Synthesis of novel chiral [2.2.1]cryptands incorporating sugars

Chiral N, N'-dimethyl diaza-crown ethers bearing functionalized α-D-gluco-, α-D-galacto-, and α-D-mannopyranoside residues are transformed into the corresponding [2.2.1]cryptands with bis(2-iodoethyl) ether under high-pressure conditions and subsequent demethylation. Alternatively, α-D-manno-diaza-18-crown-6 reacts with diglycolic acid dichloride under high-dilution conditions to form bisamide which is reduced to the corresponding chiral [2.2.1]cryptand.     

Application of tetraoxadiaza-crown ether derivatives as chiral selector modifiers in capillary electrophoresis

Two new diaza-crown ether derivatives (R-1, RS-1) have been synthesized from 1,4,10,13-tetraoxa-7,16-diazacyclooctadecane and tested as potential chiral selectors in capillary electrophoresis (CE) for the chiral separation of five amino acid derivatives. The individual use of the selectors did not lead to chiral differentiation. However, they enhanced the enantioselective effect of different cyclodextrins in dual selector systems. In this paper, we report the effect of different substituted diaza-crown ether derivatives on the separation results obtained in dual systems with cyclodextrins.     

Synthesis of new alkyl- alkenyloxy- and hydroxy-substituted diaza-crown compounds

New diaza-crown compounds with the macro ring nitrogen atoms situated in the 1, 4-, 1, 7- and 1, 10-positions have been prepared. All of the new macrocycles contain alkyl groups on the nitrogen atoms and a functional group substituent in the form of either an allyloxymethyl, allyloxy or hydroxy group on one of the macro ring carbon atoms. A 1, 4-diaza-crown attached to silica gel removes Hg(II) ions from an aqueous mixture of Hg(II), Cd(II) and Zn(II) ions.     

Mass spectrometry of macroheterocycles. 2. Characteristics of the fragmentation of azacrown ethers under electron impact

The fragmentation of aza-crown and diaza-crown ethers under electron impact was studied. It is shown that for the former the primary pathways of fragmentation of the molecular ions involve the intracyclic migration of a hydrogen atom and the elimination of C₂H₃O and CH₂OH particles. A characteristic feature of the diaza-crown ethers is the ejection of a divinylaminyl radical.For Communication 1 see [1].Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 242–246, February, 1992.     

Synthesis,Biological Evaluation,and Molecular Modeling of Aza-Crown Ethers

Synthetic and natural ionophores have been developed to catalyze ion transport and have been shown to exhibit a variety of biological effects. We synthesized 24 aza- and diaza-crown ethers containing adamantyl, adamantylalkyl, aminomethylbenzoyl, and ε-aminocaproyl substituents and analyzed their biological effects in vitro. Ten of the compounds (8, 10–17, and 21) increased intracellular calcium ([Ca²⁺]_i) in human neutrophils, with the most potent being compound 15 (N,N’-bis[2-(1-adamantyl)acetyl]-4,10-diaza-15-crown-5), suggesting that these compounds could alter normal neutrophil [Ca²⁺]_i flux. Indeed, a number of these compounds (i.e., 8, 10–17, and 21) inhibited [Ca²⁺]_i flux in human neutrophils activated by N-formyl peptide (fMLF). Some of these compounds also inhibited chemotactic peptide-induced [Ca²⁺]_i flux in HL60 cells transfected with N-formyl peptide receptor 1 or 2 (FPR1 or FPR2). In addition, several of the active compounds inhibited neutrophil reactive oxygen species production induced by phorbol 12-myristate 13-acetate (PMA) and neutrophil chemotaxis toward fMLF, as both of these processes are highly dependent on regulated [Ca²⁺]_i flux. Quantum chemical calculations were performed on five structure-related diaza-crown ethers and their complexes with Ca²⁺, Na⁺, and K⁺ to obtain a set of molecular electronic properties and to correlate these properties with biological activity. According to density-functional theory (DFT) modeling, Ca²⁺ ions were more effectively bound by these compounds versus Na⁺ and K⁺. The DFT-optimized structures of the ligand-Ca²⁺ complexes and quantitative structure-activity relationship (QSAR) analysis showed that the carbonyl oxygen atoms of the N,N’-diacylated diaza-crown ethers participated in cation binding and could play an important role in Ca²⁺ transfer. Thus, our modeling experiments provide a molecular basis to explain at least part of the ionophore mechanism of biological action of aza-crown ethers.     

