Mimicking Elementary Reactions of Manganese Lipoxygenase Using Mn-hydroxo and Mn-alkylperoxo Complexes

Manganese lipoxygenase (MnLOX) is an enzyme that converts polyunsaturated fatty acids to alkyl hydroperoxides. In proposed mechanisms for this enzyme, the transfer of a hydrogen atom from a substrate C-H bond to an active-site Mn^III-hydroxo center initiates substrate oxidation. In some proposed mechanisms, the active-site Mn^III-hydroxo complex is regenerated by the reaction of a Mn^III-alkylperoxo intermediate with water by a ligand substitution reaction. In a recent study, we described a pair of Mn^III-hydroxo and Mn^III-alkylperoxo complexes supported by the same amide-containing pentadentate ligand (^6Medpaq). In this present work, we describe the reaction of the Mn^III-hydroxo unit in C-H and O-H bond oxidation processes, thus mimicking one of the elementary reactions of the MnLOX enzyme. An analysis of kinetic data shows that the Mn^III-hydroxo complex [Mn^III(OH)(^6Medpaq)]⁺ oxidizes TEMPOH (2,2′-6,6′-tetramethylpiperidine-1-ol) faster than the majority of previously reported Mn^III-hydroxo complexes. Using a combination of cyclic voltammetry and electronic structure computations, we demonstrate that the weak Mn^III-N(pyridine) bonds lead to a higher Mn^III/II reduction potential, increasing the driving force for substrate oxidation reactions and accounting for the faster reaction rate. In addition, we demonstrate that the Mn^III-alkylperoxo complex [Mn^III(OO^tBu)(^6Medpaq)]⁺ reacts with water to obtain the corresponding Mn^III-hydroxo species, thus mimicking the ligand substitution step proposed for MnLOX.     

Dioxygen Reactivity of Copper(I)/Manganese(II)-Porphyrin Assemblies: Mechanistic Studies and Cooperative Activation of O2

The oxidation of transition metals such as manganese and copper by dioxygen (O₂) is of great interest to chemists and biochemists for fundamental and practical reasons. In this report, the O₂ reactivities of 1:1 and 1:2 mixtures of [(TPP)Mn^II] (1; TPP: Tetraphenylporphyrin) and [(tmpa)Cu^I(MeCN)]⁺ (2; TMPA: Tris(2-pyridylmethyl)amine) in 2-methyltetrahydrofuran (MeTHF) are described. Variable-temperature (−110 °C to room temperature) absorption spectroscopic measurements support that, at low temperature, oxygenation of the (TPP)Mn/Cu mixtures leads to rapid formation of a cupric superoxo intermediate, [(tmpa)Cu^II(O₂^•–)]⁺ (3), independent of the presence of the manganese porphyrin complex (1). Complex 3 subsequently reacts with 1 to form a heterobinuclear μ-peroxo species, [(tmpa)Cu^II–(O₂^2–)–Mn^III(TPP)]⁺ (4; λ_max = 443 nm), which thermally converts to a μ-oxo complex, [(tmpa)Cu^II–O–Mn^III(TPP)]⁺ (5; λ_max = 434 and 466 nm), confirmed by electrospray ionization mass spectrometry and nuclear magnetic resonance spectroscopy. In the 1:2 (TPP)Mn/Cu mixture, 4 is subsequently attacked by a second equivalent of 3, giving a bis-μ-peroxo species, i.e., [(tmpa)Cu^II−(O₂²⁻)−Mn^IV(TPP)−(O₂²⁻)−Cu^II(tmpa)]²⁺ (7; λ_max = 420 nm and δ_pyrrolic = −44.90 ppm). The final decomposition product of the (TPP)Mn/Cu/O₂ chemistry in MeTHF is [(TPP)Mn^III(MeTHF)₂]⁺ (6), whose X-ray structure is also presented and compared to literature analogs.     

Highly Selective and Catalytic Oxygenations of C−H and C=C Bonds by a Mononuclear Nonheme High‐Spin Iron(III)‐Alkylperoxo Species

The reactivity of a mononuclear high‐spin iron(III)‐alkylperoxo intermediate [Fe^III(t‐BuL^Urea)(OOCm)(OH₂)]²⁺( 2 ), generated from [Fe^II(t‐BuL^Urea)(H₂O)(OTf)](OTf) ( 1 ) [t‐BuL^Urea=1,1′‐(((pyridin‐2‐ylmethyl)azanediyl)bis(ethane‐2,1‐diyl))bis(3‐(tert‐butyl)urea), OTf=trifluoromethanesulfonate] with cumyl hydroperoxide (CmOOH), toward the C?H and C=C bonds of hydrocarbons is reported. 2 oxygenates the strong C?H bonds of aliphatic substrates with high chemo‐ and stereoselectivity in the presence of 2,6‐lutidine. While 2 itself is a sluggish oxidant, 2,6‐lutidine assists the heterolytic O?O bond cleavage of the metal‐bound alkylperoxo, giving rise to a reactive metal‐based oxidant. The roles of the urea groups on the supporting ligand, and of the base, in directing the selective and catalytic oxygenation of hydrocarbon substrates by 2 are discussed.     

