利用Kirkendall效应制备Ce1-xTixO2中空纳米球

利用Kirkendall效应, 在溶剂热条件下成功制备了复合氧化物Ce_1-xTi_xO₂的纳米空心球, 并通过XRD, TEM和XPS等测试手段进行了表征. 结果表明, Ce_1-xTi_xO₂纳米空心球的粒径为65 nm, 小于初始状态的CeO₂纳米球, 并且Ce_1-xTi_xO₂纳米空心球的结构与前驱体CeO₂晶体结构相同, 均为面心立方结构. Ti/Ce摩尔比和温度是影响产物形貌和结构的重要因素, 通过实验得出最佳反应条件为n(Ti)∶n(Ce)=8∶10, 于190 ℃反应8 h.     

Design of pyrite/carbon nanospheres as high-capacity cathode for lithium-ion batteries

Transition metal sulfides are emerging as promising electrode materials for energy storage and conversion. In this work, hierarchical FeS_2/C nanospheres are synthesized through a controllable solvothermal method followed by the annealing process. Spherical FeS_2 core is homogeneously coated by thin carbon shell. The hierarchical nanostructure and carbon coating can enhance electron transfer and accommodate the stress originated from the volume change as well as suppress the shuttle effect of polysulfide. Consequently, as the cathode material of lithium ion batteries(LIBs), the FeS_2/C nanospheres exhibit high reversible capacity of 676 m Ahg~(-1) and excellent cycling life with the capacity retention of 97.1% after100 cycles. In addition, even at the high current density of 1.8 C, a reversible capacity of 437 m Ahg~(-1) is obtained for the FeS_2/C nanospheres, demonstrating its great prospect for practical applications in highperformance LIBs.     

Synthesis of hollow CaCO3 nanospheres templated by micelles of poly(styrene-b-acrylic acid-b-ethylene glycol) in aqueous solutions

An asymmetric triblock copolymer, poly(styrene-b-acrylic acid-b-ethylene glycol) (PS-b-PAA-b-PEG), was synthesized via reversible addition-fragmentation chain transfer controlled radical polymerization. Micelles of PS-b-PAA-b-PEG with PS core, PAA shell, and PEG corona were then prepared in aqueous solutions, followed by extensive characterization based on dynamic light scattering, zeta-potential, and transmission electron microscopy (TEM) measurements. The well-characterized micelles were used to fabricate hollow nanospheres of CaCO(3) as a template. It was elucidated from TEM measurements that the hollow nanospheres have a uniform size with cavity diameters of ca. 20 nm. The X-ray diffraction analysis revealed a high purity and crystallinity of the hollow nanospheres. The hollow CaCO(3) nanospheres thus obtained have been used for the controlled release of an anti-inflammatory drug, naproxen. The significance of this study is that we have overcome a previous difficulty in the synthesis of hollow CaCO(3) nanospheres. After mixing of Ca(2+) and CO(3)(2-) ions, the growth of CaCO(3) is generally quite rapid to induce large crystal, which prevented us from obtaining hollow CaCO(3) nanospheres with controlled structure. However, we could solve this issue by using micelles of PS-b-PAA-b-PEG as a template. The PS core acts as a template that can be removed to form a cavity of hollow CaCO(3) nanospheres, the PAA shell is beneficial for arresting Ca(2+) ions to produce CaCO(3), and the PEG corona stabilizes the CaCO(3)/micelle nanocomposite to prevent secondary aggregate formation.     

Improved protein-adsorption resistance of polyethersulfone membranes via surface segregation of ultrahigh molecular weight poly(styrene-alt-maleic anhydride)

A styrene-maleic anhydride (SMA) alternating copolymer with ultrahigh molecular weight (M_w > 10⁶) synthesized in super critical carbon dioxide (SC CO₂) medium was used as hydrophilic polymeric additive in the preparation of polyethersulfone (PES) membranes. The PES/SMA blend membranes were prepared by immersion precipitation process. X-ray photoelectronic spectroscopy (XPS) measurements confirmed that the hydrolyzed SMA preferentially segregated to membrane–coagulant interface during membrane formation. For the PES/SMA blend membranes, no big change was observed in the cross-sectional structure and the mechanical properties were well maintained after SMA addition except that a thicker top layer was formed. The surface morphology analysis by atomic force microscopy (AFM) showed that the membrane surface roughness increased with the added SMA amount. The results of water contact angle, water absorbance measurements and static protein adsorption experiments revealed that the surface enrichment of SMA endowed PES/SMA blend membranes with significantly improved surface hydrophilicity and protein-adsorption resistance.     

