Speciation of chromium by in-capillary reaction and capillary electrophoresis with chemiluminescence detection

A sensitive method for the simultaneous determination of chromium(III) (Cr3+) and chromium(VI) (CrO4(2-)) using in-capillary reaction, capillary electrophoresis (CE) separation and chemiluminescence (CL) detection was developed. The chemiluminescence reaction was based on luminol oxidation by hydrogen peroxide in basic aqueous solution catalyzed by Cr3+ ion followed by capillary electrophoresis separation. Based on in-capillary reduction, chromium(VI) can be reduced by acidic sodium hydrogensulfite to form chromium(III) while the sample is running through the capillary. Before the electrophoresis procedure, the sample (Cr3+ and CrO4(2-)), buffer and acidic sodium hydrogensulfite solution segments were injected in that order into the capillary, followed by application of an appropriate running voltage between both ends. As both chromium species have opposite charges, Cr3+ ions migrate to the cathode, while CrO4(2-) ions, moving in the opposite direction toward the anode, react with acidic sodium hydrogensulfite which results in the formation of Cr3+ ions. Because of the migration time difference of both Cr3+ ions, Cr(III) and Cr(VI) could be separated. The running buffer was composed of 0.02 mol l(-1) acetate buffer (pH 4.7) with 1 x 10(-3) mol l(-1) EDTA. Parameters affecting CE-CL separation and detection, such as reductant (sodium hydrogensulfite) concentration, mixing mode of the analytes with CL reagent, CL reaction reagent pH and concentration, were optimized. The limits of detection (LODs) of Cr(III) and Cr(VI) were 6 x 10(-13) and 8 x 10(-12) mol l(-1) (S/N=3), respectively. The mass LODs for Cr(III) and Cr(VI) were 1.2 x 10(-20) mol (12 zmol) and 3.8 x 10(-19) mol (380 zmol), respectively.     

Quantification of Carcinoembryonic Antigen by Capillary Electrophoresis–Chemiluminescence Detection using Internal Standard Method

Abstract

Sensitive determination of tumor marker carcinoembryonic antigen (CEA) by capillary electrophoresis–chemiluminescence detection (CE-CL) has been developed using an internal standard method. Parameters affecting the CE separation and CL detection were systematically optimized. Under the optimal conditions, the free horseradish peroxidase (HRP)–labeled antibody (Ab?), the bound Ab?-antigen complex (Ab?-Ag), and HRP used as internal standard were well separated within 5 min. The proposed method was successfully applied for the quantification of CEA in human sera obtained from both healthy persons and patients.     

Sensitive detection of tumor marker CA15-3 in human serum by capillary electrophoretic immunoassay with chemiluminescence detection

A new and sensitive non-competitive immunoassay (IA) for tumor marker carbohydrate antigen 15-3 (CA15-3) by CE coupling with ECL detection has been developed. This method is based on luminol-H(2)O(2 )reaction catalyzed by horseradish peroxidase (HRP). The optimum CE separation and CL detection conditions were investigated. After the non-competitive immunoreaction, the free HRP-labeled CA15-3 antibody (Ab*) and the bound Ab*-antigen (Ab*-Ag) complex were separated in a separation capillary and then catalyzed the CL reaction of luminol and H(2)O(2 )in a reaction capillary following the separation capillary. The calibration curve based on the peak areas of Ab*-Ag complex plotted against the concentrations of CA15-3 is in the range of 0-250 U/mL with a correlation coefficient of 0.9983 and the detection limit is 0.035 U/mL (S/N = 3). The response for five consecutive injections of 125 U/mL CA15-3 resulted in RSDs of 0.83% and 3.1% for the migration time and the peak area, respectively. The method was successfully used for the quantification of CA15-3 in human sera obtained from healthy persons and from patients with breast cancer.     

Quantification of dibromodimethylhydantoin disinfectants in water by chemiluminescent method.

