Nano-composite solid polymer electrolytes for solid state ionic devices

Recent research efforts to improve the ambient temperature conductivity in polyethylene oxide (PEO) based solid polymer electrolytes have been directed towards the incorporation of ultra-fine nano-sized particles of ceramic fillers such as Al₂O₃, γ-LiAlO₂, SiO₂ and TiO₂ into the polymer electrolyte. In these PEO based nano-composite polymer electrolytes, conductivity enhancements of up to two orders of magnitude have been achieved. Thermal, electrical conductivity and dielectric relaxation measurements performed on several nano-composite polymer electrolyte systems have shown that the degree of enhancement depends primarily on the grain size. In this paper, results of three nano-composite polymer electrolyte systems, PEO:LiTFSI:Al₂O₃, PEO:LiTf:Al₂O₃ and PEO:LiTf: SiO₂ are discussed as representative examples. It is suggested that the conductivity enhancement is due to the creation of additional sites and favourable conduction pathways for ionic transport through Lewis acidbase type interactions between the filler surface groups (H/OH) and the ionic species. Paper presented at the 2nd International Conference on Ionic Devices, Anna University, Channai, India, Nov. 28–30, 2003.     

The effect of hard segment content on ionic conductivity of poly(ether urethane)-based solid polymer electrolytes

To investigate the effect of hard segment content on ionic conductivities of poly(ether urethane) (PEU)-based solid polymer electrolytes (SPEs), PEUs containing 20, 40, 60, 80, and 100 wt.% of hard segment content were synthesized. Also we introduced polymer-in-salt system with ion-hopping mechanism contrary to traditional salt-in-polymer system with segmental motion mechanism and investigated the effect of hard segment of PEU on ionic conductivities by A.C. impedance, FT-IR, DSC, and SEM. And it could be known that hydrogen bonding of urethane group influenced the ionic conductivities of PEU-based SPE. PEU-based SPE containing 70 wt.% of salt and 20 wt.% of hard segment showed the highest ionic conductivity of 2.95 × 10⁻⁵ S/cm at room temperature.     

Study on ionic conductivity and dielectric properties of PEO-based solid nanocomposite polymer electrolytes

The ionic conductivity and dielectric properties of the solid nanocomposite polymer electrolytes formed by dispersing a low particle-sized TiO₂ ceramic filler in a poly (ethylene oxide) (PEO)-AgNO₃ matrix are presented and discussed. The solid nanocomposite polymer electrolytes are prepared by hot press method. The optimum conducting solid polymer electrolyte of polymer PEO and salt AgNO₃ is used as host matrix and TiO₂ as filler. From the filler concentration-dependent conductivity study, the maximum ionic conductivity at room temperature is obtained for 10 wt% of TiO₂. The real part of impedance (Z′) and imaginary part of impedance (Z″) are analyzed using an LCR meter. The dielectric properties of the highest conducting solid polymer electrolyte are analyzed using dielectric permittivity (ε′), dielectric loss (ε″), loss tangent (tan δ), real part of the electric modulus (M′), and imaginary part of the electric modulus (M″). It is observed that the dielectric constant (ε′) increases sharply towards the lower frequencies due to the electrode polarization effect. The maxima of the loss tangent (tan δ) shift towards higher frequencies with increasing temperature. The peaks observed in the imaginary part of the electric modulus (M″) due to conductivity relaxation shows that the material is ionic conductor. The enhancement in ionic conductivity is observed when nanosized TiO₂ is added into the solid polymer electrolyte.     

Effect of ionic liquid on chain segment motion and charge detrapping in poly(l-lactide)/ionic liquid composites

The effect of ionic liquid on the chain segment motion and charge detrapping in poly(l-lactide) (PLA)/ionic liquid (IL) composites has been investigated by means of thermally stimulated depolarization current (TSDC), scanning electron microscopy, and differential scanning calorimetry. There are four current peaks (namely, α, ρ₁, ρ₂, and ρ₃ peaks, respectively) in TSDC spectra of PLA and PLA/IL composites. The α peak corresponds to the glass transition, the ρ₁ peak is attributed to space charge trapped in the amorphous phase, the ρ₂ peak is originated from space charge trapped in the interphase that includes PLA/IL interface and crystalline/amorphous interface of PLA, and the ρ₃ peak is originated from space charge trapped in the crystalline phase. With the increase of IL content from 0 to 5phr, ρ₂ and ρ₃ peaks gradually merge into one single peak. By analyzing the characteristic parameters of these peaks, it is found that IL can accelerate the mobility of chain segments and increase structural defects in PLA/IL composites. In addition, IL decreases the stability of trapped charge in both amorphous and crystalline phases, but not affecting the stability of trapped charge in interphase.     

