The elastic,electronic, and optical properties of PtSi and PtGe compounds

The structural, mechanical, electronic and optical properties of orthorhombic PtSi and PtGe were investigated using norm-conserving pseudopotentials within the local density approximation in the frame of density functional theory. The calculated lattice parameters and bulk modulus for PtSi and PtGe have been compared with the experimental and theoretical values. The second-order elastic constants were calculated, and the other related quantities such as the Young's modulus, shear modulus, Poisson's ratio, anisotropy factor, sound velocities and Debye temperature have also been estimated. The linear photon-energy dependent dielectric functions and some optical properties such as the energy-loss function, the effective number of valance electrons and the effective optical dielectric constant were calculated. Our structural estimation and some other results are in agreement with the available experimental and theoretical data.     

Structural,mechanical, thermodynamics properties and phase transition of FeVSb

The structural, mechanical, thermodynamics properties and phase transition of FeVSb are investigated extensively using the first principle calculations and the quasi-harmonic Debye model. From the calculated elastic constants of cubic FeVSb, some other mechanical quantities, such as bulk modulus and Poisson's ratio, are drawn. Surprisingly, it is found that almost all these mechanical quantities are larger than those of CoVSb (Bo Kong et al., J. Alloys Compd. 509 (2011) 2611); the obtained corresponding transition pressure from fcc to hcp is also larger than that of CoVSb. For these distinctions, their complete different electronic and magnetic behaviors in their cubic structures may be responsible. However, in their hexagonal structures, atomic configurations are similar in terms of the analysis of both the ground-state structure and enthalpy–pressure curves. It is also shown that the elastic instability of cubic FeVSb does not appear with pressure up to 120 GPa and should not be a reason for the pressure-induced phase transition. In addition, heat capacity, Debye temperatures, and so on are obtained successfully for cubic FeVSb under the quasi-harmonic Debye model. Furthermore, we attempt to explore the phase diagram of FeVSb with the model.     

Structural, elastic and electronic properties of transition metal carbides TMC (TM=Ti, Zr, Hf and Ta) from first-principles calculations

The structural, elastic and electronic properties of TiC, ZrC, HfC and TaC have been investigated by first-principles calculations using the plane-wave pseudopotential method. Different exchange-correlation functionals regarding the local density approximation and the PBE, RPBE and PW91 forms of generalized gradient approximation are taken into account. The NaCl-type cubic structures of TMC (TM=Ti, Zr, Hf and Ta) are optimized and confirmed to be mechanically stable. The elastic properties such as the elastic constants, bulk modulus, shear modulus, Young’s modulus and Poisson’s ratio of TMC are investigated, and the performances of LDA and GGA are discussed. The electronic density of state, electron charge density and Mulliken population analysis have been explored to discuss the electronic properties and bonding behaviors of TMC. The present calculation results compare satisfactorily with the experimental data and previous theoretical calculations.     

分子动力学研究表面缺陷对硅纳米线杨氏模量的影响

硅纳米线因受量子尺寸效应与表面效应的影响而具有奇特的力、电及其耦合特性,成为了纳米电子器件的核心构件.然而在硅纳米线的制备过程中,表面产生缺陷不可避免.因此本文采用分子动力学方法着重研究了表面缺陷浓度对不同横截面形状(正方形、六角形和三角形)的[110]晶向和[111]晶向硅纳米线杨氏模量的影响.研究结果表明,当硅纳米线仅有单一表面缺陷时,不同晶向硅纳米线的杨氏模量均随表面缺陷浓度增加而迅速单调减小.当表面缺陷浓度为10%时,杨氏模量的减小幅度在10%-20%之间,减小幅度的差异与硅纳米线的晶向以及横截面形状密切相关.当存在多个表面缺陷时,杨氏模量随着缺陷浓度的增加表现出了不同程度的波动趋势.三角形截面硅纳米线的杨氏模量波动幅度最大,正方形截面的波动较小,即表面缺陷分布的不同对正方形截面硅纳米线的杨氏模量影响较小,这表明表面缺陷的影响与其分布及硅纳米线的横截面形状密切相关.通过与实验结果对比,本文的研究结果揭示了表面缺陷是导致硅纳米线杨氏模量实验值变小的重要因素,因此在表征硅纳米线的力学性能时,需要考虑表面缺陷的影响.     

