Preparation and electrorheological characteristic of CdS/Polystyrene composite particles

Cadmium sulfide/polystyrene (CdS/PS) hybrid particles were synthesized and their physical characteristics including electrorheology were examined. Monodisperse CdS/PS nanocomposite particles with diameters of 2 μm were obtained via dispersion polymerization. To form cadmium sulfide nanoparticles onto the PS surface, 2-(dimethylamino)ethyl methacrylate was used as a functional monomer for coordinating with Cd²⁺ ions. Finally, cadmium sulfide nanoparticles with size < 10 nm were formed with the release of S²⁻ ions from thioacetamide. The morphology of the as-prepared CdS/PS nanocomposite particles clearly showed that the CdS particles are present on the surface of the PS. The optical properties were also studied. In addition, their electrorheological characteristics were confirmed by using optical microscopy with applied electrical field. Recently, dielectric properties of CdS nanoparticles were already reported; however, electrorheological characteristics of CdS/PS nanocomposite particles were investigated for the first time.     

Chemically binding Eu^3＋ onto CdS semiconductor nanoparticle surface

Europium ions were chemically bound to CdS nanoparticles surface by diethylenetri-aminepentaacetate (DTPA, 1) in a two-step synthetic route. First 1 was applied to chelate with cadmium on the surface of cadmium-rich CdS nanoparticles and act as a capping agent. Further, the purified 1-capped particles were used to bind with Eu~3 . The purified and redispersed particles were characterized by photoluminescence spectroscopy, TEM and SEM. It was observed that Eu~3 on the nanoparticle surface significantly increased the band gap emission and decreased the surface emission intensity of the CdS nanoparticles.     

Cadmium sulphide quantum dots in morphologically tunable triblock copolymer aggregates

Cadmium sulfide (CdS) quantum dots (QDs) are formed within poly(ethylene oxide)-block-polystyrene-block-poly (acrylic acid) (PEO-b-PS-b-PAA) triblock copolymer aggregates of different architectures. These structures are obtained starting with the same ionically cross-linked primary micelles consisting of a cadmium acrylate core, a PS shell, and a PEO corona. One morphology is a worm-shaped micelle prepared in tetrahydrofuran (THF) in which the CdS QDs are surrounded by the PAA and aligned as a loose necklace in the PS matrix. The PEO serves as a corona around the PS rod. Another structure is a multicore spherical (ca. 50 nm) water soluble PS micelle, surrounded by PEO chains. The CdS particles within these two latter structures are formed by the reaction of cadmium ions present in the acrylate cores with hydrogen sulfide. In a third structure, the CdS QDs are located on the surface of PS micelles. A fourth spherical single-core micelle structure is postulated to exist in dilute THF solutions. The dimensions in all the aggregates can be controlled by the block length.     

Semiconductor nanoparticle/polystyrene latex composite materials

Cadmium sulfide and cadmium selenide/cadmium sulfide core/shell nanoparticles stabilized with poly(cysteine acrylamide) have been bound to polystyrene (PS) latexes by three methods. First, anionic 5 nm diameter CdS particles were electrostatically attached to 130 nm surfactant-free cationic PS latexes to form stable dispersions when the amount of CdS particles was less than 10% of the amount required to form a monolayer on the surface of the PS particles or when the amount of CdS particles exceeded the amount required to form a monolayer on the PS particles. Transmission electron microscopy (TEM) showed nanoparticles on the surface of the latex particles. Fluorescence spectra showed unchanged emission from the nanoparticles. Second, anionic, surfactant-free PS latexes were synthesized in the presence of CdS and CdSe/CdS nanoparticles. TEM showed monodisperse latex particles with trapped nanoparticles. Third, surfactant-stabilized latexes were synthesized by copolymerization of styrene with vinylbenzyl(trimethyl)ammonium chloride electrostatically bound to the CdSe/CdS nanoparticle surface. Brownian motion of the submicroscopic composite particles in water was detected by fluorescence microscopy.     

