Instrumental neutron absorption activation analysis

We present and discuss a modification of instrumental neutron activation analysis (INAA) that is sensitive for nuclides that do not yield (suitable) activation products but have high cross sections for neutron absorption. Their presence in a sample may thwart INAA by neutron flux suppression inside the sample, but they remain undetected and thus unnoticed by the analyst. In particular, this refers to Li, B, Cd and Gd. The proposed method—instrumental neutron absorption activation analysis (INAAA)—takes advantage of the flux depression inside the sample caused by the neutron absorbers. It is made visible by addition of an activatable nuclide (indicator). The concentration of the neutron absorber (analyte) causes a decrease in activity of the indicator. The activity difference between a mixed sample (sample plus indicator) and the pure indicator carries the analytical information. The calibration curve hence follows a reciprocal exponential function. In a proof-of-principle experiment, the applicability for the quantification of boron was exemplified. In presence of only one neutron absorber (whose nature is known), INAAA can be applied easily for quantification of the analyte in powdered or liquid samples. Although INAAA is no trace sensitive method, it has the potential to increase the reliability of INAA analyses by fast and straightforward quality control (even in presence of two or more neutron absorbing nuclides). It is especially suited for research reactors that do not operate a prompt gamma neutron activation analysis (PGNAA) station.     

Instrumental neutron activation analysis for determining Mo in uranium containing materials

A purely instrumental method for the determination of Mo in uranium containing materials is presented. The precision and accuracy were verified by the analysis of several Standard Reference Materials with different proportions of Mo and U. Detection limits varied from 0.8 to 1.3 g/g for Mo. The method can be applied to determine Mo in the studies of agricultural zone characterization.     

Instrumental neutron activation analysis of urinary calculi

Five kinds of urinary stones from 42 patients have been determined for a total of 19 elements by instrumental neutron activation analysis. Of these elements, Ca, Mg, Sr, Na, and Cl are found to be present in the core of all kinds of stones. The differences in elemental composition among the different kinds of stones as well as across the layers of stone are statistically evaluated.     

Determination of impurities in ice-cores form the Jungfrau-Joch by neutron activation analysis

An ice-core of 4 m length was drilled at the Jungfraujoch. It was divided into 18 sections and analyzed for solid and dissolved material by neutron activation analysis using nondestructive counting as well as chemical group separations. The solid material was identified as stone dust. Part of the dissolved material seems to originate from dissolved limestone, whereas many elements can not be accounted for by this hypothesis and must be due to atmospheric fallout.     

Instrumental neutron activation analysis of brewer's yeast

Instrumental neutron activation was used for the determination of 23 trace and minor elements in 4 different samples of brewer's yeast. Detection limits for these elements vary from 2 ppb to 100 ppm. The following average concentrations were found (ppm, dry weight): Al 597, Br 0.36, Cl 1473, Co 0.21, Cu 19, Fe 285, K 16 400, Mg 1355, Mn 8.4, Na 2330, Rb 19, Sb 0.053, Se 1.2, V 2.2 and Zn 80. NBS standard 1569 was also analyzed and the following concentrations (in ppm) were measured: Al 2300, Br 0.65, Ce 0.23, Cl 460, Co 0.26, Cr 2.12, Cu 11, Fe 707, Gd 7.1, Hf 0.13, K 15 500, Mg 1780, Mn 7, Na 510, Rb 16, Sb 0.075, Sc 0.18, Se 0.92, Th 3.7, Ti 38, U 0.49, V 4.1 and Zn 70.     

Instrumental neutron activation analysis of gunpowder residues

A procedure has been developed for the detection of gunpowder residues deposited on the hand of a person firing a gun. The method is based on neutron activation analysis of the antimony level on the surface of the hand. The surface materials are removed by a film made by spraying a 4% solution of cellulose acetate in acetone, which sets to form a thin film that can readily be stripped off. This technique was found to be preferable to the paraffin-lift technique which is in common use. Following neutron activation of the film in a nuclear reactor, antimony is assayed by high-resolution Ge(Li) spectrometry without prior chemical processing. The sensitivity of the method is about 5·10⁻⁹ g Sb, with a precision of about ±10% at a neutron flux of 5·10¹³ n·cm⁻²·sec⁻¹. Analysis of twenty samples taken from the hands of persons who had fired a pistol gave Sb levels of 0.4±0.2 μg, compared with 0.024±0.013 μg found on the hands of persons who had not fired a revolver. The possible extension of the present technique to include the determination of additional elements is discussed. Project carried out with the support of the Office of the Chief Scientist to the Ministry of Defense and with the collaboration of the Israel Police.     