A family of new glutarate compounds: synthesis, crystal structures of: Co(H2O)5L(1), Na2[CoL2] (2), Na2[L(H2L)4/2] (3), {[Co3(H2O)6L2](HL)2}.4H2O (4), {[Co3(H2O)6L2](HL)2}.10H2O (5), {[Co3(H2O)6L2]L2/2}.4H2O (6), and Na2{[Co3(H2O)2]L8/2].6H2O (7), and magnetic properties of 1 and 2 with H2L = HOOC-(CH2)3-COOH

Seven new glutaric acid complexes, Co(H 2O) 5L 1, Na 2[CoL 2] 2, Na 2[L(H 2L) 4/2] 3, {[Co 3(H 2O) 6L 2](HL) 2}.4H 2O 4, {[Co 3(H 2O) 6L 2](HL) 2}.10H 2O 5, {[Co 3(H 2O) 6L 2]L 2/2}.4H 2O 6, and Na 2{[Co 3(H 2O) 2]L 8/2].6H 2O 7 were obtained and characterized by single-crystal X-ray diffraction methods along with elemental analyses, IR spectroscopic and magnetic measurements (for 1 and 2). The [Co(H 2O) 5L] complex molecules in 1 are assembled into a three-dimensional supramolecular architecture based on intermolecular hydrogen bonds. Compound 2 consists of the Na (+) cations and the necklace-like glutarato doubly bridged [ C o L 4 / 2 ] 2 - infinity 1 anionic chains, and 3 is composed of the Na (+) cations and the anionic hydrogen bonded ladder-like [ L ( H 2 L ) 4 / 2 ] 2 - infinity 1 anionic chains. The trinuclear {[Co 3(H 2O) 6L 2](HL) 2} complex molecules with edge-shared linear trioctahedral [Co 3(H 2O) 6L 2] (2+) cluster cores in 4 and 5 are hydrogen bonded into two-dimensional (2D) networks. The edge-shared linear trioctahedral [Co 3(H 2O) 6L 2] (2+) cluster cores in 6 are bridged by glutarato ligands to generate one-dimensional (1D) chains, which are then assembled via interchain hydrogen bonds into 2D supramolecular networks. The corner-shared linear [Co 3O 16] trioctahedra in 7 are quaternate bridged by glutarato ligands to form 1D band-like anionic {[Co 3(H 2O) 2]L 8/2} (2+) chains, which are assembled via interchain hydrogen bonds into 2D layers, and between them are sandwiched the Na (+) cations. The magnetic behaviors of 1 and 2 obey the Curie-Weiss law with chi m = C/( T - Theta) with the Curie constant C = 3.012(8) cm (3) x mol (-1) x K and the Weiss constant Theta = -9.4(7) K for 1, as well as C = 2.40(1) cm (3) x mol (-1) x K and Theta = -2.10(5) K for 2, indicating weak antiferromagnetic interactions between the Co(II) ions.     

O-confused oxaporphyrin--an intermediate in formation of 3-substituted 2-oxa-21-carbaporphyrins

[Reaction: see text]. A condensation of 2,4-bis(phenylhydroxymethyl)furan with pyrrole and p-toluylaldehyde in the presence of ethanol formed 5,20-diphenyl-10,15-di(p-tolyl)-2-oxa-3-ethoxy-3-hydro-21-carbaporphyrin [(H,EtO)OCPH]H2. The new carbaporphyrinoid has 1H NMR features of an aromatic molecule, including the upfield shift of the inner H(21) atom (-5.48 ppm). Addition of acid removes the ethoxy substituent and converts [(H,EtO)OCPH]H2 into the dication of "true" O-confused oxaporphyrin {[(H)OCPH]H3}2+ via an exocyclic C(3)-O bond cleavage followed by an elimination of the ethoxy group as determined by 1H NMR. Addition of ethanol, water, or pyrrole converts {[(H)OCPH]H3]2+ into [(H,EtO)OCPH]H2, [(H,OH)OCPH]H2, or pyrrole appended O-confused porphyrin [(H,pyrrole)OCPH]H2, respectively. The reaction of [(H,OEt)OCPH]H2 with silver(I) acetate yields a stable Ag(III) complex [(H,OEt)OCP]AgIII substituted at the C(3) position by the ethoxy group and hydrogen. Coordination through the nitrogen donors is reflected by the presence of 107/109Ag scalar splitting seen for the selected -H pyrrolic signals. Addition of TFA to [(H,OEt)OCP]AgIII produces a weakly aromatic O-confused porphyrin complex {[(H)OCP]AgIII}+. In the course of this reversible process the tetrahedral-trigonal rearrangements originate at the C(3) atom but extend its consequences on the whole structure. Insertion of silver into the hydroxy analogue of [(H,OEt)OCPH]H2, i.e., [(H,OH)OCPH]H2, was accompanied by ligand oxidation, yielding carbaporpholactone which contains the lactone functionality instead of the regular furan moiety embedded in the carbaporphyrin ligand of [(O)OCP]AgIII. The structure was determined by X-ray crystallography. The macrocycle is only slightly distorted from planarity, and silver(III) is located in the NNNC plane.     

