Investigation of metal attachment to polystyrenes in matrix-assisted laser desorption ionization

Cationization is essential to the matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectrometric analysis of a variety of synthetic polymers. This work studied polystyrene cationization in MALDI using the salts of eight different metals. It was found that only the salts of silver, copper, and palladium produced good metal—polystyrene cation signals. More interestingly, it was observed that MALDI could also produce metal-rich cluster cations and that the presence of polystyrenes tended to suppress formation of the metal-rich cluster cations. Based on these results and others, we propose that polystyrene cationization may proceed through gas-phase metal attachment reactions under the conditions used. With this argument, we were able to better explain a reported experimental observation that showed a strong cation concentration effect on measured molecular weight distributions of polystyrenes.     

Solvent selection for matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometric analysis of synthetic polymers employing solubility parameters

The principle relating to the selection of a proper matrix, cationization reagent, and solvent for matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS) of synthetic polymers is still a topic of research. In this work we focused on the selection of a suitable MALDI solvent. Polystyrene PS7600 and poly(ethylene glycol) PEG4820 were analyzed by MALDI‐TOF MS using various solvents which were selected based on the Hansen solubility parameter system. For polystyrene (PS), dithranol was used as the matrix and silver trifluoroacetate as the cationization reagent whereas, for poly(ethylene glycol) (PEG), the combination of 2,5‐dihydroxybenzoic acid and sodium trifluoroacetate was used for all experiments. When employing solvents which dissolve PS and PEG, reliable MALDI mass spectra were obtained while samples in non‐solvents (solvents which are not able to dissolve the polymer) failed to provide spectra. It seems that the solubility of the matrix and the cationization reagent are less important than the polymer solubility. Copyright © 2010 John Wiley & Sons, Ltd.     

Solid state nuclear magnetic resonance as a tool to explore solvent-free MALDI samples

Solid-state Nuclear magnetic resonance (NMR) was used here to explore structural characteristics of samples to be subjected to matrix-assisted laser desorption/ionization (MALDI) and prepared without the use of any solvent. The analytical systems scrutinized in NMR were mixtures of a 2,5-dihydroxybenzoic acid (2,5-DHB) matrix and caesium fluoride (CsF), used as the cationization agent in synthetic polymer MALDI mass analysis, at different molar ratios (1:1, 5:1, and 10:1). Complementary information could be obtained from ¹³C, ¹³³Cs, and ¹⁹F NMR spectra. Grinding the matrix together with the salt in the solid state was shown to induce a strong modification in the molecular organization within the MALDI sample. The evidenced mechano-induced reactions allow strong interactions between the matrix and the cation, up to the formation of a salt, and only occur in the presence of some water molecules. Addition of a poly(ethylene oxide) polymer as the analyte did not further modify the observed molecular organizations. Although relative matrix and salt concentrations in the scrutinized samples were unusual for MALDI analysis, mass spectra of good quality could be obtained and revealed that cation attachment on polymers during the MALDI process is not a matrix-independent event since a lower ionization efficiency was obtained from highly organized solid samples, mostly consisting of 2,5-DHB caesium salt species.     

Analysis of hydrocarbon polymers by matrix-assisted laser desorption / ionization-fourier transform mass spectrometry

A quick and effective sample preparation is demonstrated for matrix-assisted laser desorption/ionization (MALDI) analysis of nonpolar polymers. Polyisoprene, polystyrene, and polybutadiene polymers were investigated by using as matrix a 2,5-dihydroxybenzoic acid and silver nitrate combination. Silver cationized oligomers produce useful spectra that can be signal averaged to characterize polymer distributions extending up to 6000 u by using a 3-T Fourier transform mass spectrometer. Because an electrostatic ion deceleration protocol was used to extend the mass range, trapping discrimination is shown to exist for molecular weight distributions broader than about 2500 u. However, an integral procedure can be used to reconstruct the true polymer profiles through co-addition of signal transients obtained by using various gated deceleration times. For polymers with narrower mass distributions, silver cationization along with signal averaging provides rapid and accurate polymer characterization for nonpolar polymer systems by using standard MALDI Fourier transform mass spectrometry instrumentation.     