Instrumental neutron activation analysis of blood serum

Instrumental neutron activation analysis has been used to determine 15 trace elements in twelve blood serum samples taken from healthy students at Bilkent University in Ankara. The method allowed the determination of Sc, Cr, Mn, Fe, Co, Zn, Se, Rb, Cs, Ce, Eu, Tb, Hf, Ta and Hg, which occur at the g.ml^–1 to ng.ml^–1 levels. There are no values reported for Tb, Hf, Ce, Eu and Ta before. The other results are compared with the values reported in the literature. Most are in the range of the reported values except for Fe, Zn, Se and Cs.     

Instrumental neutron activation analysis of Obsidian rock

An instrumental neutron activation analysis technique has been developed for the simultaneous determination of up to 30 elements including major, minor and trace elements in Obsidian Rock (a proposed NBS-SRM-278). INAA method involves both short and long irradiations followed by gamma-ray activity measurement with a Ge(Li) detector. The accuracy of the procedure has been checked by analyzing IAEA Reference Materials.     

Instrumental thermal neutron activation analysis of tobacco

A group of 27 tobacco samples was submitted to INAA. Bowen's Kale was analyzed with the samples. The resulting data for 21 elements in tobacco were processed by a cluster programme. This combination proves to be a convenient tool for discrimination within one group of samples.     

Instrumental neutron activation analysis of peloids from main Cuban spas

Journal of Radioanalytical and Nuclear Chemistry - Peloids from some Cuban spas (San Diego, Elguea, Santa Lucía, Cajío and Colony) have been studied using Instrumental Neutron Activation...     

Instrumental neutron activation analysis of spherule samples recovered from the Pacific ocean sea sediment and Antarctic ice sheet

Chemical compositions of spherules separated from deep sea sediment dredged off Hawaiian islands and from Antarctic ice were measured by instrumental neutron activation analysis (INAA) using Kyoto University Reactor (KUR). Iron, cobalt, nickel, iridium, scandium and manganese contents in those spherules were determined to be 19.3–97.7%, 23–4370 mg·kg⁻¹, 0.08–7.04%, 0.84–35.4 mg·kg⁻¹, 1.4–44.3 mg·kg⁻¹ and 93.4 mg·kg⁻¹–7.2 %, respectively, and compared with each other. Particularly, iridium was detected in seven spherules among fourteen from Hawaii, but only one spherule among twenty-two from Antarctic, and those spherules turned out to be extraterrestrial in origin. However, it was shown that there was little difference in characteristics of elemental contents between both kinds of spherules, except for Ir-detected spherules.     

Instrumental neutron activation analysis of wheat bunt spores

The concentrations of seventeen elements in two species of fungus which cause wheat bunt disease,Tilletia caries (DC.) Tul. andTilletia controversa Kühn, were determined by instrumental neutron activation analysis. Differences in the K and Cl concentrations between these two species of spores are large and therefore can be used as a criterion for distinguishing between the two species of fungus.     

Instrumental neutron activation analysis of semiconductor grade silicon

The single comparator method in neutron activation analysis has been applied to the investigation of the purity of silicon single-crystals of different origins. The following impurities were determined: Au, Sb, Co, Cu and Na. Studies were also carried out on the surface contamination of silicon samples introduced through steps of sample preparation and irradiation. Up to nineteen elements on the surface of samples were analysed and found to be easily reduced to low levels or detection limits by washing and etching.     

Instrumental neutron activation analysis of some ancient punchmark coins from India

A nondestructive instrumental neutron activation analysis technique is applied for the analysis of precious ancient punchmark coins. Coins ranging between 8th century B.C. to 2nd century B.C. were irradiated with thermal neutrons in a²⁵²Cf neutron source facility and analyzed by comparator method of instrumental neutron activation analysis, using high purity germanium detector coupled to a multichannel analyzer, the activities being measured at photopeak energies of the corresponding radioisotopes. It is observed that punchmark coins are mainly of two types: copper or silver based. Other elements present in varying proportions are gold, arsenic and antimony.     

Instrumental neutron activation analysis of phosphorus in rocks

The possibilities are discussed of the instrumental activation analysis of phosphorus in rocks by the reaction³¹P(n, γ)³²P (T=14.2 d). Results are given for six standard rocks of the U.S. Geological Survey.     

