Silica‐coated nano‐Fe3O4‐supported iminopyridine palladium complex as an active,phosphine‐free and magnetically separable catalyst for Heck reactions

A novel magnetic nanoparticle‐supported iminopyridine palladium complex was successfully prepared by attaching palladium acetate to iminopyridine ligand‐functionalized silica‐coated nano‐Fe₃O₄. The as‐prepared catalyst was well characterized and was evaluated in Heck reactions in terms of activity and recyclability. It was found to be highly efficient for the reactions of various aryl iodides and aryl bromides having electron‐withdrawing groups with olefins under phosphine‐free and inert atmosphere‐free conditions. Moreover, the catalyst could be conveniently recovered using an external magnet, and the recyclability was influenced by the base in the Heck reaction. The catalyst could be reused at least six times with no significant loss in activity when triethylamine acted as the base.     

Synthesis,characterization and catalytic performance of core‐shell structure magnetic Fe3O4/P(GMA‐EGDMA)‐NH2/HPG‐COOH‐Pd catalyst

A strategy has been developed for the synthesis, characterization and catalysis of magnetic Fe₃O₄/P(GMA‐EGDMA)‐NH₂/HPG‐COOH‐Pd core‐shell structure supported catalyst. The P(GMA‐EGDMA) polymer layer was coated on the surface of hollow magnetic Fe₃O₄ microspheres through the effect of KH570. The core‐shell magnetic Fe₃O₄/P(GMA‐EGDMA) modified by ‐NH₂ could be grafted with HPG. Then, the hyperbranched glycidyl (HPG) with terminal ‐OH were modified by ‐COOH and adsorbed Pd nanoparticles. The hyperbranched polymer layer not only protected the Fe₃O₄ magnetic core from acid–base substrate corrosion, but also provided a number of functional groups as binding sites for Pd nanoparticles. The prepared catalyst was characterized by UV–vis, TEM, SEM, FTIR, TGA, ICP‐OES, BET, XRD, DLS and VSM. The catalytic tests showed that the magnetic Fe₃O₄/P(GMA‐EGDMA)‐NH₂/HPG‐COOH‐Pd catalyst had excellent catalytic performance and retained 86% catalytic efficiency after 8 consecutive cycles.     

Direct catalytic C–H arylation of imidazo[1,2-a]pyridine with aryl bromides using magnetically recyclable Pd–Fe3O4 nanoparticles

The direct C–H arylation of a heteroarene with aryl bromides has been achieved under the catalysis of magnetic nanoparticles. In the presence of bimetallic Pd–Fe₃O₄ heterodimer nanocrystals (1 mol % in palladium), the reaction of imidazo[1,2-a]pyridine with various aryl bromides gives the corresponding arylated products with exclusive C3-selectivity. The highly regioselective method is applicable to a wide range of aryl bromides with varying electronic and steric properties. The Pd–Fe₃O₄ nanocrystals can be recoverable by simple magnetic separation and have been recycled ten times without loss of catalytic activity.     

N‐heterocyclic carbene–palladium(II) complex supported on magnetic mesoporous silica for Heck cross‐coupling reaction

Magnetic mesoporous silica was prepared via embedding magnetite nanoparticles between channels of mesoporous silica (SBA‐15). The prepared composite (Fe₃O₄@SiO₂‐SBA) was then reacted with 3‐chloropropyltriethoxysilane, sodium imidazolide and 2‐bromopyridine to give 3‐(pyridin‐2‐yl)‐1H‐imidazol‐3‐iumpropyl‐functionalized Fe₃O₄@SiO₂‐SBA as a supported pincer ligand for Pd(II). The functionalized magnetic mesoporous silica was further reacted with [PdCl₂(SMe₂)₂] to produce a supported N‐heterocyclic carbene–Pd(II) complex. The obtained catalyst was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray analysis, vibrating sample magnetometry, Brunauer–Emmett–Teller surface area measurement and X‐ray diffraction. The amount of the loaded complex was 80.3 mg g^?1, as calculated through thermogravimetric analysis. The formation of the ordered mesoporous structure of SBA‐15 was confirmed using low‐angle X‐ray diffraction and transmission electron microscopy. Also, X‐ray photoelectron spectroscopy confirmed the presence of the Pd(II) complex on the magnetic support. The prepared magnetic catalyst was then effectively used in the coupling reaction of olefins with aryl halides, i.e. the Heck reaction, in the presence of a base. The reaction parameters, such as solvent, base, temperature, amount of catalyst and reactant ratio, were optimized by choosing the coupling reaction of 1‐bromonaphthalene and styrene as a model Heck reaction. N‐Methylpyrrolidone as solvent, 0.25 mol% catalyst, K₂CO₃ as base, reaction temperature of 120°C and ultrasonication of the catalyst for 10 min before use provided the best conditions for the Heck cross‐coupling reaction. The best results were observed for aryl bromides and iodides while aryl chlorides were found to be less reactive. The catalyst exhibited noticeable stability and reusability.     

