Unexpectedly ligand-free copper-catalyzed C–S cross-coupling of benzothiazole with aryl iodides in aqueous solution

A novel synthetic protocol for 2-aminophenyl sulfide derivatives via the reactions of benzothiazole with aryl iodides was reported for the first time. The reactions were catalyzed by CuCl with tetrabutylammonium hydroxide as the base and water as the solvent without ligand at 50 °C or room temperature. A variety of aryl iodides underwent the C–S cross-coupling reaction with benzothiazole to afford smoothly the corresponding products in excellent yield.     

Copper-catalyzed cross-coupling of amides and potassium alkenyltrifluoroborate salts: a general approach to the synthesis of enamides

Potassium alkenyltrifluoroborate salts undergo coupling with amides to give enamides using a catalytic amount of Cu(OAc)₂ under mild oxidative conditions. The air and water stable alkenyltrifluoroborate salts offer a practical alternative to the use of alkenyl halides and alkenylboronic acids as cross-coupling partners. A range of amides participate in the cross-coupling, including heterocyclic amides, imides, carbamates, benzamides, and acetamides. Optimization studies established two sets of conditions, best suited to either high pK_a or low pK_a amide substrates. Lower pK_a amide substrates worked best using a dichloromethane solvent system in the presence of 4 Å molecular sieves, 10 mol % Cu(OAc)₂, and 20 mol % N-methylimidazole. Higher pK_a amide substrates worked best using a ‘ligandless’ protocol using a 1:1 dichloromethane/DMSO solvent system in the presence of 4 Å molecular sieves and 10 mol % Cu(OAc)₂. The cross-coupling reactions occur stereospecifically with retention of alkene configuration from the alkenyltrifluoroborate salt. The mild reaction conditions employed are tolerant of various functionalities, including nitro, acetals, alkyl and aryl halides, and α,β-unsaturated carbonyls. Finally, the importance of copper sources and the presence of minor impurities were investigated.     

Catalytic Friedel–Crafts allylation using Zn(II) triflimidate

The activity of various metallic triflates and triflimidates in the Friedel–Crafts allylation of activated aromatic rings was examined. Zinc bis(trifluoromethylsulfonyl)amide was proved to be a good catalyst in the model reaction with anisole and prenyl acetate. The Friedel–Crafts allylation reaction of various aryl derivatives with allyl acetates was efficiently catalysed under mild conditions, using 3 mol% of Zn(NTf₂)₂ as the catalyst, without solvent, at 100 °C. The desired ortho and para mono-allylated products were selectively obtained in good yields. The para isomer was always favoured.     

Highly efficient thermal cyclization reactions of alkylidene esters in continuous flow to give aromatic/heteroaromatic derivatives

Intramolecular thermal cyclization and benzannulation reactions of the Gould–Jacobs and Conrad–Limpach types were performed in a designed continuous flow reactor system at temperatures in the range of 300–360 °C and under high pressure conditions (100–160 bar) with very short residence times (0.45–4.5 min) in tetrahydrofuran as a low-boiling point solvent. Substituted heteroaromatic compounds including pyridopyrimidinones and hydroxyquinolines were synthesized in moderate to high yields. Application of the reaction conditions also allows the synthesis of naphthol and biphenyl derivatives. The procedure involves an easy work-up and the non-batchwise preparative synthesis method is suitable for automation.     

Synthesis of unsymmetrically disubstituted ethynes by the palladium/copper(I)-cocatalyzed sila-Sonogashira–Hagihara coupling reactions of alkynylsilanes with aryl iodides,bromides, and chlorides through a direct activation of a carbon–silicon bond

