Oxidation in vitro of chromium(III) dietary supplements <Emphasis Type="Italic">mer</Emphasis>-[Cr(pic)<Subscript>3</Subscript>] and <Emphasis Type="Italic">trans</Emphasis>(S,S)-[Cr(Cys)<Subscript>2</Subscript>]<Superscript>−</Superscript> by hydrogen peroxide

Biological tests performed using 3T3 fibroblasts indicated low cytotoxicities for the complexes mer-[Cr(pic)₃] and trans(S,S)-[Cr(Cys)₂]^?, where pic = picolinate anion and Cys = cysteine. Oxidation of these complexes by hydrogen peroxide was studied in NaOH and NaHCO₃ media. Electronic (UV–Vis) and EPR spectroscopies were used to monitor the reaction course. Hydrogen peroxide oxidizes chromium(III) to both [Cr^V(O₂)₄]^3? and Cr^VIO₄ ^2? anions in alkaline media and practically completely to CrO₄ ^2? anion in bicarbonate solution. The reactions follow consecutive biphasic or simple first-order kinetics. The first-order decay of [Cr^V(O₂)₄]^3? anion at pH ≈ 8 was followed by EPR spectroscopy. Based on the obtained kinetic and spectroscopic data, mechanisms for the redox transformations of these chromium(III) complexes are proposed.     

High-Voltage Polyanion Positive Electrode Materials

High-voltage generation (over 4 V versus Li⁺/Li) of polyanion-positive electrode materials is usually achieved by Ni³⁺/Ni²⁺, Co³⁺/Co²⁺, or V⁴⁺/V³⁺ redox couples, all of which, however, encounter cost and toxicity issues. In this short review, our recent efforts to utilize alternative abundant and less toxic Fe³⁺/Fe²⁺ and Cr⁴⁺/Cr³⁺ redox couples are summarized. Most successful examples are alluaudite Na₂Fe₂(SO₄)₃ (3.8 V versus sodium and hence 4.1 V versus lithium) and β₁-Na₃Al₂(PO₄)₂F₃-type Na₃Cr₂(PO₄)₂F₃ (4.7 V versus sodium and hence 5.0 V versus lithium), where maximizing ΔG by edge-sharing Fe³⁺-Fe³⁺ Coulombic repulsion and the use of the 3d²/3d³ configuration of Cr⁴⁺/Cr³⁺ are essential for each case. Possible exploration of new high-voltage cathode materials is also discussed.     

过渡金属取代的钨铝杂多配合物的制备、表征和性质

用分步设计法合成了以铝为中心原子的过渡元素与钨的三元杂多配合物,经ICP、TG分析确定其化学式为K_4，6，7[AlM(OH₂)W₁₁O₃₉]·xH₂O(M=V⁵⁺、Cr³⁺、Mn²⁺、Fe³⁺、Co²⁺、Ni²⁺、Cu²⁺、Zn²⁺、Cd²⁺)。采用IR、UV、XRD、¹⁸³W和²⁷Al NMR等对配合物的结构进行了表征,表明配合物具有Keggin结构；循环伏安法对该系列配合物的氧化还原性质研究表明,其氧化还原过程为不可逆的两电子还原,配合物的磁化率测试均表现为顺磁性,还对其热稳定性进行了讨论。     

The dependence of the kinetics of some simple outer-sphere electrode reactions on the nature of the electrode material

The kinetics of a number of simple inorganic electrode reactions that are known or expected to follow outer-sphere pathways have been examined at mercury, silver, platinum, and gold-aqueous interfaces in order to explore the effects of varying the electrode material on outer-sphere reactivity. The electroreduction kinetics of Co(III) ammine complexes exhibited only mild dependences on the nature of the electrode material which were compatible with the expected variations in double-layer effects. However, the electrooxidation of Cr²⁺ proceeded at strikingly higher overpotentials on the solid surfaces compared with mercury electrodes. Similar effects were also seen for the electrooxidation of V²⁺, Eu²⁺ and Ru²⁺ in the presence of Cr²⁺. Much larger rate constants were observed for these aquo reactions at solid surfaces in the absence of Cr²⁺, although Cr²⁺ had no influence on Co(NH₃)₆³⁺ electroreduction, or any reaction at mercury electrodes. It is speculated that the very large substrate effects upon the electrode kinetics of aquo couples arise from the influence of the inner-layer water structure on the reactant-solvent interactions experienced by these “structure-making” reactants at their plane of closest approach. The inhibiting influence of Cr²⁺ may be due to its ability to efficiently remove adsorbed catalytic contaminants by incorporation into a substitutionally inert Cr(III) electrooxidation product by means of a ligand-bridge mechanism.     