Sodium-tolerant matrix for matrix-assisted laser desorption/ionization mass spectrometry and post-source decay of oligonucleotides

A mixture of 2',4',6'-trihydroxyacetophenone in acetonitrile and aqueous triammonium citrate solution in a 1:1 molar proportion (0.2 M concentration) was found to be a good matrix for the detection of synthetic oligodeoxynucleotide samples. A high proportion of volatile solvent as well as the high salt content ensure fast co-crystallization of the matrix, co-matrix and analyte molecules. Matrix-assisted laser desorption/ionization (MALDI) mass spectra obtained in negative ion reflectron mode from samples prepared with this protocol show deprotonated molecules [M - H](-), rather than sodium adducts, as the most abundant ions even when up to 50 mM of sodium chloride is present in the sample. The matrix is shown to be effective for low mass modified single nucleotides as well as for longer oligodeoxynucleotides (up to 18mer). Post-source decay (PSD) mass spectra can also be obtained by increasing the laser fluence. Simple sequence information such as the identity and localization of a deleted base or the 5'/3' orientation can then easily be obtained. The calibration method and mass accuracy required are discussed depending on the type of information required.     

The cationization of synthetic polymers in matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry: Investigations of the salt‐to‐analyte ratio

Matrix‐assisted laser desorption/ionization (MALDI) is a soft ionization technique that when used to analyze synthetic polymer analytes often requires the addition of a metal cationization agent (herein termed the “salt”). The choice of both the matrix and the cationization agent needs to be taken into account when considering the polymer under study; different polymers have shown different affinities toward different cationization agents, and their selectivity can change as the matrix changes. Salt‐to‐analyte ratio (S/A) plots are used in this work to investigate the effect of the quantity of cationization agent employed in the analysis of a poly (methylmethacrylate) (PMMA) analyte with different MALDI matrices. The point at which analyte signal stops increasing with the added cationization agent is termed the “cation saturation point,” and it was found to occur around a S/A of 1. When the analyte signal after this point remains constant, it is termed an “ideal case.” The “non‐ideal case” occurs when the analyte signal decreases after the cation saturation point. The amount of matrix present (measured as the matrix‐to‐analyte molar ratio, M/A) and the use of different counterions for the salt are also found to affect the intensity of the analyte signal. In non‐ideal cases, changes in the counterion or an increase in the M/A are found to increase the analyte signal, often converting an initially observed non‐ideal case into an ideal case. Several experiments attempting to uncover the reason for observation of the non‐ideal S/A behavior are also described.     

Investigating the effect of mixing ratio on molar mass distributions of synthetic polymers determined by MALDI-TOF mass spectrometry using design of experiments

It is well known that the mixing ratio affects the molar mass distribution of synthetic polymers determined by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). Surely, the molar mixing ratio determines whether a mass spectrum will be obtained or not. However, depending on the mass range, several effects such as multimer formation occur, which might be a source of errors in molar mass distribution calculations. In this study, the effect of mixing ratio was investigated for several synthetic polymers, including polystyrene (PS), poly(dimethylsiloxane) (PDMS), poly(ethylene glycol) (PEG), and poly (methyl methacrylate) (PMMA) using statistical designs of experiments. The 2³ full factorial design was found to be suitable in the study of more than 1000 samples. The obtained MALDI mass spectra as well as the ANOVA statistics show that the mixing ratio affects the molar mass distribution. The optimal mixing ratio for a defined synthetic polymer depends on the studied combination (matrix, cationization reagent, solvent).     

The analysis of industrial synthetic polymers by electrospray droplet impact/secondary ion mass spectrometry

Electrospray droplet impact (EDI)/secondary ion mass spectrometry (SIMS) is a new desorption/ionization technique for mass spectrometry in which highly charged water clusters produced from the atmospheric‐pressure electrospray are accelerated in vacuum by several kV and impact the sample deposited on the metal substrate. In this study, several industrial synthetic polymers, e.g. polystyrene (PS) and polyethylene glycol (PEG) were analyzed by EDI/SIMS mass spectrometry. For higher molecular weight analytes, e.g. PS4000 and PEG4600, EDI/SIMS mass spectra could be obtained when cationization salts are added. For the polymers of lower molecular weights, e.g. PEG300 and PEG600, they could be readily detected as protonated ions without the addition of cationization agents. Anionized PS was also observed in the negative ion mode of operation when acetic acid was added to the charged droplet. Compared to matrix‐assisted laser desorption/ionization (MALDI), ion signal distribution with lower background signals could be obtained particularly for the low‐molecular weight polymers. Copyright © 2009 John Wiley & Sons, Ltd.     

