单侧外部驱动弯张换能器

本文设计、制作了一种单侧外部驱动的弯张换能器，并利用有限元分析软件ANSYS构建了有限元模型，对换能器的电声参数进行了预测，计算结果与实验结果吻合较好。实验测得换能器的最大发射电压响应级为142dB，如果将发射电压加到1200V，换能器的最大声源级预计可达203dB。     

光纤法布里-珀罗复合结构折射率传感器的灵敏度分析

理论上推导了光纤法布里-珀罗复合结构传感器的反射光谱条纹对比度与外界介质折射率的关系,并分析了实验参数对传感器灵敏度的影响.利用化学腐蚀渐变折射率多模光纤制作了光纤法布里-珀罗复合结构折射率传感器,空气中的条纹对比度可达30 dB以上,折射率测量的灵敏度达45 dB/RIU(refraction index unit,简RIU)以上.实验结果与理论符合很好.通过理论和实验分析,提出了进一步提高传感器灵敏度的方法. 关键词： 光纤传感器 法布里-珀罗复合结构 折射率测量 灵敏度     

缠绕式光纤扭角传感的实验研究

利用多模光纤的微弯特性,提出并实现了一种新颖的缠绕式光纤扭角传感装置,其扭角测量范围大于90°.给出了该装置的基本实验原理.研究表明多模光纤的微弯损耗对扭角变化响应非常灵敏,其灵敏度可达1dB/1°.并且实验与理论符合得很好.     

南海北部海域内波环境下声传播损失起伏统计特性

浅海内波会引起声传播能量随时间的起伏变化,进而影响水声设备的工作性能.本文利用2015年南海北部一次浅海声场起伏实验数据,对比分析了浅海线性内波和孤立子内波条件下的声传播损失统计特性.在孤立子内波条件下,声传播损失起伏明显加剧,可达11 dB,且分布明显展宽,相对于线性内波的环境,声传播损失起伏可增加5 dB.从简正波...     

东印度洋海域风和降雨对环境噪声的影响

海面风和降雨对海洋环境噪声影响显著,利用海洋环境噪声模型结合风速和降雨率参数可对环境噪声谱级进行预报.本文研究了东印度洋海域环境噪声特性,分析了海面风速和降雨率对海洋环境噪声的影响规律,结果表明没有降雨时高频段噪声谱级与风速的相关系数可达0.59,存在降雨时高频段噪声谱级和降雨率的相关系数可达0.85,强降雨可使高频段环境噪声谱级增大6 dB以上.同时修正了风生噪声源级公式使其适用于东印度洋深海环境,修正后模型预报强降雨噪声谱级与实验数据整体误差在2 dB以内.利用小范围降雨噪声数据对模型进行验证时发现,在小范围降雨时噪声源模型采用海面非均匀降雨噪声源,比采用均匀噪声源的计算结果更加准确.修正后的风生及降雨噪声模型对东印度洋海洋环境噪声特性预报具有重要意义.     

S弯曲聚合物热光型可变衰减器的特性

提出一种热光聚合物可变光衰减器(VOA)的设计分析,利用S弯曲的波导提高衰减效率,BPM法模拟中验证其衰减动态范围可达60 dB,实现60 dB的衰减计算功耗为60 mW,附加弯曲损耗小于0.3 dB.并且具有很好的极化独立性,串扰低,尺寸小,易于集成.     

力曲线重构实验课程平台

原子力显微镜(AFM)作为一种分辨率可达原子量级的测量工具已经广泛应用于纳米材料、生物医学等领域.目前大学里开设与AFM成像技术相关的实验课程中,大多是向学生展示AFM扫描样品获得形貌图的功能,较为单调,无法使学生在实验课程中更深入地了解AFM的工作模式及成像方式.近年来,通过对原子力显微镜的输出信号进行分析,并利用高次谐波信号进行重建力曲线,使探测样品表面力学信息的方法得到了深入的研究.本文完整地叙述了使用自主开发的AFM实验平台进行重构力曲线的过程,并将其应用于AFM实验课程中,从而加深学生对AFM成像原理的了解.     

基于半导体光放大器交叉偏振调制效应实现正、反相波长变换

利用琼斯矩阵,对基于半导体光放大器中的交叉偏振调制效应实现全光波长变换进行了理论分析.结果表明,利用这种机制可以实现同相与反相波长变换.在实验上同时实现了10Gb/s归零信号的正相与反相波长变换,输出消光比分别达到了6.9 dB和8.1 dB.     