Thermodynamic Solution Properties of a Biodegradable Chelant (L-glutamic-N,N-diacetic Acid,L-GLDA) and Its Sequestering Ability toward Cd2+

The thermodynamics of the interaction of L-glutamic-N,N-diacetic acid (GLDA) with protons was studied potentiometrically at different temperatures, ionic strengths and ionic media. Four protonation constants and corresponding enthalpy changes occurred at infinite dilution together with temperature and ionic strength coefficients. The medium effect was also interpreted in terms of the formation of weak complexes between the ligand and the cations of supporting electrolytes, resulting in a greater tendency of GLDA to chemically interact with Na⁺ rather than K⁺ and, in turn, (CH₃)₄N⁺. Formation constants of GLDA with Cd²⁺ were determined in NaCl_(aq) at different ionic strength values. Five complex species were found, namely CdL²⁻, CdHL⁻, CdH₂L⁰_(aq), Cd₂L⁰_(aq), and Cd(OH)L³⁻, whose formation constant values at infinite dilution were log β = 12.68, 17.61, 20.76, 17.52, and 1.77, respectively. All the species results were relevant in the pH range of natural waters, although the Cd₂L⁰_(aq) was observed only for C_Cd ≥ C_GLDA and concentrations of >0.1 mmol dm⁻³. The sequestering ability of GLDA toward Cd²⁺, evaluated by means of pL_0.5, was maximum at pH~10, whereas the presence of a chloride containing a supporting electrolyte exerted a negative effect. Among new generation biodegradable ligands, GLDA was the most efficient in Cd²⁺ sequestration.     

Semiquinone radical-bridged M2 (M = Fe,Co, Ni) complexes with strong magnetic exchange giving rise to slow magnetic relaxation

The use of radical bridging ligands to facilitate strong magnetic exchange between paramagnetic metal centers represents a key step toward the realization of single-molecule magnets with high operating temperatures. Moreover, bridging ligands that allow the incorporation of high-anisotropy metal ions are particularly advantageous. Toward these ends, we report the synthesis and detailed characterization of the dinuclear hydroquinone-bridged complexes [(Me₆tren)₂M^II₂(C₆H₄O₂²⁻)]²⁺ (Me₆tren = tris(2-dimethylaminoethyl)amine; M = Fe, Co, Ni) and their one-electron-oxidized, semiquinone-bridged analogues [(Me₆tren)₂M^II₂(C₆H₄O₂⁻˙)]³⁺. Single-crystal X-ray diffraction shows that the Me₆tren ligand restrains the metal centers in a trigonal bipyramidal geometry, and coordination of the bridging hydro- or semiquinone ligand results in a parallel alignment of the three-fold axes. We quantify the p-benzosemiquinone–transition metal magnetic exchange coupling for the first time and find that the nickel(ii) complex exhibits a substantial J < −600 cm⁻¹, resulting in a well-isolated S = 3/2 ground state even as high as 300 K. The iron and cobalt complexes feature metal–semiquinone exchange constants of J = −144(1) and −252(2) cm⁻¹, respectively, which are substantially larger in magnitude than those reported for related bis(bidentate) semiquinoid complexes. Finally, the semiquinone-bridged cobalt and nickel complexes exhibit field-induced slow magnetic relaxation, with relaxation barriers of U_eff = 22 and 46 cm⁻¹, respectively. Remarkably, the Orbach relaxation observed for the Ni complex is in stark contrast to the fast processes that dominate relaxation in related mononuclear Ni^II complexes, thus demonstrating that strong magnetic coupling can engender slow magnetic relaxation.

A semiquinone radical bridging two trigonal bipyramidal metal centers facilitates strong magnetic exchange and single-molecule magnet behavior.     