The effect of temperature,defect and strain rate on the mechanical property of multi-layer graphene: Coarse-grained molecular dynamics study

In this work, we investigate the effect of temperature, defect, and strain rate on the mechanical properties of multi-layer graphene using coarse-grained molecular dynamics (CGMD) simulations. The simulation results reveal that the mechanical properties of multi-layer graphene tend to be less sensitive to temperature as the layer increases, but they are sensitive to the distribution and coverage of Stone-Wales (SW) defects. For the same number of defect, there is less decline in the fracture stress and Young's modulus of graphene when the defects have a regular distribution, in contrast to random distribution. In addition, Young's modulus is less influenced by temperature and defect, compared to fracture stress. Both the fracture stress and Young's modulus have little dependence on strain rate.     

Structural parameters, electronic structures, elastic stiffness and thermal properties of M2PC (M=V, Nb, Ta)

Using pseudo-potential plane-wave method based on the density functional theory in conjunction with the generalized gradient approximation, structural parameters, electronic structures, elastic stiffness and thermal properties of M₂PC, with M=V, Nb, Ta, were studied. The optimized zero pressure geometrical parameters are in good agreement with the available results. Pressure effect, up to 20 GPa, on the lattice parameters was investigated. Electronic properties are studied throughout the calculation of densities of states and band structures. The elastic constants and their pressure dependence were predicted using the static finite strain technique. We performed numerical estimations of the bulk modulus, shear modulus, Young's modulus, Poisson's ratio and average sound velocity for ideal polycrystalline M₂PC aggregates in framework of the Voigt-Reuss-Hill approximation. We estimated the Debye temperature and the theoretical minimum thermal conductivity of M₂PC.     

First-principles calculations of structural stability,elastic, dynamical and thermodynamic properties of SiGe,SiSn, GeSn

A first-principles calculations, based on the norm-conserving pseudopotentials and the density functional theory (DFT) and the density functional perturbation theory (DFPT) as implemented in the ABINIT code, have been performed to investigate the structural stability, elastic, lattice dynamic and thermodynamic properties of the ordered SiGe, SiSn and GeSn cubic alloy in zinc-blende (B3) structure. The calculated lattice parameters and bulk modulus agree with the previous results. The second-order elastic constants have been calculated and other related quantities such as the Young’s modulus, shear modulus, anisotropy factor are also estimated. We also obtain the data of lattice dynamics and the temperature dependent properties currently lacking for SiGe, SiSn and GeSn. Findings are also presented for the temperature-dependent behaviors of some thermodynamic properties such as the internal energy, Helmholtz free energy, entropy and heat capacity.     

纳米多孔银力学性能表征分子动力学模拟

纳米多孔金属拥有优异的物理、化学性能,在众多领域中极具应用前景.相关力学性能的认知是实现其功能化应用的重要基础之一.基于分子动力学模拟,以三种拓扑结构(立方体结构、金刚石结构、螺旋体结构)的纳米多孔银为对象,研究了单轴拉伸下的力学响应,探讨了拓扑结构和相对密度与其力学性能的内在联系.仿真结果表明,纳米多孔银的极限强度和杨氏模量随相对密度增大而增大的同时,还紧密地依赖于拓扑结构.其中,金刚石结构与螺旋体结构的模量随相对密度的变化趋势较为相近,而螺旋体结构中螺旋形式的孔棱在受力拉直的过程中抵抗变形,表现出相对较好的塑性.立方体结构中,孔棱分布形式单一,抵抗变形的能力较弱,模量值较低.同一相对密度下,金刚石结构的强度最大,立方体结构次之,螺旋体结构最小.金刚石结构中,交错的孔棱间形成三角骨架结构,具有一定的稳定性,表现出相对较高的强度.     