Synthesis of 5-hydroxy-2,3,4,5-tetrahydro-[1H]-2-benzazepin-4-ones: selective antagonists of muscarinic (M3) receptors

Two approaches to tetrahydro-[1H]-2-benzazepin-4-ones of interest as potentially selective, muscarinic (M(3)) receptor antagonists have been developed. Base promoted addition of 2-(tert-butoxycarbonylamino)methyl-1,3-dithiane with 2-(tert-butyldimethylsiloxymethyl)benzyl chloride gave the corresponding 2,2-dialkylated 1,3-dithiane which was taken through to the dithiane derivative of the parent 2,3,4,5-tetrahydro-[1H]-2-benzazepin-4-one by desilylation, oxidation and cyclisation via a reductive amination. After conversion into the N-tert-butyloxycarbonyl, N-toluene p-sulfonyl and N-benzyl derivatives , hydrolysis of the dithiane gave the N-protected tetrahydro-[1H]-2-benzazepin-4-ones . However, preliminary attempts to convert these into 5-cycloalkyl-5-hydroxy derivatives were not successful. In the second approach, ring-closing metathesis was used to prepare 2,3-dihydro-[1H]-2-benzazepines which were hydroxylated and oxidized to give the required 5-hydroxy-2,3,4,5-tetrahydro-[1H]-2-benzazepin-4-ones. Following preliminary studies, ring-closing metathesis of the dienyl N-(2-nitrophenyl)sulfonamide gave the dihydrobenzazepine which was converted into the 2-butyl-5-cyclobutyl-5-hydroxytetrahydrobenzazepin-4-one by hydroxylation and N-deprotection followed by N-alkylation via reductive amination, and oxidation. This chemistry was then used to prepare the 2-[(N-arylmethyl)aminoalkyl analogues , , and . N-Acylation followed by amide reduction using the borane-tetrahydrofuran complex was also used to achieve N-alkylation of dihydrobenzazepines and this approach was used to prepare the 5-cyclopentyl-5-hydroxy-2,3,4,5-tetrahydro-[1H]-2-benzazepin-4-one and the 5-cyclobutyl-8-fluoro-5-hydroxy-2,3,4,5-tetrahydro-[1H]-2-benzazepin-4-one . The structures of 2-tert-butyloxycarbonyl-4,4-propylenedithio-2,3,4,5-tetrahydro-[1H]-2-benzazepine and (4RS,5SR)-2-butyl-5-cyclobutyl-4,5-dihydroxy-2,3,4,5-tetrahydro-[1H]-2-benzazepine were confirmed by X-ray diffraction. The racemic 5-cycloalkyl-5-hydroxy-2,3,4,5-tetrahydro-[1H]-2-benzazepin-4-ones were screened for muscarinic receptor antagonism. For M(3) receptors from guinea pig ileum, these compounds had log(10)K(B) values of up to 7.2 with selectivities over M(2) receptors from guinea pig left atria of approximately 40.     