Preparation of albumin—PAA nanocapsules and their controlled release behavior for drugs

New kinds of narrowly distributed protein‐based nanoparticles, bovine serum albumin‐Poly (acrylic acid) (BSA/PAA) nanospheres, and nanocapsules were prepared via in situ polymerization, swelling, and re‐aggregation. The structure and morphology of the nanospheres were characterized by UV‐Vis, FT‐IR, DLS, and TEM. The stability of the BSA/PAA nanospheres and nanocapsules was increased when their skeletons were fixed by cross‐linked agents. The nanospheres carried a positive charge and their size was about 80–110 nm. The protein‐based nanocapsules were stimuli‐responsive with pH value and their hydrodynamic diameter varied from 70 to 230 nm with changes of pH. In vitro release experiments of Rhodamine B and Doxorubicin hydrochloride showed that these biopolymer nanoparticles provided a controlled release of the entrapped drugs for 300 hr. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of titania embedded silica hollow nanospheres via sonication mediated etching and re-deposition

Titania embedded silica hollow nanospheres were synthesized from sonication-mediated etching and re-deposition of silica/titania core/shell nanospheres. The designed structure of the hollow nanospheres was proved to be a key factor for the charge trapping/detrapping and resulting bistability in non-volatile organic bistable memory devices (OBDs).     

One-step advanced preparation of surface-functional peptide nanospheres by the polymerization of L-phenylalanine N-carboxyanhydride with dual initiators

Surface-grafted peptide nanospheres consisting of hydrophobic poly(L-phenylalanine) with hydrophilic poly(ethylene glycol) (PEG) grafts were successfully prepared by the one-step polymerization of L-phenylalanine N-carboxyanhydride with the dual initiators of hydrophobic n-butylamine and hydrophilic NH2-monoterminated PEG (NH2-PEG). The monodispersed peptide nanospheres were stably self-assembled during polymerization in a mixture of water/dimethyl sulfoxide to create a colloidal solution, but only aggregated in water or organic solvents. When n-butylamine or NH2-PEG was used as a solitary initiator, the peptide nanospheres were not formed. The peptide nanospheres showed high dispersion-stability in water, and their diameter was approximately 300 nm. Furthermore, the peptide nanospheres were well-redispersed in water, retaining the same diameter and monodispersity even after lyophilization. Peptide nanospheres with the functional carboxylic acid on their graft layer were also successfully prepared by the one-step preparation method. This one-step preparation method of surface-grafted peptide nanospheres will be useful as an advanced technology to develop biodegradable functional nanospheres.     

Study of the hydrostatic pressure dependence of the Raman spectrum of single-walled carbon nanotubes and nanospheres

We have investigated the behavior of single-walled carbon nanotubes and nanospheres (C(60)) under high hydrostatic pressure using Raman spectroscopy over the pressure range 0.2-10 GPa using a diamond anvil cell. Different liquid mixtures were used as pressure transmission fluids (PTF). Comparing the pressure dependence of the Raman peak positions for the nanotubes and the nanospheres in different PTF leads to the observation of a number of new phenomena. The observed shift in Raman peak position of both radial and tangential modes as a function of applied pressure and their dependence on the PTF chemical composition can be rationalized in terms of adsorption of molecular species from the of PTF on to the surface of the carbon nanotubes and/or nanospheres. The peak shifts are fully reversible and take place at a comparatively modest pressure (2-3 GPa) that is far below pressures that might be required to collapse the nanoparticles. Surface adsorption of molecular species on the nanotube or nanospheres provides a far more plausible rational for the observed phenomena than ideas based on the notion of tube collapse that have been put forward in the recent literature.     

Superhydrophobic and Conductive Wire Membrane for Enhanced CO2 Electroreduction to Multicarbon Products

Gas-liquid-solid triple-phase interfaces (TPI) are essential for promoting electrochemical CO₂ reduction, but it remains challenging to maximize their efficiency while integrating other desirable properties conducive to electrocatalysis. Herein, we report the elaborate design and fabrication of a superhydrophobic, conductive, and hierarchical wire membrane in which core–shell CuO nanospheres, carbon nanotubes (CNT), and polytetrafluoroethylene (PTFE) are integrated into a wire structure (designated as CuO/F/C(w); F, PTFE; C, CNT; w, wire) to maximize their respective functions. The realized architecture allows almost all CuO nanospheres to be exposed with effective TPI and good contact to conductive CNT, thus increasing the local CO₂ concentration on the CuO surface and enabling fast electron/mass transfer. As a result, the CuO/F/C(w) membrane attains a Faradaic efficiency of 56.8 % and a partial current density of 68.9 mA cm⁻² for multicarbon products at −1.4 V (versus the reversible hydrogen electrode) in the H-type cell, far exceeding 10.1 % and 13.4 mA cm⁻² for bare CuO.     

