Simultaneous micro-determination of nicotinamide and its major metabolites, N1-methyl-2-pyridone-5-carboxamide and N1-methyl-4-pyridone-3-carboxamide, by high-performance liquid chromatography

A simultaneous micro-determination of nicotinamide and its major metabolites, N1-methyl-2-pyridone-5-carboxamide (2-py) and N1-methyl-4-pyridone-3-carboxamide (4-py) by high-performance liquid chromatography is described. The method employs a 7-ODS-L (250 mm X 4.6 mm I.D., particle size 7 microns) column eluted with 10 mM potassium dihydrogenphosphate-acetonitrile (96:4, v/v; pH adjusted to 3.0 by the addition of concentrated phosphoric acid) at a flow-rate of 1.0 ml/min. The UV detector was set at 260 nm. The detection limits for nicotinamide, 2-py and 4-py were 10 pmol (1.22 ng), 2 pmol (304 pg) and 2 pmol (304 pg), respectively, at a signal-to-noise ratio 5:1. Isonicotinamide was used as an internal standard. The technique was applied to the analysis of rat and human urines. The total analysis time was ca. 15 min.     

4-羟基-2(1H)-吡啶酮-3-甲酰胺类冬青生菌素类似物的合成与生物活性

以反式-4-羟基肉桂酸为起始原料,经乙酰化、酰基叠氮、curtius重排、加成和环合等6步反应合成了4-羟基-2(1 H)-吡啶酮-3-甲酰胺类冬青生菌素类似物,总收率17%.随后用滤纸片扩散法对该化合物的抑菌性能进行了初步研究.实验表明,该化合物对于白色念珠菌具有较好的抑制作用,对于酵母菌抑制作用较弱,对大肠杆菌和金黄色葡萄球菌基本无抑制作用.     

Compound 30.4, An unusual chlorinated 1,4-benzoxazin-3-one derivative from corn (zea mays).

An unusual chlorinated 1,4-benzoxazin-3-one derivative has been isolated from young corn roots. Its structure was established by spectroscopic techniques (¹H-, ¹³C-NMR, EI and CI-MS, UV and IR) and by correlation with known benzoxazinone derivatives. The assignments of all protons could be made by ¹H shift-correlated 2-D NMR techniques. The chlorinated benzoxazine derivative has been confirmed to be naturally occurring in a second carefully planned growth-chamber experiment.     

Synthesis and biological activity of novel 2-(3-trifluoromethylphenoxy)-4-trifluoromethylthiazole-5-carboxamide derivatives

Novel 2-(3-trifluoromethylphenoxy)-4-trifluoromethylthiazole-5-carboxamides were designed and synthesized utilizing ethyl 3-amino-4,4,4-trifluoro-2-butenoate as a starting material via six steps. Subsequently, their biological activities were evaluated in the greenhouse. Results indicated that several compounds have some insecticidal or fungicidal activity at 600 g ai/ha and 300 g ai/ha, respectively.     

Synthesis of a carborane-substituted bis(phosphanido) cobaltate(i), ligand substitution,and unusual P4 fragmentation

Oxidative addition of the P–P single bond of an ortho-carborane-derived 1,2-diphosphetane (1,2-C₂(PMes)₂B₁₀H₁₀) (Mes = 2,4,6-Me₃C₆H₂) to cobalt(−i) and nickel(0) sources affords the first heteroleptic complexes of a carborane-bridged bis(phosphanido) ligand. The complexes also incorporate labile ligands suitable for further functionalisation. Thus, the cobalt(i) complex [K([18]crown-6)][Co{1,2-(PMes)₂C₂B₁₀H₁₀}(cod)] (cod = 1,5-cyclooctadiene) bearing a labile cyclooctadiene ligand undergoes facile ligand exchange reactions with isonitriles and tert-butyl phosphaalkyne with retention of the bis(phosphanido) ligand. However, in the reaction with one equivalent of P₄, the electron-rich bis(phosphanido) moiety abstracts a single phosphorus atom with formation of a new P₃ chain, while the remaining three P atoms derived from P₄ form an η³-coordinating cyclo-P₃ ligand. In contrast, when the same reaction is performed with two equivalents of the cobalt(i) complex, a dinuclear product is formed which features an unusual P₄ chain in its molecular structure.

Cobalt and nickel complexes of a new carborane-substituted bis(phosphanido) ligand have been prepared. Reaction of the cobalt complex with white phosphorus (P₄) results in a remarkable fragmentation of P₄ into P₃ and P₁ units.     