Matrix-assisted laser desorption ionization time-of-flight mass spectrometry for the analysis of polydienes

An analytical method based on matrix-assisted laser desorption ionization (MALDI) time-of-flight mass spectrometry has been developed to provide information on oligomer structure, average molecular weight, and molecular weight distributions of polydienes (e.g., polybutadiene and polyisoprene), an important class of industrial polymers. This MALDI method involves the use of all-trans-retinoic acid as the matrix, copper (II) nitrate as the cationization reagent, and tetrahydrofuran as the solvent. The incorporation of this copper salt generates Cu⁺ adducts with the polymer chains. It also improves the signal strength and extends the upper mass range when used with all-trans-retinoic acid, as compared to silver nitrate. With this formulation, it is demonstrated that polybutadienes of narrow polydispersity with masses up to 300,000 u and polyisoprenes of narrow polydispersity with masses up to 150,000 u can be analyzed. The upper molecular weight limit is set by the requirement of using higher matrix-to-polymer ratios with increasing polymer molecular weight, to the point where the instrument can no longer detect the small quantity of polymer present in the matrix host. It is also shown that this sample preparation generates previously unreported adduction behavior. The practical implications of this adduction behavior on polymer structural analysis, accuracy of molecular weight determination, and the upper molecular weight limit of oligomer resolution are discussed. It is illustrated that, in a linear time-lag focusing MALDI instrument, oligomer resolution can be obtained for polydienes with molecular weights up to 24,000, providing structural confirmation of the end-groups and the repeat unit. The average molecular weights of a number of polydienes of narrow polydispersity determined by MALDI are compared to those obtained by gel permeation chromatography, and discrepancies are noted.     

芳香环状聚膦酸酯齐聚物的基质辅助激光解吸电离飞行时间质谱分析

用基质辅助激光解吸电离飞行时间质谱方法对一系列芳香环状聚膦酸酯低聚物进行了结构分析。比较了不同基质及阳离子剂对芳香环状聚膦酸酯分析结果的影响。1,8,9-蒽三酚基质仅对含有羰基基团聚膦酸酯环状齐聚物分析有效,而视黄酸基质则对所有聚膦酸酯环状剂聚物有效,是这类新型芳香环状齐聚物的适宜基质。环状聚膦酸酯齐聚物的阳离子齐分析表明,氯化锂是这种环状齐聚物的适宜的阳离子添加剂。     

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for polymer analysis: solvent effect in sample preparation

The success of matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectrometry for the characterization of polymer structures and for the determination of average molecular weights and distributions depends on the use of a proper sample/matrix preparation protocol. This work examines the effect of solvents, particularly solvent mixtures, used to prepare polymer, matrix, and cationization reagent solutions, on MALDI analysis. It is shown that the use of solvent mixtures consisting of polymer solvents does not have a significant effect on the molecular weight determination of polystyrene 7000 and poly(methyl methacrylate) 3750. However, solvent mixtures containing a polymer nonsolvent can affect the signal reproducibility and cause errors in average weight measurement. This solvent effect was further investigated by using confocal laser fluorescence microscopy in conjunction with the use of a fluorescein-labeled polystyrene. It is demonstrated that sample morphology and polymer distribution on the probe can be greatly influenced by the type of solvents used. For sample preparation in MALDI analysis of polymers, it is important to select a solvent system that will allow matrix crystallization to take place prior to polymer precipitation. The use of an excess amount of any polymer nonsolvent should be avoided.     

Thin-layer chromatography-matrix-assisted laser desorption ionisation-time-of-flight mass spectrometry using particle suspension matrices

Particle suspension matrices have been successfully utilized for the analysis of tetracycline antibiotics by thin-layer chromatography-matrix-assisted laser desorption ionisation-time-of-flight mass spectrometry (TLC-MALDI-TOF-MS). Particles of different materials and sizes have been investigated (Co-UFP, TiN, TiO2, Graphite and Silicon) by applying particle suspensions to eluted TLC plates. Mass spectra and mass chromatograms have been recorded directly from the TLC plates. Strong cationization by sodium and potassium was obtained in the positive ion mode, with [M+Na-NH3]+ ions being the predominant signals. The TLC-MALDI mass spectra recorded from graphite suspensions showed the lowest background noise and the highest peak intensities from the range of suspension matrices studied. The mass accuracy from graphite films was improved by adding the peptide Phe-Phe to the graphite suspensions. This allowed internal recalibration of the TLC-MALDI mass spectra acquired during a run. One major potential advantage of TLC-MALDI-TOF-MS has been demonstrated in the analysis of chlortetracycline and tetracycline in a mixture of oxytetracycline, chlortetracycline, tetracycline and minocycline. Examination of the TLC plate prior to MALDI analysis showed only an unresolved spot for chlortetracycline and tetracycline. However by investigation of the MALDI mass spectra and plotting of single ion chromatograms separate peaks for chlortetracycline and tetracycline could be obtained.     