Copper(I)–creatine complex on magnetic nanoparticles as a green catalyst for N- and O-arylation in deep eutectic solvent

Immobilization of copper(I) ions on magnetic nanoparticles was performed using surface modification of Fe₃O₄ with creatine. Fe₃O₄@creatine-Cu(I) magnetic catalyst was synthesized and applied in C&bond;X cross-coupling reactions with aryl halides in a deep eutectic as a green solvent. The results indicate the Fe₃O₄@creatine-Cu(I) magnetic nanoparticles showed excellent activity and high stability. In addition, it was revealed that this catalyst can be recycled five times without significant loss in catalytic activity.     

Synthesis and characterization of Fe3O4@SiO2–polymer-imid–Pd magnetic porous nanospheres and their application as a novel recyclable catalyst for Sonogashira–Hagihara coupling reactions

We demonstrate herein the modification of magnetic nanoparticles and their use as a magnetic nanocatalyst in direct coupling reactions of aryl halides with terminal alkynes. Magnetite particles were prepared by simple co-precipitation method in aqueous medium, and then Fe₃O₄@ SiO₂ nanosphere was synthesized by using nano-Fe₃O₄ as the core, TEOS as the silica source and PVA as the surfactant. Fe₃O₄@SiO₂ was coated with polymeric N-heterocyclic carbene/Pd. The samples were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, field emission scanning electron microscopy, dynamic light scattering, thermogravimetric analysis, vibration sample magnetometer and N₂ adsorption–desorption isotherm analysis. Poly (N-vinyl imidazole) functionalized Fe₃O₄@SiO₂ nanoparticle was found to be an efficient nanocatalyst in Sonogashira–Hagihara cross-coupling reactions. The nanocatalyst can be easily recovered by a magnetic field and reused for six runs without appreciable loss of its catalytic activity.     

Copper-catalyzed cross-coupling of sulfonamides with aryl iodides and bromides facilitated by amino acid ligands

A highly general, convenient, and inexpensive catalyst system was developed for the N-arylation of sulfonamides with aryl iodides or bromides by using 5-20 mol % of CuI as catalyst, 20 mol % of N-methylglycine (for aryl iodides) or N,N-dimethylglycine (for aryl bromides) as ligand, and K₃PO₄ as base.     

Nitro group reduction and Suzuki reaction catalysed by palladium supported on magnetic nanoparticles modified with carbon quantum dots generated from glycerol and urea

Glycerol and urea were used as green and cheap sources of carbon quantum dots (CQD) for modifying Fe₃O₄ nanoparticles (NPs). The obtained CQD@Fe₃O₄ NPs were used for the stabilization of palladium species and the prepared catalyst, Pd@CQD@Fe₃O₄, was characterized using various techniques. This magnetic supported palladium was applied as an efficient catalyst for the reduction of aromatic nitro compounds to primary amines at room temperature using very low palladium loading (0.008 mol%) and also for the Suzuki–Miyaura cross‐coupling reaction of aryl halides as well as challenging heteroaryl bromides and aryl diazonium salts with arylboronic acids and with potassium phenyltrifluoroborate. This magnetically recyclable catalyst was recovered and reused for seven consecutive runs in the reduction of 4‐nitrotoluene to p‐toluidine and for ten consecutive runs in the reaction of 4‐iodoanisole with phenylboronic acid with small decrease of activity. The catalyst reused in the Suzuki reaction was characterized using transmission electron microscopy, vibrating sample magnetometry and X‐ray photoelectron spectroscopy. Using experiments such as hot filtration and poisoning tests, it has been shown that the true catalyst works under homogeneous conditions according to the release–return pathway of active palladium species.     

