Remote stereocontrol by the sulfinyl group. Diels–Alder reaction of cyclopentadiene with substituted (S)-[2-(p-tolylsulfinyl)styrenes and (S)-[2-(p-tolylsulfinyl)phenyl] vinyl ketones

The ability of a homochiral sulfinyl group at the dienophile to act as a remote stereocontrol inductor in the Diels–Alder reaction with cyclopentadiene has been evaluated. High pressure conditions were required for the reactions of (S)-2-(p-tolylsulfinyl)styrenes 3–5 (E-1,2-disubstituted double bond) and 6–8 (1,1-disubstituted double bond). A good facial selectivity and total endo selectivity were attained with 1,1-disubstitued dienophiles, though the 1,2-disubstituted ones afforded poorer results. In contrast, (S)-[2-(p-tolylsulfinyl)phenyl] vinyl ketones 9–11 reacted readily at low temperature (?40 °C) with complete endo selectivity and high facial selectivity in the presence of Yb(OTf)₃ as a chelating reagent of sulfinyl and carbonyl oxygen atoms. Concerning furan reactions, β-trifluoromethyl enone 14 afforded Diels–Alder adducts with high facial selectivity in the presence of the Lewis acid, but β-non-substituted enones 9 and 12 yielded products of furan conjugate addition to the double bond.     

Determination of Manganese (II) in Foodstuffs by β-Cyclodextrin Polymer Phase Spectrophotometry with 1-(2-Pyridylazo)-2-naphthol

The chromogenic agent, 1-(2-pyridylazo)-2-naphthol (PAN) was included in g -Cyclodextrin polymer ( g -CDP) and the modified polymer of inclusion of PAN ( g -CDP-PAN) was obtained. Based on the fact that g -CDP-PAN can adsorb Mn (II) in solution to form Mn (II)-PAN complex, a sensitive and selective solid phase spectrophotometric method for the determination of trace amounts of Mn (II) has been developed. The maximum absorbance of Mn (II)-PAN complex in g -CDP was at 514 nm. The working range of the calibration graph was 2-12 w g of Mn (II). The interference of molybdenum, lead, cobalt, chromium, iron, nickel, zinc, tin, cadmium, and copper that form colored species with PAN in the polymer phase was investigated. The method was applied to the determination of Mn (II) in black rice and tea samples. A new method for the determination of trace amounts of manganese by polymer phase spectrophotometry is described. Manganese reacted with 1-(2-pyridylazo)-2-naphthol (PAN) that was included in a g -cyclodextrin polymer. The absorbance of the colored polymer, packed into a 5 mm quartz cell, was determined directly at 514 nm. The proposed method was applied to the determination of manganese in black rice and tea samples.     

Solvent Extraction–Photometric Determination of Palladium Using Complexation with 1-(2-Pyridylazo)-2-Naphthol

Palladium(II) complexation with 1-(2-pyridylazo)-2-naphthol (PAN) in aqueous solutions followed by extraction with chloroform and photometric detection was studied. The best conditions were found for the formation of the complex in an aqueous solution and for its extraction with chloroform that provided a sufficient degree of binding palladium ions. The stability constant of the complex cation PdX⁺, which is extracted by chloroform as an ion pair [PdX]⁺[An^–] (An^–– CH₃COO^–), was calculated using the methods proposed by Rossotti (log K _stab= 18.73) and Komar' (log K _stab= 18.82). The equilibrium constant of the complexation reaction was also calculated (5.45 × 10⁴). It was shown that components of nonferrous alloys affect the determination of palladium by photometry as its complex or ion pair with PAN in chloroform.     

Enantioselective Diels–Alder reactions of chiral racemic acyclic dienes with (SS)-2-(p-tolylsulfinyl)-1,4-naphthoquinone

Enantiopure sulfinylnaphthoquinone (+)-1 reacted with racemic acyclic dienes 2a–f bearing a stereogenic allylic center, through a tandem cycloaddition/pyrolytic sulfenic acid elimination, to afford enantio-enriched compounds 4a–f and 5a–f with good like:unlike selectivities (ca. 75:25) and good enantiomeric excesses (68–82%), arising from the partial kinetic resolution of the racemic dienes.     