Mechanical properties,anisotropy and hardness of group IVA ternary spinel nitrides

In this work, new ternary cubic spinel structures are designed by the substitutional method. The structures, elasticity properties, intrinsic hardness and Debye temperature of the cubic ternary spinel nitrides are studied by first principles based on the density-functional theory. The results show that γ-CSn₂N₄, γ-SiC₂N₄, γ-GeC₂N₄ and γ-SnC₂N₄ are not mechanically stable. The elastic constants C_ij of these cubic spinel structures are obtained using the stress–strain method. Derived elastic constants, such as bulk modulus, shear modulus, Young's modulus, Poisson coefficient and brittle/ductile behaviour are estimated using Voigt–Reuss–Hill theories. The B/G value, the Poisson's ratio and anisotropic factor are calculated for eight ternary stable crystals. Based on the microscopic hardness model, we further estimate the Vickers hardness of all the stable crystals. From the calculated hardness of the stable group IVA ternary spinel nitrides by Gao's and Jiang's methods, it is observed that the stable group IVA ternary spinel nitrides are not superhard materials except for γ-CSi₂N₄. Furthermore, the Debye temperature for the eight stable crystals is also estimated.     

Pressure‐induced incompressibility and point singularity of mechanical properties of TaC in NiAs‐type structure

The structural and elastic properties of TaC in NiAs‐type structure under high pressure have been investigated using first principles calculations based on density functional theory. Results indicate that the incompressibility along the c‐axis of TaC exceeds that of diamond under higher pressure. Particularly, an interesting point singularity exists in its mechanical properties as the pressure increases from 20 GPa to 40 GPa. The minimal shear modulus, Young's modulus, Debye temperature, and maximum Poisson ratio of TaC are simultaneously obtained at 28 GPa. The calculations of hardness indicate that the NiAs‐type TaC crystal possesses excellent mechanical properties. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Stability,electronic structures,and mechanical properties of Fe–Mn–Al system from first-principles calculations

The stability, electronic structures, and mechanical properties of the Fe–Mn–Al system were determined by firstprinciples calculations. The formation enthalpy and cohesive energy of these Fe–Mn–Al alloys are negative and show that the alloys are thermodynamically stable. Fe_3Al, with the lowest formation enthalpy, is the most stable compound in the Fe–Mn–Al system. The partial density of states, total density of states, and electron density distribution maps of the Fe–Mn–Al alloys were analyzed. The bonding characteristics of these Fe–Mn–Al alloys are mainly combinations of covalent bonding and metallic bonds. The stress-strain method and Voigt–Reuss–Hill approximation were used to calculate the elastic constants and moduli, respectively. Fe_(2.5)Mn_(0.5)Al has the highest bulk modulus, 234.5 GPa. Fe_(1.5)Mn_(1.5)Al has the highest shear modulus and Young's modulus, with values of 98.8 GPa and 259.2 GPa, respectively. These Fe–Mn–Al alloys display disparate anisotropies due to the calculated different shape of the three-dimensional curved surface of the Young's modulus and anisotropic index. Moreover, the anisotropic sound velocities and Debye temperatures of these Fe–Mn–Al alloys were explored.     

高温高压下立方氮化硼和六方氮化硼的结构、力学、热力学、电学以及光学性质的第一性原理研究

本文采用基于密度泛函理论的第一性原理平面波赝势和局域密度近似方法,优化了立方和六方氮化硼的几何结构,系统地研究了零温高压下立方和六方氮化硼的几何结构、力学、电学以及光学性质.结构与力学性质研究表明:立方氮化硼的结构更加稳定,两种结构的氮化硼均表现出一定的脆性,而六方氮化硼的热稳定性则相对较差;电学性质研究表明:立方氮化硼和六方氮化硼均为间接带隙半导体,且立方氮化硼比六方氮化硼局域性更强;光学性质结果显示:立方氮化硼和六方氮化硼对入射光的通过性都很好,在高能区立方氮化硼对入射光的表现更加敏感.此外,还研究了高温高压下立方氮化硼的热力学性质,并得到其热膨胀系数、热容、德拜温度和格林艾森系数随温度和压力的变化关系.本文的理论研究阐述了高压下立方氮化硼和六方氮化硼的相关性质,为今后的实验研究提供了比较可靠的理论依据.     