Preparation and characterization of Cu supported on 2-(1H-benzo[d]imidazol-2-yl)aniline-functionalized Fe3O4 nanoparticles as a novel magnetic catalyst for Ullmann and Suzuki cross-coupling reactions

Copper supported on 2-(1H-benzo[d]imidazol-2-yl)aniline (BIA)-functionalized Fe₃O₄ nanoparticles (Cu-BIA-Si-Fe₃O₄) as a novel magnetic catalyst was designed and used for the synthesis of new products via Ullmann and Suzuki cross-coupling reactions. The Ullmann reaction was performed by mixing arylboronic acid with aniline derivatives in dimethylsulfoxide solvent. Also, diaryls were synthesized via Suzuki C–C reactions between aryl halides and phenylboronic acid in the same solvent. The prepared materials and catalyst were characterized with various analytical techniques. The Cu-BIA-Si-Fe₃O₄ catalyst demonstrated catalytic efficiency with good to excellent yields for both types of reactions in comparison with commercial palladium catalysts. Also, the catalyst could be recovered by a simple filtration and retained its activity even after several cycles.     

Facile preparation of highly stable and active hybrid palladium nanoparticles: effectual,reusable and heterogeneous catalyst for coupling reactions

Palladium nanoparticles were supported on a bed of Fe₃O₄@‐NH₂@Murexide using a simple and efficient method, and characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, scanning and transmission electron microscopies and inductively coupled plasma optical emission spectrometry. The catalytic system showed great efficiency in cross‐coupling reaction of aryl iodides and arylboronic acid and in Sonogashira cross‐coupling reaction in the green solvent EtOH–H₂O (1:1). The isolation and recovery of the catalyst were simple and facile and it could be used for several successive Suzuki–Miyaura coupling and Sonogashira cross‐coupling reactions. Copyright © 2016 John Wiley & Sons, Ltd.     

3-Amino-5-mercapto-1,2,4-triazole-functionalized Fe3O4 magnetic nanocomposite as a green and efficient catalyst for synthesis of bis(indolyl)methane derivatives

A core–shell Fe₃O₄@silica magnetic nanocomposite functionalized with 3-amino-5-mercapto-1,2,4-triazole (Fe₃O₄/SiO₂/PTS/AMTA) was prepared using Fe₃O₄ with silica layer, and its surface was modified with 3-amino-5-mercapto-1,2,4-triazole. The novel synthesized magnetite nanocomposite was characterized using various techniques. The catalytic activity of Fe₃O₄/SiO₂/PTS/AMTA was demonstrated in the synthesis of bis(indolyl)methane derivatives under solvent-free conditions. Some of the bis(indolyl)methane derivatives were synthesized through one-pot, three-component reaction of 1 mol of various benzaldehydes or ketones with 2 mol of indole in the presence of Fe₃O₄/SiO₂/PTS/AMTA in good to excellent isolated yields. In addition, the catalyst could be recovered and used for several reaction runs without loss of catalytic activity. The stability of recycled catalyst was investigated. This method has some advantages including experimental simplicity, good to excellent yields, solvent-free conditions and stability and reusability of the catalyst.     

In Situ Confined Growth Based on a Self‐Templating Reduction Strategy of Highly Dispersed Ni Nanoparticles in Hierarchical Yolk–Shell Fe@SiO2 Structures as Efficient Catalysts

Ni‐based magnetic catalysts exhibit moderate activity, low cost, and magnetic reusability in hydrogenation reactions. However, Ni nanoparticles anchored on magnetic supports commonly suffer from undesirable agglomeration during catalytic reactions due to the relatively weak affinity of the magnetic support for the Ni nanoparticles. A hierarchical yolk–shell Fe@SiO₂/Ni catalyst, with an inner movable Fe core and an ultrathin SiO₂/Ni shell composed of nanosheets, was synthesized in a self‐templating reduction strategy with a hierarchical yolk–shell Fe₃O₄@nickel silicate nanocomposite as the precursor. The spatial confinement of highly dispersed Ni nanoparticles with a mean size of 4 nm within ultrathin SiO₂ nanosheets with a thickness of 2.6 nm not only prevented their agglomeration during catalytic transformations but also exposed the abundant active Ni sites to reactants. Moreover, the large inner cavities and interlayer spaces between the assembled ultrathin SiO₂/Ni nanosheets provided suitable mesoporous channels for diffusion of the reactants towards the active sites. As expected, the Fe@SiO₂/Ni catalyst displayed high activity, high stability, and magnetic recoverability for the reduction of nitroaromatic compounds. In particular, the Ni‐based catalyst in the conversion of 4‐nitroamine maintained a rate of over 98 % and preserved the initial yolk–shell structure without any obvious aggregation of Ni nanoparticles after ten catalytic cycles, which confirmed the high structural stability of the Ni‐based catalyst.     