Biosynthetic studies on the cyclopentane ring formation of allosamizoline, an aminocyclitol component of the chitinase inhibitor allosamidin

Allosamizoline (1) is an aminocyclitol component of allosamidin, a Streptomyces metabolite, and has a cyclopentane ring originated from D-glucosamine. Biosynthesis of the cyclopentane ring was studied by feeding experiments with a variety of deuterium-labeled glucosamine and glucose. In the feeding experiments with [3-(2)H]- and [4-(2)H]-D-glucosamine and [1-(2)H]-D-glucose, deuterium was incorporated into C-3, C-4, and C-1 of 1, respectively. On the other hand, feeding experiments with [5-(2)H]- and [6,6-(2)H(2)]-D-glucosamine showed that deuterium on C-5 and one of the two deuterium atoms on C-6 of glucosamine were lost during the cyclopentane ring formation of 1. In the feeding experiments with (6R)- and (6S)-[6-(2)H(1)]-D-glucose, the (6R)-deuterium of glucose was incorporated into the proS position on C-6 of 1, but the (6S)-deuterium of glucose was not incorporated into 1. These results suggested that an intermediate with a 6-aldehyde group is involved in the biosynthesis of the cyclopentane ring moiety of 1 and overall inversion of stereochemistry of the C-6 methylene group occurred by stereospecific oxidation and reduction on C-6 during the formation of 1. The 6-aldehyde intermediate may play a key role in the biosynthetic step(s) of cyclization to form the cyclopentane ring and/or deoxygenation at C-5.     

pH-dependent H2-activation cycle coupled to reduction of nitrate ion by CpIr complexes.

This paper reports a pH-dependent H2-activation [H2 (pH 1-4) --> H+ + H- (pH -1) --> 2H+ + 2e-] promoted by CpIr complexes [Cp = eta5-C5(CH3)5]. In a pH range of about 1-4, an aqueous HNO3 solution of [CpIr(III)(H2O)3]2+ (1) reacts with 3 equiv of H2 to yield a solution of [(CpIr(III))2(mu-H)3]+ (2) as a result of heterolytic H2-activation [2[1] + 3H2 (pH 1-4) --> [2] + 3H+ + 6H2O]. The hydrido ligands of 2 display protonic behavior and undergo H/D exchange with D+: [M-(H)3-M]+ + 3D+ <==>[M-(D)3-M]+ + 3H+ (where M = CpIr). Complex 2 is insoluble in a pH range of about -0.2 (1.6 M HNO3/H2O) to -0.8 (6.3 M HNO3/H2O). At pH -1 (10 M HNO3/H2O), a powder of 2 drastically reacts with HNO3 to give a solution of [CpIr(III)(NO3)2] (3) with evolution of H2, NO, and NO2 gases. D-labeling experiments show that the evolved H2 is derived from the hydrido ligands of 2. These results suggest that oxidation of the hydrido ligands of 2 [[2] + 4NO3- (pH -1) --> 2[3] + H2 + H+ + 4e-] couples to reduction of NO3- (NO3- --> NO2- --> NO). To complete the reaction cycle, complex 3 is transformed into 1 by increasing the pH of the solution from -1 to 1. Therefore, we are able to repeat the reaction cycle using 1, H2, and a pH gradient between 1 and -1. A conceivable mechanism for the H2-activation cycle with reduction of NO3- is proposed.     

Synthesis and cytotoxic activity of benzo[a]pyrano[3,2-h] and [2,3-i]xanthone analogues of psorospermine, acronycine, and benzo[a]acronycine