Ruthenium complexes of 1,4,7-trimethyl-1,4,7-triazacyclononane for atom and group transfer reactions

With support by macrocyclic tertiary amine ligand 1,4,7-trimethyl-1,4,7-triazacyclononane (Me₃tacn), a number of mononuclear metal–ligand multiple bonded complexes have been isolated. Starting with a brief summary of these complexes, the present review focuses on ruthenium-oxo and -imido complexes of Me₃tacn. A family of monooxoruthenium(IV) complexes [Ru^IV(Me₃tacn)O(N–N)]²⁺ (N–N = 2,2′-bipyridines) and a cis-dioxoruthenium(VI) complex cis-[Ru^VI(Me₃tacn)O₂(CF₃CO₂)]⁺ have been isolated, and the structures of [Ru^IV(Me₃tacn)O(bpy)](ClO₄)₂ (bpy = 2,2′-bipyridine) and cis-[Ru^VI(Me₃tacn)O₂(CF₃CO₂)]ClO₄ have been determined by X-ray crystallography. Oxidation of [Ru^III(Me₃tacn)(NHTs)₂(OH)] (Ts = p-toluenesulfonyl) with Ag⁺ and electrochemical oxidation of [Ru^III(Me₃tacn)(H₂L)](ClO₄)₂ (H₃L = α-(1-amino-1-methylethyl)-2-pyridinemethanol) are likely to generate ruthenium-imido complexes supported by Me₃tacn. DFT calculations on cis-[Ru^VI(Me₃tacn)O₂(CF₃CO₂)]⁺ and proposed ruthenium-imido complexes have been performed. Complexes [Ru^IV(Me₃tacn)O(N–N)]²⁺ are reactive toward alkene epoxidation, and cis-[Ru^VI(Me₃tacn)O₂(CF₃CO₂)]⁺ efficiently oxidizes various organic substrates including concerted [3+2] cycloaddition reactions with alkynes and alkenes to selectively afford α,β-diketones, cis-diols, or CC bond cleavage products. Related oxidation reactions catalyzed by ruthenium Me₃tacn complexes include epoxidation of alkenes, cis-dihydroxylation of alkenes, oxidation of alkanes, alcohols, aldehydes, and arenes, and oxidative cleavage of CC, CC, and C–C bonds, all of which exhibit high selectivity. Ruthenium Me₃tacn complexes are also active catalysts for amination of saturated C–H bonds.     

Synthesis of LnII‐in‐Cryptand Complexes by Chemical Reduction of LnIII‐in‐Cryptand Precursors: Isolation of a NdII‐in‐Cryptand Complex

Lanthanide triflates have been used to incorporate Nd^III and Sm^III ions into the 2.2.2‐cryptand ligand (crypt) to explore their reductive chemistry. The Ln(OTf)₃ complexes (Ln=Nd, Sm; OTf=SO₃CF₃) react with crypt in THF to form the THF‐soluble complexes [Ln^III(crypt)(OTf)₂][OTf] with two triflates bound to the metal encapsulated in the crypt. Reduction of these Ln^III‐in‐crypt complexes using KC₈ in THF forms the neutral Ln^II‐in‐crypt triflate complexes [Ln^II(crypt)(OTf)₂]. DFT calculations on [Nd^II(crypt)]²⁺], the first Nd^II cryptand complex, assign a 4f⁴ electron configuration to this ion.     

Fluorimetric Detection of Phosphates in Water Using a Disassembly Approach: A Comparison of FeIII-, ZnII-, MnII- and MnIII-salen Complexes

Details of the reaction sequence used for the fluorimetric detection of phosphates by disassembly of transition metal Schiff base complexes were investigated for [Fe^III(salen)(H₂O)]⁺, [Zn^II(salen)], [Mn^II(salen)(H₂O)₂], and [Mn^III(salen)(H₂O)]⁺. The reactivity of these compounds towards phosphorus oxoanions of differing charge, number of donor atoms and steric hindrance was detected by UV/Vis and fluorescence spectroscopy in both aprotic organic and aqueous media. Selectivity of [Fe^III(salen)(H₂O)]⁺ towards pyrophosphate over all other tested phosphorus-containing analytes was strongly supported. [Zn^II(salen)] showed a faster reactivity but was much less selective. In contrast, [Mn^III(salen)(H₂O)]⁺ proved to be more stable than the iron complex but generally showed little reactivity towards phosphorus oxoanions. The influence of the charge of the central atom was investigated using the Mn^II analogue [Mn^II(salen)(H₂O)₂]. As expected, the reduced charge resulted in a reactivity comparable to the Zn^II complex in organic solution but lead to hydrolysis of the complex in water. Finally, the reaction products of [Fe^III(salen)(H₂O)]⁺ with phosphates were characterized by IR spectroscopy and mass spectrometry, providing further insights into the reaction mechanism of the disassembly process.     

