Novel and efficient bridged bis(N-heterocyclic carbene)palladium(II) catalysts for selective carbonylative Suzuki–Miyaura coupling reactions to biaryl ketones and biaryl diketones

Bridged N,N′-substituted bisbenzimidazolium bromide salts (L1, L2, and L3) were synthesized and fully characterized. Reactions of palladium acetate with L1, L2, and L3 afforded corresponding new bridged bis(N-heterocyclic carbene)palladium(II) complexes (C1, C2, and C3) in high yields. The X-ray structure of complex C1 showed that the Pd(II) ion is bonded to the two carbon atoms of the bis(N-heterocyclic carbene) and two bromido ligands are in the cis position, resulting in a distorted square planar geometry. The three Pd(NHC)₂Br₂ complexes C1, C2, and C3 were evaluated in carbonylative Suzuki–Miyaura coupling reactions of aryl boronic acids with aryl halides and displayed high catalytic activity with low catalyst loading. The coupling reactions of aryl bromides were selective towards the carbonylation product at higher carbon monoxide pressure.     

Palladium-catalyzed carbonylative coupling of benzyl chlorides with aryl boronic acids in aqueous media

A novel chemoselective protocol for the carbonylative Suzuki coupling of benzyl chlorides with aryl boronic acids at low pressure of carbon monoxide has been developed. Applying a commercially available palladium acetate/PCy₃ catalyst system in the presence of potassium phosphate as the base and water as the solvent the coupling reactions proceeded smoothly. To demonstrate the general applicability 12 different α-arylated acetophenones have been synthesized in moderate to good yields (41-78%) under mild conditions.     

Recyclable heterogeneous palladium-catalyzed carbonylative Sonogashira coupling under CO gas-free conditions

Abstract

A convenient, efficient and practical heterogeneous palladium-catalyzed carbonylative Sonogashira coupling of aryl iodides with terminal alkynes under CO gas-free conditions has been developed by using an MCM-41-supported bidentate phosphine palladium acetate complex as catalyst. Here, formic acid was used as the CO source with dicyclohexylcarbodiimide (DCC) as the activator and a wide variety of alkynyl ketones were generated in moderate to high yields. This heterogeneous palladium catalyst can be easily recovered via a simple filtration process and recycled up to 8 times without apparent loss of activity.     

Palladium bis(2,2,6,6‐tetramethyl‐3,5‐heptanedionate) catalyzed alkoxycarbonylation and aminocarbonylation reactions

Palladium bis(2,2,6,6‐tetramethyl‐3,5‐heptanedionate), a structurally well defined O‐containing transition metal complex, is reported to be an efficient catalyst for alkoxycarbonylation and aminocarbonylation reactions under milder operating conditions. The system tolerated the carbonylative coupling of various aryl halides with phenol/alcohol and amines, providing good to excellent yields of desired products under optimized reaction conditions. Copyright © 2009 John Wiley & Sons, Ltd.     

The thermoregulated ligand–palladium‐catalyzed carbonylative Sonogashira coupling of aryl iodides with terminal alkynes in water

The carbonylative Sonogashira coupling of aryl iodides with terminal alkynes was studied by using thermoregulated ligand–palladium as an efficient and reusable catalyst at 80 °C in water. The corresponding alkynone products were obtained in good to excellent yields under 1 atm of carbon monoxide. The isolation of the products was readily achieved by extraction with ethyl acetate, and the catalyst recovered in water can be reused and recycled up to four times without significant loss in catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

一种经MCM-41负载双齿膦钯(0)配合物催化的羰基化Suzuki偶联合成二芳酮的新途径

在催化量的MCM-41负载双齿膦钯(0)配合物存在下,芳基碘化物和芳基硼酸、一氧化碳在常压下能顺利进行羰基化Suzuki偶联反应,高产率地生成了各种二芳酮化合物。MCM-41负载双齿膦钯(0)配合物具有比PdCl2(PPh3)2 更高的活性和选择性,且可回收再用10次其活性基本不变,为各种功能化二芳酮的合成提供了方便实用的新途径。     