Optical and electrical properties of inverted emulsions based on sodium bis(2-ethylhexyl) sulfosuccinate containing cadmium sulfide particles

The optical and electrical properties of inverted emulsions based on sodium bis(2-ethylhexyl) sulfosuccinate (AOT) containing nanoparticles of cadmium sulfide are studied. The particle size of the synthesized samples is determined from UV spectroscopy data. The state of solubilized water in invert emulsions is found to change in the presence of cadmium sulfide due to the formation of aqua complexes. The shape of AOT micelles and the structures formed by drying the invert AOT emulsions are shown to be affected by the degree of hydration and the solubilization of CdS particles.     

Sucrose radical-production cross-section regarding heavy-ion irradiation

We investigated the sucrose radical-production cross-section induced by heavy-ion irradiation. L-alanine was also used in order to compare radical yield and cross-section. The stable free radicals after irradiation were analyzed by electron paramagnetic resonance (EPR). The radical yield obtained by the irradiated samples had a logarithmic correlation with the LET (linear energy transfer). Quantitative EPR analyses showed that radical productions for sucrose and L-alanine vary both by different particle irradiation and the LET under the same absorbed dose. Furthermore, the cross-sections of radical productions for samples were calculated. Both cross-sections for C ions irradiation under LET 30 keV/microm at 50 Gy dose were approximately 3.0x10(-9) microm(2), taking account of the molecular areas of the samples. The values of the cross-sections imply that multiple ionizing particles involve producing stable radicals.     

EPR study of iron-doped MFI zeolite and silicalite catalysts: effect of treatments after synthesis

The systematic study of iron-doped MFI zeolite and MFI silicalite by X- and Q-band EPR spectroscopy is reported in this paper. Both samples, which contain Fe(III) ions in the MFI lattice, underwent three sequential treatments—calcination, steaming, and washing with sodium dithionite solution—which are needed to make the catalyst active by extracting iron ions from the lattice. EPR spectra could be simulated by assuming a broad distribution of spin-spin (zero-field) coupling parameters. The simulation parameters depend on sample history and reproduce the selective intensity changes that are observed in X-band spectra after each treatment. In particular, the distribution width decreases by calcining and steaming samples and then it increases by treating with aqueous dithionite solution. This is in agreement with the view that iron ions are extracted from the framework by calcining and by steaming and may form relatively large iron oxide particles which become smaller after the chemical treatment. We have also studied the temperature dependence of the EPR spectra. The most interesting results are from the steamed samples. Their behavior has been interpreted as due to the presence of superparamagnetic single domain particles of iron oxide. This agrees with the view that iron oxide particles form during steaming.     

Improving the contact properties of CdS-decorated TiO<Subscript>2</Subscript> nanotube arrays using an electrochemical/thermal/chemical approach

Decoration of TiO₂ nanotube films (TiO₂ nanotube arrays (TNAs)) with CdS nanoparticles has been pursued for a broad range of applications that goes from solar cells to biological sensors. In most synthesis methods, the scale-up of devices has been challenging due to the poor contact at the chalcogenide/oxide interface. In this work, we validate the electrochemical/thermal/chemical route as a superior strategy to sensitize TNAs with CdS nanoparticles when compared with conventional methods. The process consisted of (i) electrodeposition of cadmium on TNAs to ensure strong bonding between TiO₂ and Cd precursor particles, (ii) air annealing of Cd-decorated TNAs to thermally oxidize cadmium to cadmium oxide, and (iii) total sulfurization of cadmium oxide to obtain CdS in an hexagonal phase matching that of TNAs. X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) analyses indicated the complete transformation of cadmium precursor particles into CdS and a good surface coverage of the internal/external walls of TNAs. When compared to samples prepared by successive ionic layer adsorption and reaction (SILAR), electrochemical impedance spectroscopy data revealed the improvement of the electrical properties of the TNA matrix due to the sulfurization process and a lower contact resistance at the CdS/TNA interface. These improvements explain the superior photoelectrochemical response of CdS/TNA photoelectrodes obtained by the electrochemical/thermal/chemical route.     