Study of cis–trans stereochemistry of 2-(2-chlorobenzylideneamino)phenol and 2-(2-chlorophenyl imino)methyl)phenol (Schiff bases) by GC and GC-MS spectrometry

Cis–trans stereochemistry of 2-(2-chlorobenzylideneamino)phenol (1) and 2-(2-chlorophenyl imino)methyl)phenol (2) (Schiff bases) was studied by GC-MS spectrometry, and cis–trans conversion of the two compounds in solution was investigated by GC. Thus, 2 exists as a sole trans configuration and its conversion to cis was unsuccessful in any circumstance, while compound 1 exists as a mixture of two configurations in solution, occurrence of which were dependent on the temperature, heating time, solvent, and acid catalyst. X-ray crystallography of solid 1 presented a sole trans configuration.     

Sensitive determination of fluoride in biological samples by gas chromatography–mass spectrometry after derivatization with 2-(bromomethyl)naphthalene

A gas chromatography–mass spectrometric method was developed in this study in order to determine fluoride in plasma and urine after derivatization with 2-(bromomethyl)naphthalene. 2-Fluoronaphthalene was chosen as the internal standard. The derivatization of fluoride was performed in the biological sample and the best reaction conditions (10.0 mg mL⁻¹ of 2-(bromomethyl)naphthalene, 1.0 mg mL⁻¹ of 15-crown-5-ether as a phase transfer catalyst, pH of 7.0, reaction temperature of 70 °C, and heating time of 70 min) were established. The organic derivative was extracted with dichloromethane and then measured by a gas chromatography–mass spectrometry. Under the established condition, the detection limits were 11 μg L⁻¹ and 7 μg L⁻¹ by using 0.2 mL of plasma or urine, respectively. The accuracy was in a range of 100.8–107.6%, and the precision of the assay was less than 4.3% in plasma or urine. Fluoride was detected in a concentration range of 0.12–0.53 mg L⁻¹ in six urine samples after intake of natural mineral water containing 0.7 mg L⁻¹ of fluoride.     

Comeplexes of 1-(2′-hydroxybenzyl)-2-(2′-hydroxyphenyl)-benzimidazole with U(VI) and Ce(IV)

Some new U(VI) and Ce(IV) complexes of 1-(2′-hydroxybenzyl)-2-(2′-hydroxyphenyl)-benzimidazole have been prepared and characterized by spectrg magnetic and conductance studies. IR spectral data suggests that the ligand in all the complexes is monodenate through the tertiary nitrogen and that the phenolic oxygen is free from coordination. Conductivity measurements indicate that the nitrate and acetate complexes of U(VI) are non-electrolytes, whereas the nitrate complex of Ce(IV) is a 1:1 electrolyte.     

Easy preparation of 1,4,5-trisubstituted 5-(2-alkoxy-1,2-dioxoethyl)-1,2,3-triazoles by chemoselective trapping of copper(I)–carbon bond with alkoxalyl chloride

We found that alkoxalyl chloride (ClCOCO₂R) did not carry out an acylation on 1-copper(I) alkyne in solvent without additives, but chemoselectively on 5-copper(I) 1,2,3-triazole (an intermediate in cycloaddition of 1-copper(I) alkyne and azide). Thus, a one-pot preparation of 1,4,5-trisubstituted 5-(2-alkoxy-1,2-dioxoethyl)-1,2,3-triazole was achieved by simply stirring the mixture of 1-copper(I) alkyne, azide, and alkoxalyl chloride at room temperature for 4 h.     

Photoprotection of wool with sulfonated 2-(2′-hydroxyaryl)-2H-benzotriazoles

A range of phenolic benzotriazolesulfonic acids containing a wide variety of substituents has been synthesized. These compounds protect wool to a significant extent against photo-tendering and, in some cases, against photo-yellowing. The protective effect is dependent on the nature and position of the substituents and is enhanced by (1) locating the sulfonic acid group distant from the hydrogen-bonded phenolic group and (2) placing bulky alkyl groups ortho to this phenolic group. The protective effect of one of the best photostabilizers (II) has been studied in detail and has been found to depend on both the concentration of the photostabilizer and the pH at which it is applied. The photostabilizer (II) also protects dyed wool to some extent against photo-fading as well as against phototendering.     