The influence of tilt grain boundaries on the mechanical properties of bicrystalline graphene nanoribbons

The mechanical properties of bicrystalline graphene nanoribbons with various tilt grain boundaries (GBs) which typically consist of repeating pentagon–heptagon ring defects are investigated based on the method of molecular structural mechanics. The GB models are constructed via the theory of disclinations in crystals, and the elastic properties and ultimate strength of bicrystalline graphene nanoribbons are calculated under uniaxial tensile loads in perpendicular and parallel directions to grain boundaries. The dependence of mechanical properties is analyzed on the chirality and misorientation angles of graphene nanoribbons, and the experimental phenomena that Young's modulus and ultimate strength of bicrystalline graphene nanoribbons can either increase or decrease with the grain boundary angles are further verified and discussed. In addition, the influence of GB on the size effects of graphene Young's modulus is also analyzed.     

W-Cu合金力学性能的第一性原理计算

采用基于密度泛函理论的第一性原理分析方法的CASTEP软件,计算了W-Cu_x(x=6.25,12.5,18.75,25,31.25,37.5,43.75,50)合金的晶格参数、体模量、剪切模量、杨氏模量等力学常数,还计算了焓变值、能带结构、电子态密度和电荷布局,研究Cu不同含量对W-Cu合金力学性能的影响.结果表明：Cu的添加会增加W基体触头材料的可塑性,韧性大小随着Cu含量的升高而增加,在掺杂比例为43.75%时达到最大值,韧性增加使得产生微裂纹的概率减小;另外还计算了W-Cu合金的态密度、能带结构和电荷布局,结果表明随着Cu含量的增加,共价性降低,金属性增强,便于加工成型.     

五模声学超表面理论分析与定向反射声学仿真*

以广义斯奈尔定律为理论依据,对五模声学超表面定向反射的基本原理进行了解析推导和理论分析,获得了五模超表面的理想连续物性参数分布,并给出了五模超表面尺寸设计准则;然后将超表面离散,获得离散单胞的密度和体积模量,并以此为目标进行五模微结构设计,采用均匀化理论计算微结构的等效物性参数;最后,进行了水下声场的声波定向反射调控仿真实验,研究了入射波频率对超表面定向反射性能的影响,仿真结果展现了五模超表面宽频有效的声波调控能力以及调控的可靠性和准确性。本文的研究工作为五模声学超表面的设计和物理实现提供理论指导。     

Structural,elastic, electronic,and thermodynamic properties of MgAgSb investigated by density functional theory

The structural, elastic, electronic, and thermodynamic properties of thermoelectric material Mg Ag Sb in γ, β, α phases are studied with first-principles calculations based on density functional theory. The optimized lattice constants accord well with the experimental data. According to the calculated total energy of the three phases, the phase transition order is determined from α to γ phase with cooling, which is in agreement with the experimental result. The physical properties such as elastic constants, bulk modulus, shear modulus, Young's modulus, Poisson's ratio, and anisotropy factor are also discussed and analyzed, which indicates that the three structures are mechanically stable and each has a ductile feature. The Debye temperature is deduced from the elastic properties. The total density of states(TDOS) and partial density of states(PDOS) of the three phases are investigated. The TDOS results show that the γ phase is most stable with a pseudogap near the Fermi level, and the PDOS analysis indicates that the conduction band of the three phases is composed mostly of Mg-3s,Ag-4d, and Sb-5p. In addition, the changes of the free energy, entropy, specific heat, thermal expansion of γ-MgAgSb with temperature are obtained successfully. The obtained results above are important parameters for further experimental and theoretical tuning of doped MgAgSb as a thermoelectric material at high temperature.     