In this paper, we explore the copper/palladium-cocatalyzed cross-coupling reactions of 1-aryl-2-trimethylsilylethynes with aryl iodides, bromides, and chlorides as coupling partners, to furnish unsymmetrically disubstituted ethynes in moderate to excellent yields. Various aryl iodides were subjected to reaction under the optimized conditions with 5 mol % of Pd(PPh₃)₂ and 50 mol % of CuCl. The steric properties of the aryl iodide proved more influential to the outcome of the cross-coupling reaction than electronic factors. In addition, we succeeded in synthesizing unsymmetrical diarylethynes using two different aryl iodides in one-pot. Furthermore, under the same reaction conditions with 10 mol % of PdCl₂, 40 mol % of P(4-FC₆H₄)₃, and 50 mol % of CuCl as catalyst, we succeeded in synthesizing unsymmetrical diarylethynes from various aryl bromides. Finally, we explored reactions with aryl chlorides and duly discovered that unsymmetrical diarylethynes were obtainable in moderate to good yields when 10 mol % of Pd(OAc)₂, 10 mol % of (?)-DIOP, and 10 mol % of CuCl were used. These reactions proceed through a direct activation of a carbon–silicon bond in alkynylsilanes by CuCl to generate the corresponding alkynylcopper species via transmetalation from silicon to copper. Mechanistic investigations on the reaction of alkynylsilanes with aryl bromides confirmed that the trimethylsilyl bromide generated in situ retarded both transmetalation steps between CuCl and alkynylsilane, and between palladium(II) species formed by oxidative addition and alkynylcopper species.     

Expanded scope of heterocyclic biaryl synthesis via a palladium-catalysed thermal decarboxylative cross-coupling reaction

The palladium-catalysed decarboxylative cross-coupling of heterocyclic aromatic carboxylates and aryl halides is described. The cross-coupling proceeds under relatively mild conditions using catalytic Pd(0) and tetrabutylammonium bromide (TBAB). Utilizing a mixed solvent system consisting of N,N-dimethylformamide (DMF) and N-methyl-2-pyrrolidone (NMP), the cross-coupling system operated at temperatures ranging from 80 to 140 °C.     

Solvent free,N,N′-carbonyldiimidazole (CDI) mediated amidation

The method involves CDI mediated amidation under solvent-free conditions. The protocol is green, simple, and scalable and has broad structural applicability. The protocol has also been used for BOC protection of amine. The protocol has reduced the time for CDI mediated amidation from 2–4 h to 5–10 min without the use of any dry organic solvent and nitrogen atmosphere.     

Solubility of terephthalic acid in aqueous acetic acid from 423.15 to 513.15 K

Using the steady-state method, the solubilities of terephthalic acid(1) in binary acetic acid(2) + water(3) solvent mixtures in a specially contrived vessel have been measured as a function of temperature in the temperature range 423.15–513.15 K and solvent composition range from x₂ = 1.000 to 0.3103 (molar fraction). The experimental solubilities are correlated with the Apelblat equation. The calculated results show good agreement with the experimental solubilities.     

Enantioselective 1,4-conjugate addition of diethylzinc to (E)-alkenyl aryl ketones catalysed by Cu/DiPPAM complex

We report here the use of the DiPPAM-L1 ligand for copper-catalysed asymmetric conjugate addition (ACA) of diethylzinc to various (E)-alkenyl aryl ketones where the aryl ring is either a phenyl group substituted by nitro, chloro or methoxy groups or not substituted, or a naphthyl group. When the conjugate addition was performed in the greener AcOEt solvent with 1 or 2 mol % of Cu(OTf)₂/DiPPAM complex, moderate to good yields (45–83%) and high enantioselectivities (up to 98%) were reached.     

General and highly efficient fluorinated-N-heterocyclic carbene–based catalysts for the palladium-catalyzed Suzuki–Miyaura reaction

A general and highly efficient trifluoromethylated-N-heterocyclic carbene (NHC)-based catalyst for the palladium-catalyzed Suzuki–Miyaura reaction was reported. In the presence of the catalyst, reactions of non-activated aryl chlorides and triflates with aryl boronic acids occurred at room temperature with good to excellent yields (63–98%). In addition, catalysts generated from a combination of Pd(OAc)₂/imidazolium salt 6a is not only effective for the coupling of heteroaryl boronic acid with aryl halides and heteroaryl halides, but also efficient for coupling of other heteroaryl halides and heteroaryl boronic acids. Finally, the catalyst is highly effective for Suzuki–Miyaura reaction of aryl bromides and chlorides with 0.01–0.1 mol % loading if the temperature was raised at refluxed THF/H₂O.     