Condensation of 2-hydroxy-1-naphthalenecarboxylic acid with phloroglucinol afforded 9,11-dihydroxy-12H-benzo[a]xanthen-12-one (6). Construction of an additional dimethylpyran ring onto this skeleton, by alkylation with 3-chloro-3-methyl-1-butyne followed by Claisen rearrangement, gave access to 6-hydroxy-3,3-dimethyl-3H,7H-benzo[a]pyrano[3,2-h]xanthen-7-one (12) and 5-hydroxy-2,2-dimethyl-2H,6H-benzo[a]pyrano[2,3-i]xanthen-6-one (13), which were methylated into 6-methoxy-3,3-dimethyl-3H,7H-benzo[a]pyrano[3,2-h]xanthen-7-one (14) and 5-methoxy-2,2-dimethyl-2H,6H-benzo[a]pyrano[2,3-i]xanthen-6-one (15), respectively. Osmium tetroxide oxidation of 14 and 15 gave the corresponding (+/-)-cis-diols 16 and 17, which afforded the corresponding esters 18-21 upon acylation. Similarly, condensation of 2-hydroxy-1-naphthalenecarboxylic acid with 3,5-dimethoxyaniline gave 11-amino-9-methoxy-12H-benzo[a]xanthen-12-one (23) which was converted into 11-amino-9-hydroxy-12H-benzo[a]xanthen-12-one (24) upon treatment with hydrogen bromide in acetic acid. Alkylation with 3-chloro-3-methyl-1-butyne followed by Claisen rearrangement afforded 6-amino-3,3-dimethyl-3H,7H-benzo[a]pyrano[3,2-h]xanthen-7-one (25) and 5-amino-2,2-dimethyl-2H,6H-benzo[a]pyrano[2,3-i]xanthen-6-one (26). The new benzopyranoxanthone derivatives only displayed marginal antiproliferative activity when tested against L1210 and KB-3-1 cell lines. The only compounds found significantly active against L1210 cell line, 16 and 20, belong to the benzo[a]pyrano[3,2-h]xanthen-7-one series, which possess a pyran ring fused angularly onto the xanthone basic core.     

A convenient approach to heterocyclic building blocks: synthesis of novel ring systems containing a [5,6]Pyrano[2,3-c]pyrazol-4(1H)-one moiety

Starting from commercially available educts, a straightforward synthetic route to new heterocyclic building blocks is exemplified with the one- or two-step synthesis of tri-, tetra-, or pentacyclic ring systems. Representatives of the following novel ring systems are prepared from 3-methyl-1-phenyl-2-pyrazolin-5-one and the corresponding o-halo-arenecarbonyl chloride using calcium hydroxide in refluxing 1,4-dioxane: pyrimidino[4',5':5,6]pyrano[2,3-c]pyrazol-4(1H)-one, thieno[3',2':5,6]pyrano[2,3c]pyrazol- 4-(1H)-one, thieno[3',4':5,6]pyrano[2,3-c]pyrazol-4(1H)-one, thieno[3',2':4',5']thieno[2',3':5,6]-pyrano[2,3-c]pyrazol-4(1H)-one, [1,3]dioxolo[5',6'][1]benzothieno[2',3':5,6]pyrano-[2,3-c]- pyrazol-4(1H)-one, pyridazino[4',3':5,6]pyrano[2,3-c]pyrazol-4(1H)-one and pyrazolo-[4',3':5',6']pyrido[3',4':5,6]pyrano[2,3-c]pyrazol-4(1H)-one. While the latter two ring systems are directly obtained due to a spontaneous intramolecular substitution reaction, in the other reactions uncyclised 4-aroylpyrazol-5-ols are produced, which are cyclised into the target heterocycles in a subsequent synthetic step (i.e. treatment with NaH in DMF). Detailed NMR spectroscopic investigations ((1)H-, (13)C-, (15)N-) with the obtained compounds were undertaken to unambiguously prove the new structures.     

Synthesis and crystal structure of uranium(IV) complexes with compartmental Schiff bases: from mononuclear species to tri- and tetranuclear clusters

Treatment of U(acac)4 with the hexadentate Schiff base H2L(i) gave the [UL(i)2] complexes 1-4 [H2L1=N,N'-bis(3-methoxysalicylidene)-2-methyl-1,2-propanediamine, H2L2=N,N'-bis(3-methoxysalicylidene)-1,2-phenylenediamine, H2L3=N,N'-bis(3-methoxysalicylidene)-2-aminobenzylamine and H2L4=N,N'-bis(3-methoxysalicylidene)-2,2-dimethyl-1,3-propanediamine for 1-4, respectively]. The [U(L(i))(acac)2] compounds could not be isolated because of their ready disproportionation into [UL(i)2] and U(acac)4. Compounds 2 and 4 adopt a meridional configuration in the solid state and in solution, while exists in solution as the two equilibrating meridional and sandwich isomers and crystallizes in the meridional isomeric form. Reaction of U(acac)4 with H4L5 afforded the expected compound [U(H2L5)(acac)2] (5) [H4L5=N,N'-bis(3-hydroxysalicylidene)-2-methyl-1,2-propanediamine] but, in the presence of H4L6 and H4L7, U(acac)4 was transformed in a serendipitous and reproducible manner into the tri- and tetranuclear U(IV) complexes [U3(L6)(HL6)2(acac)2] (6) and [U4(HL7)4(H2L7)2] (7) [H4L6=N,N'-bis(3-hydroxysalicylidene)-1,2-phenylenediamine and H4L7=N,N'-bis(3-hydroxysalicylidene)-2-aminobenzylamine]. The crystal structures of 6.3thf and 7.5thf show the assembling role of the Schiff-base ligands.     