Quantification of 1,3-dibromo-5,5-dimethylhydantoin (DBDMH) was studied by its chemiluminescence (CL) reaction with luminol in an alkaline medium. The stability of DBDMH, 1,3-dichloro-5,5-dimethylhydantoin (DCDMH) and 1-bromo-3-chloro-5,5-dimethylhydantoin (BCDMH) in water was initially assessed by its CL reaction capability. The results indicated that the hydrolysis process was critically dependent on the types of reagents and their pHs. Capillary electrophoresis (CE) separation with CL detection procedure was applied to the DBDMH solution. It was found that at least 3 species in the aqueous DBDMH solution could oxidize luminol to give luminescence: one of them was confirmed to be hypobromite and the others could be the unhydrolyzed or active oxygen produced in the hydrolysis reaction. Finally, a flow-injection chemiluminescent method was proposed for the determination of DBDMH. The concentration of the analyte showed a linear relationship with the CL intensity in the range of 1.2x10(-10) to 1.0x10(-6) mol dm-3 and the detection limit was as low as 6.2x10(-11) mol dm-3. The relative standard deviation (RSD) is 1.7% (n=9) for 2.8x10(-7) mol dm-3 DBDMH.     

CE coupling with end-column electrochemiluminescence detection for chiral separation of disopyramide

CE with electrochemiluminescence (ECL) detection technique was successfully applied for the chiral separation of a kind of class IA antiarrhythmic racemic drug. To the best of our knowledge, this is the first report of ECL detection used in chiral CE. To get better detection sensitivity and good enantioresolution at the same time, the conditions of capillary inlet and outlet buffer were systematically optimized. Unlike the traditional chiral separation method, the buffers we used in the capillary inlet and outlet differed from each other in terms of buffer pH, ionic strength, type of BGE as well as buffer composition. Under the optimum conditions, baseline enantioseparation and highly sensitive detection of the enantiomers were achieved. Wide linear relationship of each enantiomer was achieved in the range of 5 x 10(-7) to 2 x 10(-5) mol/L with relative coefficients of 0.996 and 0.997, respectively. The detection limits were estimated to be 8 x 10(-8) and 1.0 x 10(-7) mol/L (S/N = 3) for the enantiomers, respectively. In addition, a successful application of this new method to the chiral separation of the racemic drug in spiked plasma samples confirmed the validity and applicability of the chiral CE-ECL method.     

Tris(2,2'-bipyridyl)ruthenium(II)-zirconia-Nafion composite films applied as solid-state electrochemiluminescence detector for capillary electrophoresis

The major goal of this work was to develop a new solid-state electrochemiluminescence (ECL) detector suitable for capillary electrophoresis (CE). The detector was fabricated by coating a sol-gel derived zirconia (ZrO(2))-Nafion composite film on a graphite electrode, then the zirconia-Nafion modified electrode was immersed in tris(2,2'-bipyridyl)ruthenium(II) (Ru(bpy)(3) (2+)) solution to immobilize this active chemiluminescence reagent. The voltammetric and ECL behaviors of the detector were investigated and optimized in tripropylamine solution. The ratio of 53% for zirconia in the zirconia-Nafion composite provided the highest luminescence intensity of immobilized Ru(bpy)(3) (2+). The ECL can maintain its stability very well in the phosphate solution in the period of 5-90 h when the solid-state ECL detector was immersed in the solution all the time. The optimum distance of capillary outlet to the solid-state ECL detector has been found to be ca. 50-80 microm for a 75 microm capillary. The effects of ionic strength and pH of ECL solution on peak height were investigated. The CE with solid-state ECL detector system was successfully used to detect tripropylamine, lidocaine, and proline. The detection limits (S/N = 3) were 5 x 10(-9) mol.L(-1) for tripropylamine, 1 x 10(-8) mol.L(-1) for lidocaine and 5 x 10(-6) mol.L(-1) for proline, and the linear ranges were from 1.0 x 10(-8) to 1.0 x 10(-5) mol.L(-1) for tripropylamine, 5.0 x 10(-7) mol.L(-1) to 1.0 x 10(-5) mol.L(-1) for lidocaine and 1.0 x 10(-5) to 1.0 x 10(-3) mol.L(-1) for proline, respectively.     