Determination of proton diffusion in solid electrolytes

Two electrochemical methods have been used to determine the proton diffusion in solid electrolytes. One is based on transient ionic current measurements and a reasonable physical model; the other one is a quick determination using steady-state transport. The results of proton diffusion coefficients of 10⁻⁶ and 10⁻⁵ cm²/s obtained for the α- and β-phases of Li₂SO₄, respectively, using these two methods are in a good agreement with published results. The methods turned out to be very useful for determining proton diffusion in solid electrolytes, especially when the electrolytes contain more than one type of the mobile ionic species and a low concentration of the protons. Paper presented at the 4th Euroconference on Solid State Ionics, Renvyle, Galway, Ireland, Sept. 13–19, 1997     

Enhanced luminance efficiency of polymer light emitting diode by blending with ionic solid electrolytes

In this letter, we demonstrate that luminance efficiency of polymer light emitting diode can be significantly enhanced by adding a small amount of ionic solid electrolytes. Heterojunction polymer device, consist of MEH-PPV, C₆₀, methanofullerene([6,6}-phenyl C61-butyric acid methyl ester) PCBM and/or PEO as the active materials. It has been found that blending of ionic solid electrolytes, such as polyethylene oxide into active layer, enhances the luminance efficiency of polymer device. It is believed that the optimized polymer morphology improves carrier mobility of MEH-PPV. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006.     

Effect of branching in base polymer on ionic conductivity in hyperbranched polymer electrolytes

Novel hyperbranched polymer, poly[bis(diethylene glycol)benzoate] capped with a 3,5-bis[(3′,6′,9′-trioxodecyl)oxy]benzoyl group (poly-Bz1a), was prepared, and its polymer electrolyte with LiN(CF₃SO₂)₂, poly-Bz1a/LiN(CF₃SO₂)₂ electrolyte, was all evaluated in thermal properties, ionic conductivity, and electrochemical stability window. The poly-Bz1a/LiN(CF₃SO₂)₂ electrolyte exhibited higher ionic conductivity compared with a polymer electrolyte based on poly[bis(diethylene glycol)benzoate] capped with an acetyl group (poly-Ac1a), and the ionic conductivity of poly-Bz1a/LiN(CF₃SO₂)₂ electrolyte was to be 7×10⁻⁴ S cm⁻¹ at 80 °C and 1×10⁻⁶ S cm⁻¹ at 30 °C, respectively. The existence of a 3,5-bis[(3′,6′,9′-trioxodecyl)oxy]benzoyl group as a branching unit present at ends in the base polymer improved significantly ionic conductivity of the hyperbranched polymer electrolytes. The polymer electrolyte exhibited the electrochemical stability window of 4.2 V at 70 °C and was stable until 300 °C.     

Observation of ionic thermocurrents in zirconia-based solid electrolytes

In ionic conductors, long range-migrating charges are a main cause of polarization processes. This has complicated, up to date, the study of ionic thermocurrents (ITC) in solid electrolytes. However, the method is appealing, as it probes directly charge-formation phenomena that are important both from a scientific point of view and for applications. This work reports on the observation of ITC in solid electrolytes. Under appropriate experimental conditions, the ITC response of a zirconia sample electroded with platinum is a reproducible one, thus opening the way to a new characterization method that may complement other well established methods, such as Impedance Spectroscopy and a number of electrochemical techniques. The general trends of the response, which is composed of two well resolved ITC peaks, is discussed. One of them, taking place at higher temperatures, conforms to the standard shape of a first order kinetics depolarization process. Paper presented at the 2nd Euroconference on Solid State Ionics, Funchal, Madeira, Portugal, Sept. 10–16, 1995     

Influence of plasticizer on ionic conductivity of PVC-PBMA polymer electrolytes

Plasticized polymer electrolytes comprising of ethylene carbonate as the plasticizing agent in poly (vinyl chloride) [PVC]–poly (butyl methacrylate) [PBMA] blended polymer electrolytes were prepared by solution casting technique. Complex formation, structural elucidation, conductivity, dielectric parameters (?′, ?″, M′, and M″), thermal stability, and surface morphology are brought out from FTIR, XRD, ac impedance analysis, dielectric studies, thermogravimetry/differential thermal analysis, and scanning electron microscopic studies, respectively. Polymer electrolytes are found to exhibit higher ionic conductivity at higher concentration of plasticizer at the cost of their mechanical stability. Conductivity of 1.879 × 10^?4 S cm^?1 is exhibited by the polymer electrolyte consisting of 69% of plasticizer with appreciable thermal stability up to 523 K. Temperature and frequency dependence of conductivity is found to follow Vogel Tammann Fulcher relation and Jonscher power law, respectively. Real and imaginary parts of dielectric constants are found to decrease with increase in frequency which could be due to the electrode polarization effect.     