Towards Reversible High-Voltage Multi-Electron Reactions in Alkali-Ion Batteries Using Vanadium Phosphate Positive Electrode Materials

Vanadium phosphate positive electrode materials attract great interest in the field of Alkali-ion (Li, Na and K-ion) batteries due to their ability to store several electrons per transition metal. These multi-electron reactions (from V²⁺ to V⁵⁺) combined with the high voltage of corresponding redox couples (e.g., 4.0 V vs. for V³⁺/V⁴⁺ in Na₃V₂(PO₄)₂F₃) could allow the achievement the 1 kWh/kg milestone at the positive electrode level in Alkali-ion batteries. However, a massive divergence in the voltage reported for the V³⁺/V⁴⁺ and V⁴⁺/V⁵⁺ redox couples as a function of crystal structure is noticed. Moreover, vanadium phosphates that operate at high V³⁺/V⁴⁺ voltages are usually unable to reversibly exchange several electrons in a narrow enough voltage range. Here, through the review of redox mechanisms and structural evolutions upon electrochemical operation of selected widely studied materials, we identify the crystallographic origin of this trend: the distribution of PO₄ groups around vanadium octahedra, that allows or prevents the formation of the vanadyl distortion (O^…V⁴⁺=O or O^…V⁵⁺=O). While the vanadyl entity massively lowers the voltage of the V³⁺/V⁴⁺ and V⁴⁺/V⁵⁺ couples, it considerably improves the reversibility of these redox reactions. Therefore, anionic substitutions, mainly O²⁻ by F⁻, have been identified as a strategy allowing for combining the beneficial effect of the vanadyl distortion on the reversibility with the high voltage of vanadium redox couples in fluorine rich environments.     

A (μ-hydrido)diborane(4) anion and its coordination chemistry with coinage metals

A tetra(o-tolyl) (μ-hydrido)diborane(4) anion 1, an analogue of [B₂H₅]⁻ species, was facilely prepared through the reaction of tetra(o-tolyl)diborane(4) with sodium hydride. Unlike common sp²–sp³ diborane species, 1 exhibited a σ-B–B bond nucleophilicity towards NHC-coordinated transition-metal (Cu, Ag, and Au) halides, resulting in the formation of η²-B–B bonded complexes 2 as confirmed by single-crystal X-ray analyses. Compared with 1, the structural data of 2 imply significant elongations of B–B bonds, following the order Au > Cu > Ag. DFT studies show that the diboron ligand interacts with the coinage metal through a three-center-two-electron B–M–B bonding mode. The fact that the B–B bond of the gold complex is much prolonged than the related Cu and Ag compounds might be ascribed to the superior electrophilicity of the gold atom.

A tetra(o-tolyl)(μ-hydrido)diborane(4) anion is facilely prepared via the reaction of tetra(o-tolyl)diborane(4) with NaH. It exhibits a σ-B–B bond nucleophilicity towards NHC-metal halides to give the corresponding η²-B–B bonded metal complexes.     

Cadmium-Inspired Self-Polymerization of {LnIIICd2} Units: Structure,Magnetic and Photoluminescent Properties of Novel Trimethylacetate 1D-Polymers (Ln = Sm,Eu, Tb,Dy, Ho,Er, Yb)

A series of heterometallic carboxylate 1D polymers of the general formula [Ln^IIICd₂(piv)₇(H₂O)₂]_n·nMeCN (Ln^III = Sm (1), Eu (2), Tb (3), Dy (4), Ho (5), Er (6), Yb (7); piv = anion of trimethylacetic acid) was synthesized and structurally characterized. The use of Cd^II instead of Zn^II under similar synthetic conditions resulted in the formation of 1D polymers, in contrast to molecular trinuclear complexes with Ln^IIIZn₂ cores. All complexes 1–7 are isostructural. The luminescent emission and excitation spectra for 2–4 have been studied, the luminescence decay kinetics for 2 and 3 was measured. Magnetic properties of the complexes 3–5 and 7 have been studied; 4 and 7 exhibited the properties of field-induced single-molecule magnets in an applied external magnetic field. Magnetic properties of 4 and 7 were modelled using results of SA-CASSCF/SO-RASSI calculations and SINGLE_ANISO procedure. Based on the analysis of the magnetization relaxation and the results of ab initio calculations, it was found that relaxation in 4 predominantly occurred by the sum of the Raman and QTM mechanisms, and by the sum of the direct and Raman mechanisms in the case of 7.     

Tungsten and Molybdenum Heteropolyanions with Different Central Ions—Correlation between Theory and Experiment

Density functional theory calculations were carried out to investigate the electronic structures of Keggin-typed [XMo₁₂O₄₀]ⁿ⁻ and [XW₁₂O₄₀]ⁿ⁻ anions with different heteroatoms (X = Zn²⁺, B³⁺, Al³⁺, Ga³⁺, Si⁴⁺, Ge⁴⁺, P⁵⁺, As⁵⁺, and S⁶⁺). The influence of solvent on redox properties of heteropolyanions was discussed. For [XW₁₂O₄₀]ⁿ⁻ systems two linear correlation: first, between the experimental redox potential and energies of LUMO orbital; and second, between the experimental redox potential and total energy interaction (calculated between internal tetrahedron (XO₄ⁿ⁻), and rest of Kegging anion skeleton, (W₁₂O₃₆)) were designated. Taking into account the similarity of XW₁₂O₄₀ⁿ⁻ and XMo₁₂O₄₀ⁿ⁻ systems (in geometry and electronic structure), the estimated redox potential of molybdenum heteropolyanions (with X being p block elements) in different solvent were proposed.     