Porous Core–Shell CuCo2S4 Nanospheres as Anode Material for Enhanced Lithium-Ion Batteries

Porous core–shell CuCo₂S₄ nanospheres that exhibit a large specific surface area, sufficient inner space, and a nanoporous shell were synthesized through a facile solvothermal method. The diameter of the core–shell CuCo₂S₄ nanospheres is approximately 800 nm„ the radius of the core is about 265 nm and the thickness of the shell are approximately 45 nm, respectively. On the basis of the experimental results, the formation mechanism of the core–shell structure is also discussed. These CuCo₂S₄ nanospheres show excellent Li storage performance when used as anode material for lithium-ion batteries. This material delivers high reversible capacity of 773.7 mA h g⁻¹ after 1000 cycles at a current density of 1 A g⁻¹ and displays a stable capacity of 358.4 mA h g⁻¹ after 1000 cycles even at a higher current density of 10 A g⁻¹. The excellent Li storage performance, in terms of high reversible capacity, cycling performance, and rate capability, can be attributed to the synergistic effects of both the core and shell during Li⁺ ion insertion/extraction processes.     

The synthesis of ZnS hollow nanospheres with nanoporous shell

ZnS hollow nanospheres with nanoporous shell were successfully synthesized through the evolvement of ZnO nanospheres which were synthesized by hydrothermal method with poly (sodium-p-styrene sulfonate) (PSS) as surfactant at low temperature. The as-synthesized samples were characterized with X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), UV/vis spectrum and N₂ adsorption. The results showed that the shell of as-synthesized ZnS hollow structure was composed of many fine crystallites and had a nanoporous structure with pore diameter about 4 nm demonstrated by N₂ adsorption/desorption isotherm. The sample possessed efficiency of photocatalytic degradation on X-containing (X=Cl, Br, I) organic pollutants.     

Porous carbon nanospheres with moderately oriented domains for EDLC electrode

Porous carbon nanospheres with moderately oriented microcrystalline structures were prepared via a relatively simple synthetic route in this article. CTAB acted as a structure‐directing agent to induce small sulfonated pitch (SP) pieces to assemble orderly. By this means, the formation of carbon nanospheres was simultaneous with the moderate orientation of carbon microcrystalline without additional process. Owing to the moderately oriented microcrystalline structures, the resultant sample CNS3 possessed a high e‐conductivity of 62.5 S/m. When used as an electrode material for EDLCs, it showed excellent electrochemical properties even without any conductive agent. In an organic electrolyte, the resultant sample CNS3 possessed a high specific capacitance of 155 F/g at 20 A/g and outstanding cycle life with 94.2% capacity retention after 10,000 cycles. This work puts forward a novel design for carbon nanospheres with moderately oriented domains by a simple and energy‐efficient means.     

Fe3O4/Polypyrrole/Au nanocomposites with core/shell/shell structure: synthesis, characterization, and their electrochemical properties

Uniform Fe3O4 nanospheres with a diameter of 100 nm were rapidly prepared using a microwave solvothermal method. Then Fe304/polypyrrole (PPy) composite nanospheres with well-defined core/shell structures were obtained through chemical oxidative polymerization of pyrrole in the presence of Fe3O4; the average thickness of the coating shell was about 25 nm. Furthermore, by means of electrostatic interactions, plentiful gold nanoparticles with a diameter of 15 nm were assembled on the surface of Fe3O4/PPy to get Fe3O4/PPy/Au core/shell/shell structure. The morphology, structure, and composition of the products were characterized by transmission electronic microscopy (TEM), scanning electronic microscopy (SEM), X-ray powder diffraction (XRD), and Fourier transform infrared (FT-IR) spectroscopy. The resultant nanocomposites not only have the magnetism of Fe3O4 nanoparticles that make the nanocomposites easily controlled by an external magnetic field but also have the good conductivity and excellent electrochemical and catalytic properties of PPy and Au nanoparticles. Furthermore, the nanocomposites showed excellent electrocatalytic activities to biospecies such as ascorbic acid (AA).     

