipid membranes: Constant pressure molecular dynamics simulation of dipalmitoylphosphatidicholine/water system

We refined the united atom field for the simulations of phospholipid membranes. To validate this potential we performed 1000-ps constant pressure simulation of a dipalmitoylphosphatidicholine (DPPC) bilayer at T=50° C. The average area per head group (61.6±0.6) Ų obtained in our simulation agrees well with the measured one of (62.9±1.3) Ų. The calculated S_CD order parameters for the Sn-2 hydrocarbon tail also display a good agreement with the experiment. The conformations of head groups in our simulations of the liquid crystal phase are different than the ones observed in the crystal structure. ©1999 John Wiley & Sons, Inc. J Comput Chem 20, 531–545, 1999     

Implementation of pi-pi interactions in molecular dynamics simulation

No explicit pi-pi interaction term has been incorporated in the conventional molecular dynamics (MD) simulation programs in spite of its significant role in the folding of biomolecules and the clustering of organic chemicals. In this article, we propose a technique to emphasize the effect of pi-pi interactions using a function of energy and implement it into an MD simulation program. Several trial calculations show that the pi-pi incorporated program gives improved results consistent with experimental data on atom geometry and has no unfavorable interference with the conventional computational framework. This indicates an importance of the explicit consideration of pi-pi interactions in MD simulation.     

Structure and ultrafast dynamics of liquid water: a quantum mechanics/molecular mechanics molecular dynamics simulations study

A quantum mechanics/molecular mechanics molecular dynamics simulation was performed for liquid water to investigate structural and dynamical properties of this peculiar liquid. The most important region containing a central reference molecule and all nearest surrounding molecules (first coordination shell) was treated by Hartree-Fock (HF), post-Hartree-Fock [second-order Moller-Plesset perturbation theory (MP2)], and hybrid density functional B3LYP [Becke's three parameter functional (B3) with the correlation functional of Lee, Yang, and Parr (LYP)] methods. In addition, another HF-level simulation (2HF) included the full second coordination shell. Site to site interactions between oxygen-oxygen, oxygen-hydrogen, and hydrogen-hydrogen atoms of all ab initio methods were compared to experimental data. The absence of a second peak and the appearance of a shoulder instead in the gO-O graph obtained from the 2HF simulation is notable, as this feature has been observed so far only for pressurized or heated water. Dynamical data show that the 2HF procedure compensates some of the deficiency of the HF one-shell simulation, reducing the difference between correlated (MP2) and HF results. B3LYP apparently leads to too rigid structures and thus to an artificial slow down of the dynamics.     

A molecular dynamics study of nitric oxide in water: diffusion and structure

We present molecular dynamics simulations of the diffusion coefficients and structure of water-nitric oxide mixtures at ambient (298 K) and in vivo (310 K) conditions. A two-site rigid-body molecular model with partial charges and a Lennard-Jones potential on both sites is proposed for nitric oxide and used in conjunction with the extended simple point-charge model for liquid water in our simulations. The diffusion coefficients obtained from the simulations are in good agreement with experimental data. The results from intermolecular partial pair functions show that under these thermodynamic conditions, the existence of nitric oxide in liquid water has little impact on the structure of water and the tendency to form H bonds between water molecules. We also find that it is unlikely that H bonds form between the hydrogen atoms in water and either the nitrogen or the oxygen atom on the nitric oxide at the temperatures and densities examined in this study. This study suggests that in low concentrations nitric oxide molecules exist as free molecules in liquid water rather than forming complexes with water molecules.     

Systematic coarse-graining of nanoparticle interactions in molecular dynamics simulation

A recently developed multiscale coarse-graining procedure [Izvekov, S.; Voth, G. A. J. Phys. Chem. B 2005, 109, 2469] is extended to derive coarse-grained models for nanoparticles. The methodology is applied to C(60) and to carbonaceous nanoparticles produced in combustion environments. The coarse-graining of the interparticle force field is accomplished applying a force-matching procedure to data obtained from trajectories and forces from all-atom MD simulations. The CG models are shown to reproduce accurately the structural properties of the nanoparticle systems studied, while allowing for MD simulations of much larger self-assembled nanoparticle systems.     

Rotational motion in liquid water is anisotropic: a nuclear magnetic resonance and molecular dynamics simulation study

Experimental NMR measurements of the deuterium and (17)O T(1) relaxation times in deuterium-enriched liquid water have been performed from 275 to 350 K. These relaxation times can yield rotational correlation times of appropriate molecule-fixed unit vectors if the quadrupole coupling constants and asymmetry parameters are known. We determine the latter from ab initio studies of water clusters and experimental chemical shift measurements. We find that the rotational correlation time for the OD bond vector in D(2)(16)O varies from 5.8 ps at 275 K to 0.86 ps at 350 K, and that the rotational correlation time for the out-of-plane vector of dilute D(2)(17)O in D(2)(16)O varies from 4.4 ps at 275 K to 0.64 ps at 350 K. These results indicate that the rotational motion of water is anisotropic. Molecular dynamics simulations of liquid water are in good agreement with these experiments at the higher temperatures, but the simulation results are considerably faster than experiment at the lower temperatures.     