A reconstructed porous copper surface promotes selectivity and efficiency toward C2 products by electrocatalytic CO2 reduction

Electrocatalytic synthesis of multicarbon (C₂₊) products from CO₂ reduction suffers from poor selectivity and low energy efficiency. Herein, a facile oxidation–reduction cycling method is adopted to reconstruct the Cu electrode surface with the help of halide anions. The surface composed of entangled Cu nanowires with hierarchical pores is synthesized in the presence of I⁻, exhibiting a C₂ faradaic efficiency (FE) of 80% at −1.09 V vs. RHE. A partial current density of 21 mA cm⁻² is achieved with a C₂ half-cell power conversion efficiency (PCE) of 39% on this electrode. Such high selective C₂ production is found to mainly originate from CO intermediate enrichment inside hierarchical pores rather than the surface lattice effect of the Cu electrode.

The Cu electrode surface is reconstructed by a halide anion assisted method for promoting CO₂ reduction.     

Modelling local structural and electronic consequences of proton and hydrogen-atom uptake in VO2 with polyoxovanadate clusters

We report the synthesis and characterisation of a series of siloxide-functionalised polyoxovanadate–alkoxide (POV–alkoxide) clusters, [V₆O₆(OSiMe₃)(OMe)₁₂]ⁿ (n = 1−, 2−), that serve as molecular models for proton and hydrogen-atom uptake in vanadium dioxide, respectively. Installation of a siloxide moiety on the surface of the Lindqvist core was accomplished via addition of trimethylsilyl trifluoromethylsulfonate to the fully-oxygenated cluster [V₆O₇(OMe)₁₂]²⁻. Characterisation of [V₆O₆(OSiMe₃)(OMe)₁₂]¹⁻ by X-ray photoelectron spectroscopy reveals that the incorporation of the siloxide group does not result in charge separation within the hexavanadate assembly, an observation that contrasts directly with the behavior of clusters bearing substitutional dopants. The reduced assembly, [V₆O₆(OSiMe₃)(OMe)₁₂]²⁻, provides an isoelectronic model for H-doped VO₂, with a vanadium(iii) ion embedded within the cluster core. Notably, structural analysis of [V₆O₆(OSiMe₃)(OMe)₁₂]²⁻ reveals bond perturbations at the siloxide-functionalised vanadium centre that resemble those invoked upon H-atom uptake in VO₂ through ab initio calculations. Our results offer atomically precise insight into the local structural and electronic consequences of the installation of hydrogen-atom-like dopants in VO₂, and challenge current perspectives of the operative mechanism of electron–proton co-doping in these materials.

We report the synthesis and characterisation of a series of siloxide-functionalised polyoxovanadate–alkoxide clusters, [V₆O₆(OSiMe₃)(OMe)₁₂]ⁿ (n = 1⁻, 2⁻), that serve as molecular models for proton and hydrogen-atom uptake in vanadium dioxide.     

Homo- and hetero-nuclear chromium(III) complexes with natural ligands. Part 3. Chromium(III)/vanadium(IV) species isolated from the redox systems

Four new heteronuclear Cr^III/V^IV complexes have been isolated from the redox [Cr^III–V^v–L₁–L₂] systems (L₁ = glycine, glutaminic and nicotinic acids, L₂ = cysteine and glutathione). The complexes have been analysed by spectroscopic methods (diffuse reflectance u.v./vis., i.r.) and by FAB mass spectra. A significant bathochromic shift of the d–d Cr^III and V^IV transitions in heteronuclear complexes (d¹–d³) in comparison to the Cr^III homonuclear species (d³/d³) has been related to the interaction of two metal centres. Spectral analyses by the digital filter and band deconvolution methods are presented.     