Determination of folic acid by capillary electrophoresis with chemiluminescence detection

A rapid and simple method is presented for the determination of folic acid (FA) by capillary electrophoresis (CE) with chemiluminescence (CL) detection. This method was based on enhance effect of FA on the CL reaction between luminol and BrO(-) in alkaline aqueous solution. Optimal separation and determination was obtained with an electrophoretic buffer of 35 mM sodium borate (pH 9.4) containing 0.8 mM luminol, and an oxidizer solution of 1.6 mM NaBrO in 100 mM NaCO(3) buffer solution (pH 12.0). Under the optimal conditions, the determination of FA was achieved in less than 20 min, and the detection limit was 2.0 x 10(-8) M (S/N=3). The relative standard deviations (RSDs) on peak area and migration time were in the 1.5 and 1.1%, respectively. The present CE-CL method was applied to the determination of FA in commercial pharmaceutical tablets, apple juices and human urine.     

A facile and sensitive chemiluminescence detection of amino acids in biological samples after capillary electrophoretic separation

It was found that native amino acids enhanced the chemiluminescence (CL) reaction between luminol and BrO(-) in an alkaline aqueous solution. This has led to the development of a facile and highly sensitive CL detection scheme for the determination of amino acids in biological samples after capillary electrophoretic (CE) separation. The CE-CL conditions were optimized. An electrophoretic buffer of 2.5 x 10(-2) M sodium borate (pH 9.4) containing 1 x 10(-4) M luminol was used. The oxidizer solution of 8 x 10(-4) M NaBrO in 0.1 M sodium carbonate buffer solution (pH 12.5) was introduced post-column. Under the optimal conditions, the detection limits were 1.0 x 10(-7) M for glutamic acid (Glu) and 1.3 x 10(-7) M (S/N = 3) for aspartic acid (Asp). The relative standard deviations (RSDs) of peak area and migration time were in the ranges of 3.8-4.3% and 1.4-1.6%, respectively. The present method was applied to the determination of excitatory amino acids (i.e., Asp and Glu) in rat brain tissue and monkey plasma. The levels of these major excitatory amino acids in monkey plasma were quantified for the first time and found to be 1.17 +/- 0.17 x 10(-5) M (mean +/- SD, n = 6) for Glu and 1.64 +/- 0.19 x 10(-6) M for Asp, which were comparable with the levels in human plasma.     

Determination of catecholamines by CE with direct chemiluminescence detection

A rapid and sensitive method to detect three catecholamines, isoprenaline, epinephrine, and dopamine, by CE coupled with direct luminol-potassium periodate chemiluminescence (CL) detection is described. The conditions for CE separation and CL reaction were systematically optimized. Under the optimum conditions, the baseline separation of three catecholamines was achieved within 6.5 min. The LODs obtained in standard solution were 5.3 x 10(-8 )mol/L for isoprenaline, 4.7 x 10(-8 )mol/L for epinephrine, and 1.5 x 10(-7 )mol/L for dopamine. The RSD of the migration time and peak area were less than 1.8 and 3.6% (n = 5), respectively. The present method was applied to the determination of the dopamine in urine samples of cigarette smokers and nonsmokers. The results obtained indicate that there is a close relationship between the content of dopamine in human urine and the amount of cigarettes smoked daily; the level of dopamine in smokers is higher than in nonsmokers.     