Spectroscopic,Electrochemical and Computational Characterisation of Ru Species Involved in Catalytic Water Oxidation: Evidence for a [RuV(O)(Py2Metacn)] Intermediate

A new family of ruthenium complexes based on the N‐pentadentate ligand Py₂^Metacn (N‐methyl‐N′,N′′‐bis(2‐picolyl)‐1,4,7‐triazacyclononane) has been synthesised and its catalytic activity has been studied in the water‐oxidation (WO) reaction. We have used chemical oxidants (ceric ammonium nitrate and NaIO₄) to generate the WO intermediates [Ru^II(OH₂)(Py₂^Metacn)]²⁺, [Ru^III(OH₂)(Py₂^Metacn)]³⁺, [Ru^III(OH)(Py₂^Metacn)]²⁺ and [Ru^IV(O)(Py₂^Metacn)]²⁺, which have been characterised spectroscopically. Their relative redox and pH stability in water has been studied by using UV/Vis and NMR spectroscopies, HRMS and spectroelectrochemistry. [Ru^IV(O)(Py₂^Metacn)]²⁺ has a long half‐life (>48 h) in water. The catalytic cycle of WO has been elucidated by using kinetic, spectroscopic, ¹⁸O‐labelling and theoretical studies, and the conclusion is that the rate‐determining step is a single‐site water nucleophilic attack on a metal‐oxo species. Moreover, [Ru^IV(O)(Py₂^Metacn)]²⁺ is proposed to be the resting state under catalytic conditions. By monitoring Ce^IV consumption, we found that the O₂ evolution rate is redox‐controlled and independent of the initial concentration of Ce^IV. Based on these facts, we propose herein that [Ru^IV(O)(Py₂^Metacn)]²⁺ is oxidised to [Ru^V(O)(Py₂^Metacn)]²⁺ prior to attack by a water molecule to give [Ru^III(OOH)(Py₂^Metacn)]²⁺. Finally, it is shown that the difference in WO reactivity between the homologous iron and ruthenium [M(OH₂)(Py₂^Metacn)]²⁺ (M=Ru, Fe) complexes is due to the difference in the redox stability of the key M^V(O) intermediate. These results contribute to a better understanding of the WO mechanism and the differences between iron and ruthenium complexes in WO reactions.     

Synthesis and reactivity of cyclo-tetra(stibinophosphonium) tetracations: redox and coordination chemistry of phosphine–antimony complexes

Reductive elimination of [R₃PPR₃]²⁺, [11(R)]²⁺, from the highly electrophilic Sb^III centres in [(R₃P)₃Sb]³⁺, [8(R)]³⁺, gives Sb^I containing cations [(R₃P)Sb]¹⁺, [9(R)]¹⁺, which assemble into frameworks identified as cyclo-tetra(stibinophosphonium) tetracations, [(R₃P)₄Sb₄]⁴⁺, [10(R)]⁴⁺. A phosphine catalyzed mechanism is proposed for conversion of fluoroantimony complexes [(R₃P)₂SbF]²⁺, [7(R)]²⁺, to [10(R)]⁴⁺, and the characterization of key intermediates is presented. The results constitute evidence of a novel ligand activation pathway for phosphines in the coordination sphere of hard, electron deficient acceptors. Characterization of the associated reactants and products supports earlier, albeit less definitive, detection of analogous phosphine ligand activation in Cu^III and Tl^III complexes, demonstrating that these prototypical ligands can behave simultaneously as reducing agents and σ donors towards a variety of hard acceptors. The reactivity of the parent cyclo-tetra(stibinophosphonium) tetracation, [10(Me)]⁴⁺, is directed by high charge concentration and strong polarization of the P–Sb bonds. The former explains the observed facility for reductive elimination to yield elemental antimony and the latter enabled activation of P–Cl and P–H bonds to give phosphinophosphonium cations, [Me₃PPR′2]¹⁺, including the first example of an H-phosphinophosphonium, [(Me₃P)P(H)R′]¹⁺, and 2-phosphino-1,3-diphosphonium cations, [(Me₃P)₂PR′]²⁺. Exchange of a phosphine ligand in [10(Me)]⁴⁺ with [nacnac]^1– gives [(Me₃P)₃Sb₄(nacnac)]³⁺, [15(Me)]³⁺, and with dmap gives [(Me₃P)₃Sb₄(dmap)]⁴⁺, [16]⁴⁺. The lability of P–Sb or Sb–Sb interactions in [10(Me)]⁴⁺ has also been illustrated by characterization of heteroleptically substituted derivatives featuring PMe₃ and PEt₃ ligands.     