Effect of metal cationization on the tandem mass spectra of glycosyl dithioacetals

The effect of metal cationization on the tandem mass spectra of glycosyl dithioacetals of glucose, mannose, galactose, rhamnose, arabinose and xylose was studied by electrospray ionization mass spectrometry under ammonium and metal (Li, Na, Ag and Cu) ion cationization conditions. The ammonium-cationized glycosyl dithioacetals fragment by loss of ammonia followed by either two molecules of EtSH or one molecule of EtSH and one molecule of H2O. Lithium cationization leads to additional eliminations such as EtSEt and EtSSEt and C-C cleavages. Elimination of EtSH is not observed under sodium cationization. Silver cationization, on the other hand, leads to additional fragmentations involving the elimination of silver as AgOH and AgSEt. Copper cationization results in adducts where copper has undergone a change of oxidation state from II to I. Li+, Ag+ and Cu+ cationization seem to favour cyclization resulting in elimination of EtSH. However, the mechanisms seem to be differently affected by different metal ions. Li+ and Ag+ cationization appear to be non-specific and favour cyclization involving C2-, C4- and C5-hydroxyl hydrogens, whereas Cu+ cationization seems to favour cyclization involving C4-hydroxyl hydrogen.     

Molecular weight analysis of water‐soluble poly(phenylene ethynylene)s using MALDI‐TOF MS

Molecular weights of seven poly(phenylene ethynylene)‐based water‐soluble conjugated polyelectrolytes (CPEs) obtained through Sonogashira coupling are determined by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS). A standard sample preparation protocol is developed to characterize the seven CPEs using 2,5‐dihydroxybenzoic acid as the matrix (M) and AgTFA as the cationization reagent (CR). High‐quality MALDI mass spectra are obtained at volume mixing ratios (CPE/M/CR) of 5/5/1 for anionic polymers (P1–P4) and 5/50/1 for cationic polymers (P5–P7). Molecular weight, molecular weight distribution, and end‐group information are analyzed. The effects of molecular weight of CPEs on optical and quenching properties are also studied. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2537–2543     

Investigations of matrix-assisted laser desorption/ionization sample preparation by time-of-flight secondary ion mass spectrometry

Matrix-assisted laser desorption/ionization (MALDI) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) analyses are compared to gain insight into some of the details of sample preparation for MALDI analysis of synthetic polymers. ToF-SIMS imaging of MALDI samples shows segregation of the cationization agent from the matrix crystals. The amount of observed segregation can be controlled by the sample preparation technique. Electrospray sample deposition minimizes segregation. Comparing ToF-SIMS and MALDI mass spectra from the same samples confirms that ToF-SIMS is significantly more surface sensitive than MALDI. This comparison shows that segregation of the oligomers of a polymer sample can occur during MALDI sample preparation. Our data indicate that MALDI is not as sensitive to those species dominating the sample surface as to species better incorporated into the matrix crystals. Finally, we show that matrix-enhanced SIMS can be an effective tool to analyze synthetic polymers, although the sample preparation conditions may be different than those optimized for MALDI.     

Reduction of Cu(II) in matrix-assisted laser desorption/ionization mass spectrometry

The mechanisms of the reduction of Cu(II) in matrix-assisted laser desorption/ionization mass spectrometry (MALDI) are studied. In MALDI mass spectra, ions cationized by copper mostly contain Cu(I) even if Cu(II) salts are added to the sample. It was found that Cu(II) was reduced to Cu(I) by gas-phase charge exchange with matrix molecules, which is a thermodynamically favorable process. Under some conditions, large amounts of free electrons are present in the plume. Cu(II) can be even more efficiently reduced to Cu(I) by free electron capture in the gas phase. The matrices studied in this work are nicotinic acid, dithranol, and 2,5-dihydroxybenzoic acid.     