Low-frequency vibrational spectrum of water in the hydration layer of a protein: a molecular dynamics simulation study

An atomistic molecular dynamics simulation has been carried out to understand the low-frequency intermolecular vibrational spectrum of water present in the hydration layer of the protein villin headpiece subdomain or HP-36. An attempt is made to explore how the heterogeneous rigidity of the hydration layers of different segments (three alpha helices) of the protein, strength of the protein-water hydrogen bonds, and their differential relaxation behavior influence the distribution of the intermolecular vibrational density of states of water in the hydration layers. The calculations revealed that compared to bulk water these bands are nonuniformly blue-shifted for water near the helices, the extent of shifts being more pronounced for water molecules hydrogen bonded to the protein residues. It is further noticed that the larger blue shift observed for the water molecules hydrogen bonded to helix 2 residues correlates excellently with the slowest structural relaxation of these hydrogen bonds. These results can be verified by suitable experimental measurements.     

Structure and dynamics of water at a clay surface from molecular dynamics simulation

We report a molecular dynamics study of the structure and dynamics of water at a clay surface. The negative charge of the surface and the presence of surface oxygen atoms perturbs water over two to three molecular layers, while the nature of the counterions (Na(+)or Cs(+)) has only a small effect. In the first molecular layer, approximately half of the water molecules are H-bonded to the surface. We also analyze the H-bond network between surface water molecules. The diffusion of water molecules along the surface is slowed down compared to the bulk case. As far as the orientational order and dynamics of the water dipole are concerned, only the component normal to the clay surface is perturbed. We investigate the surface H-bond formation and dissociation dynamics and their coupling to the release of molecules from the first molecular layer. We introduce a simple kinetic model in the spirit of Luzar and Chandler [Nature, 1996, 379, 55] to allow for a comparison with bulk water dynamics. This model semi-quantitatively reproduces the molecular simulation results and suggests that H-bond formation is faster with the surface than in the bulk, while H-bond dissociation is slower.     

Orientational dynamics of water trapped between two nanoscopic hydrophobic solutes: A molecular dynamics simulation study

We investigate thoroughly the effect of confinement and solute topology on the orientational dynamics of water molecule in the interplate region between two nanoscopic hydrophobic paraffinlike plates. Results are obtained from molecular dynamics simulations of aqueous solutions of paraffinlike plates in the isothermal-isobaric ensemble. An analysis of survival time auto correlation function shows that the residence time of the water molecule in the confined region between two model nanoscopic hydrophobic plates depends on solute surface topology (intermolecular distance within the paraffinlike plate). As expected, the extent of confinement also changes the residence time of water molecules considerably. Orientational dynamics was analyzed along three different directions, viz., dipole moment, HH, and perpendicular to molecular plane vectors. It has been demonstrated that the rotational dynamics of the confined water does not follow the Debye rotational diffusion model, and surface topology of the solute plate and the extent of confinement have considerable effect on the rotational dynamics of the confined water molecules.     

Solvation of xyloglucan in water/alcohol systems by molecular dynamics simulation

Xyloglucan in water solution turns into a gel with addition of alcohol such as methanol and ethanol. In regard to this phenomenon, we investigated the adhesive property of alcohol to xyloglucan and proposed the mechanism of the gelation by molecular dynamics (MD) simulation of a xyloglucan in water, water/methanol, and water/ethanol solution for 10 ns. The alcohol molecules showed its adhesive property to the xyloglucan and made the swelling-shrinking motion of the xyloglucan slow. Alcohol molecules solvated to the xyloglucan mainly in hydrophobic way so as to fill the void of water hydration shell, resulting in reformation of the hydrogen-bond network of water molecules around the solute. We also found that alcohol molecules have strong tendency to hydrogen-bond on xylose O3 in xyloglucan. According to these results, we proposed the gelation mechanism of xyloglucan in water/alcohol solution.     

Monte Carlo simulation of miscibility of polymer blends with repulsive interactions: effect of chain structure

The effects of the chain structure and the intramolecular interaction energy of an A/B copolymer on the miscibility of the binary blends of the copolymer and homopolymer C have been studied by means of a Monte Carlo simulation. In the system, the interactions between segments A, B and C are more repulsive than those between themselves. In order to study the effect of the chain structure of the A/B copolymer on the miscibility, the alternating, random and block copolymers were introduced in the simulations, respectively. The simulation results show that the miscibility of the binary blends strongly depends on the intramolecular interaction energy () between segments A and B within the A/B copolymers. The higher the repulsive interaction energy, the more miscible the A/B copolymer and homopolymer C are. For the diblock copolymer/homopolymer blends, they tend to form micro phase domains. However, the phase domains become so small that the blend can be considered as a homogeneous phase for the alternating copolymer/homopolymer blends. Furthermore, the investigation of the average end-to-end distance () in different systems indicates that the copolymer chains tend to coil with the decrease of whereas the of the homopolymer chains depends on the chain structure of the copolymers. As for the system containing the alternating or the random copolymers, the homopolymer chains also tend to coil with the decrease of . However, for the systems including the block copolymers, there is a slight difference in the of the homopolymer chains with the variation of .