Tuning the reactivity of mononuclear nonheme manganese(iv)-oxo complexes by triflic acid

Triflic acid (HOTf)-bound nonheme Mn(iv)-oxo complexes, [(L)Mn^IV(O)]²⁺–(HOTf)₂ (L = N4Py and Bn-TPEN; N4Py = N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine and Bn-TPEN = N-benzyl-N,N′,N′-tris(2-pyridylmethyl)ethane-1,2-diamine), were synthesized by adding HOTf to the solutions of the [(L)Mn^IV(O)]²⁺ complexes and were characterized by various spectroscopies. The one-electron reduction potentials of the Mn^IV(O) complexes exhibited a significant positive shift upon binding of HOTf. The driving force dependences of electron transfer (ET) from electron donors to the Mn^IV(O) and Mn^IV(O)–(HOTf)₂ complexes were examined and evaluated in light of the Marcus theory of ET to determine the reorganization energies of ET. The smaller reorganization energies and much more positive reduction potentials of the [(L)Mn^IV(O)]²⁺–(HOTf)₂ complexes resulted in greatly enhanced oxidation capacity towards one-electron reductants and para-X-substituted-thioanisoles. The reactivities of the Mn(iv)-oxo complexes were markedly enhanced by binding of HOTf, such as a 6.4 × 10⁵-fold increase in the oxygen atom transfer (OAT) reaction (i.e., sulfoxidation). Such a remarkable acceleration in the OAT reaction results from the enhancement of ET from para-X-substituted-thioanisoles to the Mn^IV(O) complexes as revealed by the unified ET driving force dependence of the rate constants of OAT and ET reactions of [(L)Mn^IV(O)]²⁺–(HOTf)₂. In contrast, deceleration was observed in the rate of H-atom transfer (HAT) reaction of [(L)Mn^IV(O)]²⁺–(HOTf)₂ complexes with 1,4-cyclohexadiene as compared with those of the [(L)Mn^IV(O)]²⁺ complexes. Thus, the binding of two HOTf molecules to the Mn^IV(O) moiety resulted in remarkable acceleration of the ET rate when the ET is thermodynamically feasible. When the ET reaction is highly endergonic, the rate of the HAT reaction is decelerated due to the steric effect of the counter anion of HOTf.     

Olefin epoxidation catalyzed by [Ru(TDL)(tmeda)H2O] complexes (TDL = tridentate Schiff-base ligand; tmeda = tetramethylethylenediamine)

Mixed-chelate complexes of ruthenium have been synthesized using tridentate Schiff-base ligands (TDLs) derived from condensation of 2-aminophenol or 2-aminobenzoic acid with aldehydes (salicyldehyde, 2-pyridinecarboxaldehyde), and tmeda (tetramethylethylenediamine). [Ru^III(hpsd)(tmeda)(H₂O)]⁺ (1), [Ru^III(hppc)(tmeda)(H₂O)]²⁺ (2), [Ru^III(cpsd)(tmeda)(H₂O)]⁺ (3) and [Ru^III(cppc)(tmeda)(H₂O)]²⁺ (4) complexes (where hpsd²⁻ = N-(hydroxyphenyl)salicylaldiminato); hppc⁻ = N-(2-hydroxyphenylpyridine-2-carboxaldiminato); cpsd²⁻ = (N-(2-carboxyphenyl)salicylaldiminato); cppc⁻ = N-2-carboxyphenylpyridine-2-carboxaldiminato) were characterized by microanalysis, spectral (IR and UV–vis), conductance, magnetic moment and electrochemical studies. Complexes 1–4 catalyzed the epoxidation of cyclohexene, styrene, 4-chlorostyrene, 4-methylstyrene, 4-methoxystyrene, 4-nitrostyrene, cis- and trans-stilbenes effectively at ambient temperature using tert-butylhydroperoxide (t-BuOOH) as terminal oxidant. On the basis of Hammett correlation (log k_rel vs. σ⁺) and product analysis, a mechanism involving intermediacy of a [Ru–O–OBu^t] radicaloid species is proposed for the catalytic epoxidation process.     