Optical properties of core/shell typed PMMA/CdS nanoparticles prepared by in situ and ex situ surfactant-free emulsion polymerization

Core/shell poly(methyl methacrylate)/cadmium sulfide (PMMA/CdS) nanoparticles were prepared by surfactant-free emulsion copolymerization with 2-(dimethylamino)ethyl methacrylate (DMAEMA) auxiliary monomer. According to the addition time of Cd²⁺ ions, the synthesis of the hybrid nanoparticles was conducted in in situ and ex situ techniques. The core/shell PMMA/CdS nanoparticles synthesized by the post-addition (ex situ) of Cd²⁺ ions showed a wide size distribution and interference fringes in the photoluminescence (PL) spectrum. However, these results were improved when the PMMA/CdS nanoparticles were synthesized in the presence of Cd²⁺ ions (in situ method). The in situ method made it possible to obtain monodisperse hybrid nanoparticles and fairly narrow band-gap emission.     

BACTERIAL PHOTOPROTECTION THROUGH EXTRACELLULAR CADMIUM SULFIDE CRYSTALLITES

Ultraviolet light and the heavy metal, cadmium, both have toxic effects on many microorganisms. In this communication we describe a method by which the bacterium Klebsiella aerogenes surmounts both problems using one biological process: the synthesis of cadmium sulfide (CdS) crystallites. These semiconductor particles absorb radiation in the UV spectral region and therefore, when K. aerogenes produces extracellular CdS material in response to environments containing cadmium ions, a photoprotective layer is formed. The effect of UVA radiation on cultures of Klebsiella aerogenes was monitored using electron microscopy, energy-dispersive X-ray analysis and electronic spectroscopy. The results show that at wavelengths 320 nm Λ 400 nm, a photoprotection period of between 4 and 6 h is induced, which eventually fails due to photodegradation of the semiconductor layer to metallic cadmium and elemental sulfur.     

On the interactions of free radicals with gold nanoparticles

Electron paramagnetic resonance (EPR) spectroscopy was used to study the interactions between stable free radicals and gold nanoparticles. The nitroxyl free radicals used were TEMPO, TEMPAMINE, and TEMPONE. Two sizes of Au particles, 15 and 2.5 nm in diameter, were synthesized to investigate the interactions with the metallic particles. We find that the EPR signal is reduced upon adsorption of the radicals onto the 15 nm Au particle surface. Despite the strong adsorption of TEMPAMINE on the particles, the signal intensity recovers upon the introduction of a high concentration of ethanolamine to the solution. The signal reduction was proportional to the concentration of Au particles, and the signal totally disappeared at high concentrations of Au particles. Possible explanations of the signal reduction are discussed in this Article. We propose that the reduction in signal intensity arises from exchange interactions between the unpaired electrons of the adsorbed radicals and conduction-band electrons of the metallic particles. In addition, in the presence of oxygen, the adsorbed TEMPAMINE radicals are catalytically oxidized to the carbonyl derivative, TEMPONE. A mechanism for this unexpected catalytic reaction is proposed.     

Energy Transfer Between Eu3+ Ions and CdS Quantum Dots in Sol-Gel Derived CdS/SiO2 : Eu3+ Gel

We have investigated the energetic correlation between rare-earth ions and semiconductor nanocrystals, using europium ion (Eu³⁺) doped silica (SiO₂) gel with adsorbed cadmium sulfide (CdS) particles. Samples were prepared by a sol-gel technique, in which several methods for the precipitation of CdS colloids were attempted. The fluorescence intensities were compared for different gels, with and without CdS particles. The intrinsic emission lines due to ⁵D₀ ⁷F_J(J = 0–4) transitions of Eu³⁺ were observed, which were enhanced for 24 h-immersed gel (dried at 50°C). From the results on the decay dynamics of fluorescence, we proposed the model that surface-trapped electrons on CdS particles nonradiatively excited 4f electrons in Eu³⁺ ions due to an energy transfer process.     

The synthesis of nucleus-shell Cd(OH)<Subscript>2</Subscript>/CdS structures by chemical precipitation from aqueous solutions

The region of stable coexistence of Cd(OH)₂ and CdS as a function of pH and the concentration of the complex-forming agent (ammonia) was determined by thermodynamic analysis with the purpose of the preparation of Cd(OH)₂ cadmium hydroxide particles surrounded by cadmium sulfide CdS shells. In this region, powders were obtained by chemical precipitation during various precipitation times from aqueous solutions. X-ray diffraction was used to track the growth of the CdS nanophase of a disordered structure and hexagonal Cd(OH)₂ phase consumption with time. It was found by complexonometry that part of cadmium formed insoluble structures as a result of the formation of continuous nanosized CdS shells on single crystalline Cd(OH)₂ particles. A comparative analysis of the experimental data was used to determine the kinetics of formation of nucleus-shell Cd(OH)₂/CdS particles in the system.     