Automated on-line dispersive liquid–liquid microextraction based on a sequential injection system

A novel approach for sequential injection-dispersive liquid–liquid microextraction (SI-DLLME) has been suggested. The method is based on the aspiration and mixing of a sample and all required aqueous reagents in the holding coil of an SIA system, delivering it into a conical tube and adding in a mixture of extraction solvent, auxiliary solvent and disperser solvent at high flow rate, resulting in the formation of a cloudy state and the extraction of an analyte. The mixture of extraction and auxiliary solvent is immiscible with water and has a density significantly higher than that of water; consequently, the resulting fine droplets in the mixture, which contain the extracted analyte, are self-sedimented in a short time at the bottom of conical tube. Thus, no centrifugation and no use of a microcolumn are required for separation of the extraction phase. Afterwards, the extracted analyte is aspirated and transferred to a micro-volume Z-flow cell, and the absorbance is measured.The performance of the suggested approach is demonstrated by the SI-DLLME of thiocyanate ions in the form of ion associate with dimethylindocarbocyanine reagent, followed by spectrophotometric detection. A mixture of amyl acetate (as extraction solvent), tetrachloromethane (as auxiliary solvent) and acetonitrile (as disperser solvent) was selected for the DLLME procedure. The appropriate experimental conditions for conventional DLLME and automated SI-DLLME were investigated. The analytical performance of both these procedures was compared. The absorbance of the colored extracts at wavelength 555 nm obeys Beer's law in the range of 3.13–28.2 for conventional DLLME and 0.29–5.81 mg L^? 1 of SCN for SI-DLLME, and the limit of detection, calculated from a blank test based on 3 s, is 0.110 for conventional DLLME and 0.017 mg L^? 1 for SI-DLLME.     

Bromodimethylsulfonium bromide (BDMS) catalyzed synthesis of imidazo[1,2-a]pyridine derivatives and their fluorescence properties

A convenient synthetic protocol for the synthesis of imidazo[1,2-a]pyridine has been developed by employing one-pot three-component Ugi reaction by employing aromatic amidine, aromatic aldehyde, and isocyanide using 5 mol % of bromodimethylsulfonium bromide (BDMS) at room temperature. In addition, they also exhibit interesting fluorescence properties, which may be useful for fluorescent probe. Mild reaction conditions, non-aqueous work-up procedure, good yields, short reaction time, and no need of chromatographic separation are some of the salient features of the present protocol.     

Catalytic asymmetric carbon–carbon bond forming reactions catalyzed by tetrahydroisoquinoline (TIQ) N,N′-dioxide ligands

The use of TIQ-N,N′-dioxide ligands in asymmetric C–C bond forming reactions is described. In the Michael addition of cyclohexane-1,3-dione and malonates to β,γ-unsaturated α-ketoesters, excellent yields (up to 93%) and moderate to good enantioselectivities (70–89% ee) were obtained. The catalytic hetero-ene reaction of 2-methoxypropene with phenylglyoxal gave the ene product in excellent yield (95%) with moderate enantioselectivity (77% ee). The catalyst system performed well at temperatures ranging from 0 to 30 °C and relatively low catalyst loading (0.2–5 mol %) with dichloromethane being the preferred solvent for all reactions.     