Oxygen atom transfer promoted nitrate to nitric oxide transformation: a step-wise reduction of nitrate → nitrite → nitric oxide

Nitrate reductases (NRs) are molybdoenzymes that reduce nitrate (NO₃⁻) to nitrite (NO₂⁻) in both mammals and plants. In mammals, the salival microbes take part in the generation of the NO₂⁻ from NO₃⁻, which further produces nitric oxide (NO) either in acid-induced NO₂⁻ reduction or in the presence of nitrite reductases (NiRs). Here, we report a new approach of VCl₃ (V³⁺ ion source) induced step-wise reduction of NO₃⁻ in a Co^II-nitrato complex, [(12-TMC)Co^II(NO₃⁻)]⁺ (2,{Co^II–NO₃⁻}), to a Co^III–nitrosyl complex, [(12-TMC)Co^III(NO)]²⁺ (4,{CoNO}⁸), bearing an N-tetramethylated cyclam (TMC) ligand. The VCl₃ inspired reduction of NO₃⁻ to NO is believed to occur in two consecutive oxygen atom transfer (OAT) reactions, i.e., OAT-1 = NO₃⁻ → NO₂⁻ (r₁) and OAT-2 = NO₂⁻ → NO (r₂). In these OAT reactions, VCl₃ functions as an O-atom abstracting species, and the reaction of 2 with VCl₃ produces a Co^III-nitrosyl ({CoNO}⁸) with V^V-Oxo ({V^V O}³⁺) species, via a proposed Co^II-nitrito (3, {Co^II–NO₂⁻}) intermediate species. Further, in a separate experiment, we explored the reaction of isolated complex 3 with VCl₃, which showed the generation of 4 with V^V-Oxo, validating our proposed reaction sequences of OAT reactions. We ensured and characterized 3 using VCl₃ as a limiting reagent, as the second-order rate constant of OAT-2 (k₂^/) is found to be ∼1420 times faster than that of the OAT-1 (k₂) reaction. Binding constant (K_b) calculations also support our proposition of NO₃⁻ to NO transformation in two successive OAT reactions, as K_{b(Co^II–NO2⁻)} is higher than K_{b(Co^II–NO3⁻)}, hence the reaction moves in the forward direction (OAT-1). However, K_{b(Co^II–NO2⁻)} is comparable to K_b{CoNO}⁸, and therefore sequenced the second OAT reaction (OAT-2). Mechanistic investigations of these reactions using ¹⁵N-labeled-¹⁵NO₃⁻ and ¹⁵NO₂⁻ revealed that the N-atom in the {CoNO}⁸ is derived from NO₃⁻ ligand. This work highlights the first-ever report of VCl₃ induced step-wise NO₃⁻ reduction (NRs activity) followed by the OAT induced NO₂⁻ reduction and then the generation of Co-nitrosyl species {CoNO}⁸.

Single metal-induced reduction of NO₃⁻ → {NO₂⁻} → NO via oxygen atom transfer reaction.     

Thionolin als analytisches Reagens

Summary According to the measurements performed the redox potential of thionoline changes at the temperature of 40° C in the p_H-range of 0,66 to 8,11 from 0,542 V to 0,087 V (SCE). Thionoline can be used for the selective detection of BrO₃ ^– in the presence of ClO₃ ^–, IO₃ ^– and the free halogens (sensitivity p_D=5,4), as well as for the selective detection of Sn²⁺ in the presence of Cr²⁺, Ti³⁺, V²⁺ and Fe²⁺ (p_D=4,6). Sn²⁺, Ti³⁺ and Cr²⁺ can be titrated potentiometrically with thionoline solution in the presence of Co²⁺, Ni²⁺, Mn²⁺, Al³⁺ and Zn²⁺. V²⁺ and Fe²⁺ interfere with this reaction. Sb³⁺ interferes with the determination of Sn²⁺ and Cr²⁺.Chlorine and bromine water in ethanolic solution convert the thionoline easily and quantitatively in tetrahalogenated products. The halogenation can be watched potentiometrically.     

The Effect of Metal Cations on the Aqueous Behavior of Dopamine. Thermodynamic Investigation of the Binary and Ternary Interactions with Cd2+, Cu2+ and UO22+ in NaCl at Different Ionic Strengths and Temperatures

