Fluorenylvinylenes bridged triphenylamine-based dyes with enhanced performance in dye-sensitized solar cells

We have synthesized a series of new dipolar organic dyes Bn (n=0, 1, 2) employing triarylamine as the electron-donor, 2-cyanoacrylic acid as the electron-acceptor, and fluorenevinylene as the conjugated bridge, which were used as sensitizers in dye-sensitized solar cells. It is found that the solar-energy-to-electricity conversion efficiencies of the prepared DSSCs are in the range of 2.79-5.56%, which reach 35-70% of a standard device based on N719 fabricated and measured under the same conditions. The DSSC sensitized with B1 with balanced length of conjugated bridge shows the highest photo-to-electrical energy conversion efficiency and the open-circuit photovoltage (V_oc) of 0.86 V.     

Dipolar organic pyridyl dyes for dye-sensitized solar cell applications

New dipolar dyes containing arylamine as the electron donor, 2-cyanoacrylic acid as the acceptor, and a conjugated spacer with incorporation of 2,5-pyridyl entity have been synthesized. Photophysical and electrochemical measurements, and theoretical computation were carried on these dyes. The solar cell devices using these dyes as the sensitizers exhibited light-to-electricity efficiencies in the range of 4.28–5.27%, which reaches 60–72% of N719-based device fabricated and measured under similar conditions. Better DSSC performance can be achieved with the dye where pyridine group is attached to thienyl or fluorenyl group because of favorable resonance energy and/or coplanarity for more effective charge transfer.     

Organic dyes with a novel anchoring group for dye-sensitized solar cell applications

Two novel trialkylsilyl-containing organic sensitizers (JK-53 and JK-54) have been designed and synthesized. Nanocrystalline TiO₂–silica-based dye-sensitized solar cells (DSSCs) were fabricated using these dyes. Under standard global AM 1.5 solar conditions, the JK-53-sensitized cell gave a short-circuit photocurrent density (J_sc) of 6.37 mA cm^?2, an open-circuit voltage (V_oc) of 0.70 V, and a fill factor of 0.74. These values correspond to an overall conversion efficiency (η) of 3.31%. By comparison, the JK-54-sensitized cell resulted in a J_sc of 7.52 mA cm^?2, a V_oc of 0.71 V, and a fill factor of 0.75. These values give an overall conversion efficiency of 4.01%.     

Functionalized organic dyes containing a phenanthroimidazole donor for dye-sensitized solar cell applications

Five functionalized organic dyes (H6-10) containing a phenanthroimidazole unit as an electron donor were synthesized and characterized for use in dye-sensitized solar cell (DSSC) applications. Under standard global AM 1.5 solar conditions, the DSSCs based on dye H6 displayed the best performance, with an incident photon-to-current conversion efficiency (IPCE) exceeding 70% at wavelengths of 400–530 nm, a short-circuit photocurrent density of 10.98 mA cm^?2, an open-circuit voltage of 0.68 V, a fill factor of 0.69, and an overall conversion efficiency of 5.12%. This efficiency is ～94% of that for JK2 cells (5.46%) and ～72% of that for N719 cells (7.07%) under the same conditions.     

Synthesis and applications of novel acceptor-donor-acceptor organic dyes with dithienopyrrole- and fluorene-cores for dye-sensitized solar cells

Four novel symmetrical organic dyes (S1-S4) configured with acceptor-donor-acceptor (A-D-A) structures containing electron donating fluorene (S1 and S2) and N-alkyl dithieno[3,2-b:2′,3′-d]pyrrole (DTP) (S3 and S4) cores terminated with two anchoring cyanoacrylic acids (as electron acceptors) were synthesized and applied to dye-sensitized solar cells (DSSCs). The DSSC device based on S2 dye showed the best photovoltaic performance among S1-S4 dyes: a maximum monochromatic incident photon-to-current conversion efficiency (IPCE) of 76%, a short circuit current (J_SC) of 12.27 mA/cm², an open circuit voltage (V_OC) of 0.61 V, a fill factor (FF) of 0.63, and an overall power conversion efficiency (η) of 4.73%. Besides, the utilization of chenodoxycholic acid (CDCA) as a co-adsorbent in the DSSC device based on S3 dye showed a significant improvement in its η value (from 3.70% to 4.31%), which is attributed to the suppression of dye aggregation on TiO₂ surface and thus to increase the J_SC value eventually.     