Graphene related magnetic materials: micromechanical exfoliation of 2D layered magnets based on bimetallic anilate complexes with inserted [FeIII(acac2-trien)]+ and [FeIII(sal2-trien)]+ molecules

The syntheses, structures and magnetic properties of the coordination compounds of formula [Fe^III(acac₂-trien)][Mn^IICr^III(Cl₂ An)₃]·(CH₃CN)₂ (1), [Fe^III(acac₂-trien)][Mn^IICr^III(Br₂An)₃]·(CH₃CN)₂ (2) and [Ga^III(acac₂-trien)][Mn^IICr^III(Br₂An)₃]·(CH₃CN)₂ (3) are reported. They exhibit a 2D anionic network formed by Mn(ii) and Cr(iii) ions linked through anilate ligands, while the [Fe^III(acac₂-trien)]⁺ or [Ga^III(acac₂-trien)]⁺ charge-compensating cations are placed inside the hexagonal channels of the 2D network, instead of being inserted in the interlamellar spacing. Thus, these crystals are formed by hybrid layers assembled through van der Waals interactions. The magnetic properties indicate that these compounds behave as magnets exhibiting a long-range ferrimagnetic ordering at ca. 11 K, while the inserted Fe(iii) cations remain in the high-spin state. As for graphene, these layered materials can be exfoliated in atomically-thin layers with heights down to 2 nm by using the well-known Scotch tape method. Hence, this micromechanical procedure provides a suitable way to isolate ultrathin layers of this kind of graphene related magnetic materials. Interestingly, this method can also be successfully used to exfoliate the 2D anilate-based compound [Fe^III(sal₂-trien)][Mn^IICr^III(Cl₂An)₃]·solv (4), which exhibits the typical alternated cation/anion layered structure. This result shows that the micromechanical exfoliation method, which has been extensively used for exfoliating van der Waals layered solids, can also be useful for exfoliating layered coordination compounds, even when they are formed by ionic components.     

Assessing the exchange coupling in binuclear lanthanide(iii) complexes and the slow relaxation of the magnetization in the antiferromagnetically coupled Dy2 derivative

We report here the synthesis and the investigation of the magnetic properties of a series of binuclear lanthanide complexes belonging to the metallacrown family. The isostructural complexes have a core structure with the general formula [Ga₄Ln₂(shi^3–)₄(Hshi^2–)₂(H₂shi^–)₂(C₅H₅N)₄(CH₃OH)_x(H₂O)_x]·xC₅H₅N·xCH₃OH·xH₂O (where H₃shi = salicylhydroxamic acid and Ln = Gd^III1; Tb^III2; Dy^III3; Er^III4; Y^III5; Y^III_0.9Dy^III_0.16). Apart from the Er-containing complex, all complexes exhibit an antiferromagnetic exchange coupling leading to a diamagnetic ground state. Magnetic studies, below 2 K, on a single crystal of 3 using a micro-squid array reveal an opening of the magnetic hysteresis cycle at zero field. The dynamic susceptibility studies of 3 and of the diluted DyY 6 complexes reveal the presence of two relaxation processes for 3 that are due to the excited ferromagnetic state and to the uncoupled Dy^III ions. The antiferromagnetic coupling in 3 was shown to be mainly due to an exchange mechanism, which accounts for about 2/3 of the energy gap between the antiferro- and the ferromagnetic states. The overlap integrals between the Natural Spin Orbitals (NSOs) of the mononuclear fragments, which are related to the magnitude of the antiferromagnetic exchange, are one order of magnitude larger for the Dy₂ than for the Er₂ complex.     

Reactivity of the unsaturated manganese dihydrides [Mn2(μ-H)2(CO)6(μ-L2)] [L2 = (EtO)2POP(OEt)2, Ph2PCH2PPh2, Me2PCH2PMe2] toward silicon and tin hydrides