The interactions of dopamine [2-(3,4-Dihydroxyphenyl)ethylamine, (Dop⁻)] with cadmium(II), copper(II) and uranyl(VI) were studied in NaCl(aq) at different ionic strengths (0 ≤ I/mol dm⁻³ ≤ 1.0) and temperatures (288.15 ≤ T/K ≤ 318.15). From the elaboration of the experimental data, it was found that the speciation models are featured by species of different stoichiometry and stability. In particular for cadmium, the formation of only MLH, ML and ML₂ (M = Cd²⁺; L = dopamine) species was obtained. For uranyl(VI) (UO₂²⁺), the speciation scheme is influenced by the use of UO₂(acetate)₂ salt as a chemical; in this case, the formation of ML₂, MLOH and the ternary MLAc (Ac = acetate) species in a wide pH range was observed. The most complex speciation model was obtained for the interaction of Cu²⁺ with dopamine; in this case we observed the formation of the following species: ML₂, M₂L, M₂L₂, M₂L₂(OH)₂, M₂LOH and ML₂OH. These speciation models were determined at each ionic strength and temperature investigated. As a further contribution to this kind of investigation, the ternary interactions of dopamine with UO₂²⁺/Cd²⁺ and UO₂²⁺/Cu²⁺ were investigated at I = 0.15 mol dm⁻³ and T = 298.15K. These systems have different speciation models, with the MM’L and M₂M’L₂OH [M = UO₂²⁺; M’ = Cd²⁺ or Cu²⁺, L = dopamine] common species; the species of the mixed Cd²⁺ containing system have a higher stability with respect the Cu²⁺ containing one. The dependence on the ionic strength of complex formation constants was modelled by using both an extended Debye–Hückel equation that included the Van’t Hoff term for the calculation of the formation enthalpy change values and the Specific Ion Interaction Theory (SIT). The results highlighted that, in general, the entropy is the driving force of the process. The quantification of the effective sequestering ability of dopamine towards the studied cations was evaluated by using a Boltzmann-type equation and the calculation of pL_0.5 parameter. The sequestering ability was quantified at different ionic strengths, temperatures and pHs, and this resulted, in general, that the pL_0.5 trend was always: UO₂²⁺ > Cu²⁺ > Cd²⁺.     

Coexistence of magnetic and electric orderings in a divalent Cr2+-based multiaxial molecular ferroelectric

Multiferroic materials have attracted great interest because of their underlying new science and promising applications in data storage and mutual control devices. However, they are still very rare and highly imperative to be developed. Here, we report an organic–inorganic hybrid perovskite trimethylchloromethylammonium chromium chloride (TMCM–CrCl₃), showing the coexistence of magnetic and electric orderings. It displays a paraelectric–ferroelectric phase transition at 397 K with an Aizu notation of 6/mFm, and spin-canted antiferromagnetic ordering with a Néel temperature of 4.8 K. The ferroelectricity originates from the orientational ordering of TMCM cations, and the magnetism is from the [CrCl₃]⁻ framework. Remarkably, TMCM–CrCl₃ is the first experimentally confirmed divalent Cr²⁺-based multiferroic material as far as we know. A new category of hybrid multiferroic materials is pointed out in this work, and more Cr²⁺-based multiferroic materials will be expectedly developed in the future.

An organic–inorganic hybrid perovskite Trimethylchloromethylammonium chromium(ii) chloride (TMCM–CrCl₃) can simultaneously show excellent ferroelectricity and antiferromagnetism, which is the first experimentally confirmed Cr²⁺-based multiferroic material.     

Synergistic Catalysis of SnO2/Reduced Graphene Oxide for VO2+/VO2+ and V2+/V3+ Redox Reactions

In spite of their low cost, high activity, and diversity, metal oxide catalysts have not been widely applied in vanadium redox reactions due to their poor conductivity and low surface area. Herein, SnO₂/reduced graphene oxide (SnO₂/rGO) composite was prepared by a sol–gel method followed by high-temperature carbonization. SnO₂/rGO shows better electrochemical catalysis for both redox reactions of VO²⁺/VO₂⁺ and V²⁺/V³⁺ couples as compared to SnO₂ and graphene oxide. This is attributed to the fact that reduced graphene oxide is employed as carbon support featuring excellent conductivity and a large surface area, which offers fast electron transfer and a large reaction place towards vanadium redox reaction. Moreover, SnO₂ has excellent electrochemical activity and wettability, which also boost the electrochemical kinetics of redox reaction. In brief, the electrochemical properties for vanadium redox reactions are boosted in terms of diffusion, charge transfer, and electron transport processes systematically. Next, SnO₂/rGO can increase the energy storage performance of cells, including higher discharge electrolyte utilization and lower electrochemical polarization. At 150 mA cm⁻², the energy efficiency of a modified cell is 69.8%, which is increased by 5.7% compared with a pristine one. This work provides a promising method to develop composite catalysts of carbon materials and metal oxide for vanadium redox reactions.