Direct determination of amino acids by pressurized capillary electrochromatography with chemiluminescence detection

A pressurized CEC (pCEC) coupled with on-column chemiluminescence (CL) detection was developed for direct determination of amino acids, which was based on the principle of an enhanced effect of Cu(II)-amino acid complexes on the CL reaction between luminol and hydrogen peroxide in alkaline solution. The effects of some important factors on pCEC separation and CL intensity were systemically investigated. Baseline separation of amino acids including L-histidine (L-His), L-threonine (L-Thr), and L-tyrosine (L-Tyr) was achieved by using a monolithic column with a mobile phase of 5.0x10(-3) mol/L phosphate buffer at pH 8.0 that contained 25% v/v methanol and 5.0x10(-4) mol/L luminol and 1.0x10(-5) mol/L Cu(II) at an applied voltage of -5 kV. The calibration curves of the analytes by plotting the peak height against corresponding concentration were linear over the range of 3.2x10(-6)-3.2x10(-4) mol/L for L-His, 4.1x10(-6)-4.1x10(-4) mol/L for L-Thr, and 6.0x10(-7)-3.0x10(-4) mol/L for L-Tyr. The LODs for L-His, L-Thr, and L-Tyr were 6.4x10(-7), 8.4x10(-7), and 3.0x10(-7) mol/L (S/N = 2), respectively. The proposed method was applied to the analysis of amino acid injection sample with satisfactory results. Mean recoveries for three amino acids were from 84.3 to 89.6%.     

Chemiluminescence of tryptophan and histidine in Ru(bpy)3(2+)-KMnO4 aqueous solution

Amino acids with different chemical structures have different abilities in terms of increasing the intensity of chemiluminescence (CL) of tris(2,2'-bipyridine)ruthenium(II) [Ru(bpy)3(2+)]. In a flow system, CL caused by the reaction between Ru(bpy)3(3+) and 15 amino acids was observed, but only tryptophan (Trp) and histidine (His) enhanced the intensity obviously, and so the CL of Trp and His and their molecular groups was studied. A calculation of the ionization potentials (IPs) of their N atom indicated that the CL intensities of these compounds depended on their IPs. In addition, the flow system was used for the determination of Trp and His, and the detection limits were 3 x 10(-8) mol L(-1) for His and 2.5 x 10(-9) mol L(-1) for Trp. The calibration curves for the two amino acids were 1.0 x 10(-7) to 5.0 x 10(-3) mol L(-1) for His and 1.0 x 10(-8) to 1.0 x 10(-4) mol L(-1) for Trp. The proposed approach was applied to the determination of His in Ganoderma.     

Capillary electrophoresis system with flow injection sample introduction and chemiluminescence detection on a chip platform

A capillary electrophoresis (CE) system with chemiluminescence (CL) detection was combined with flow injection (FI) sample introduction on a chip platform. A falling-drop interface was applied to perform FI split-flow sample introduction while achieving electrical isolation from the CE high voltage. A tubular reservoir at the capillary outlet served as both the CL reaction and detection cell for the luminol-peroxide-metallic ion chemiluminescent reaction, with the luminol included in the separation buffer and CL reagent H2O2 continuously introduced into the outlet reservoir. An optical fiber was positioned within the outlet reservoir directly opposite, and 300 microns away from, the capillary outlet for collecting and transferring the generated CL to the PMT. The peak height signals and the separation efficiency were almost independent of the reagent flow-rate, making the system a robust one. The performance of the system was illustrated by the separation of Co(II) and Cu(II), achieving baseline separation in 60 s. Detection limits (3 sigma) were 1.25 x 10(-8) and 2.3 x 10(-6) mol dm-3 for Co(II) and Cu(II), respectively. Peak height precision was 1.9% RSD (n = 9) at the 10(-7) mol dm-3 Co level.     

Analysis of monosaccharides by capillary electrophoresis with electrochemiluminescence detection.