保偏光纤偏振特性自动测试系统的研制与开发

介绍了保偏光纤偏振特性的基本测试原理,给出了高精度检偏系统的光路结构,硬件检测电路和分析软件的结构框图,并对实验结果进行了精度分析。实验表明:光功率测试范围可达0 2nW—2mW,测得2m长保偏光纤最大消光比47 2dB,对于40dB以下的偏振态测量,误差优于±0 1dB。     

主动照明强度相干成像散斑效应仿真及实验研究

简述了强度相干成像原理,分析了照明激光散斑效应,并仿真了散斑效应对频谱模值的影响,利用数字微镜阵列设计实验,根据自适应望远镜测得的波前数据设置数字微镜阵列翻转状态,对不同目标采集光强涨落信息,利用基于先验信息的迭代算法进行图像恢复.结果表明:目标散斑光场强度涨落服从负指数分布;散斑光场使得目标频谱模值高频部分出现误差;利用基于先验信息的迭代算法能较好地恢复目标图像,目标恢复图像峰值信噪比最高可达29.87dB.     

Comodulation masking release and the masking-level difference

An experiment was performed to determine if the mechanism that mediates comodulation masking release (CMR) is associated with that used to improve detection by the masking-level difference (MLD). The experiment consisted of first improving detectability of a masked diotic tone burst by adding a synchronous noise band at another frequency region (CMR), and then measuring an MLD in the usual manner, by inverting the tone-burst signal to one ear. Results indicate that a substantial MLD can be measured for a signal whose detectability has already been improved by CMR. However, that MLD (9 dB) is smaller than that measured in random noise (14 dB). Put another way, a small CMR (4 dB) can be produced even when the detectability of a stimulus has already been improved due to the MLD. These data are in general agreement with those of Hall et al. [J. Acoust. Soc. Am. 83, 1839-1845 (1988)] and Schooneveldt and Moore [J. Acoust. Soc. Am. 85, 262-272 (1989)].     

含预反馈的激光自混合干涉型位移测量结构

提出了含预反馈的激光自混合干涉型位移测量结构，建立了系统模型，经理论分析和实验验证，结果表明，该结构具有提高温度量程，提高测量信号信噪比及获得粗糙表面的锯齿干涉信号等特点。     

基于光纤光栅外腔激光器的全光波长转换器的阈值转换特性

使用半导体激活介质的增益饱和效应,描述了激光器型全光波长转换器波长转换机制及其阈值转换特性.实验研究了基于光纤光栅外腔半导体激光器的全光波长转换器的阈值转换特性,结果表明以此器件作为波长转换器可以将信号的消光比由5dB提高到30dB,并可将信号的强度起伏抑制到0dB,可实现部分信号数字再生功能.     

High gain L-band erbium-doped fiber amplifier with two-stage double-pass configuration

An experiment on gain enhancement in the long wavelength band erbium-doped fiber amplifier (L-band EDFA) is demonstrated using dual forward pumping scheme in double-pass system. Compared to a single-stage single-pass scheme, the small signal gain for 1580 nm signal can be improved by 13.5 dB. However, a noise figure penalty of 2.9 dB was obtained due to the backward C-band ASE from second stage and the already amplified signal from the first pass that extracting energy from the forward C-band ASE. The maximum gain improvement of 13.7 dB was obtained at a signal wavelength of 1588 nm while signal and total pump powers were fixed at -30 dBm and 92 mW, respectively.     

基于自适应随机共振理论的太赫兹雷达信号检测方法

太赫兹雷达系统在差频信号频谱分析过程中,干扰噪声影响其测距能力.针对上述问题,提出基于自适应随机共振理论的太赫兹雷达信号检测方法,通过对含噪差频信号进行二次采样,利用自适应随机共振系统提取信号,进行尺度恢复完成测距计算.实验数据显示,不同测量距离时,相较于快速傅里叶变换法,输出信噪比的平均增益为9.684 d B,其中测量距离为1000 mm处,差频信号初始频谱值提高了64.1倍,系统信噪比增益为11.761 d B;相较于滤波法,在测量距离为1000 mm处信噪比增益最大,提高了70.56%;输入噪声强度为1—5 V之间时,输出信噪比曲线的曲率相对于滤波法降低了86.5%,其中噪声强度为5 V时信噪比增益最大,为14.018 d B.实验表明太赫兹雷达系统的测距能力大幅提高.     

In vivo ultrasonic attenuation slope estimates for detecting cervical ripening in rats: Preliminary results

To effectively postpone preterm birth, cervical ripening needs to be detected and delayed. As the cervix ripens, the spacing between the collagen fibers increases and fills with water, hyaluronan, decorin, and enzymes suggesting that the ultrasonic attenuation of the cervix should decrease. The decrease in ultrasonic attenuation may be detectable, leading to an effective means of detecting cervical ripening. Herein, the traditional attenuation slope-estimation algorithm based on measuring the downshift in center frequency of the ultrasonic backscattered signal with propagation depth was modified and applied to the cervix of rats. The modified algorithm was verified using computer simulations and an ex vivo tissue sample before being evaluated in in vivo animal studies. Spherically-focused f/3 transducers with 33-MHz center frequencies and with 9-mm focal lengths were used in both the simulations and experiments. The accuracy was better than 15% in the simulations, and the attenuation slope of the cervix in the ex vivo experiment was 2.6+/-0.6 dB/cm-MHz, which is comparable to 2.5+/-0.4 dB/cm-MHz measured using a through-transmission insertion loss technique. For the in vivo experiments, a statistically significant effect of ultrasonic attenuation with gestational age was not observed. The large variances in the in vivo results were most likely due to the natural variation in attenuation for biological tissue between animals.     