Palladium-Catalyzed Benzylic C(sp3)−H Carbonylative Arylation with Aryl Bromides

A novel, selective and high-yielding palladium-catalyzed carbonylative arylation of a variety of weakly acidic (pK_a 25–35 in DMSO) benzylic and heterobenzylic C(sp³)−H bonds with aryl bromides has been achieved. This system is applicable to a range of pro-nucleophiles for access to sterically and electronically diverse α-aryl or α,α-diaryl ketones, which are ubiquitous substructures in biologically active compounds. The Josiphos SL-J001-1-based palladium catalyst was identified as the most efficient and selective, enabling carbonylative arylation with aryl bromides under 1 atm CO to provide the ketone products without the formation of direct coupling byproducts. Additionally, (Josiphos)Pd(CO)₂ was identified as the catalyst resting state. A kinetic study suggests that the oxidative addition of aryl bromides is the turnover-limiting step. Key catalytic intermediates were also isolated.     

Facile Access to Sterically Hindered Aryl Ketones via Carbonylative Cross-Coupling: Application to the Total Synthesis of Luteolin

A general and mild protocol for achieving the carbonylative cross-coupling of sterically hindered, ortho-disubstituted aryl ketones is reported. The commercially available PEPPSI-IPr catalyst is shown to efficiently promote the carbonylative cross-coupling of hindered ortho-disubstituted aryl iodides to give diaryl ketones; traditional phosphine catalysts are less effective. Carbonylative Suzuki-Miyaura cross-couplings provide a diverse array of biaryl ketones in good to excellent yields. The same catalyst is also shown to catalyze a carbonylative Negishi cross-coupling reaction, utilizing a variety of alkynyl-zinc reagents to give the corresponding alkynyl aryl ketones. Application of this new methodology to the synthesis of the natural product luteolin is reported.     

Palladium‐catalyzed cyanation reaction of aryl halides using K4[Fe(CN)6] as non‐toxic source of cyanide under microwave irradiation

An efficient method for preparation of aryl nitriles—using [Pd{C₆H₂(CH₂CH₂ NH₂)‐(OMe)₂,3,4} (µ‐Br)]₂ complex as an efficient catalyst and K₄[Fe(CN)₆] as a green cyanide source—from aryl bromides, aryl iodides and aryl chlorides under microwave irradiation has been reported. This complex has been demonstrated to be an active and efficient catalyst for this reaction. Using a catalytic amount of this synthesized palladium complex in DMF at 130 °C led to production of the cyanoarenes in excellent yields in short reaction times. Copyright © 2010 John Wiley & Sons, Ltd.     

Pd(OAc)2-Catalyzed Carbonylative Coupling of Aryl Iodide with Ortho-Haloamines in Water

The carbonylative cross coupling of aryl iodide with ortho-haloaniline to ortho-haloanilide using phosphine-free Pd(OAc)₂ catalyst in water as a reaction medium has been studied. The present protocol facilitated the reaction of o-haloanilines with a wide variety of hindered and functionalized aryl iodides, affording good yields of the desired products. The protocol was also extended for the synthesis of benzoxazoles through cyclization of ortho-haloanilide using Cu(acac)₂ catalyst.     

Palladium-catalyzed sonogashira and hiyama reactions using phosphine-free hydrazone ligands

Palladium/copper-catalyzed Sonogashira cross-coupling reaction of aryl halides with a variety of terminal alkynes under amine-free conditions in dimethylformamide (DMF) at 80 degrees C gave internal arylated alkynes using PdCl2(MeCN)2 with phosphine-free hydrazone 2a as a ligand and CuI as the cocatalyst in good yields. We also found PdCl2/hydrazone ligand 1d in PhMe at 80 degrees C was a phosphine-free efficient catalyst system for a Hiyama cross-coupling reaction of aryl bromides with aryl(trialkoxy)silanes in good yields.     

Magnetically separable Pd catalyst for carbonylative Sonogashira coupling reactions for the synthesis of alpha,beta-alkynyl ketones

A magnetically separable palladium catalyst was simply synthesized through a wet impregnation incorporating palladium nanoparticles and superparamagnetic Fe3O4 nanoparticles in KBH4 solution, which is a highly efficient catalyst for the carbonylative Sonogashira coupling reaction of aryl iodides with terminal alkynes under phosphine-free conditions. This catalyst is completely magnetically recoverable due to the super paramagnetic behavior of Fe3O4 and can be reused with sustained selectivity and activity.     