Effects of alloying element on stabilities,electronic structures,and mechanical properties of Pd-based superalloys

The thermodynamic stabilities, electronic structures, and mechanical properties of the Pd-based superalloys are studied by first principles calculations. In this work, we discuss the effect of Pd-based superalloys made from Al, Si, Sc, Ti,V, Cr, Mn, Fe, Cu, Zn, Y, Zr, Nb, Mo, Tc, Hf, Ta, W, Re, Os, Ir and Pt, and we also calculate a face centered cubic(fcc)structure 2 × 2 × 2 superalloy including 31 Pd atoms and one alloying element T M(Pd_(31)TM). The mixing energies of these Pd-Based superalloys are negative, indicating that all Pd-based superalloys are thermodynamically stable. The Pd_(31)Mn has the lowest mixing energy with a value of-0.97 eV/atom. The electronic structures of the Pd-based superalloys are also studied, the densities of states, elastic constants and moduli of the mechanical properties of the Pd-based superalloys are determined by the stress-strain method and Voigt–Reuss–Hill approximation. It is found that Pd_(31)TM is mechanically stable, and Pd_(31)Tc has the largest C_(11), with a value 279.7 GPa. The Pd_(31)Cr has the highest bulk modulus with a value of299.8 GPa. The Pd_(31)Fe has the largest shear modulus and Young's modulus with the values of 73.8 GPa and 195.2 GPa,respectively. By using the anisotropic index, the anisotropic mechanical properties of the Pd_(31)T M are discussed, and threedimensional(3 D) surface contours and the planar projections on(001) and(110) planes are also investigated by the Young modulus.     

First-principles study of electronic and elastic properties of Stone–Wales defective zigzag carbon nanotubes

The interaction and coupling between the electrical, mechanical properties and formation energy for SW defective (10,0) carbon nanotube is studied in density functional theory. The investigated configurations include the axial and circumferential orientations for single defect as well as four distribution types for double ones. The more stable defective configurations, namely, SW-I configurations for single SW defective carbon nanotube and II–II-(2) and I–I ones for double SW defective tubes are related to high symmetry distribution of the defects. Moreover, we found that the σ^?–π^* hybridization induced by curvature effect causes the semiconductor to metal transition for double axial SW defects case. Young's modulus reduction of SW defective carbon nanotube with respect to defect-free one is less than 8%. The energy bands and Young's moduli of double SW defective tubes are mostly affected by the defect distribution and concentration but insensitive to the circumferential distance between the double defects.     

Mechanical properties of Co-Si-B amorphous alloys

The ternary amorphous systems Co_xSi₅B_95?x with 7070Si _y B_30?y with 5<y<18 were studied for their mechanical properties at room temperature. Structure sensitive parameters as density, Young's modulus, micro-hardness and crystallization temperature were investigated as a function of Co and Si contents. The value of density increases with higher Co content but not linearly as for Co-B. Young's modulus, micro-hardness and crystallization temperature decrease with increasing Co concentration. The packing fractionη was calculated using 12-coordinated Goldschmidt atomic radii. It is shown that changes in the proportions of metalloids contents in the alloys have more significant influence on the atomic structure and therefore on the mechanical properties than changes of Co content. The maximum tensile elastic strain for the Co-Si-B system was estimated. Influence of magnetic moment on Young's modulus is discussed.     

稀土元素La掺杂对AlN性能影响的第一性原理研究

本文通过基于密度泛函理论的第一性原理计算方法研究了稀土元素La掺杂对纤锌矿结构AlN力学性能及压电性能的影响.计算得到的AlN各项力学性能及压电性能与实验值较吻合.掺杂稀土元素La会降低其体模量、剪切模量与杨氏模量,但会使AlN由脆性材料转变为韧性材料.压电性能计算结果表明,掺杂稀土元素La后,可使体系的压电性能提升15%左右.电子结构分析结果表明La的引入会降低体系中化学键的作用强度,从而提升了体系的塑性及压电性能.