The dimanganese hydride complexes [Mn₂(μ-H)₂(CO)₆(μ-L₂)] [L₂ = (EtO)₂POP(OEt)₂ (tedip), Ph₂PCH₂PPh₂ (dppm)] react with primary and secondary silanes H₂SiPhR (R = Ph, Me, H) to give the corresponding derivatives [Mn₂(μ-H₂SiPhR)(CO)₆(μ-L₂)] having a silane molecule displaying a relatively unusual μ-κ²:κ² coordination mode (averaged values are ca. Mn-H = 1.59 Å, H-Si = 1.69 Å and Mn-Si = 2.381 Å, when R = Ph and L₂ = tedip). These complexes display in solution cis and/or trans arrangement of the bridging silane relative to the diphosphorus ligands (and facial and/or meridional arrangements of the corresponding carbonyl ligands), depending on the bridging groups. The novel unsaturated dihydride [Mn₂(μ-H)₂(CO)₆(μ-dmpm)] (dmpm = Me₂PCH₂PMe₂) has been prepared through the reaction of [Mn₂(μ-Cl)₂(μ-dmpm)(CO)₆] and 5 equiv of Li[BH₂Me₂] in tetrahydrofuran followed by addition of water. The dihydride complexes [Mn₂(μ-H)₂(CO)₆(μ-L₂)] (L₂ = tedip, dppm, dmpm) react with HSnPh₃ to give different mixtures of products strongly dependent on the particular reaction conditions. We have thus been able to isolate and characterize five new types of dimanganese-tin derivatives: [Mn₂(μ-SnPh₂)₂(CO)₆(μ-L₂)], [Mn₂(μ-H)(μ-Ph₂SnO(H)SnPh₂)(CO)₆(μ-L₂)] (average values are Mn-Sn = 2.54 Å, Sn-O = 2.11 Å, when L₂ = tedip), [Mn₂(μ-H)(μ-κ¹:κ²-HSnPh₂)(CO)₆(μ-L₂)], [Mn₂(μ-H)(μ-κ¹:κ¹-O(H)SnPh₂)(CO)₆(μ-L₂)], and [Mn₂(μ-H)(SnPh₃)(CO)₇(μ-L₂)] (Mn-Mn = 3.237(1) Å, Mn-Sn = 2.642(1) Å, when L₂ = dppm).     

Synthesis of LnII-in-Cryptand Complexes by Chemical Reduction of LnIII-in-Cryptand Precursors: Isolation of a NdII-in-Cryptand Complex

Lanthanide triflates have been used to incorporate Nd^III and Sm^III ions into the 2.2.2-cryptand ligand (crypt) to explore their reductive chemistry. The Ln(OTf)₃ complexes (Ln=Nd, Sm; OTf=SO₃CF₃) react with crypt in THF to form the THF-soluble complexes [Ln^III(crypt)(OTf)₂][OTf] with two triflates bound to the metal encapsulated in the crypt. Reduction of these Ln^III-in-crypt complexes using KC₈ in THF forms the neutral Ln^II-in-crypt triflate complexes [Ln^II(crypt)(OTf)₂]. DFT calculations on [Nd^II(crypt)]²⁺], the first Nd^II cryptand complex, assign a 4f⁴ electron configuration to this ion.     

Electrochemical behaviour of [Ru(L)(CO)2Cl2] [Ru(L)(CO)Cl3][Me4N] and [Ru(L)(CO)2(CH3CN)2][CF3SO3]2 complexes (L = 2,2′- bipyridine or 4,4′-isopropoxycarbonyl-2,2′-bipyridine)

The clectrochemical behaviour of the complexes [Ru^II(L)(CO)₂Cl₂], [Ru^II(L)(CO)Cl₃][Me₄N] and [Ru^II(L)(CO)₂(CH₃CN)₂][CF₃SO₃]₂ (L = 2,2′-bipyridine or 4,4′-isopropoxycarbonyl-2,2′-bipyridine) has been investigated in CH₃CN. The oxidation of [Ru(L)(CO)₂Cl₂] produces new complexes [Ru^III(L)(CO)(CH₃CN)₂Cl]²⁺ as a consequence of the instability of the electrogenerated transient Ru^III species [Ru^III(L)(CO)₂Cl₂]⁺. In contrast, the oxidation of [Ru^II(L)(CO)Cl₃][Me₄N] produces the stable [Ru^III(L)(CO)Cl₃] complex. In contrast [Ru^II(L)(CO)₂(CH₃CN)₂][CF₃SO₃]₂ is not oxidized in the range up to the most positive potentials achievable. The reduction of [Ru^II(L)(CO)₂Cl₂] and [Ru^II(L)(CO)₂(CH₃CN)₂][CF₃SO₃]₂ results in the formation of identical dark blue strongly adherent electroactive films. These films exhibit the characteristics of a metal-metal bond dimer structure. No films are obtained on reduction of [Ru^II(L)(CO)Cl₃][Me₄N]. The effect of the substitution of the bipyridine ligand by electron-withdrawing carboxy ester groups on the electrochemical behaviour of all these complexes has also been investigated.     