Palladium-catalyzed formylation of aryl bromides: elucidation of the catalytic cycle of an industrially applied coupling reaction

The first comprehensive study of the catalytic cycle of the palladium-catalyzed formylation of aryl bromides with synthesis gas (CO/H2, 1:1) is presented. The formylation in the presence of efficient (Pd/PR2(n)Bu, R = 1-Ad, (t)Bu) and nonefficient (Pd/P(t)Bu3) catalysts was investigated. The main organometallic complexes involved in the catalytic cycle were synthesized and characterized, and their solution chemistry was studied in detail. Comparison of stoichiometric and catalytic reactions using P(1-Ad)2(n)Bu, the most efficient ligand known for the formylation of aryl halides, led to two pivotal results: (1) The corresponding carbonylpalladium(0) complex [Pd(n)(CO)(m)L(n)] and the respective hydrobromide complex [Pd(Br)(H)L2] are resting states of the active catalyst, and they are not directly involved in the catalytic cycle. These complexes maintain the concentration of most active [PdL] species at a low level throughout the reaction, making oxidative addition the rate-determining step, and provide high catalyst longevity. (2) The product-forming step proceeds via base-mediated hydrogenolysis of the corresponding acyl complex, e.g., [Pd(Br)(p-CF3C6H4CO){P(1-Ad)2(n)Bu}]2 (8), under mild conditions (25-50 degrees C, 5 bar). Stoichiometric studies using the less efficient Pd/P(t)Bu3 catalyst resulted in the isolation and characterization of the first stable three-coordinated neutral acylpalladium complex, [Pd(Br)(p-CF3C6H4CO)(P(t)Bu3)] (10). Hydrogenolysis of 10 needed significantly more drastic conditions compared to that of dimeric 8. In the presence of amine base, complex 10 gave a catalytically inactive diamino acyl complex, which explains the low activity of the Pd/P(t)Bu3 catalyst formylation of aryl bromides.     

A convenient and practical heterogeneous palladium‐catalyzed carbonylative Suzuki coupling of aryl iodides with formic acid as carbon monoxide source

A practical heterogeneous palladium‐catalyzed carbonylative Suzuki coupling of aryl iodides with arylboronic acids under carbon monoxide gas‐free conditions has been developed using a bidentate phosphino‐functionalized magnetic nanoparticle‐immobilized palladium(II) complex as catalyst. Formic acid was utilized as the carbon monoxide source with dicyclohexylcarbodiimide as the activator, and a wide variety of biaryl ketones were generated in moderate to high yields. The new heterogeneous palladium catalyst can be prepared via a simple procedure and can easily be separated from a reaction mixture by simply applying an external magnet and recycled up to 10 times without any loss of activity.     

[Pd(PPh3)2(saccharinate)2]—general catalyst for Suzuki–Miyaura,Negishi cross-coupling and C–H bond functionalization of coumaryl and pyrone substrates

The potential of complex [Pd(PPh₃)₂(saccharinate)₂] 1 in catalyzing Suzuki–Miyaura cross-coupling of 4-halo and 4-bromomethyl coumaryl and pyrone substrates with different aryl boronic acids has been explored. Excellent yields of the desired products are obtained in competitive reaction time and under relatively mild conditions. Negishi cross-coupling of 4-coumaryl tosylate with aryl and alkylzinc reagents has also been performed with good yields of the cross-coupled products obtained in most cases. Intra-molecular C–H bond functionalization of coumaryl ethers also furnished very high yields of synthetically attractive tetracyclic ring systems exhibiting the potential of 1 as a powerful catalyst in synthetically important reactions.     