Rational design and synthesis of porous organic-inorganic hybrid frameworks constructed by 1,3,5-benzenetriphosphonic acid and pyridine synthons

1,3,5-Benzenetriphosphonic acid, H6BTP, 1,3,5-[(HO)2OP]3C6H3, was reacted hydrothermally with copper salts in the absence and presence of 4,4'-bipyridine (bpy) and 4,4'-trimethlyenedipyridine (tbpy) in a 1:1 molar ratio leading to three new organic-inorganic hybrid frameworks. Compound 1, {Cu6[C6H3(PO3)3]2(H2O)8} x 5.5 H2O, has three different copper ions that are interconnected by the highly charged [1,3,5-(PO3)3C6H3]6- anionic moieties. These moieties self-assemble through tetra-copper units to give a cagelike motif with two benzene rings parallel to each other at a distance of 3.531 A which extend along the a axis and link with a grouping of four-coordinated copper units in the b axis direction to give the cross-linked layered structure. In compound 2, Cu{C6H3[PO(OH)O]2[PO(OH)2]}(C10H8N2), the copper ions are in square pyramidal geometries and are interconnected via chelating and bridging BTP ligands into layers which are further cross-linked by bpy ligands into a pillared layered architecture. Compound 3, {Cu2C6H3[PO(OH)O]2[PO3](C13H14N2)} x 3 H2O x 0.5 HCON(CH3)2, contains tetra-copper units that are linked by BTP ligands and further linked by tbpy linkers in the c axis direction to produce a large channel-sized 3D framework.     

Mixed-metal cluster chemistry. 28. Core enlargement of tungsten-iridium clusters with alkynyl, ethyndiyl, and butadiyndiyl reagents

Reaction of [WIr3(mu-CO)3(CO)8(eta-C5Me5)] (1c) with [W(C[triple bond]CPh)(CO)3(eta-C5H5)] afforded the edge-bridged tetrahedral cluster [W2Ir3(mu4-eta2-C2Ph)(mu-CO)(CO)9(eta-C5H5)(eta-C5Me5)] (3) and the edge-bridged trigonal-bipyramidal cluster [W3Ir3(mu4-eta2-C2Ph)(mu-eta2-C=CHPh)(Cl)(CO)8(eta-C5Me5)(eta-C5H5)2] (4) in poor to fair yield. Cluster 3 forms by insertion of [W(C[triple bond]CPh)(CO)3(eta-C5H5)] into Ir-Ir and W-Ir bonds, accompanied by a change in coordination mode from a terminally bonded alkynyl to a mu4-eta2 alkynyl ligand. Cluster 4 contains an alkynyl ligand interacting with two iridium atoms and two tungsten atoms in a mu4-eta2 fashion, as well as a vinylidene ligand bridging a W-W bond. Reaction of [WIr3(CO)11(eta-C5H5)] (1a) or 1c with [(eta-C5H5)(CO)2 Ru(C[triple bond]C)Ru(CO)2(eta-C5H5)] afforded [Ru2WIr3(mu5-eta2-C2)(mu-CO)3(CO)7(eta-C5H5)2(eta-C5R5)] [R = H (5a), Me (5c)] in low yield, a structural study of 5a revealing a WIr3 butterfly core capped and spiked by Ru atoms; the diruthenium ethyndiyl precursor has undergone Ru-C scission, with insertion of the C2 unit into a W-Ir bond of the cluster precursor. Reaction of [W2Ir2(CO)10(eta-C5H5)2] with the diruthenium ethyndiyl reagent gave [RuW2Ir2{mu4-eta2-(C2C[triple bond]C)Ru(CO)2(eta-C5H5)}(mu-CO)2(CO)6(eta-C5H5)3] (6) in low yield, a structural study of 6 revealing a butterfly W2Ir2 unit capped by a Ru(eta-C5H5) group resulting from Ru-C scission; the terminal C2 of a new ruthenium-bound butadiyndiyl ligand has been inserted into the W-Ir bond. Reaction between 1a, [WIr3(CO)11(eta-C5H4Me)] (1b), or 1c and [(eta-C5H5)(CO)3W(C[triple bond]CC[triple bond]C)W(CO)3(eta-C5H5)] afforded [W2Ir3{mu4-eta2-(C2C[triple bond]C)W(CO)3(eta-C5H5)}(mu-CO)2(CO)2(eta-C5H5)(eta-C5R5)] [R = H (7a), Me (7c); R5 = H4Me (7b)] in good yield, a structural study of 7c revealing it to be a metallaethynyl analogue of 3.     