Nanometer particles synthesis in reverse micelles: Influence of the size and the surface on the reactivity

In this paprr we are presenting the synthesss “in situ” of nanoparticles in reverse micelles. In the case of aggregates containing copper ions, it is possible to form metallic particles surrounded or not by an oxide layer. By mixing aggregates containing cadmium and sulphide ions, CdS particles are formed. The size and polydispersity of the particles are controlled. The photoelectron transfer reaction depends mainly on the surface composition. In the range of 1 to 5 nm, the efficiency in the electron transfer does not depend on the size of the particle. The reverse micelles are formed by using either sodium di(2-ethyl hexyl)sulfosuccinate, usually called {AOT} or mixed bivalent and sodium di(2-ethyl hexyl)sulfosuccinate {AOl/M(AOT)₂}.     

Cadmium sulfide nanocluster-based electrochemical stripping detection of DNA hybridization

A novel, sensitive electrochemical DNA hybridization detection assay, using cadmium sulfide (CdS) nanoclusters as the oligonucleotide labeling tag, is described. The assay relies on the hybridization of the target DNA with the CdS nanocluster oligonucleotide DNA probe, followed by the dissolution of the CdS nanoclusters anchored on the hybrids and the indirect determination of the dissolved cadmium ions by sensitive anodic stripping voltammetry (ASV) at a mercury-coated glassy carbon electrode (GCE). The results showed that only a complementary sequence could form a double-stranded dsDNA-CdS with the DNA probe and give an obvious electrochemical response. A three-base mismatch sequence and non-complementary sequence had negligible response. The combination of the large number of cadmium ions released from each dsDNA hybrid with the remarkable sensitivity of the electrochemical stripping analysis for cadmium at mercury-film GCE allows detection at levels as low as 0.2 pmol L(-1) of the complementary sequence of DNA.     

壳聚糖-CdS复合膜制备及其对吡啶的传感特性

利用壳聚糖（CS）易于成膜的特点，模拟生物矿化，在有机物调制下通过异相成核生长制备了CS/CdS纳米颗粒复合膜.研究了成膜条件对膜的水热稳定性和发光性能的影响，以及CS/CdS纳米颗粒复合膜对水体中吡啶的响应特性.扫描电镜分析表明CS/CdS纳米颗粒复合膜均匀性好， CdS以物理掺杂方式均匀分布于CS薄膜中， CdS颗粒尺寸在70 nm左右.但薄膜荧光光谱位置和形状表明实际发光的CdS簇集体直径小于20 nm.由此推测电镜观察到的CdS颗粒可能是由许多CdS小颗粒聚集而成，小颗粒之间因有机物的存在而相互隔离. CS/CdS纳米颗粒复合膜的荧光发射对水体中吡啶的存在十分敏感，微量吡啶的存在会引起薄膜荧光发射急剧增强.除铜和碘离子外，水体系中其他常见离子对薄膜荧光发射没有显著影响，预期CS/CdS纳米颗粒复合薄膜有可能发展成为一种重要的水体系吡啶测定专用传感薄膜材料.     

Stabilization of the thermodynamically favored polymorph of cadmium chalcogenide nanoparticles CdX (X = S, Se, Te) in the polar mesopores of SBA-15 silica

A versatile synthetic approach to cadmium chalcogenide nanoparticles in the mesopores of SBA-15 silica as a host matrix was developed. The use of cadmium organochalcogenolates of the type Cd(XPh)(2).TMEDA (X = S, Se, Te) allowed the preparation of nanoparticles of all three cadmium chalcogenides following the same experimental protocol. Particles of CdS, CdSe, and CdTe with a particle size of 7 nm were prepared from this class of single-source precursors. The incorporation of the precursor molecules into the pores was achieved by melt infiltration at a temperature of 140 degrees C. Subsequent pyrolysis of the precursors in the mesopores yielded the semiconductor particles. Owing to the high polarity of the silanol-covered pore walls, which lower the surface energy of the particles to a large extent, the dimorphic cadmium chalcogenides are obtained in their thermodynamically favored modifications; e.g., CdS particles crystallize in the wurtzite type, CdTe particles are obtained in the zinc blende structure, and CdSe (where no unambiguous preference exists) crystallizes as a "mixture" of both structures with a rather random stacking sequence.     