Phase diagrams of binary systems containing n-alkanes,or cyclohexane,or 1-alkanols and 2,3-pentanedione at atmospheric and high pressure

Phase equilibria, for the binary systems {n-alkanes (tridecane, octadecane, or eicosane), or cyclohexane, or 1-alkanol (1-hexadecanol, or 1-octadecanol, or 1-eicosanol) + 2,3-pentanedione} have been determined using a cryometric dynamic method at atmospheric pressure. The influence of pressure on liquidus curve up to 800 MPa was determined for (tridecane, or cyclohexane + 2,3-pentanedione) systems. A thermostated apparatus for the measurements of transition pressures from the liquid to the solid state in two component isothermal solutions (pressometry) was used. The freezing and melting temperatures at a constant composition increase monotonously with pressure. The high-pressure experimental results obtained at isothermal conditions (p–x) were interpolated to well known T–x diagrams.Immiscibility in the liquid phase was observed only for the n-alkanes mixtures. The solubility decreases with an increase of the number of carbon atoms in the n-alkane, or 1-alkanol chain. The higher intermolecular solute–solvent interaction was observed for the 1-alkanols.Experimental solubility results are compared with values calculated by means of the NRTL equation (n-alkanes) and the NRTL and UNIQUAC ASM equations utilizing parameters derived from SLE and LLE results. The existence of a solid–solid first-order phase transition in tridecane, eicosane and 1-alkanols has been taken into consideration in the calculations. The correlation of the solubility data has been obtained with the average root-mean-square deviation of temperature σ < 1.0 K with both equations. The pressure–temperature–composition relation of the high-pressure (solid + liquid) phase equilibria, was satisfactorily presented by the polynomial.     

Experimental measurement and modelling of KBr solubility in water,methanol, ethanol,and its binary mixed solvents at different temperatures

A simple and accurate apparatus has been designed to measure the solubilities of potassium bromide by an analytical method. Salt solubility data have been measured in water, methanol, ethanol, (water  +  methanol), (water  +  ethanol), and (methanol  +  ethanol) solvents in the temperature range between 298.15 K and 353.15 K.A new formulation is presented for the calculation of salt solubility in pure and mixed solvents as a function of the temperature and solvent composition. This formulation is based on the symmetric convention for the normalization of the activity coefficients for all species in solution, and makes possible direct access to the solubility product of the salt in terms of its thermodynamic properties. The new solubility data measured in this work, as well as experimental information from the open literature, are used to estimate the interaction parameters of the two models proposed here. One model combines the original Universal Quasi Chemical (UNIQUAC) equation with a Pitzer–Debye–Hückel expression to take into account the long-range interaction forces; the other model only considers the short-range forces through the UNIQUAC equation with linear temperature dependent salt/solvent interaction parameters. Both models correlate satisfactorily the solubility data, although temperature and electrostatic effects are both very important in this type of equilibrium. Finally, some conclusions are drawn concerning the models versatility to represent other type of equilibrium data and prediction capabilities.     

Pd-catalyzed asymmetric alternating co-polymerization of propene with carbon monoxide using ionic liquids

A protocol for Pd-catalyzed stereoselective co-polymerization of propene and carbon monoxide using chiral ligands, such as (2S,3S)-DIOP and (R)-P-Phos in [C₄mim][PF₆]/[C₆mim][PF₆] as an ionic liquid medium was developed. With (2S,3S)-DIOP as chiral ligand and [C₄mim][PF₆] as medium, the Pd-catalyzed co-polymerization of propene and CO gave almost completely regioregular polyketones, and the product polymer showed moderate stereoregularity (61% of ℓ-diads). The highest molar optical rotation = +15.9 and polydispersity = 1.2 were attained when (R)-P-Phos was used as the ligand and [C₆mim]PF₆ as the solvent. The co-polymer exhibited regioregularity of H–H/H–T/T–T (%) = 17:66:17.     

