Adsorption states of dialkyl ditelluride autooxidized monolayers on Au(111)

Organic ditellurides (R2Te2 where R = n-butyl (C4), n-octyl (C8), and n-cetyl (C16)) were synthesized, and their adsorption states after oxidation on Au(111) surfaces were studied by X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), theoretical analyses, near-edge X-ray absorption fine structure (NEXAFS) measurements, contact angle measurements, and atomic force microscopy (AFM). The obtained results show that dialkyl ditellurides form autooxidized monolayers (AMs) on the surfaces under ambient conditions and that the oxidation process is accelerated by ambient light. XPS, UPS, and theoretical analyses suggest that the autooxidized ditelluride species consist of polymers or oligomers with Te-O-Te-O network structures stabilized by oxygen bridges between tellurium molecules following the cleavage of tellurium-gold bonds. NEXAFS and contact angle measurements indicate that the average tilt angles of the alkyl chains from the surface normal are smaller for the AMs of dialkyl ditellurides having longer alkyl chains. AFM measurements show defects and roughness features around a few angstroms in height on the surfaces of the dialkyl ditelluride AMs.     

A Stereoselective Synthesis of (E)-Divinyl Diselenides and (E)-Divinyl Ditellurides

Insertion of elemental selenium or tellurium into the Csp²-Zr bond of alkenylchlorozirconocenes followed by oxidation in air affords (E)-divinyl diselenides or (E)-divinyl ditellurides.     

Condensation reaction with methylketones and aromatic compounds containing electron-repelling groups

Aryl tellurium trichlorides and tribromides undergo condensation reactions with acetone, acetophenone, N-dimethylaniline and resorcinol, giving rise to aryl tellurium dihalides. Aryl tellurium triiodides are not reactive. The dihalides derived from N-dimethylaniline and resorcinol undergo ionic interchange reactions with halide ions. When treated with reducing agents the dihalides derived from N-dimethylaniline are reduced to the corresponding tellurides, while the other dihalides are cleaved to the diaryl-ditellurides.     

Transition-Metal-Free Synthesis of Unsymmetrical Diaryl Tellurides via SH2 Reaction of Aryl Radicals on Tellurium

Although diaryl tellurides are parent organotellurium compounds, their synthesis methods, especially for unsymmetrical ones, are limited. This may be due to the instability of diaryl tellurides and their synthesis intermediates under reaction conditions. Radical reactions are known to exhibit excellent functional group selectivity; therefore, we focused on a bimolecular homolytic substitution (S_H2) reaction between the aryl radical and diaryl ditelluride. Aryl radicals are generated from arylhydrazines in air and captured by diaryl ditellurides, resulting in a selective formation of unsymmetrical diaryl tellurides with high yields. The electronic effects of the substituents on both arylhydrazines and diaryl ditellurides on the S_H2 reaction of tellurium are also discussed in detail.     

Insertion and 2+2 Dismutation Reactions Including P-P,Te-Te and Se-Se Bonds

Abstract

Reactions of diphosphanes and cyclophosphanes with selenium, tellurium and organic ditellurides have been studied.     

A New Route for the Synthesis of Dialkyl Tellurides and Dialkyl Ditellurides

Sodium cleaves elemental tellurium, Te_X, quantitatively to Te^2– ₂ and Te^2- in anhydrous tetrahydrofuran in the presence of catalytic amounts of naphthalene. Subsequent addition of alkylating agent affords dialkyl tellurides and dialkyl ditellurides in excellent yields.     

Experimental and theoretical investigations of lithium and magnesium derivatives of bis(tert-butylamido)cyclodiphosph(III/V)- and (V/V)azane mono- and ditellurides