U(VI) adsorption by biochar fiber–MnO2 composites

The removal of U(VI) by biochar fibers from aqueous solutions has been investigated prior and after MnO₂ surface-deposition. The removal efficiency has been studied as a function of pH, U(VI) concentration, ionic strength, temperature and contact time. The fibers morphology and surface complexes were analyzed by SEM–EDX and FTIR, respectively. Evaluation of the experimental data indicates that the composite presents extraordinary adsorption capacity (q_max = 3.8 mmol g⁻¹, 904 mg g⁻¹), which is attributed to the formation of inner-sphere surface complexes, and that the adsorption reaction is a relatively fast, endothermic and entropy-driven process.

     

Ultra-sensitive determination of cyanide in surface water by gas chromatography–tandem mass spectrometry after derivatization with 2-(dimethylamino)ethanethiol

A gas chromatography–tandem mass spectrometric (GC–MS/MS) method has been established for the determination of cyanide in surface water. This method is based on the derivatization of cyanide with 2-(dimethylamino)ethanethiol in surface water. The following optimum reaction conditions were established: reagent dosage, 0.7 g L⁻¹ of 2-(dimethylamino)ethanethiol; pH 6; reaction carried out for 20 min at 60 °C. The organic derivative was extracted with 3 mL of ethyl acetate, and then measured by using GC–MS/MS. Under the established conditions, the detection and quantification limits were 0.02 μg L⁻¹ and 0.07 μg L⁻¹ in 10-mL of surface water, respectively. The calibration curve had a linear relationship relationship with y = 0.7140x + 0.1997 and r² = 0.9963 (for a working range of 0.07–10 μg L⁻¹) and the accuracy was in a range of 98–102%; the precision of the assay was less than 7% in surface water. The common ions Cl⁻, F⁻, Br⁻, NO₃⁻, SO₄²⁻, PO₄³⁻, K⁺, Na⁺, NH₄⁺, Ca²⁺, Mg²⁺, Ba²⁺, Mn⁴⁺, Mn²⁺, Fe³⁺, Fe²⁺ and sea water did not interfere in cyanide detection, even when present in 1000-fold excess over the species. Cyanide was detected in a concentration range of 0.07–0.11 μg L⁻¹ in 6 of 10 surface water samples.     

Synthesis of 1-(2-Oxoalkyl)-2-acyltetrahydro-isoquinolines by α-Amidoalkylation of Methylene Active Carbonyl Compounds with N-Acyliminium Intermediates

Intermolecular α-amidoalkylation reaction of methylene active carbonyl compounds with N-acyliminium salts of 3,4-dihydroisoquinolines and acyl chlorides has been used for synthesis of 1-(2-oxoalkyl)-2-acyltetrahydroisoquinolines.     

Highly diastereoselective vinylogous Mukaiyama aldol reaction of α-keto phosphonates with 2-(trimethylsilyloxy)furan catalyzed by Cu(OTf)2

The diastereospecific formation of δ-hydroxyalkylbutenolide phosphonate has been achieved via a vinylogous Mukaiyama aldol reaction. The reaction was performed using α-ketophosphonate 1 and 2-(trimethylsilyloxy)furan 2 mediated by Cu(OTf)(2) and 2,2,2-trifluoroethanol as additive in CH(2)Cl(2). The reaction proceeds rapidly and affords the corresponding 5-(hydroxy(aryl)methyl) furan-2(5H)-one phosphonates 3 in high yields with good to excellent diastereoselectivities (d.r. up to >99?:?1). 5-(Hydroxy(alkyl)methyl)furan-2(5H)-one phosphonates could also be obtained with good diastereoselectivities.     

A silver(I)–rhodium(I) cooperative catalysis in the reaction of N′-(2-alkynylbenzylidene)hydrazide with 2-vinyloxirane

A novel and efficient route to H-pyrazolo[5,1-a]isoquinoline-1-carbaldehydes via a tandem reaction of N′-(2-alkynylbenzylidene)hydrazide with 2-vinyloxirane is described. The reaction proceeds through a silver(I)–rhodium(I) cooperative catalysis.     