Determination of erythromycins in fermentation broth using liquid phase extraction with back extraction combined with high performance liquid chromatography

Liquid phase extraction with back extraction (LPE-BE) combined with high performance liquid chromatography-diode array detection (HPLC-DAD) was applied for the extraction and determination of erythromycin A, B and C in fermentation broths. According to this procedure, the fermentation broth with the adjustment pH at a fixed value of 10 was first mixed with organic solvent (V_broth/V_org = 1.0). After shaking, the mixture was separated into two phases by microfuging at 13,000 rpm for 15 min. Then back extraction was performed into the acidic aqueous phase with pH 5.0 (V_org/V_aq = 1.0). After centrifugation at 3000, the two phases were separated and 50 μL of the acidic aqueous phase was injected into the HPLC. The effects of different variables such as the nature of extraction solvent and the pH of samples and buffer were investigated. At the most appropriate conditions, dynamic linear ranges of 0.5–8, 0.1–0.9 and 0.1–0.9 mg mL⁻¹ and limits of detection of 0.03, 0.003 and 0.002 mg mL⁻¹ were obtained for erythromycin A, B and C, respectively. Relative standard deviations (RSDs) of the proposed method were less than 9.5%. The mean recoveries were 99.5%. The proposed method is simple and sensitive with highly clean-up effect and it can be used for monitoring the progress of erythromycin fermentation.     

(Solid + liquid) phase equilibria of binary mixtures containing N-methyl-2-pyrrolidinone and ethers at atmospheric pressure

Solid–liquid equilibria (SLE), have been measured from 270 K to the boiling temperature of the solvent for 10 binary mixtures of N-methyl-2-pyrrolidinone, with ethers (dipropyl ether, dibutyl ether, dipentyl ether, methyl 1,1-dimethylethyl ether, methyl 1,1-dimethylpropyl ether, ethyl 1,1-dimethylpropyl ether, 1,4-dioxane, tetrahydrofuran, tetrahydropyran, 18-crown-6) using a dynamic method. The solubility of N-methyl-2-pyrrolidinone in ethers is lower than in alcohols and generally decreases with an increase of the number of carbon atoms of ether chain. The highest intermolecular solute–solvent interaction is observed for the cyclic ethers and for methyl 1,1-dimethylethyl ether.Experimental solubility results are compared with values calculated by means of the Wilson, UNIQUAC ASM and two NRTL equations utilizing parameters derived from SLE results. The existence of a solid–solid first-order phase transition in 18-crown-6 ether has been taken into consideration in the calculations. The correlation of the solubility data has been obtained with the average root-mean-square deviation of temperature σ_T = 0.9 K with UNIQUAC ASM and two NRTL equations and 0.6 K with the Wilson equation.     

Volumetric and viscometric studies of urea in binary aqueous solutions of glucose at different temperatures

Densities and viscosities of urea in (1.0, 2.5, and 5.0) mass% of aqueous glucose solutions have been measured at T = (298.15, 303.15, 308.15, and 313.15) K, respectively. Apparent molar volumes, limiting partial molar volume, and relative viscosity have been obtained from the density and viscosity data. Limiting partial molar expansibilities have also been calculated from the temperature dependence of limiting partial molar volumes. The viscosity data has been analyzed using the Jones–Dole equation. The results are used to establish the nature of solute–solute and solute–solvent interactions. The activation parameters of viscous flow have also been calculated on the basis of transition state treatment of the relative viscosity. Result shows that the solute acts as water structure breaker and posses’ weak solute–solvent interaction.     

Volumetric and viscometric studies of glucose in binary aqueous solutions of urea at different temperatures

Densities and viscosities of glucose in (1.0, 2.5, and 5.0) mass% aqueous urea solutions have been measured at T = (298.15, 303.15, 308.15, and 313.15) K, respectively. Apparent molar volumes, limiting partial molar volume, and relative viscosity have been obtained from the density and viscosity results. Limiting partial molar expansibilities have also been calculated from the temperature dependence of limiting partial molar volumes. The viscosity data have been analyzed by using the modified Jones–Dole equation. The results are used to establish the nature of solute–solute and solute–solvent interactions. Transition state treatment of the relative viscosity was also used for the calculation of activation parameters of viscous flow. Pour findings show that the solute acts as a water structure former and provides strong solute–solvent interaction.