Preparation and ionic conductivity of composite polymer electrolytes based on hyperbranched star polymer

Hyperbranched star polymer HBPS-(PPEGMA) _x was synthesized by atom transfer radical polymerization (ATRP) using hyperbranched polystyrene (HBPS) as macroinitiator and poly(ethylene glycol) methyl ether methacrylate (PEGMA) as monomer. The structure of the prepared hyperbranched star polymer was characterized by ¹H NMR, ATR-FTIR, and GPC. Polymer electrolytes based on HBPS-(PPEGMA) _x , lithium salt, and/or nano-TiO₂ were prepared. The influences of lithium salt concentration and type, nano-TiO₂ content, and size on ionic conductivity of the obtained polymer electrolytes were investigated. The results showed that the low crystallinity of the prepared polymer electrolyte was caused by the interaction between lithium salt and polymer. The addition of TiO₂ into HBPS-(PPEGMA) _x /LiTFSI improved the ionic conductivity at low temperature. The prepared composite polymer electrolyte showed the highest ionic conductivity of 9?×?10^?5 S cm^?1 at 30 °C when the content of TiO₂ was 15 wt% and the size of TiO₂ was 20 nm.     

Ion transport in proton conducting solid polymer electrolytes

In this communication the ion transport properties of polyvinyl alcohol complexed with orthophosphoric acid (H₃PO₄) have been investigated. The proton conduction is confirmed by hydrogen gas evolved at the cathode of the coulometer and the transference number of H⁺ ion has been determined. The transient ionic current (TIC) technique has been used to detect the mobile ionic species and their mobilities are evaluated. The ionic mobility was found to be of the order of 10⁻⁴ cm².V⁻¹.s⁻¹ for H⁺ ions. It is observed that the bulk electrical conductivity increases with the temperature following the Arrhenius type behaviour. Variation of charge carrier concentration with the molar ratio of H₃PO₄ in the sample reveals that the carrier concentration is largely affected by the amount of dopant in the complexes.     

A computer simulation study of ionic conductivity in polymer electrolytes

In this paper we present a computer simulation study of ionic conductivity in solid polymeric electrolytes. The multiphase nature of the material is taken into account. The polymer is represented by a regular lattice whose sites represent either crystalline or amorphous regions with the charge carrier performing a random walk. Different waiting times are assigned to sites corresponding to the different phases. A random walk (RW) is used to calculate the conductivity through the Nernst-Einstein relation. Our walk algorithm takes into account the reorganization of the different phases over time scales comparable to time scales for the conduction process. This is a characteristic feature of the polymer network. The qualitative nature of the variation of conductivity with salt concentration agrees with the experimental values for PEO-NH₄I and PEO-NH₄SCN. The average jump distance estimated from our work is consistent with the reported bond lengths for such polymers.     

Decoupling of ionic transport from segmental relaxation in polymer electrolytes

We present detailed studies of the relationship between ionic conductivity and segmental relaxation in polymer electrolytes. The analysis shows that the ionic conductivity can be decoupled from segmental dynamics and the strength of the decoupling correlates with the fragility but not with the glass transition temperature. These results call for a revision of the current picture of ionic transport in polymer electrolytes. We relate the observed decoupling phenomenon to frustration in packing of rigid polymers, where the loose local structure is also responsible for the increase in their fragility.     

Ni-MH battery based on plasticized alkaline solid polymer electrolytes

Solid-state nickel metal hydride cells were fabricated using plasticized alkaline solid polymer electrolytes (ASPE) prepared from polyvinyl alcohol (PVA), potassium hydroxide (KOH), alumina (α-Al₂O₃), and propylene carbonate (PC). The ASPE film with PVA/KOH/α-Al₂O₃/PC/H₂O weight ratio of 1.00:0.67:0.09:2.64:1.32 and conductivity of (6.6 ± 1.7) × 10⁻⁴ S cm⁻¹ was used in fabrication of the electrochemical cells. To investigate the electrochemical properties of the plasticized ASPE, cells with the configuration Mg₂Ni/plasticized ASPE/Ni(OH)₂ were fabricated. At the eighth cycle with a current drain of 0.1 mA and plateau voltage of ∼1.1 V, the discharge lasted for 14 h before the cell was considered to have failed. The failure mode of the cell was due to the formation of thin Mg(OH)₂ insulating layers.     