Syntheses and Crystal Structures of Copper（Ⅱ） and Nickel Complexes with 1,2,3-Triazole-carboxylic Acid

Three novel complexes [Cu(L1)2(H2O)2] (1), [Ni(L1)2(H2O)2]·(H2O)4(2,HL1=5-methyl-1-(4-methylphenyl)-1,2,3-triazole-4-carboxylic acid) and [Ni2 (HL2)2(CH3OH)6]·(CH3OH)2(3,H3L2=1,2,3-triazole-4,5-dicarboxylic acid) were synthesized and characterized by elemental analysis, IR and X-ray diffraction. Complexes 1 and 2 are mononuclear structures, and are assembled into a two-dimensional sheet by C(7) H(7)···O(3) weak interactions or hydrogen-bonding interaction. Complex 3 is a centrosymmetric dinuclear structure, and is assembled into a three-dimensional supramolecular structure by hydrogen-bonding interaction.     

Production and reactions of organic-soluble lanthanide complexes of the monolacunary Dawson [alpha1-P2W17O61]10- polyoxotungstate

The incorporation of lanthanides into polyoxometalates provides entry to new classes of potentially useful materials that combine the intrinsic properties of both constituents. To utilize the [alpha1-Ln(H2O)4P2W17O61]7- species in applications of catalysis and development of luminescent materials, the chemistry of this family of lanthanide polyoxometalates in organic solvents has been developed. Organic-soluble polyoxometalate-lanthanide complexes TBA5H2[alpha1-Ln(H2O)4P2W17O61] (Ln = La(III), Sm(III), Eu(III), Yb(III)) were prepared and characterized by elemental analysis, acid-base titration, IR, 31P NMR, and mass spectrometry. The synthetic procedure involves a cation metathesis reaction in aqueous solution under strict pH control. A solid-liquid-phase transfer protocol yielded a unique species (TBA)8K3[Yb(alpha1-YbP2W17O61)2] with three ytterbium ions and two [alpha1-P2W17O61]10- polyoxotungstates. A centrosymmetric dimeric complex [{alpha1-La(H2O)4P2W17O61}2]14- was crystallized from aqueous solution and characterized by X-ray diffraction. ESI mass spectral analysis of the complexes TBA5H2[alpha1-Ln(H2O)4P2W17O61] shows that similar dimers exist in organic solution, in particular for the early lanthanides. Fragmentation in the mass spectrometer of the complexes from dry acetonitrile solution involves double protonation of an oxo ligand and loss of one water molecule. Low mass tungstate fragments combine into [(WO3)n]2- (n = 1-5) ions and their condensation products with phosphate. Reaction of TBA5H2[alpha1-Eu(H2O)4P2W17O61] with 1,10-phenanthroline or 2,2'-bipyridine showed an increase of the europium luminescence. This result is explained by the formation of a ternary complex of [alpha1-Eu(H2O)4P2W17O61]7- and two sensitizing ligands.     

Oxygen capture by lithiated organozinc reagents containing aromatic 2-pyridylamide ligands