Deprotonation of bis(tert-butylamido)cyclophosph(III/III)azane with organolithium or organomagnesium reagents followed by oxidation with elemental tellurium is a viable approach to the preparation of metal cyclodiphosphazane mono- and ditellurides. The reaction of the cyclodiphosph(III)azane [tBu(H)NP(mu-NtBu)2PN(H)tBu] (1) with elemental tellurium in boiling toluene affords the monotelluride [tBu(H)N(Te)P(mu-NtBu)2PN(H)tBu] (9). A similar reaction involving the magnesium salt Mg[tBuNP(mu-NtBu)2PNtBu](THF)2 (2) also yields a monotelluride Mg[tBuN(Te)P(mu-NtBu)2PNtBu]-(THF)2 (10). By contrast, reaction of the lithium salt Li2[tBuNP(mu-NtBu)2PNtBu](THF)2 (3) with tellurium results in double oxidation and the formation of the ditellurides Li2[tBuN(Te)P(mu-NtBu)2P(Te)NtBu](THF)4 (11) and Li2-[tBuN(Te)P(mu-NtBu)2P(Te)NtBu](tmeda)2 (12). Compounds 9-12 have been characterized by multinuclear (1H, 7Li, 13C, 31P, and 125Te) NMR, while 9, 10, and 12 have also been characterized by X-ray crystallography. The structure of 9 reveals a typical cis/endo, exo arrangement, with no intermolecular contacts to tellurium. The seco-heterocubic structure, observed in 2, is retained in 10, with the ligand chelating magnesium in an N,N',N"-manner. Unique coordination behavior is exhibited by the ditelluride 12, in which the dianionic ligand is attached to the two lithium centers in both Te,Te' and Te,N bonding modes. Multinuclear NMR data are consistent with retention of the solid-state structures of 9-12 in solution at low temperatures. The reactivity of cyclodiphosph(III/III)azanes toward chalcogens is rationalized by using theoretical calculations (semiempirical PM3 level of theory), which show an inverse correlation between the charge at the phosphorus center and the ease of oxidation.     

Facile access to organotellurium heterocycles by nitration of bis(3,5‐dimethylphenyl) ditelluride

Efficient access to bis(nitrophenyl) ditellurides was developed and their utility for the preparation of novel nitrogen‐containing organotellurium heterocycles demonstrated. The nitration of diphenyl ditellurides resulted in their oxidation to benzenetellurinic acids, followed by nitration in ortho or meta positions relative to tellurium. Nitration of bis(3,5‐dimethylphenyl) ditelluride furnished bis(3,5‐dimethyl‐2‐nitrophenyl) ditelluride, which was elaborated into 2,4,6‐trimethylbenzotellurazole and (Z)‐2‐methoxycarbonylmethylene‐3,4‐dihydro‐3‐oxo‐2H‐benzo‐1,4‐tellurazine, the first reported 3,4‐dihydro‐2H‐benzo‐1,4‐tellurazine. This compound, as well as 2,4,6‐trimethyltellurazolium (4‐dicyanomethylene‐cyclohexa‐2,5‐dienylidene)cyanoacetate were characterized by x‐ray crystallography.     

Aspects of the Chemistry of Diarylditellurides and Related Compounds containing Telurium to Tin Bonds

The examination mixtures of two ditellurides by mass and ¹H nmr spectroscopies provides the first evidence for the existence of unsymmetrical diarylditellurides, RTeTeR′. Possible mechanisms for the redistribution reaction are discussed and it is noted that no positive support for a radical mechanism is obtained. Appearance potential measurements on the ion (aryl)Te⁺ derived from a number of organotellurium compounds suggest that tellurium extrusion may be a low energy pathway for the decomposition of diarylditellurides. A new series of compounds, Ph₃SnTe(aryl) is reported and they are examined by ¹¹⁹Sn and ¹²⁵Te Mösabauer spectroscopies. Attempts are made to interpret the Mösabauer data in terms of orbital populations, and it is demonstrated that only an sp bonding model gives a self-consistent interpretation of the combined tin and tellurium Mösabauer data.     

Organische tellurverbindungen : III. Photoreaktionen von tellurolestern in lösung

Six new telluroesters Ia—If of aromatic carboxylic acids and the photoreactions of this class of compounds are described for the first time. These telluroesters undergo photoinduced α-cleavage and, in three cases, telluro-photo-Fries-reactions with the formation of free radicals II, III and IV; these free radicals yield the aldehydes V, the tellurides VII or the ditellurides VI and VIII either via hydrogen abstraction, dimerization and elimination of tellurium or via dimerization. Two methylthio as well as aryltelluro substituted benzophenone derivatives (VIId and VIIId) exhibit new types of aromatic photosubstitution reactions, yielding thioxanthone IX, via a cyclization reaction, which also occurs under electron-impact conditions.     

Alkyl telluraalkanoates CnH2n+1Te(CH2)mCOOR (R = CH3, C2H5 OR H)

Methyl telluraalkanoates, C_nH_2n+1Te(CH₂)_mCOOR (n, m: 4, 7; 6, 4; 6, 7; 6, 9; 7, 4; 8, 7; 11, 2; 11, 5; 18, 11) were synthesized in yields ranging from 33 to 82 percent based on the quantities of the methyl ω-bromoalkanoates substrates. Disodium ditelluride was obtained from tellurium and sodium in ethylenediamine and was treated with alkyl bromides to give dialkyl ditellurides. The crude ditellurides were reduced with NaBH₄ to the alkane tellurolates which were coupled with methyl ω-bromoalkanoates to give the methyl telluraalkanoates. Ethyl 4-tellurapentadecanoate was prepared similarly from ethyl 3-bromopropanoate. The telluraalkanoates were characterized by elemental analyses, mass spectrometry, NMR spectrometry, and UV and IR spectrophotometry. Telluraalkanoates radiolabeled with ^123mTe or other radioisotopes have been reported elsewhere to be preferentially taken up by the heart and promise to be useful as myocardial imaging agents.     