Photo-epoxidation of (α, β)-pinene with molecular O2 catalyzed by a dioxo-molybdenum (VI)-based Metal–Organic Framework

Research on Chemical Intermediates - A gallium-based metal–organic framework, post-modified with MoO2Cl2, was examined as a catalyst for the room temperature liquid-phase photooxidation of...     

Adsorptive Voltammetric Measurement of Trace Level of Iron(III) with 4–(2–Pyridylazo) Resorcin

Abstract

The polarographic behavior of the complex of iron–4– (2–pyridylazo) resorcin(PAR) was studied. In HAc– NaAc– EDTA buffer solution, the complex can be adsorped on a hanging mercury drop electrode giving a sensitive adsorptive complex reduction peak with a peak potential at -0.36V(vs. SCE). Optimum experimental conditions were found by the use of 0.08mol/L HAc, 0.06mol/L NaAc, 5.0 × 10^?3mol/L EDTA and 1.0 × 10^?5mol/L PAR. With preconcentration for 60s, the derivative peak height of the complex compound is linearly proportional to the concentration for Fe in the range from 1.0 × 10^?9mol/L to 1.0 × 10^?7mol/L. For a 2–min pre–concentration time, the detection limit found was 2.0 × 10^?10mol/L. This method has high sensitivity and selectivity. It has been applied to the determination of trace iron in food and water samples without any pre–separation step.     

Synthesis of N-benzothiazol-2-yl-amides by Pd-catalyzed C(sp~2)–H functionalization

A catalytic synthesis of N-benzothiazol-2-yl-amides from 1-acyl-3-(phenyl)thioureas was achieved in the presence of a palladium catalyst through the C(sp2)–H functionalization/C–S bond formation. This synthetic methodology can produce various N-benzothiazol-2-yl-amides in high yields with good functional group tolerance.     

Syntheses,spectroscopy, and catalysis of (η 4-cod)Rh(I)-complexes with (R or S)-2-(salicylaldimine)-2-phenylethanol or (rac)-2-(salicylaldimine)-1-phenylethanol

Condensation of salicyldehyde with (R or S)-2-amino-2-phenylethanol or rac-2-amino-1-phenylethanol gives enantiopure (R or S)-2-(salicylaldimine)-2-phenylethanol (R- or S-H₂L1) or (rac)-2-(salicylaldimine)-1-phenylethanol (rac-H₂L2). The Schiff bases coordinate to [Rh(η ⁴-cod)(μ-O₂CCH₃)]₂ to afford mononuclear [Rh(η ⁴-cod){(R or S)-2-(salicylaldiminato)-2-phenylethanol-κ ² N,O}], [Rh(η ⁴-cod)(R- or S-HL1)] (1 or 2), or [Rh(η ⁴-cod){(rac)-2-(salicylaldiminato)-1-phenylethanol-κ ² N,O}], [Rh(η ⁴-cod)(rac-HL2)] (3). The Schiff base and complexes are characterized by IR-, UV/Vis-, ¹H/¹³C-NMR-, mass-spectroscopy, circular dichroism (CD), and polarimetry. The synthetic and spectroscopic results suggest that deprotonated Schiff base coordinates to [Rh(η ⁴-cod)] as a six-membered N,O-chelate with distorted square planar geometry at rhodium. CD and polarimetry measurements show the enantiopurity of the Schiff bases as well as the complexes in solution. The in situ system composed of [Rh(η ⁴-cod)Cl]₂ and S-H₂L1 has been used as a catalyst for the reduction of acetophenone into rac-1-phenylethanol with 85% conversion in diphenylsilane at 0–5°C.     

Asymmetric domino Michael–Henry reaction of 1,2-diones with nitroolefins catalyzed by a chiral bisoxazolidine–Ni(acac)2 complex

The asymmetric domino Michael–Henry reaction of 1,2-cyclohexadione with nitroolefins catalyzed by chiral ligand bisoxazolidine 1 and Ni(acac)₂ has been developed. This process provided highly functionalized chiral bicycle[3,2,1] octane derivatives with the generation of four new stereogenic centers in high yields (76–99%), and with excellent enantioselectivities (up to 99%) and good diastereoselectivities (up to 9:1) under mild reaction conditions. The procedure presented is simple and makes this method suitable for practical use.