A capillary electrophoresis with tris(2,2'-bipyridyl)ruthenium(II)-based electrogenerated chemiluminescence detection method was investigated for the determination of monosaccharides using 2-diethylaminoethanethiol as a derivatizing reagent. Xylose, rhamnose, glucose and glucosamine were selected for the demonstration of the method. Under optimal conditions, the calibration curve of glucose was linear over the range of 1.0 x 10(-4) to 1.0 x 10(-7) mol/L (R = 0.999) and the detection limit was 6.0 x 10(-8) mol/L (S/N = 3). The method was successfully applied for the assay of glucose in angelica.     

Chemiluminescence detection coupled to capillary electrophoresis

In recent years, chemiluminescence (CL)-based detection coupled to capillary electrophoresis (CE) as separation technique has attracted much interest due to new advances in home-made configurations, sample-treatment techniques for application to real matrixes, development of a commercial instrument and use of miniaturization techniques to obtain micro total analysis systems incorporating CE separation and CL detection in microchips. We present some developments, key strategies and selected analytical applications of CE-CL since the year 2000 in diverse fields (e.g., clinical and pharmaceutical, environmental or food analysis).     

Analysis of nephroloxic and carcinogenic aristolochic acids in Aristolochia plants by capillary electrophoresis with electrochemical detection at a carbon fiber microdisk electrode

Aristolochic acids (AAs) are the main bioactive ingredients in the most of Aristolochia plants, which are used to make dietary supplements, slimming pills and Traditional Chinese Medicines (TCMs). Excessive ingestion of AAs can lead to serious nephropathy. Therefore, quantitative analysis and quality control for the plants containing AAs is of great importance. In this paper, capillary electrophoresis (CE) with electrochemical detection (ED) at a 33 microm carbon fiber microdisk electrode (CFE) has been applied to detect AA-I and AA-II in Aristolochia plants. Under the optimum conditions: detection potential at 1.20 V, 2.0 x 10(-2) mol L(-1) phosphate buffer solution (PBS) (pH 10.0), injection time 25 s at a height of 17 cm and separation voltage at 12.5 kV, the AA-I and AA-II were baseline separated within 5 min. Low detection limits for AA-I and AA-II were 4.0 x 10(-8) mol L(-1) and 1.0 x 10(-7) mol L(-1), respectively. Wide linear ranges were from 4.0 x 10(-8) mol L(-1) to 1.9 x 10(-5) mol L(-1) and 1.0 x 10(-7) mol L(-1) to 5.0 x 10(-5) mol L(-1) for AA-I and AA-II, respectively. The proposed method has been successfully applied to analyze AAs contents in plant extracts. The results indicated that the contents of AAs in each part of Aristolochia debilis Sieb. Et Zucc. plant were different. Meanwhile, the CE-ED method was utilized for fingerprint analysis of medicine herbs. Six herbs (Radix aristolochiae, Fructus aristolochiae, Herba aristolochiae, Caulis aristolochiae manshuriensis, Caulis clematidis armandii, Caulis akebiae) were well distinguished by comparing their electropherograms obtained by CE-ED method.     

Attomole sensitivity for unlabeled proteins and polypeptides with on-chip capillary electrophoresis and universal detection by interferometric backscatter

A universal detector based on backscatter interferometry has been developed to perform nanoliter volume refractive index measurements for on-chip sodium dodecyl sulfate (SDS) gel based (polyethylene oxide gel) separations and quantification label-free proteins. The on-chip interferometric backscatter detector (OCIBD) system consists of a simple, folded optical train based on the interaction of a laser beam with an etched channel in the shape of half cylinder in a fused-silica plate. The backscattered light from the channel takes on the form of a high-contrast interference pattern that contains information related to the bulk properties of the fluid located within the probe or detection volume of 2.32 x 10(-9) L. Depending on capillary electrophoresis (CE) injection method, the positional changes of the interference pattern extrema (fringes) allow for the quantification of unlabeled proteins at levels ranging from 11 to 310 amol (2.7 x 10(-8)mol/L) with a linear dynamic range of 2.5 decades (egg albumin). Using OCIBD microchannel-based SDS capillary gel electrophoresis (SDS/CGE), separation and detection of five label-free proteins was achieved in less than 100 seconds with detection limits ranging from 0.95 pg (1.1 x 10(-16)mol or 2.5 x 10(-7)mol/L) of calmodulin to 7.0 pg (1.0 x 10(-16)mol or 2.4 x 10(-7)mol/L) for bovine serum albumin (BSA) without signal filtering or active thermal control. This development shows that a universal detector based on backscatter interferometry can be used effectively for on-chip label-free solute analysis.     