Instrumental neutron activation analysis of carbonatites from Homa Mountain, Kenya

Twenty eight (major and trace) elements including eight rare earth elements (REEs) in African carbonatite samples were determined by instrumental neutron activation analysis. The geochemical behavior of trace elements was studied in relation to the order of carbonatite intrusion from C1 to C4 through C2 and C3 at Homa Mountain, Kenya. The enrichment of Mn, Fe, Sr, Ba, Th, U and REE is found in the sixteen carbonatites examined in this study. The general increase in the concentrations of Na, Sc, Mn, Sb, Ba, Th, U and REE occurs from C1 to C4 through C2 and C2c, but C3 carbonatite shows a different pattern. The C3 carbonatite is extraordinarily enriched in Mn, Fe and Ba and is highly enriched in Cr, As, Sb and Th. The chondrite-normalized REE distribution pattern of the C3 carbonatite is not rich in the light REE. Strong fractionation between light and heavy REEs is found in the carbonatites, and moderate fractionation in the two alkalic igneous rock samples. In order to evaluate partitioning of REEs into carbonate, oxide and other mineral fractions, a selective chemical leaching technique on carbonatites was applied and is discussed in this study. This revised version was published online in August 2006 with corrections to the Cover Date.     

Instrumental neutron activation analysis of air filter samples

Résumé La mesure de traces d'éléments dans l'air ambiant a fait l'objet d'une attention accrue ces derniers mois, en raison d'un intérêt grandissant pour les dangers en puissance pour la santé, qui résultent de l'exposition prolongée à certaines substances toxiques. L'analyse par activation neutronique a été employée avec succès dans la recherche de traces d'éléments, et ce, pour un grand nombre d'études de l'environnement; elle semble convenir de fa?on idéale pour la détermination non-destructive multi-élémentaire de la composition de milieux de particules portées par l'air. Dans cet article, on rend compte des performances de l'analyse instrumentale par activation neutronique comme on le montre dans le cas de 40 échantillons d'air filtrées provenant d'une zone métropolitaine.      

Instrumental neutron activation analysis technique using subsecond radionuclides

The fast irradiation facility Mach-1 installed at the Danish DR 3 reactor has been used in boron determinations by means of Instrumental Neutron Activation Analysis using¹²B with 20-ms half-life. The performance characteristics of the system are presented and boron determinations of NBS standard reference materials as well as fertilizer materials are compared by literature value and spectrophotometric measurements, respectively. In both cases good agreement is obtained.     

Instrumental neutron activation analysis for the elemental analysis of cement

Cement is widely used as a construction material in Libya. Production plants introduce certain contaminants to the environment. The dust from such plants is carried away to neighbouring areas. This dust contains a substantial amount of contaminants depending on the origin of clays used in the production. In this study, a survey of elemental concentration of clay and cement was carried out to assess the environmental impact of such plants, especially those that are situated near residential and agricultural areas. Cement and clay samples, imported and locally produced, were analyzed. Instrumental neutron activation analysis was utilized to determine the elemental concentration of As, Ca, Ce, Co, Cr, Eu, Fe, Hf, La, Na, Rb, Sb, Sc, Sm, Ta, Th, U, Yb and Zn. Elevated concentrations of U and Th were found in a number of cement samples. The two nuclides are part of an elaborate decay scheme producing a range of radioactive elements, which emit alpha-, beta- and gamma-radiation. With ⁴⁰K, they could give elevated levels of background radiation in buildings resulting in higher exposure doses. This could pose a health hazard and a detrimental effect on the well being of residents, especially in poor ventillated buildings. Also, cement is the main component for constructing underground reservoirs for collecting rainwater for drinking in private residences, so some harmful elements could leach into water. This is the first comprehensive survey of commercial cement brands and clays used in Libya. These results are intended to build a database for trace element concentrations using INAA.     

Instrumental neutron activation analysis of samples with masses from micrograms to hectograms

The rotating rig at the Danish DR-3 reactor was used for irradiation of samples with masses from a hundred micrograms to several hundred grams. The pneumatic post for uranium delayed neutron counting was used for automatic sequential irradiation of samples subdivided into up to 24 aliquots, each with a volume of 7 cm³. The cumulative samples were measured in polyethylene irradiation containers in a specially designed radial holder.