Silver cluster interferences in matrix-assisted laser desorption/ionization (MALDI) mass spectrometry of nonpolar polymers

Potential difficulties associated with background silver salt clusters during matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) of nonpolar polymers are reported. Silver salt cluster ions were observed from m/z 1500 to 7000 when acidic, polar matrices, such as 2,5-dihydroxybenzoic acid (DHB), all-trans-retinoic acid (RTA) or 2-(4-hydroxyphenylazo)benzoic acid (HABA), were used for the analysis of nonpolar polymers. These background signals could be greatly reduced or eliminated by the use of nonpolar matrices such as anthracene or pyrene. Representative examples of these background interferences are demonstrated during the analysis of low molecular weight nonpolar polymers including polybutadiene and polystyrene. Nonpolar polymers analyzed with acidic, polar matrices (e.g., RTA) and silver cationization reagents can yield lower quality mass spectral results when interferences due to silver clusters are present. Replacing the polar matrices with nonpolar matrices or the silver salts with copper salts substantially improved the quality of the analytical results. In addition, it was found that silver contamination cannot be completely removed from standard stainless steel sample plates, although the presence of silver contamination was greatly reduced after thorough cleaning of the sample plate with aluminum oxide grit. Carry-over silver may cationize polymer samples and complicate the interpretation of data obtained using nonpolar matrices in the absence of added cationization reagents.     

EPR, magnetic and spectral studies of copper(II) and nickel(II) complexes of schiff base macrocyclic ligand derived from thiosemicarbazide and glyoxal

A new macrocylic Schiff base 1,2,5,6,8,11-hexaazacyclododeca-7,12-dithione-2,4,8,10-tetraene(H(2)L(4)) containing thiosemicarbazone moiety is readily prepared and characterized for the first time with fairly good yield. Macrocylic ligand (H(2)L(4)) is prepared from the mesocyle 6-ethoxy-4-thio-2,3,5-triazine(H(2)L(3)) in ethanol with copper chloride acting as template using high dilution technique. The complexes of macrocylic ligand with a general composition M(H(2)L(4))X(2) [where M=Cu(II) or Ni(II); H(2)L(4)=1,2,5,6,8,11-hexaazacyclo dodeca-7,12-dithione-2,4,8,10-tetraene; X= Cl(-), NO(3)(-), (1)/(2)SO(4)(2-)] and ML(4) (where metal salt used to synthesize complex is copper acetate and nickel thiocyanate) have been synthesized. The complexes were characterized on the basis of elemental analysis, molar conductance, magnetic susceptibility, IR, electronic, 1H NMR, mass and EPR spectral studies. The complexes from H(2)L(4) show different stoichiometry ratio and with a variable grade of deprotonation in the ligand, depending upon the salt used and working conditions.     

Electrospray droplet impact/secondary ion mass spectrometry (EDI/SIMS) using NaF and AgF as cationization matrices

In our previous paper, it was suggested that metal fluorides may be useful as cationization matrices in Electrospray droplet impact/SIMS. In this work, NaF and AgF were used as the cationization matrices for cyclodextrin (CD), polyethylene glycol (PEG), polystyrene (PS), garlic juice, and sliced raw rice. EDI mass spectra were measured without and with the use of matrices. Enhancement of ion abundances of [M + Na]⁺ for CD and PEG with NaF matrix and that of [M + Ag]⁺ for PS with AgF matrix were observed. However, the addition of matrices was not effective for the cationization of garlic juice and sliced raw rice samples. This may be due to the Coulombic repulsion of the reagent ions of Na⁺ or Ag⁺ with the preformed K⁺ adducts of oligosaccharides already present in the samples. Copyright © 2015 John Wiley & Sons, Ltd.     

Improved PSD and CID on a MALDI TOFMS

The influence of several instrument-operating parameters on the product-ion resolution and mass accuracy in matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) post-source decay (PSD) and collision-induced dissociation (CID) experiments is reported. Voltages commonly applied to the reflectron for PSD and CID experiments were found to be non-ideal; optimization of these voltages resulted in better resolution across each segment of the measured PSD spectrum. Mass resolution, calculated as M/DeltaM (FWHM) for the product-ion peaks, was as high as 2500. Additionally, precursor-ion selection and segment mass range setup were each found to have dramatic influences on product-ion mass accuracy. An understanding of the influence of these variables aided in the interpretation of (a-NH3) and (b - NH3) ions observed in the PSD/CID spectra of a number of peptides. In addition, product ions resulting from coincidence peaks in the precursor-ion selection window were found to be a general problem. With the improvements to resolution and optimization of these mass accuracy variables, the mass accuracy of product ions from MALDI TOF PSD and CID experiments was tested with several reference materials, including the peptides Substance P, bradykinin, angiotensin I, and angiotensin II and the synthetic polymers poly(methyl methacrylate) and polystyrene. The absolute error (Da) for each test material was, on average, below 0.1 Da, demonstrating a significant improvement in mass accuracy using the improved operational parameters and an extension of the use of poly(ethylene glycol) (PEG) as a mass calibrant for the PSD/CID spectra.