Synthesis and characterization of Pd(II)–vitamin B6 complex supported on magnetic nanoparticle as an efficient and recyclable catalyst system for C–N cross coupling of amides in deep eutectic solvents

Vitamin B₆–Pd(II) immobilized onto magnetic nanoparticles have been successfully prepared and applied for C–Xcross-coupling reactions with aryl halides in green deep eutectic solvents. The results prove that the Fe₃O₄@vitamin B₆–Pd(II) magnetic nanoparticles show high catalyst activity and good stability. It was also revealed that this complex can be recycled up to five times without any significant loss in catalytic activity.     

Fe3O4‐SAHPG‐Pd0 nanoparticles: A ligand‐free and low Pd loading quasiheterogeneous catalyst active for mild Suzuki–Miyaura coupling and C?H activation of pyrimidine cores

This paper reports a green magnetic quasiheterogeneous efficient palladium catalyst in which Pd⁰ nanoparticles have been immobilized in self‐assembled hyperbranched polyglycidole (SAHPG)‐coated magnetic Fe₃O₄ nanoparticles (Fe₃O₄‐SAHPG‐Pd⁰). This catalyst has been used for effective ligandless Pd catalyzed Suzuki–Miyaura coupling reactions of different aryl halides with substituted boronic acids at room temperature and in aqueous media. Herein, SAHPG is used as support; it also acts as a reducing agent and stabilizer to promote the transformation of Pd^II to Pd⁰ nanoparticles. Also, this environmental friendly quasiheterogeneous catalyst is employed for the first time in the synthesis of new pyrimido[4,5‐b]indoles via oxidative addition/C? H activation reactions on the pyrimidine rings, which were obtained with higher yield and faster than when Pd(OAc)₂ was used as the catalyst. Interestingly, the above‐mentioned catalyst could be recovered in a facile manner from the reaction mixture by applying an external magnet device and recycled several times with no significant decrease in the catalytic activity.     

Preparation and characterization of palladium immobilized on silica‐coated Fe3O4 and its catalytic performance for Suzuki reaction under microwave irradiation

Supported palladium catalyst (Pd/Fe₃O₄@SiO₂) was easily prepared by supporting PdCl₂ on silica‐coated magnetic nanoparticles Fe₃O₄ in ethylene glycol. The as‐prepared sample was characterized by infrared spectroscopy (IR), X‐ray diffraction (XRD) and X‐ray photoelectron spectrometer (XPS). The formation of active specie Pd(0) was confirmed by XRD and XPS, and the Pd loading for the fresh and recovered catalyst was determined by atomic absorption spectroscopy (AAS). Pd/Fe₃O₄@SiO₂ was employed for the synthesis of biphenyl derivatives via Suzuki reaction. In terms of the yield of biphenyl, the supported catalyst displayed nearly equal catalytic performance to that of homologous PdCl₂ under microwave irradiation for 30 min but higher than that obtained by traditional heating method for 12 h. The catalytic performance of Pd/Fe₃O₄@SiO₂ for Suzuki reactions involving various aryl halides and arylboronic acids were also examined. Impressive yield of biphenyl at 68.2% was obtained even in the presence of unreactive aryl chlorides. Pd/Fe₃O₄@SiO₂ was recovered by a permanent magnet and directly reused in the next run, and no obvious deactivation was observed for up to 6 times. Copyright © 2016 John Wiley & Sons, Ltd.     

Palladium-catalyzed hydrodehalogenation of aryl halides using paraformaldehyde as the hydride source: high-throughput screening by paper-based colorimetric iodide sensor

Paraformaldehyde was employed as a hydride source in the palladium-catalyzed hydrodehalogenation of aryl iodides and bromides. High throughput screening using a paper-based colorimetric iodide sensor (PBCIS) showed that Pd(OAc)₂ and Cs₂CO₃ were the best catalyst and base, respectively. Aryl iodides and bromides were hydrodehalogenated to produce the reduced arenes using Pd(OAc)₂ and Pd(PPh₃)₄ catalyst. This catalytic system showed good functional group tolerance. In addition, it was found that paraformaldehyde is the hydride source and the reducing agent for the formation of palladium nanoparticles.     