N-(2-Alkoxyphenyl)-substituted double rhodanine indoline dyes for zinc oxide dye-sensitized solar cell

The effect of N-(2-alkoxyphenyl) group in double rhodanine indoline dye on the performance of zinc oxide dye-sensitized solar cell was examined. Both J_sc and V_oc were improved by introducing long alkoxy group due to prevention of H-aggregates formation and inhibition of electron recombination from zinc oxide surface to electrolyte.     

Structural optimization of thiophene-(N-aryl)pyrrole-thiophene-based metal-free organic sensitizer for the enhanced dye-sensitized solar cell performance

In this study, we prepared thiophene-(N-aryl)pyrrole-thiophene (TPT)-based two new metal-free organic sensitizers (TPTDYE 2 and TPTDYE 3) with the aim of improving the dye-sensitized solar cell (DSSC) performance of recently reported TPT-based organic sensitizer (TPTDYE 1). The molecular structure of TPTDYE 1 was tuned by decreasing the distance between the donor and acceptor groups (TPTDYE 2) or by introducing a fluoride atom on the phenyl ring near to the electron accepting cyanoacrylic acid group (TPTDYE 3). The photophysical and electrochemical studies of the newly synthesized sensitizers revealed that their absorption and energy levels were significantly altered compared to those of TPTDYE 1. The DSSC performance of each of sensitizers TPTDYE 2 and TPTDYE 3 was investigated with and without coadsorbent and compared with those of TPTDYE 1 and standard N719. Between the two DSSCs, the one sensitized by TPTDYE 2 offered greatly improved solar to electrical energy conversion efficiency of 6.85% without coadsorbent and 7.06% with coadsorbent. The overall conversion efficiency of the DSSC sensitized by TPTDYE 2 without and with coadsorbent was found to be improved by 32% and 20%, respectively, compared with that of the DSSC sensitized by TPTDYE 1 and almost equal (98.7%) to that of the standard cell prepared from N719 under an identical condition.     

Molecular design of novel indacenodithiophene-based organic dyes for efficient dye-sensitized solar cells applications

Indacenodithiophene (IDT)-based high-efficiency photovoltaics have received increasing attention recently. This paper reports a density functional theory investigation of the electronic and optical properties of three IDT-based organic dyes together with the dye/(TiO₂)₄₆ interface. In order to enhance the photoelectric properties of IDT dyes, this paper considers two methods for the structure modification of the experimentally reported dye DPInDT (J. Org. Chem. 2011, 76, 8977): the extension of the conjugation length by dithienothiophene as well as the heteroatom substitution of the bridging atoms by electron-rich nitrogen atoms. Our calculations show that both methods obviously affect the distributions of the molecular orbitals and notably red shift the absorption peaks of around 20 nm, with the former method demonstrating enhanced light harvesting efficiency. The structure modifications proposed also enhance the emission spectrum properties for IDT-based organic dyes. The calculated ultrafast injection time of electrons from the excited state of IDT dyes to the (TiO₂)₄₆ belongs to the femtosecond order of magnitude, and is ideal for efficient photoelectric conversion process in dye-sensitized solar cells (DSSCs) applications. The IDT dyes designed in this paper have good electronic and spectroscopic properties. This study is expected to provide useful guidance for the development of novel IDT dyes for applications in DSSCs.     

Molecular engineering of organic sensitizers for dye-sensitized solar cell applications