Adsorption of bovine alpha-lactalbumin on suspended solid nanospheres and its subsequent displacement studied by NMR spectroscopy

Detailed knowledge of the adsorption-induced conformational changes of proteins is essential to understand the process of protein adsorption. However, not much information about these conformational changes is available. Here, the adsorption of calcium-depleted (APO)- and calcium-containing (HOLO)-bovine alpha-lactalbumin (BLA) on suspended solid polystyrene nanospheres and their subsequent displacement by a surfactant are studied by NMR spectroscopy. To our knowledge, this is the first time that adsorption of proteins on solid nanospheres, with both components present in the NMR sample, is studied by this method. High-quality one-dimensional and two-dimensional 1H NMR spectra of nonadsorbed APO- and HOLO-BLA in the presence of BLA- and/or surfactant-covered solid polystyrene nanospheres in suspension are obtained using standard NMR procedures. BLA and surfactant molecules that are adsorbed on the polystyrene nanospheres give rise to extremely broadened proton resonances. This can be exploited to determine the amount of adsorbed protein and of adsorbed surfactant in a system containing protein, nanospheres, and surfactant, without disturbing the equilibrium of the system. Two-dimensional 1H NMR spectroscopy shows that the chemical shifts of the backbone amide protons of HOLO-BLA after its adsorption and subsequent displacement from polystyrene nanospheres by the surfactant 3-[(3-cholamidopropyl)-dimethylammonio]-1-propanesulfonate (CHAPS) are identical to those of native HOLO-BLA. The adsorption-induced unfolding of BLA to a molten globule state on polystyrene nanospheres is thus fully reversible at the residue level upon CHAPS-induced displacement of BLA. The latter is the now fulfilled essential requirement that enables the future indirect study, at the residue level, of the conformational characteristics of BLA adsorbed on polystyrene nanospheres by hydrogen/deuterium exchange and NMR spectroscopy. The results presented show that NMR spectroscopy is clearly feasible to study the adsorption of BLA on suspended polystyrene nanospheres. This technique should be applicable to the study of the adsorption of other proteins on other surfaces as well.     

PMMA纳米球的制备及其银膜包覆技术

采用无皂乳液聚合法制备了单分散、直径为170 nm左右的聚甲基丙烯酸甲酯(PMMA)纳米球, 然后利用3-甲基丙烯酰氧基丙基三甲氧基硅烷(MATS)和3-巯丙基三甲氧基硅烷(MPTMS)对PMMA纳米球进行表面改性, 在其表面包覆一层均匀的巯基, 通过巯基与银离子之间的相互作用, 使银在PMMA纳米球表面成核长大, 从而合成PMMA/Ag纳米球壳粒子. 通过扫描电子显微镜、投射电子显微镜和紫外-可见吸收光谱测试技术对产物性能进行了表征, 研究结果表明, 制备的PMMA/Ag纳米球壳粒子的分散性好、包覆均匀.     

New approaches to stimuli-responsive polymeric micelles and hollow spheres

This article briefly describes some new approaches to stimuli-sensitive polymeric micelles and hollow spheres, which were developed in the authors’ laboratory in recent years. (1) Self-assembly of component polymers to non-covalently connected micelles (NCCM) driven by specific interactions. For example, in water, PCL and PAA formed core-shell nanospheres due to interpolymer hydrogen bonding. After crosslinking the PAA shell and removing the PCL core, “nanocages” made of PAA network were obtained. This hollow structure shows perfect reversible size-pH dependence. (2) Simultaneous in-situ polymerization of monomers and self-assembly of the polymers. In this approach, PNIPAM network was formed by radical polymerization covering PCL particles. Hollow spheres of PNIPAM network were then obtained by biodegradation of the PCL core. Both the core-shell spheres and hollow spheres show reversible size dependence on temperature change because of the phase transition of PNIPAM around 32°C. (3) Complexation-induced micellization and transition between the micelles and hollow spheres. Graft copolymers of hydroxylethyl cellulose (HEC) and PAA were prepared by free radical polymerization. The copolymers showed pH dependent micellization, i.e., micelles formed when pH of the graft copolymer solution decreased to around 3. The micellar structure could be locked by crosslinking the PAA grafts. The resultant cross-linked micelles undergo pH-dependent transition between the micelles and hollow spheres, which accompanies a remarkable particle size change. Both the micellization and the structure transition were found to be reversible and associated with H-bonding complexation between the main chain and grafts. __________ Translated from Acta Polymerica Sinica, 2005, 650(5) (in Chinese)     