Palladium nanoparticles supported on SiO2 by chemical vapor deposition (CVD) technique as efficient catalyst for Suzuki–Miyaura coupling of aryl bromides and iodides: selective coupling of halophenols

Nanoparticles of palladium were supported on SiO₂ by chemical vapor deposition technique. The obtained Pd nanocatalyst was characterized by various techniques. This catalyst was found to be very efficient for the selective cross‐coupling of hydroxyl‐substituted aryl iodides and bromide with arylboronic acids in water at room temperature to produce the corresponding hydroxyl‐substituted biaryls. Coupling of phenylboronic acid with aryl iodides and bromides carrying substituents other than hydroxy group was also performed efficiently in refluxing ethanol. Copyright © 2012 John Wiley & Sons, Ltd.     

A new palladium complex supported on magnetic nanoparticles and applied as an catalyst in amination of aryl halides,Heck and Suzuki reactions

A simple, efficient and less expensive protocol for the phosphine-free C–C coupling reactions and synthesis of anilines in the presence of 2-aminobenzamide complex of palladium supported on Fe₃O₄ magnetic nanoparticles (Pd(0)-ABA-Fe₃O₄) has been reported. The Suzuki reaction was carried out in water or PEG using phenylboronic acid (PhB(OH)₂) or sodium tetraphenyl borate (NaBPh₄). Pd(0)-ABA-Fe₃O₄ has been found promising for Heck reaction of butyl acrylate, styrene or acrylonitrile with aryl halides (including Cl, Br and I). Also, Pd(0)-ABA-Fe₃O₄ has been found as efficient catalyst for the amination of aryl halides using aqueous ammonia. The products have been obtained in short reaction times and high yields. The catalyst was easily separated using an external magnet from the reaction mixture and reused for several runs without significant loss of its catalytic efficiency or palladium leaching. The leaching of catalyst has been examined by hot filtration and ICP-OES technique. The nanomagnetical catalyst was characterized by FTIR, TGA, XRD, VSM, TEM, SEM, EDS, DLS and ICP-OES techniques.     

A highly active palladium(II)–bis(oxazoline) catalyst for Suzuki–Miyaura,Mizoroki–Heck and sonogashira coupling reactions in aqueous dimethylformamide

An efficient catalytic system based on a new palladium–bis(oxazoline) ( Pd-BOX-1 ) complex has been developed. The complex Pd-BOX-1 adopts a legless chair‐type structure where the distorted square planar [PdN₂Cl₂] moiety and the benzene ring spacer represent the seat and the chair back, respectively. The catalytic activity of Pd-BOX-1 has been investigated in dimethylformamide–water under aerobic and mild conditions in Suzuki–Miyaura coupling reactions of arylboronic acids with aryl iodides, aryl bromides and aryl chlorides, Mizoroki–Heck coupling reactions of aryl halides with styrene derivatives, and Sonogashira coupling reactions of aryl halides with terminal alkynes. A wide range of functional groups as substituents on the arylboronic acids and aryl halides were considered. Pd-BOX-1 demonstrates exceptional air and moisture stability. Of note, the catalyst system based on Pd-BOX-1 shows high recycling ability in Suzuki–Miyaura coupling reactions in dimethylformamide–water without any loss in catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Diphenylphosphorylated PEG (DPPPEG) as a new support for generation of nano-Pd(0) as catalyst for carbon–carbon bond formation via copper-free Sonogashira and homocoupling reactions of aryl halides in PEG

In this study, synthesis and application of diphenylphosphorylated PEG₂₀₀ (DPPPEG₂₀₀) are described. Herein, we report a very simple procedure for the preparation of DPPPEG₂₀₀ as a stable solid through the reaction of PEG₂₀₀ with ClPPh₂. This compound was used as a very suitable ligand for the in situ generation of nano-Pd(0) particles through its reaction with PdCl₂ as a pre-catalyst. Isolation of this catalyst is very simple through addition of diethyl ether to the reaction mixture and centrifugations. Full characterization of the nano-Pd(0)/DPPPEG200 was performed by XRD spectra, UV–Vis spectra, and also by TEM image. This nano-complex was used as an efficient catalyst for copper-free Sonogashira and homocoupling reactions of aryl halides. The sonogashira reaction of aryl halides was conducted at 80 °C in PEG. However, the homocoupling reaction was performed at 100 °C for aryl iodides and activated aryl bromides and at 130 °C for deactivated aryl bromides and aryl chlorides in PEG. The catalyst was recovered and recycled for four consecutive runs.