Synthesis of star macromolecules for solid polymer electrolytes

The star macromolecules (SM) were synthesized from phloroglucinol, phosphorus oxychloride, and poly(ethylene glycol methyl ether) with different molecular weight. Structures of the products were characterized by Fourier transform infrared and ¹H-nuclear magnetic resonance. Solid polymer electrolyte films were prepared by mixing the products with poly(ethylene oxide) (PEO) and LiClO₄. The polymer blends of PEO and SM have been characterized by differential scanning calorimetry and thermogravimetry, and the polymer electrolytes have been characterized by alternating current impedance. All the SM products could improve the conductivities of the polymer electrolyte obviously at a temperature range from 20 °C to 80 °C.     

Characterisation of plasticized PMMA based solid polymer electrolytes

Polymer electrolyte films prepared from poly (methyl methacrylate) and LiAsF₆ with different concentrations of plasticizer (DBP) are described. The formation of polymer-salt complexes has been confirmed by XRD and FTIR spectral studies. The temperature dependence of the conductivity of the polymer films obeys the VTF relation. Values of conductivities of the polymer complexes are presented and discussed.     

Oxygen self-diffusion and ionic conductivity of oxide solid electrolytes

The self-diffusion coefficient for a stochastically nonuniform thermodynamic system is represented as the mean value of the transition rates. A model for the ionic transport in solid oxide electrolytes is proposed. The existence of percolation cluster of the doping cations is taken into account in the model. The maximum of the concentration dependence of the ionic conductivity is explained by the blocking effect and random distribution of traps. The problem of inconsistency of theoretical and experimental values for the pre-exponential factor is discussed and an approach is proposed to overcome this disagreement.     

Ionic conductivity studies in composite solid polymer electrolytes based on methylmethacrylate

The preparation and characterization of composite polymer electrolytes of PMMA-LiClO₄-DMP for different concentrations of CeO₂ have been investigated. FTIR studies indicate complex formation between the polymer, salt and plasticizer. The electrical conductivity values measured by a.c. impedance spectroscopy are found to depend upon the CeO₂ concentration. The temperature dependence of the conductivity of the polymer films seems to obey the VTF relation. The conductivity values are presented and the results are discussed.     

The investigation of electrochemical properties and ionic motion of functionalized copolymer electrolytes based on polysiloxane

The effect of EO side chain functionalization on the transport and electrochemical properties of polysiloxane electrolytes has been examined in this report. First, a study of the electrochemical stability of the electrolytes by linear sweep voltammetry shows that the polymer electrolytes have a negligible effect on the electrolyte stability windows. In addition, the parameters of cation mobility in polysiloxane electrolytes, such as ionic transference numbers and diffusion coefficients, were increased by increasing the lengths of the EO side chain. However, cation mobility in polymer structures is quite different compared to liquid-based systems and is probably suppressed, resulting in their polymer structure. Therefore, Positron Annihilation Lifetime Spectroscopy (PALS) was used to study the relationship between orthopositronium (o-Ps) lifetime, free volume radius, free volume of micro voids and EO side chain affection at different temperatures. Finally, a battery application with LiCoO₂ and LiFePO₄/polymer electrolyte/lithium metal electrode was monitored for its potential use in the future.     

Pipe-sphere model for enhancement of ionic conductivity in composite solid electrolytes

It is well-known that the ionic conductivity of a superionic conductor when dispersed with an insulator shows a remarkable enhancement. In this work we suggest that the contribution coming from grain-boundaries and dislocations is primarily responsible for this phenomenon in a number of cases. We propose a simple theoretical model for such composites and with the aid of the Effective Medium Theory (EMT) under self-consistent scheme we estimate the effective conductivity as a function of insulator volume fraction and particle size for four composites, namely CaF₂-Al₂O₃, CuCl-Al₂O₃, Sr(NO₃)₂-Al₂O₃ and SrCl₂-Al₂O₃. This model is applicable to composites where enhancement is observed for a very low insulator volume fraction and other prevalent models are inadequate. The results exhibit a good qualitative fit to the experimental data and all characterisitic experimental observations.