用极点方法识别水下目标

本文中研究一种水下目标识别方法并介绍一组材料、大小、厚度不同的中空圆柱形水下目标的识别实验。我们分三步提取水下目标特征量。第一步是在频域上用短脉冲作为入射信号辨识脉冲响应函数。第二步用“卷积-修正递推最小二乘”法估计目标ARMA模型参数。第三步计算频域上的极点。我们用极点作为水下目标的特征量,并认为它是一个不变量。计算机模拟结果表明,同以AR参数作为特征量的方法相比较,极点法的抗噪声干扰能力改善12dB。我们采用匹配滤波分类器对水下目标进行分类。实验结果表明,在无噪声情况下,正确识别率可达100％。信噪比 关键词：     

干涉型光纤水听器相位载波调制-解调中信号混叠产生的机理及解决方案

信号混叠是制约基于相位载波调制-解调的光纤水听器系统走向应用的一个关键问题。对信号混叠产生的机理进行了详细的理论分析和仿真,结果表明,提高光源调制频率和降低探头灵敏度都无法有效解决光纤水听器实际应用中遇到的高频干扰引起的混叠问题。基于声学滤波器原理,提出了一种新颖的声低通滤波解决方案。设计并加工制作了一种简单的声低通滤波光纤水听器,在驻波罐中对其声压灵敏度频响进行了测量。实验结果表明,该光纤水听器在测量频带上具有较好的声低通滤波特性,低频声压灵敏度约为-140 dB(0 dB=1 rad/μPa),高频衰减大于20 dB,对高频干扰有较强的抑制能力。该方案十分简单经济,能从根本上有效地解决相位载波调制-解调中的信号混叠问题。     

Spectral and level effects in noise-on-tone suppression

The effective internal level of a 1-kHz tone at 50 dB SPL was estimated by measuring the forward masking produced on a 10-ms signal tone of the same frequency. Noise containing a spectral notch was then added to the masker tone, and its influence on the effective level of the tone was measured with a variety of noise levels, notch widths, and notch shapes. In experiment 1, the masker tone was centered in the spectral notch, itself centered in a 2-kHz band of noise. As the spectrum level in the noise passbands increased from 6 dB/Hz to 36 dB/Hz, signal threshold decreased, indicating a decrease in masking by the masker tone. This "unmasking" effect of the noise was attributed to suppression of the masker tone by the components in the noise. Unmasking was greatest with the narrowest spectral notch (250 Hz), and decreased to zero as the notch widened to 1500 Hz. Compared to its level when presented alone, the effective internal level of the masker tone could be reduced by up to 30 dB (250-Hz notch, 36 dB/Hz). The relative suppressive strength of individual noise components was estimated in experiment 2, in which the 1-kHz masker tone was located at one edge of a spectral notch, rather than in the center. Noise spectrum level was fixed at 16 dB/Hz. As notch width decreased to zero, on either the high-frequency or low-frequency side of the masker tone, its effective internal level was again reduced by approximately 30 dB. In a tentative analysis, the first derivative of the smoothed threshold function was taken, to provide an estimate of the relative contributions to suppression at 1 kHz of noise components between 250 and 1740 Hz.(ABSTRACT TRUNCATED AT 250 WORDS)     

Effect of masker level on overshoot

Overshoot refers to the phenomenon where signal detectability improves for a short-duration signal as the onset of that signal is delayed relative to the onset of a longer duration masker. A popular explanation for overshoot is that it reflects short-term adaptation in auditory-nerve fibers. In this study, overshoot was measured for a 10-ms, 4-kHz signal masked by a broadband noise. In the first experiment, masker duration was 400 ms and signal onset delay was 1 or 195 ms; masker spectrum level ranged from - 10-50 dB SPL. Overshoot was negligible at the lowest masker levels, grew to about 10-15 dB at the moderate masker levels, but declined and approached 0 dB at the highest masker levels. In the second experiment, the masker duration was reduced to 100 ms, and the signal was presented with a delay of 1 or 70 ms; masker spectrum level was 10, 30, or 50 dB SPL. Overshoot was about 10 dB for the two lower masker levels, but about 0 dB at the highest masker level. The results from the second experiment suggest that the decline in overshoot at high masker levels is probably not due to auditory fatigue. It is suggested, instead, that the decline may be attributable to the neural response at high levels being dominated by those auditory-nerve fibers that do not exhibit short-term adaptation (i.e., those with low spontaneous rates and high thresholds).