Surface-tunable photoluminescence from block copolymer-stabilized cadmium sulfide quantum dots

The static and time-resolved photoluminescence properties of polystyrene-b-poly(acrylic acid) (PS-b-PAA)-stabilized cadmium sulfide quantum dots (CdS QDs) have been characterized for the first time, demonstrating tunable emission spectra and quantum yields via different chemical treatments of the PAA layer. Samples with the PAA layer in its cadmium carboxylate form showed more-intense band-edge emission and relatively high quantum yields compared with samples in which the PAA layer was in its acid form. This activation effect is explained in terms of passivation of trap sites on the QD surface by specific interactions between the QD and the cadmium-neutralized PAA layer. Lifetimes of band-edge and trap state emission for the various samples ranged from 40 to 61 ns and 244 to 360 ns, respectively. Impressive long-term stability was also shown for a sample of cadmium-neutralized PS-b-PAA-stabilized QDs dispersed in toluene, which maintained 90% of its photoluminescence over 57 days aging under ambient conditions. It is also shown that Cd2+ activation of photoluminescence does not occur when Mg2+ ions are added to similar QD solutions, indicating potential of these block copolymer-stabilized QDs as Cd2+-selective sensors. Irrespective of chemical treatment of the PAA layer, the external PS brush layer effectively stabilized all samples in various organic solvents, resulting in clear CdS colloids with no observed precipitation over several months. Dynamic light scattering and gel permeation chromatography revealed differences in the aggregation numbers and hydrodynamic radii of colloidal QDs for different treatments of the PAA layer, attributed to the lower solubility of the poly(cadmium acrylate) blocks compared to the PAA blocks in the acid form. Finally, it was demonstrated that the PS-b-PAA-stabilized QDs could be well dispersed in PS homopolymer, producing optically transparent photoluminescent films which retained the emission features of the colloidal QDs. Stable and surface-tunable optical properties via the PAA layer and polymer solubility and processability via the PS layer make these PS-b-PAA-stabilized CdS QDs exciting "building blocks" for the bottom-up assembly of functional hierarchical materials for photonics, sensors, and bio-labeling applications.     

Detection of shallow electron traps in quantum-sized CdS particles using dithiolenes

Photophysical characteristics of capped and uncapped CdS particles have been investigated in aqueous solution. It is seen that the fluorescence spectrum shifts towards lower energies in the presence of toluene dithiol (TDT) and dimercaptophthalic acid (DMPA). This shift, which is due to quenching of shallow traps, is more predominant with TDT. Also, the presence of excess Cd²⁺ ions at the surface of the CdS particles facilitates the binding of dithiolenes.     

利用牛血清蛋白合成CdS纳米棒和网状纳米线

采用简单易控、对环境友好的矿化方法, 利用牛血清蛋白(BSA)做模板, 通过Cd2+与硫代乙酰胺(TAA)反应制备了形貌均一的CdS纳米棒和网状纳米线. 分别采用透射电子显微镜(TEM)、X射线能谱(EDS)、X射线衍射(XRD)、荧光(PL)发射谱和导电原子力显微镜(C-AFM)等方法对不同实验温度下制备的CdS样品的结构形貌、成分组成和光学性质及微区电子传输行为进行了表征. 结果表明: 在实验反应温度为20 ℃时, 得到的产物为单分散性好的CdS 纳米棒, 长度为250 nm, 直径为30 nm; 在50 ℃时, 得到网状CdS纳米线, 其长度为2-3 μm; CdS纳米棒和网状纳米线均为立方相闪锌矿结构. 荧光性质的测试表明, CdS纳米棒和网状纳米线具有优良的荧光性能, 电流-电压(I-V)特性的表征表明CdS纳米线具有很好的电导特性.