Synthesis and characterization of chalcogen (S and Se) derivatives of 4-chloro- and 4-methoxy-N,N-diisopropylpyridine-2-carboxamide: X-ray structure of 4-methoxy-3-(sulfanylmethyl)- and 4-chloro-3-(selenenylbenzyl)-N,N-diisopropylpyridine-2-carboxamide

Synthesis of chalcogen (S and Se) derivatives of 4-chloro- and 4-methoxy-N,N-diisopropylpyridine-2-carboxamide (1a and 1b respectively) has been reported. 1a and 1b were lithiated with 2 equiv. of n-BuLi or LDA at ?78 °C. Addition of elemental sulfur or selenium to the carbanion led to the formation of corresponding thiolate or selenolate anions respectively. The selenolate anions were aerial oxidized to afford the corresponding diselenides. The thiolate/selenolate anions were quenched with a variety of electrophiles to give unsymmetrical thio/selenoalkanes in moderate to good yields. Reductive cleavage of Se–Se bond has also been studied. The synthesized compounds were characterized by elemental analysis, NMR (¹H, ¹³C and ⁷⁷Se), FT-IR and mass spectral techniques. Crystal structures of two compounds, 6b and 7a, were determined by single crystal X-ray crystallography. Their crystal structure exhibits 1,4-type S?OCH₃ and Se?Cl intramolecular secondary interactions respectively. The relative thermal stability of 3a, 3b and 4a has also been established by thermogravimetric analysis.     

Solid-phase synthesis of a new diphosphate 5-aminoimidazole-4-carboxamide riboside (AICAR) derivative and studies toward cyclic AICAR diphosphate ribose

The solid-phase synthesis of the first example of a new diphosphate AICAR derivative is reported. The new substance is characterized by the presence of a 5'-phosphate group while a second phosphate moiety is installed on a 5-hydroxypentyl chain attached to the 4-N-position of AICAR. Cyclization of the diphosphate derivative by pyrophosphate bond formation allowed for the formation of a novel AICAR-based cyclic ADP-ribose (cADPR) mimic.     

Biodistribution of tritiated benzoporphyrin derivative (3H-BPD-MA), a new potent photosensitizer, in normal and tumor-bearing mice

The biodistribution of a new and very potent photosensitizer, benzoporphyrin derivative-monoacid, ring A (BPD-MA), was determined in normal and P815 (mastocytoma) or M1 (rhabdomyosarcoma) tumor-bearing DBA/2J mice. A dose of 80 micrograms of 3H-BPD-MA was determined at 3, 24, 48, 72, 96 and 168 h post injection. The following tissues were tested: blood, brain, heart, intestine, kidney, lung, liver, muscle, skin, stomach, spleen, thymus and tumor. The biodistribution of 3H-BPD-MA in normal and tumor-bearing mice was comparable overall. 3H-BPD-MA localized in tumors better than in other tissues except kidney, liver and spleen. The tumor to tissue ratios were in the range 1.5-3 at 24 h post injection and increased further during the next 72 h. The highest levels of 3H-BPD-MA were observed in all tissues at 3 h post injection and decreased rapidly during the first 24 h. After 24 h the clearance from tissues was rather slow. The preliminary clearance data obtained in a group of five normal mice indicated that the majority of the injected dose (60%) cleared from the body via the bile and feces, while only about 4% cleared via kidneys and urine. Studies in which 3H-BPD-MA was extracted from tumor, kidney and liver 3 and 24 h after injection showed that, at 3 h, all the photosensitizing activity in tumor was retained. At 24 h only 39% of the activity was retained and considerably less active material was present in liver and kidney.     

Synthesis of (2R, 3R)-epigallocatechin-3-O-(4-hydroxybenzoate), a novel catechin from Cistus salvifolius, and evaluation of its proteasome inhibitory activities

The total and semi syntheses of (2R,3R)-epigallocatechin-3-O-(4-hydroxybenzoate), a novel catechin from Cistus salvifolius, were accomplished. The proteasome inhibition and cytotoxic activities of the synthetic compound and its acetyl derivative were studied and compared with (2R,3R)-epigallocatechin-3-gallate (EGCG), the active component from green tea.     