Simultaneous determination of benserazide and levodopa by capillary electrophoresis-chemiluminescence using an improved interface

A capillary electrophoresis coupling with indirect chemiluminescence detection method for the simultaneous determination of benserazide and levodopa has been developed. The detection interface was improved to simplify the capillary electrophoresis-chemiluminescence (CE-CL) system and the features of this improved interface were illustrated in this paper. The CE-CL conditions for the simultaneous determination of benserazide and levodopa were optimized. Under the optimal conditions, the CL intensity was linear with concentrations of levodopa in the range of 1.0 to 100.0 microg ml(-1), and benserazide in the range of 10.0 to 1,000 microg ml(-1), respectively. The detection limits (S/N=3) in turn were 1.85 microg ml(-1) for BS and 0.12 microg ml(-1) for L-dopa with relative standard deviations of less than 3%. The proposed method has been successfully applied to the determination of benserazide and levodopa in medopar tablets and spiked urine samples, demonstrating the feasibility and reliability of the proposed method.     

毛细管电泳免疫化学发光检测鼠血管平滑肌细胞中zmol骨形成蛋白-2

近年来,结合毛细管电泳的免疫分析研究在不断加强.特别是毛细管电泳免疫激光诱导荧光(CEIA-LIF)检测由于具有较高的灵敏度而十分引人注目.常文保等用CEIA-LIF检测雌三醇,检出限为31.6ng/L,可用于血清和尿样分析.Kennedy等用芯片CEIA-LIF检测了鼠胰腺细胞中的胰岛素,     

四种阴离子的毛细管电泳电导检测(英文)

 采用柠檬酸 柠檬酸钠作为缓冲体系 ,使用负高压 ,对Cl-,NO3 -,HCO3 -和H2 PO4 -等 4种常见阴离子进行了分离检测 ,研究了缓冲剂的种类、浓度、pH值及操作电压对分离的影响。在选定的条件下 ,4种离子的定量线性范围 :Cl-5 0× 10 -5mol/L～ 2 5× 10 -3 mol/L ,NO3 -6 0× 10 -5mol/L～ 2 0× 10 -3 mol/L ,HCO3 -5 0× 10 -6mol/L～ 2 0× 10 -4 mol/L ,H2 PO4 -6 0× 10 -5mol/L～ 1 0× 10 -3 mol/L ;检出限 :Cl-1 5× 10 -5mol/L ,NO3 -3 0×10 -5mol/L ,HCO3 -1 0× 10 -6mol/L ,H2 PO4 -2 0× 10 -5mol/L ;峰面积的RSD (n =6 ) :Cl-3 1% ,     

Capillary electrophoresis/electrochemical detection system with on-line deoxygenation

A capillary electrophoresis (CE)/electrochemical detection system with on-line deoxygenation was developed, consisting of a deoxygenation injector, a deoxygenation protector, and an electrochemical detection cell. When the system was utilized for 60 min, the steady-state current of oxygen detected could be dropped to 3% of the original value for the gold/mercury amalgam electrode and to 8% of the original value for the gold electrode, and the limit of detection could be decreased two orders of magnitude for the reducible analytes such as TI+ (from 3.1 x 10-5 mol/L to 8.0 x 10-7 mol/L) and metronidazole (from 3.8 x 10-5 mol/L to 4.0 x 10-7 mol/L).