A Regioselective Synthesis of Novel Functionalized Organochalcogen Compounds by Chalcogenocyclofunctionalization Reactions Based on Chalcogen Halides and Natural Products

The regioselective synthesis of novel functionalized condensed organochalcogen compounds by chalcogenocyclofunctionalization reactions based on chalcogen halides and the natural products thymol and carvacrol has been developed. The reactions of selenium dibromide with allyl thymol and allyl carvacrol proceeded in methylene chloride at room temperature in the presence of NaHCO₃ affording bis[(7-isopropyl-4-methyl-2,3-dihydro-1-benzofuran-2-yl)methyl] and bis[(4-isopropyl-7-methyl-2,3-dihydro-1-benzofuran-2-yl)methyl] selenides in 90–92% yield. Similar sulfides were obtained in 70–72% yields by the reaction of sulfur dichloride in chloroform under reflux. Trihalotellanes containing the same organic moieties were synthesized from allyl thymol, allyl carvacrol and tellurium tetrachloride or tetrabromide in quantitative yields. Corresponding functionalized ditellurides were prepared in 91–92% yields by the reduction of the trichlorotellanes with sodium metabisulfite in two-phase solvent system. The comparison of reactivity of sulfur, selenium and tellurium halides in chalcogenocyclofunctionalization and distinguishing features of each reaction were discussed.     

Tellurium adatoms as an in-situ surface probe of (111) two-dimensional domains at platinum surfaces

Irreversibly adsorbed tellurium has been studied as a probe to quantify ordered domains in platinum electrodes. The surface redox process of adsorbed tellurium on the Pt(111) electrode and Pt(111) stepped surfaces takes place around 0.85 V in a well-defined peak. The behavior of this redox process on the Pt(111) vicinal surfaces indicates that the tellurium atoms involved in the redox process are only those deposited on the (111) terrace sites. Moreover, the corresponding charge density is proportional to the number of sites on (111) ordered domains (terraces) that are, at least, three atoms wide. Hence, this charge density can be used to measure the number of (111) terrace sites on any given platinum sample. Structural information about tellurium adsorption is obtained from atomic-resolution STM images for the Pt(111) and Pt(10, 10, 9) electrodes. A rectangular structure (2 x radical 3) and a compact hexagonal structure (11 x 8) were identified. However, the redox peak for adsorbed tellurium on (100) domains at 1.03 V overlaps with peaks arising from steps and (110) sites. Therefore, it cannot be used without problems for the determination of (100) sites on a platinum sample. On the (100) terraces, the surface structure of the adsorbed tellurium is c(2 x 2), as revealed by STM. Finally, tellurium irreversible adsorption has been used to estimate the number of (111) ordered domains terrace sites on different polycrystalline platinum samples, and the results are compared to those obtained with bismuth irreversible adsorption.     

Functionalized tellurols: synthesis, spectroscopic characterization by photoelectron spectroscopy, and quantum chemical study

Ethene-, cyclopropane-, 3-butene-, and cyclopropanemethanetellurol have been synthesized by reaction of tributyltin hydride with the corresponding ditellurides and characterized by 1H, 13C, and 125Te NMR spectroscopy and high-resolution mass spectrometry. The tellurols of this series, with a gradually increasing distance between the tellurium atom and the unsaturated group, have been studied by photoelectron spectroscopy and quantum chemical calculations. Two stable conformations of ethenetellurol and cyclopropanetellurol, five of allyltellurol, and four of cyclopropanemethanetellurol were found. In the photoelectron spectrum of vinyltellurol, the huge split between the first two bands indicates a direct interaction between the tellurium lone electron pair and the double bond. In the allyl derivative, a hyperconjugation effect was found for the most stable conformers. In contrast to the vinyl compounds, no direct interaction between the lone electron pair of X (X = O, S, Se, and Te) and the three-membered ring could be observed in the cyclopropyl derivatives. A hyperconjugation-like effect, which is independent of the relative orientation of the X-H group, is found to increase from S to Te. Thus, the type and extent of the interaction between the TeH group and an unsaturated or cyclopropyl moiety are clarified while the first comparison of interactions between the nonradioactive unsaturated chalcogen derivatives is performed.     