Novel unsymmetrical organic sensitizers comprising donor, electron-conducting, and anchoring groups were engineered at a molecular level and synthesized for sensitization of mesoscopic titanium dioxide injection solar cells. The unsymmetrical organic sensitizers 3-(5-(4-(diphenylamino)styryl)thiophen-2-yl)-2-cyanoacrylic acid (D5), 3-(5-bis(4-(diphenylamino)styryl)thiophen-2-yl)-2-cyanoacrylic acid (D7), 5-(4-(bis(4-methoxyphenylamino)styryl)thiophen-2-yl)-2-cyanoacrylic acid (D9), and 3-(5-bis(4,4'-dimethoxydiphenylamino)styryl)thiophen-2-yl)-2-cyanoacrylic acid (D11) anchored onto TiO2 and were tested in dye-sensitized solar cell with a volatile electrolyte. The monochromatic incident photon-to-current conversion efficiency of these sensitizers is above 80%, and D11-sensitized solar cells yield a short-circuit photocurrent density of 13.90 +/- 0.2 mA/cm(2), an open-circuit voltage of 740 +/- 10 mV, and a fill factor of 0.70 +/- 0.02, corresponding to an overall conversion efficiency of 7.20% under standard AM 1.5 sun light. Detailed investigations of these sensitizers reveal that the long electron lifetime is responsible for differences in observed open-circuit potential of the cell. As an alternative to liquid electrolyte cells, a solid-state organic hole transporter is used in combination with the D9 sensitizer, which exhibited an efficiency of 3.25%. Density functional theory/time-dependent density functional theory calculations have been employed to gain insight into the electronic structure and excited states of the investigated species.     

Dithienothiophene (DTT)-based dyes for dye-sensitized solar cells: synthesis of 2,6-dibromo-DTT

A one-pot synthesis of 2,6-dibromodithieno[3,2-b;2',3'-d]thiophene (dibromo-DTT, 4) was developed. A key step was bromodecarboxylation of DTT-2,6-dicarboxylic acid, obtained by saponification of the diester 1. The donor-acceptor dye DAHTDTT (13), based on a central 2,6-bis[2'-(3'-hexylthienyl)]dithieno[3,2-b;2',3'-d]thiophene core (9), was prepared and incorporated in a dye-sensitized solar cell (DSC), which exhibited an energy conversion efficiency of 7.3% with V(oc) of 697 mV, J(sc) of 14.4 mA/cm(2), and ff of 0.73 at 1 sun.     

Highly efficient substituted triple rhodanine indoline dyes in zinc oxide dye-sensitized solar cell

Substituited triple rhodanine indoline dyes showed higher performance than known triple rhodanine derivative (D150). A few triple rhodanine indoline derivatives showed comparable conversion efficiency to D149.     

Theoretical study of new ruthenium-based dyes for dye-sensitized solar cells

Two relevant, recently reported, ruthenium-based complexes to be used as sensitizers in Gra?tzel photovoltaic cells are theoretically studied. The UV/vis absorption spectra have been computed within the time-dependent density functional theory formalism. The obtained excitation energies are compared with the experimental results, and the nature of the transition is analyzed in terms of the electronic density. A preliminary study on the performance of different functionals against the equation of motion coupled cluster is performed on a smaller model system.     

Preparation of donor-acceptor type organic dyes bearing various electron-withdrawing groups for dye-sensitized solar cell application

Novel donor-π-spacer-acceptor type organic dyes bearing various electron-withdrawing groups on their acceptor part were synthesized by Knoevenagel condensation with acetic acid silyl ester derivatives. Dye-sensitized solar cells with the new dyes present solar light-to-electricity conversion efficiency of 2.51-4.05%.     

Synthesis and characterization of organic dyes containing 4,5-diazafluorene as efficient sensitizers for dye-sensitized solar cells

Two dyes which are 4,5-diazafluoren-9-one-derived diimine ligands and their corresponding Ru(II) bipyridine complexes were synthesized. The structures of all compounds were determined by FTIR, UV–Vis, ¹H-NMR, ¹C-NMR, and MS spectroscopic data. The photovoltaic and electrochemical properties of these compounds were investigated and the applicability in DSSCs as photosensitizers was studied. The photovoltaic cell efficiencies (PCE) of the devices were 0.36–1.26% under simulated AM 1.5 solar irradiation of 100 mW/cm², and the highest open-circuit voltage (V_oc) reached 0.34 V. When comparing the photovoltaic performance of DSSC devices, efficiency increases L2 < L2-Ru < L1 < L1-Ru. The PCE value of 1.26% was obtained with a DSSC based on L1-Ru under AM irradiation (100 mW/cm²). DSSC based on L1-Ru produced efficiency of 1.26%, whereas DSSC-based L1 exhibited the device performance with efficiency of 0.84% under illumination. These results show that the availability of a π-conjugated bridge and a richer electron donor for photovoltaic performance of the DSSC provides increased efficiency.     