Synthesis,Crystal Structure and Biological Activities of 3-Bromo-5-(4-chlorophenyl)-4-cyanopyrrole-N,N-dimethyl-2-carboxamide

The title compound 3-bromo-5-(4-chlorophenyl)-4-cyanopyrrole-N,N-dimethyl-2-amide(3) was synthesized with 4-bromo-2-(4-chlorophenyl)-5-(trifluoromethyl)-1H-pyrrole-3-carbonitrile(1) and N,N-dimethylformamide(2) by the α-C acylation reaction catalyzed by potassium t-butoxide, and characterized by IR, ~1H-NMR and X-ray single-crystal diffraction. It crystallizes in monoclinic, space group P2_(1/n)with a = 12.789(2), b = 13.783(2), c = 17.980(3) ?, β = 109.230(3)°, V = 2992.5 ?~3, Mr = 352.62, D_c = 1.565 mg/m~3, Z = 8, m = 2.924 mm-1, F(000) = 1408, the final R = 0.0424 and w R = 0.0973 for 3518 observed reflections with I 2σ(I). A total of 23559 reflections were collected, of which 6242 were independent(Rint = 0.0566). The insecticidal, herbicidal and antibacterial activities of compound 3 were determined, and the experimental results showed that the mortality of 3 at the concentration of 100 ppm on the Fipronil against Linnaeus was 76.6%, the growth inhibition rate of 3 against Cynodon Dactylon under the condition of 100 ppm was 35.8% and the inhibitory activity of 3 at the concentration of 25 ppm against Fusarium graminearum reached 50.9%. Hence, the title compound has the value of further research and application prospect.     

Design,synthesis and insecticidal activities of novel 1-substituted-5-(trifluoromethyl)-1H-pyrazole-4-carboxamide derivatives

A series of novel 5-(trifluoromethyl)-1H-pyrazole-4-carboxamide derivatives(6a–6n, 7a, 7b, and 8a-8f)were synthesised by placing the amide bond at the 4-position of the pyrazole ring. These derivatives differed from the structure of chlorantraniliprole analogues with the amide bond at the 5-position of the pyrazole ring. Preliminary bioassay results revealed that a few title compounds exhibited good insecticidal activities against lepidopteran pests, such as Plutella xylostella, Mythimna separate, Heliothis armigera, and Ostrinia nubilalis. Some title compounds also elicited broad-spectrum insecticidal activities against dipterous insects including Culex pipiens pallens after altering the amide position. Similar to pyrazole-5-carboxamide analogues, compounds 6b and 6e showed 100% insecticidal activity against P. xylostella, C. pipiens pallens, and M. separate at concentrations of 200, 2, and 200 mg/m L, respectively.This finding suggested that 5-(trifluoromethyl)-1H-pyrazole-4-carboxamide derivatives are potential alternative insecticides for management of agriculture pests.     

Characterization of polymorphs of a novel quinolinone derivative, TA-270 (4-hydroxy-1-methyl-3-octyloxy-7-sinapinoylamino-2(1H)-quinolinone)

The polymorphic forms and amorphous form of TA-270 (4-hydroxy-1-methyl-3-octyloxy-7-sinapinoylamino-2(1H)-quinolinone), a newly developed antiallergenic compound, were characterized by powder X-ray diffractometry, thermal analysis, infrared spectroscopy and solid state 13C-NMR. The intrinsic dissolution rates of polymorphic forms were measured using the rotating disk method at 37 degrees C. The dissolution rates correlated well with the thermodynamic stability of each polymorphic form. These dissolution properties were clearly reflected in the oral bioavailability of TA-270 in rats. The transition behavior for each polymorph and for the amorphous form was studied under the high temperature and humidity conditions. The beta- and delta-forms were transformed into the alpha-form by heating. The amorphous form was also easily crystallized into alpha-form by heating, however it was relatively stable under humidified conditions. The internal molecular packing of each polymorph was estimated from IR and solid state NMR spectral analysis.     

Anisotropic dipole polarizability of transition metal atoms: Sc(2D), Ti(3F,3P), V(4F,4P,6D), Ni(3F) and ions: Sc2+(2D), Ti2+(3F,3P)

Dipole polarizability tensor components and quadrupole moments of transition-metal atoms Sc, Ti, V, Ni, and Cu and ions Sc2+ and Ti2+ are computed using finite field complete active space self-consistent field and multireference configuration interaction ab initio methods. Perpendicular components of the dipole polarizability tensor are calculated from equations involving only parallel components of the polarizability tensor and its average value. Mean polarizability and polarizability anisotropy decrease in the Sc-Ni series. Relativistic effects are accounted for with the Douglas-Kroll Hamiltonian. The consequences of the anisotropic properties of these atoms to their interactions with spherically symmetric rare gases are also discussed.     