Carbonylative cross-coupling reaction of ethynylstibane with aryl iodides

Palladium-catalyzed carbonylative cross-coupling reaction of ethynylstibane (PhSbPh(2)) and aryl iodides (Ar-I) is described. The reaction of the stibanes and the halides under 1 atm of carbon monoxide in N,N-dimethylacetamide using a combination of 5 mol% Pd(OAc)(2) and 4 equivalents (20 mol%) of PPh(3) brought about carbonylative cross-coupling reaction to afford arylethynylketones [ArC(O)Ph] in good yields along with a small amount of directly coupled products, aryl acetylens (ArPh). Formation of the side product was completely suppressed by conducting the reaction under high CO pressure (20 atm) conditions. The present method provides a variety of carbonylated products in good yield even with electron-deficient aryl iodides which usually give inferior results due to their tendency to undergo decarbonylation in the cross-coupling reaction of ethynylstibanes and acyl halides.     

One‐Pot,Three‐Component Condensation of Aldehydes, 2‐Naphthol and 1,3‐Dicarbonyl Compounds

A practical and efficient procedure for the one‐pot multicomponent couping of aryl aldehydes, 2‐naphthol and cyclic 1,3‐dicarbonyl compounds using perchloric acid adsorbed on silica gel (HClO₄‐SiO₂) as a highly efficient, inexpensive, convenient, reusable heterogeneous catalyst under solvent‐free conditions has been developed. Various biologically important 12‐aryl‐8,9,10,12‐tetrahydrobenzo[a]xanthen‐11‐one derivatives have been efficiently synthesized in high to excellent yields. The present approach offers several advantages such as shorter reaction times, simple work‐up, excellent yields, low cost, and mild reaction conditions. Furthermore, the catalyst can be recovered simply and reused without appreciable loss of its catalytic activity.     

Palladium-catalyzed carbonylative cyclization of unsaturated aryl iodides and dienyl triflates,iodides, and bromides to indanones and 2-cyclopentenones

Indanones and 2-cyclopentenones have been successfully prepared in good to excellent yields by the palladium-catalyzed carbonylative cyclization of unsaturated aryl iodides and dienyl triflates, iodides, and bromides, respectively. The best results are obtained by employing 10 mol % of Pd(OAc)(2), 2 equiv of pyridine, 1 equiv of n-Bu(4)NCl, 1 atm of CO, a reaction temperature of 100 degrees C, and DMF as the solvent. This carbonylative cyclization is particularly effective on substrates that contain a terminal olefin. The proposed mechanism for this annulation includes (1) Pd(OAc)(2) reduction to the active palladium(0) catalyst, (2) oxidative addition of the organic halide or triflate to Pd(0), (3) coordination and insertion of carbon monoxide to produce an acylpalladium intermediate, (4) acylpalladation of the neighboring carbon-carbon double bond, (5) reversible palladium beta-hydride elimination and re-addition to form a palladium enolate, and (6) protonation by H(2)O to produce the indanone or 2-cyclopentenone.     

An efficient Stille cross‐coupling reaction catalyzed by ortho‐palladated complex of tribenzylamine under microwave irradiation

The catalytic activity of [Pd{C₆H₄(CH₂N(CH₂Ph)₂)}(μ‐Br)]₂ complex as an efficient, stable and catalyst that is non‐sensitive to air and moisture was investigated in the Stille cross‐coupling reaction of various aryl halides with phenyltributyltins under microwave irradiation. The substituted biaryls were produced in excellent yield in short reaction times using a catalytic amount of this complex in DMF at 100 C. The combination of dimeric complex as homogeneous catalyst and microwave irradiation and also DMF as microwave‐active polar solvent gave higher yields in shorter reaction times. Copyright © 2011 John Wiley & Sons, Ltd.     

A novel and highly efficient polyaniline‐functionalized multiwall carbon nanotube‐supported cu(I) complex for Sonogashira coupling reactions of aryl halides with phenylacetylene

A polyaniline‐functionalized multiwall carbon nanotube‐supported Cu(I) complex was developed as an efficient catalyst for the Sonogashira reactions of aryl halides with phenylacetylene in the presence of potassium hydroxide in dimethylformamide at 135 °C under nitrogen atmosphere. The corresponding products were generated in good to excellent yields using this catalytic system. Moreover, the multiwall carbon nanotube‐supported Cu(I) catalyst was simply recycled and reused for six consecutive runs.