Robust and efficient amide-based nonheme manganese(III) hydrocarbon oxidation catalysts: substrate and solvent effects on involvement and partition of multiple active oxidants

Two new mononuclear nonheme manganese(III) complexes of tetradentate ligands containing two deprotonated amide moieties, [Mn(bpc)Cl(H₂O)] ( 1 ) and [Mn(Me₂bpb)Cl(H₂O)] ? CH₃OH ( 2 ), were prepared and characterized. Complex 2 has also been characterized by X‐ray crystallography. Magnetic measurements revealed that the complexes are high spin (S=5/2) Mn^III species with typical magnetic moments of 4.76 and 4.95 μ_B, respectively. These nonheme Mn^III complexes efficiently catalyzed olefin epoxidation and alcohol oxidation upon treatment with MCPBA under mild experimental conditions. Olefin epoxidation by these catalysts is proposed to involve the multiple active oxidants Mn^V?O, Mn^IV?O, and Mn^III? OO(O)CR. Evidence for this approach was derived from reactivity and Hammett studies, KIE (k_H/k_D) values, H₂¹⁸O‐exchange experiments, and the use of peroxyphenylacetic acid as a mechanistic probe. In addition, it has been proposed that the participation of Mn^V?O, Mn^IV?O, and Mn^III? OOR could be controlled by changing the substrate concentration, and that partitioning between heterolysis and homolysis of the O? O bond of a Mn‐acylperoxo intermediate (Mn? OOC(O)R) might be significantly affected by the nature of solvent, and that the O? O bond of the Mn? OOC(O)R might proceed predominantly by heterolytic cleavage in protic solvent. Therefore, a discrete Mn^V?O intermediate appeared to be the dominant reactive species in protic solvents. Furthermore, we have observed close similarities between these nonheme Mn^III complex systems and Mn(saloph) catalysts previously reported, suggesting that this simultaneous operation of the three active oxidants might prevail in all the manganese‐catalyzed olefin epoxidations, including Mn(salen), Mn(nonheme), and even Mn(porphyrin) complexes. This mechanism provides the greatest congruity with related oxidation reactions by using certain Mn complexes as catalysts.     

Salicylaldoxime in manganese(III) carboxylate chemistry: Synthesis, structural characterization and physical studies of hexanuclear and polymeric complexes

The use of salicylaldehyde oxime (H₂salox) in manganese(III) carboxylate chemistry has yielded new members of the family of hexanuclear compounds presenting the [Mn₆(μ₃-O)₂(μ₂-OR)₂]¹²⁺ core, complexes [Mn^III₆(μ₃-O)₂(O₂CPh)₂(salox)₆(L₁)₂(L₂)₂] (L₁ = py, L₂ = H₂O (1); L₁ = Me₂CO, L₂ = H₂O (2); L₁ = L₂ = MeOH (3)). Addition of NaOMe to the acetonitrile reaction mixture, afforded the 1D complex [Mn^III₃Na(μ₃-O)(O₂CPh)₂(salox)₃(MeCN)]_n (4), whereas addition of NaClO₄ to the acetone reaction mixture afforded an analogous 1D complex [Mn^III₃Na(μ₃-O)(O₂CPh)₂(salox)₃(Me₂CO)]_n (5). The structures of 1–3 present the [Mn₆(μ₃-O)₂(μ₂-OR)₂]¹²⁺ core and can be described as two [Mn₃(μ₃-O)]⁷⁺ triangular subunits linked by two μ₂-oximato oxygen atoms of the salox²⁻ ligands, which show the less common μ₃-κ²O:κO′:κN coordination mode. The benzoato ligands are coordinated through the usual syn,syn-μ₂-κO:κO′ mode. The 1D polymeric structures of 4 and 5 consist of alternating [Mn₃(μ₃-O)]⁷⁺ subunits and Na⁺ atoms linked through two μ₃-κ²O:κO′:κN and one μ₄-κ²O:κ²O′:κN salox²⁻ ligands as well as one syn,anti-μ₂-κO:κO′ benzoato ligand. DC and AC magnetic susceptibility studies on 1 revealed the stabilization of an S = 4 ground state, and indications of single-molecule magnetism behavior, whereas the DC experimental data from polycrystalline sample of 5 are indicative of antiferromagnetic interactions within the [Mn₃] subunit. Solid state ¹H NMR data of 1 were used to probe the spin-lattice relaxation of the system.     

Characterization and reactivity study of non-heme high-valent iron–hydroxo complexes

A terminal Fe^IIIOH complex, [Fe^III(L)(OH)]²⁻ (1), has been synthesized and structurally characterized (H₄L = 1,2-bis(2-hydroxy-2-methylpropanamido)benzene). The oxidation reaction of 1 with one equiv. of tris(4-bromophenyl)ammoniumyl hexachloroantimonate (TBAH) or ceric ammonium nitrate (CAN) in acetonitrile at −45 °C results in the formation of a Fe^IIIOH ligand radical complex, [Fe^III(L˙)(OH)]⁻ (2), which is hereby characterized by UV-visible, ¹H nuclear magnetic resonance, electron paramagnetic resonance, and X-ray absorption spectroscopy techniques. The reaction of 2 with a triphenylcarbon radical further gives triphenylmethanol and mimics the so-called oxygen rebound step of Cpd II of cytochrome P450. Furthermore, the reaction of 2 was explored with different 4-substituted-2,6-di-tert-butylphenols. Based on kinetic analysis, a hydrogen atom transfer (HAT) mechanism has been established. A pK_a value of 19.3 and a BDFE value of 78.2 kcal/mol have been estimated for complex 2.