High efficiency of dye-sensitized solar cells based on metal-free indoline dyes

We now report metal-free organic dyes having a new type of indoline structure, which exhibits high efficiencies in dye-sensitized solar cells. The solar energy to current conversion efficiencies with the new indoline dye was 6.51%. Under the same conditions, the N3 dye was 7.89% and the N719 dye was 8.26%. The new indoline dye was optimized for the amount of 4-tert-butyl pyridine in the electrolyte and cholic acid as a coadsorbent. Subsequently, the solar energy to current conversion efficiencies reached 8.00%. This value was the highest obtained efficiency for dye-sensitized solar cells based on metal-free organic dyes without an antireflection layer.     

Quasi solid-state dye-sensitized solar cell with P(MMA-co-MAA)-based polymer electrolytes

Journal of Solid State Electrochemistry - A series of poly (methylacrylate-co-methylacrylic acid) (P(MMA-co-MAA)) gel polymer electrolytes containing iodide/triiodide (I−/I3−) redox...     

Synthesis of new julolidine dyes having bithiophene derivatives for solar cell

Three novel organic dyes containing julolidine and bithiophene derivatives were synthesized. Nanocrystalline TiO₂ dye-sensitized solar cells were fabricated using these dyes. A solar-to-electric conversion efficiency of 2.95% is achieved with JK-14. We found that the power conversion efficiency was shown to be quite sensitive to the structural variations of bridging bithiophene moiety.     

Synthesis of new dyes containing double tetrazole groups for sensitization of TiO<Subscript>2</Subscript> nanoparticles in dye-sensitized solar cells

Di(1H-tetrazol-5-yl)methane is employed as a new electron acceptor group in the synthesis of two metal-free organic dyes containing triphenylamine donor group. Dye-sensitized nanocrystalline TiO₂ solar cell (DSSC) applying these novel dyes is constructed for consideration of their photovoltaic properties. The electronic properties of the dyes are also considered with the aid of theoretical calculations. The DSSC constructed from 4-(2,2-di(1H-tetrazol-5-yl)vinyl)-N,N-diphenylaniline (T1) shows a short-circuit photocurrent density of 13.38 mA cm^?2, an open circuit voltage of 578 mV, and a fill factor of 0.54, with a resulted solar energy-to-electricity conversion efficiency of 4.18% under simulated 1 sun irradiation (100 mW cm^?2). This result reveals that the dye with the di(1H-tetrazol-5-yl)methane anchoring group injects more electrons to the conduction band of TiO₂ in comparison with its analogs with single tetrazole ring in their anchoring group. It is found that in spite of a red-shift of the absorption spectrum resulted from the lengthening of the molecule, the dye with two di(1H-tetrazol-5-yl)methane groups gives lower performance than the dye with a single electron acceptor.     

Co-sensitization of organic dyes for efficient ionic liquid electrolyte-based dye-sensitized solar cells

The co-sensitization of two organic dyes (SQ1 and JK2), which are complementary in their spectral responses, shows enhanced photovoltaic performance compared with that of an individual organic dye-sensitized solar cell. The power conversion efficiency of the co-sensitized organic dye solar cell based on the newly developed binary ionic liquid (solvent-free) electrolyte gives 6.4% under AM 1.5 sunlight at 100 mW/cm2 irradiation, which is higher than that of individual dye-sensitized solar cells. The incident monochromatic photon-to-current conversion efficiency (IPCE) of the co-sensitized solar cell shows typical absorption peaks at 530 and 650 nm corresponding to the two dyes and displays a broad spectral response over the entire visible spectrum with IPCE of >40% in the 400-700 nm wavelength domain.     

Convenient synthesis of functionalized 4,4′-disubstituted-2,2′-bipyridine with extended π-system for dye-sensitized solar cell applications

Exploration of new ruthenium-based sensitizers for dye-sensitized solar cell (DSC) applications requires an easy access to multifunctionalized ligands for efficient screening of sensitizers’ properties. Based on the Horner-Emmons-Wadsworth reaction, a convenient synthetic route for the extension of the π-system on 4,4′-disubstituted-2,2′-bipyridines was used to develop a novel series of functionalized 2,2′-bipyridine ligands with either electron-withdrawing or donating end-capping group. ¹H NMR spectroscopy revealed that all the new bipyridyl ligands were obtained exclusively in their fully E isomers.