Hypervalent Iodine in Synthesis

A new and facile method for the preparation of arenetellurinic mixed anhydrides is described from diaryl ditellurides and phenyliodine (III) dicarboxylates. Hydrolysis of the arenetellurinic mixed anhydrides gives arenetellurinic anhydrides and a one - pot procedure involving the reaction of diaryl ditellurides with phenyliodine (III) dicarboxylates in a two - phase system of methylene chloride and aqueous solution of sodium hydroxide for the preparation of arenetellurinic anhydrides is provided.     

Synthesis and characterization of some ferrocene-containing telluroether ligands: crystal structure of 1,1′-bis(phenyltelluro)ferrocene

A series of five monodentate ferrocene tellurium ligands of the type Fe(C₅H₅)(C₅H₄TeR) and five bidentate 1,1′-disubstituted ferrocene tellurium ligands of the type Fe(C₅H₄TeR)₂ (R = Me, ⁿBu, C₆H₅, p-MeOC₆H₄, p-EtOC₆H₄) has been prepared by the reaction of 1,1′-dilithioferrocene with the appropriate ditellurides R₂Te₂. The ligands have been characterized by their elemental analyses, ¹H and ¹³C NMR spectra, mass spectra and cyclic voltammetry studies. The structure of Fe(C₅H₄TeC₆H₅)₂ has been determined by single-crystal X-ray diffraction study.     

Nanostructure Synthesis at the Solid–Water Interface: Spontaneous Assembly and Chemical Transformations of Tellurium Nanorods

Bottom‐up synthesis offers novel routes to obtain nanostructures for nanotechnology applications. Most self‐assembly processes are carried out in three dimensions (i.e. solutions); however, the large majority of nanostructure‐based devices function in two dimensions (i.e. on surfaces). Accordingly, an essential and often cumbersome step in bottom‐up applications involves harvesting and transferring the synthesized nanostructures from the solution onto target surfaces. We demonstrate a simple strategy for the synthesis and chemical transformation of tellurium nanorods, which is carried out directly at the solid–solution interface. The technique involves binding the nanorod precursors onto amine‐functionalized surfaces, followed by in situ crystallization/oxidation. We show that the surface‐anchored tellurium nanorods can be further transformed in situ into Ag₂Te, Cu₂Te, and SERS‐active Au–Te nanorods. This new approach offers a way to construct functional nanostructures directly on surfaces.     

High-quality luminescent tellurium nanowires of several nanometers in diameter and high aspect ratio synthesized by a poly (vinyl pyrrolidone)-assisted hydrothermal process

Large-scale selective synthesis of uniform single crystalline tellurium nanowires with a diameter of 4-9 nm, and microbelts with a width of 250-800 nm and tens of micrometers in length, can be realized by a poly (vinyl pyrrolidone) (PVP)-assisted hydrothermal process. The formation of tellurium nanowires and nanobelts in the presence of PVP is strongly dependent on the reaction conditions such as temperature, the amount of PVP, and reaction time. The results demonstrated that the keys for selective synthesis of Te nanobelts and nanowires are to modulate the growth rates of (100), (101), and (110) planes in the presence of PVP and to precisely control the reaction kinetics. High-quality luminescent ultrathin t-Te nanowires with a diameter of 4-9 nm display strong luminescent emission in the blue-violet region. This approach provides a facile route for the production of high-quality tellurium nanostructures with an interesting optical property. Furthermore, the synthesized ultrathin nanowires with deep blue color and nanobelts in gray color by this approach can be well dispersed in water or ethanol, making it possible for further engineering of their surfaces to prepare other hybrid core-shell nanostructures.     

二碘化钐促进的 β-碲代酯(腈)的合成

本文报道在室温, 中性介质中研究二碘化钐在合成中的应用. 在二碘化钐作用下,二碲醚发生Te-Te键还原断裂, 生成碲负离子物种, 后者再与α,β-不饱和酯(腈)发生Michael加成, 得到β-碲代酯(腈), 产率较高.     

Reductive Cleavage of Te-Te Bond in Ditellurides by Sm / ZrCl4 System : a Novel Method for the Synthesis of β-Telluroesters (and Nitriles)

Diaryl ditellurides were conveniently reduced by a system consisting of samarium and zirconium tetrachloride in tetrahydrofuran to produce samarium aryltellurolates. This new tellurolate anion species reacted smoothly with α, β-unsaturated esters (and nitriles) to give β-telluroesters (and nitriles) in good yields.