Synthesis of C-Nucleoside Analogues： 2-[2-（Hydroxymethyl）-1, 3-dioxolan-5-yl]1, 3-thiazole-4-carboxamide and 2-[2-（Mercaptometh-yl）-1, 3-dioxolan-5-yl] 1, 3-thiazole-4-carboxamide

Novel C-nucleosides of tiazofurin analogue (2-[2-(hydroxymethyl)-1,3-dioxolan-5-yl] 1,3-thiazole-4-carboxamide) and its thiol-substituted derivative (2-[2-(mercaptomethyl)-1,3-dioxolan-5-yl] 1, 3-thiazole-4-carboxamide) were synthesized from methyl acrylate through a multistep procedure. Their structures were confirmed by IR, ^1HNMR, ^13CNMR and elemental analysis.     

Concise Synthesis and X-Ray Crystal Structure of N-Benzyl-2-(pyrimidin-4′-ylamino)-thiazole-4-carboxamide (Thiazovivin), a Small-Molecule Tool for Stem Cell Research

Stem cell research is one of the most promising fields of modern biomedical research and regenerative medicine. Limited availability and ethical concerns suggest the renouncement of embryonic stem cells (ESCs), thus raising the need for more efficient procedures for the generation of stem cells, ideally through reprogramming of mammalian cells. The small molecule N-benzyl-2-(pyrimidin-4′-ylamino)-thiazole-4-carboxamide (thiazovivin) is known to improve the generation of human induced pluripotent stem cells (iPSCs) from human fibroblasts. We herein describe a highly efficient procedure for the synthesis of thiazovivin over just five steps, which should be suitable for a large-scale application, and the first x-ray crystal structure of the target compound.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource: Full experimental and spectral details.]     

Manganese Triacetate Oxidation of 3β, 3aβ, 6-Trimethyl-3a, 7aβ-dihydro-2(3H), 5(4H)-benzofurandione

The manganese triacetate oxidation of hindered α¹-positions in a model enone, 3β, 3aβ, 6-trimethyl-3a, 7aβ-dihydro-2(3H), 5(4H)-benzofurandione, provided a procedure for the introduction of the α′-hydroxyenone functionality characteristic of the A ring of certain quassinoids.     

Apparent molar heat capacities and apparent molar volumes of Pr(ClO4)3(aq), Gd(ClO4)3(aq), Ho(ClO4)3(aq), and Tm(ClO4)3(aq) at T=(288.15, 298.15, 313.15, and 328.15) K and p=0.1 MPa

Acidified aqueous solutions of Pr(ClO₄)₃(aq), Gd(ClO₄)₃(aq), Ho(ClO₄)₃(aq), and Tm(ClO₄)₃(aq) were prepared from the corresponding oxides by dissolution in dilute perchloric acid. Once characterized with respect to trivalent metal cation and acid content, the relative densities of the solutions were measured at T=(288.15, 298.15, 313.15, and 328.15) K and p=0.1 MPa using a Sodev O2D vibrating tube densimeter. The relative massic heat capacities of the aqueous systems were also determined, under the same temperature and pressure conditions, using a Picker Flow Microcalorimeter. All measurements were made on solutions containing rare earth salt in the concentration range 0.01 ⩽ m/(mol · kg⁻¹) ⩽ 0.2. Relative densities and relative massic heat capacities were used to calculate the apparent molar volumes and apparent molar heat capacities of the acidified salt solutions from which the apparent molar properties of the aqueous salt solutions were extracted by the application of Young's Rule. The concentration dependences of the isothermal apparent molar volumes and heat capacities of each aqueous salt solution were modelled using Pitzer ion-interaction equations. These models produced estimates of apparent molar volumes and apparent molar heat capacities at infinite dilution for each set of isothermal V_φ,2 and C_pφ,2 values. In addition, the temperature and concentration dependences of the apparent molar volumes and apparent molar heat capacities of the aqueous rare earth perchlorate salt solutions were modelled using modified Pitzer ion-interaction equations. The latter equations utilized the Helgeson, Kirkham, and Flowers equations of state to model the temperature dependences (at p=0.1 MPa) of apparent molar volumes and apparent molar heat capacities at infinite dilution. The results of the latter models were compared to those previously published in the literature.Apparent molar volumes and apparent heat capacities at infinite dilution for the trivalent metal cations Pr³⁺(aq), Gd³⁺(aq), Ho³⁺(aq), and Tm³⁺(aq) were calculated using the conventions V₂^∘(H⁺(aq)) ≡ 0 and C_p2^∘(H⁺(aq)) ≡ 0 and have been compared to other values reported in the literature.