One-electron oxidation of an Fe^III–OH complex (1) results in the formation of a Fe^III–OH ligand radical complex (2). Its reaction with (C₆H₅)₃C˙ results in the formation of (C₆H₅)₃COH, which is a functional mimic of compound II of cytochrome P450.     

Rational enhancement of the energy barrier of bis(tetrapyrrole) dysprosium SMMs via replacing atom of porphyrin core

With the coordination geometry of Dy^III being relatively fixed, oxygen and sulfur atoms were used to replace one porphyrin pyrrole nitrogen atom of sandwich complex [(Bu)₄N][Dy^III(Pc)(TBPP)] [Pc = dianion of phthalocyanine, TBPP = 5,10,15,20-tetrakis[(4-tert-butyl)phenyl]porphyrin]. The energy barrier of the compounds was enhanced three times, with the order of Dy^III(Pc)(STBPP) > Dy^III(Pc)(OTBPP) > [(Bu)₄N][Dy^III(Pc)(TBPP)] [STBPP = monoanion of 5,10,15,20-(4-tert-butyl)phenyl-21-thiaporphyrin, OTBPP = monoanion of 5,10,15,20-(4-tert-butyl)phenyl-21-oxaporphyrin]. Theoretical calculations offer reasonable explanations of such a significant enhancement. The energy barrier of 194 K for Dy^III(Pc)(STBPP) represents the highest one among all the bis(tetrapyrrole) dysprosium SMMs, providing a strategy to rationally enhance the anisotropy and energy barrier via atom replacement.     

Synthesis, characterisation and catalytic activities of manganese(III) complexes of pyridoxal-based ONNO donor tetradenatate ligands

Reaction of Mn^II(CH₃COO)₂ with dibasic tetradentate ligands, N,N′-ethylenebis(pyridoxylideneiminato) (H₂pydx-en, I), N,N′-propylenebis(pyridoxylideneiminato) (H₂pydx-1,3-pn, II) and 1-methyl-N,N′-ethylenebis(pyridoxylideneiminato) (H₂pydx-1,2-pn, III) followed by aerial oxidation in the presence of LiCl gives complexes [Mn^III(pydx-en)Cl(H₂O)] (1) [Mn^III(pydx-1,3-pn)Cl(CH₃OH)] (2) and [Mn^III(pydx-1,2-pn)Cl(H₂O)] (3), respectively. Crystal and molecular structures of [Mn(pydx-en)Cl(H₂O)] (1) and [Mn(pydx-1,3-pn)Cl(CH₃OH)] (2) confirm their octahedral geometry and the coordination of ligands through ONNO(2-) form. Reaction of manganese(II)-exchanged zeolite-Y with these ligands in refluxing methanol followed by aerial oxidation in the presence of NaCl leads to the formation of the corresponding zeolite-Y encapsulated complexes, abbreviated herein as [Mn^III(pydx-en)]-Y (4), [Mn^III(pydx-1,3-pn)]-Y (5) and [Mn^III(pydx-1,2-pn)]-Y (6). These encapsulated complexes are used as catalysts for the oxidation, by H₂O₂, of methyl phenyl sulfide, styrene and benzoin efficiently. Oxidation of methyl phenyl sulfide under the optimized reaction conditions gave ca. 86% conversion with two major products methyl phenyl sulfoxide and methyl phenyl sulfone in the ca. 70% and 30% selectivity, respectively. Oxidation of styrene catalyzed by these complexes gave at least five products namely styrene oxide, benzaldehyde, benzoic acid, 1-phenylethane-1,2-diol and phenylacetaldehyde with a maximum of 76.9% conversion of styrene by 4, 76.3% by 5 and 76.0% by 6 under optimized conditions. The selectivity of the obtained products followed the order: benzaldehyde > benzoic acid > styrene oxide > phenylacetaldehyde > 1-phenylethane-1,2-diol. Similarly, ca. 93% conversion of benzoin was obtained by these catalysts, where the selectivity of the products followed the order benzil > benzoic acid > benzaldehyde-dimethylacetal. Tests for the recyclability and heterogeneity of the reactions have also been carried. Neat complexes are equally active. However, the recycle ability of encapsulated complexes makes them better over neat ones.