In vivo NIR imaging with CdTe/CdSe quantum dots entrapped in PLGA nanospheres

Luminescent near-infrared (NIR) CdTe/CdSe QDs were synthesized and encapsulated in poly(lactic-co-glycolic acid) (PLGA) nanospheres to prepare stable and biocompatible QDs-loaded nanospheres for in vivo imaging. QDs were encapsulated with PLGA nanospheres by a solid dispersion method and optimized to have high fluorescence intensity for in vivo imaging detection. The resultant QDs-loaded PLGA nanospheres were characterized by various analytical techniques such as UV-Vis measurement, dynamic light scattering (DLS), fluorescence spectroscopy, and transmission electron microscopy (TEM). Finally, we evaluated toxicity and body distribution of QDs loaded in PLGA nanospheres in vitro and in vivo, respectively. From the results, the QDs loaded in PLGA nanospheres were spherical and showed a diameter range of 135.0-162.3 nm in size. The QD nanospheres increased their stability against photooxidation and photobleaching, which have the high potential for applications in biomedical imaging. We have also attained non-invasive in vivo imaging with light photons, representing an intriguing avenue for obtaining biological information by the use of NIR light.     

Development of high magnetization Fe3O4/polystyrene/silica nanospheres via combined miniemulsion/emulsion polymerization

Monodispersed, hydrophilic, superparamagnetic magnetic nanospheres with a high fraction of magnetite were synthesized by combining modified miniemulsion/emulsion polymerization and sol-gel technique for the first time. The surface of the nanospheres was coated by a silica layer with controlled thickness. Transmission electron microscopy experimental results showed well-proportioned, equal-sized, magnetite/polystyrene (Fe3O4/PS) nanospheres with a thin silica shell. Based on the TGA data, the fraction of magnetite in the Fe3O4/PS nanospheres core was estimated to be 80 wt %. Magnetization measurements indicated that the superparamagnetic nature of the nanospheres had high saturation magnetization of 40 emu/g at 300 K. The procedures of the novel synthesis are described in detail. Also discussed are the mechanisms of the novel combined miniemulsion/emulsion polymerization processes.     

PS/TiO2复合纳米微球的制备和结构表征

无机纳米微粒具有特殊的物理化学性能 ,近年来在摩擦学领域中受到越来越多的重视 .由于无机纳米微粒难以分散于润滑基础油中 ,故其作为润滑材料主要用作聚合物填料和润滑脂添加剂 .为了改善其在基础油中的分散性 ,需要对无机纳米微粒进行表面改性 ,制备成有机无机复合纳米微粒 ,从而使它们能够用作润滑油添加剂 .目前有机小分子表面修饰无机纳米微粒的摩擦学性能已有报导 [1－ 3],但是聚合物修饰无机纳米微粒的研究较少 ,并且大多是采用高分子（如 PVK,PVA等）直接包埋的方法 ,用这种方法制得的微粒 ,粒径差别较大,性能不太稳定 .　　本…     

Synthesis of poly[2-(perfluorooctyl)ethyl acrylate-<Emphasis Type="Italic">co</Emphasis>-poly(ethylene glycol) methacrylate] and its control of enzyme activity in supercritical carbon dioxide

Poly[2-(perfluorooctyl)ethyl acrylate-co-poly(ethylene glycol) methacrylate], P(POA-co-PEGm) was prepared as a new surfactant for scCO₂. The random copolymer was obtained by the radical polymerization of 2-(perfluorooctyl)ethyl acrylate (POA) and poly(ethylene glycol) methacrylate (PEGm) in DMF. The molar ratio of the POA and PEGm units in the copolymer was POA/PEGm = 0.972/0.028 by ¹H NMR. The molecular weight and molecular weight distribution were estimated by size exclusion chromatography to be Mn = 133,000 and Mw/Mn = 8.25, respectively. It was suggested that the copolymer formed micellar aggregates with the cores of the PEGm chains in scCO₂, based on the analyses of the copolymer in hexafluorobenzene by ¹H NMR and dynamic light scattering. The copolymer was soluble in scCO₂ and had a cloud point at a much higher pressure than the critical pressure. It was found that the copolymer solubilized CO₂-insoluble proteins such as bovine serum albumin and subtilisin Carlsberg in scCO₂. The solubility of the copolymer was not influenced by the presence of the proteins; however, the solubility decreased in the presence of a small amount of water along with the protein. The activity of the subtilisin slightly decreased when only placed in scCO₂, whereas a marked decrease in the activity was observed for the subtilisin in the presence of the copolymer in scCO₂. The subtilisin activity decreased as the CO₂ pressure increased.