The sequential reaction of ZnMe2 with a 2-pyridylamine (HN(2-C5H4N)R, R = Ph: 1; 3,5-Xy (=3,5-xylyl): 2; 2,6-Xy: 3; Bz (=benzyl): 4; Me: 5), tBuLi and thereafter with oxygen affords various lithium zincate species, the solid-state structures of which reveal a diversity of oxo-capture modes. Amine 1 reacts to give both dimeric THF [Li(Me)OZn[N(2-C5H4N)Ph]2] (6), wherein oxygen has inserted into the Zn-C bond of a [MeZn[N(2-C5H4N)-Ph]2] ion, and the trigonal Li2Zn complex, bis(OtBu)-capped (THF x Li)2-[[(mu3-O)tBu]2Zn[N(2-C5H4N)Ph]2] (7). The structural analogue of 6 (8) results from the employment of 2, while the use of more sterically congested 3 yields a pseudo-cubane dimer [(THF x [Li(tBu)OZn(OtBu)Me]]2] (9) notable for the retention of labile Zn-C(Me). Amines 4 and 5 afford the oxo-encapsulation products [mu4-O)Zn4[(2-C5H4N)-NBz]6] (10b), and [tBu(mu3-O)-Li3(mu6-O)Zn3[(2-C5H4N)NMe]6] (11), respectively, with concomitant oxo-insertion into a Li-C interaction resulting in capping of the fac-isomeric (mu6-O)M3M'3 distorted octahedral core of the latter complex by a tert-butoxide group.     

四羰基二(五甲二硅基环戊二烯基)二钼的合成及反应

本文进一步报道四羰基二(五甲二硅基环戊二烯基)二铜的合成及反应, 五甲二硅基环戊二烯与六羰基钼在甲苯中加热回流9h, 即生成含Mo-Mo键的双核钼配合物1, 1在甲苯中进一步加热回流, 则发生脱羰而生成标题化合物。     

Selective ring-opening reactions of

The reactivity of strained [1]ferrocenophanes, [Fe(eta-C5H4)2ERx] (ERx = SiMe2, 1a: SiMePh, 1b; SnR2, 1c), towards boron halides has been investigated and has been shown to provide a facile pathway to ferrocene derivatives functionalized with Lewis acidic boron centers. The boron halides RBX2 (R = Cl, Ph, fc; X = Cl, Br) (fc = Fe(eta-C5H4)2) lead to selective cleavage of the Si-Cp bonds in 1a and 1b to give, depending on the reaction stoichiometry, functionalized mono- or diferrocenylboranes RnB [(eta-C5H4)Fe(eta-C5H4SiMe2Cl)](3-n) (2a: R = Cl, n = 2; 2b: R = Cl, n = 1; 2c: R = Ph, n = 1) and RnB[(eta-C5H4)Fe(eta-C5H4SiMePhCl)](3-n) (2d: R = Cl, n = 2) in high yields. Compounds 2a-d were characterized by multinuclear NMR spectroscopy, mass spectrometry, and by single-crystal X-ray diffraction (for 2b). Most likely due to steric constraints, a triferrocenylborane was not obtained even from the reaction of BCl3 with an excess of 1a, whereas facile formation of the diferrocenylphenylborane 2c from PhBCl2 and two equivalents of 1a was observed. Selective hydrolysis of the B-Cl bonds of chlorodiferrocenylborane 2b in the presence of trace amounts of water led to the silylated tetranuclear ferrocene complex [(ClMe2Sifc)2B-O-B(fcSiMe2Cl)2] (3) without cleavage of the Si-Cl bonds. The structure of 3 was confirmed by an X-ray diffraction study. Studies of the reactivity of the higher Group 14 homologue of 1a and 1b, the tin-bridged [1]ferrocenophane 1c, revealed that facile addition of B-Cl bonds occurs across the Sn-Cp bonds to yield the 1-stannyl-1'-borylferrocenes [(ClMes2Sn)fc(BClR)] (4a: R = Cl; 4b: R = Ph; Mes = 2,4,6-Me3C6H2). The new synthetic methodology can be extended to bifunctional Lewis acids such as the bis(boryl)ferrocene 1,1'-fc(BBr2)2, which affords the linear boron-bridged ferrocene trimer 1,1'-[fc[B(Br)fcSiMe2Br]2] 5 in 54% isolated yield. In order to incorporate the functionalized ferrocenylboranes into polymer structures, compound 2c was reduced with Li[BEt3H] to give the silicon-hydride functionalized species [PhB[(eta-C5H4)Fe(eta-C5H4SiMe2H)]2] (6), which was then used as a capping reagent in the transition metal catalyzed polymerization of 1a. This process leads to the incorporation of the ferrocenylborane unit into the main chain of a poly(ferrocenylsilane) to afford [PhB-[(fcSiMe2)(n-1)fcSiMe2H]2] (7).