Proton di-ionizable p-tert-butylcalix[4]arene-crown-6 compounds in cone, partial-cone and 1,3-alternate conformations: synthesis and alkaline earth metal cation extraction

Novel proton di-ionizable p-tert-butylcalix[4]arene-crown-6 compounds in cone, partial-cone and 1,3-alternate conformations are synthesized to compare the efficiency and selectivity with which they extract alkaline earth metal ions. In these ligands, a crown-6 polyether unit links alternate aromatic rings of the calix[4]arene framework. To the remaining lower-rim positions are attached oxyacetic acid or N-(X)sulfonyl oxyacetamide groups. Changing the conformation varies the spatial relationship between a polyether-complexed divalent metal ion and the ionized side arms of the ligands. This is found to markedly affect the efficiency and selectivity in competitive solvent extraction of alkaline earth metal ions from aqueous solutions into chloroform by the di-ionizable calix[4]arene-crown-6 ligands.     

Synthesis and alkaline earth metal cation extraction by proton di-ionizable p-tert-butylcalix[4]arene-crown-5 compounds in cone, partial-cone and 1,3-alternate conformations

Synthetic strategies for novel, proton di-ionizable p-tert-butylcalix[4]arene-crown-5 compounds in cone, partial-cone and 1,3-alternate conformations are reported. Selective linkage of the two diametrical phenolic oxygens in p-tert-butylcalix[4]arene with tetraethylene glycol ditosylate gave 1,3-bridged p-tert-butylcalix[4]arene-crown-5. The two remaining phenolic units were alkylated using NaH and KH as the bases to give the cone and partial-cone conformers, respectively. Preparation of the 1,3-alternate conformers utilized a different sequence in which O-alkylation was followed by crown ether ring formation. Structures of these new ligands were elucidated by (1)H and (13)C NMR spectroscopy. These proton-ionizable ligands were tested for their solvent extraction properties toward alkaline earth metal cations. Surprising differences in their extraction behaviors are noted compared to those reported previously for di-ionizable p-tert-butylcalix[4]arenecrown-6 analogues.     

Effect of para-substituents on alkaline earth metal ion extraction by proton di-ionizable calix[4]arene-crown-6 ligands in cone, partial-cone and 1,3-alternate conformations

Two carboxylic acid or N-(X)sulfonyl carboxamide groups were incorporated into calix[4]arene-crown-6 compounds to afford di-ionizable ligands for use in divalent metal ion separations. Acidities of the N-(X)sulfonyl carboxamide groups were tuned by variation of the electron-withdrawing properties of X. Cone, partial-cone and 1,3-alternate conformations were obtained by different synthetic strategies and their structures verified by NMR spectroscopy. Competitive solvent extractions of alkaline earth metal cations from aqueous solutions into chloroform were performed and the results compared with those reported previously for di-ionizable p-tert-butylcalix[4]arene-crown-6 analogues to probe the influence of the para-substituent on the calix[4]arene scaffold on extraction selectivity and efficiency.     

Effect of conformation on metal ion extraction by calix[4]arene dicarboxylic acids

Synthetic routes to four calix[4]arene stereoisomers with two distal methoxycarboxy groups and two distal butoxy groups are reported. Conformations of cone, partial cone (butyl up), partial cone (acid up), and 1,3-alternate were established by ¹H and ¹³C-NMR spectroscopy. To probe the influence of ligand conformation on metal ion complexation, extractions from aqueous solutions into 1,2-dichloroethane were performed. These included competitive alkali metal cation extractions, competitive alkaline earth metal cation extractions, and single species extractions of Pb²⁺ and of Hg²⁺. Comparisons are also made with the results for a conformationally mobile analogue in which the two butoxy groups are replaced with methoxy groups.     

Di-ionizable calix[4]arene-1,2-crown-5 and -crown-6 ethers in cone conformations: synthesis and divalent metal ion extraction

Two series of di-ionizable calix[4]arene-1,2-crown-5 and -crown-6 ethers in cone conformations are synthesized. The ionizable groups are oxyacetic acid moieties and N-(X)sulfonyl oxyacetamide units with X=methyl, phenyl, 4-nitrophenyl, and trifluoromethyl, which ‘tunes’ their acidity. For competitive solvent extraction of alkaline earth metal cations from aqueous solutions into chloroform, the new ligands with N-(X)sulfonyl carbamoyl groups are efficient extractants with Ba²⁺ selectivity. On the other hand, the dicarboxylic acid analogues exhibit little selectivity in extraction of alkaline earth metal cations. For single species extractions of Pb²⁺, the ligands with both types of ionizable groups show very good extractions abilities. In single species extractions of Hg²⁺, the N-(X)sulfonyl carboxamide ligands are highly efficient, in contrast to the dicarboxylic acid compounds. Influences of the ionizable group identity, the crown ether ring size, and the presence of upper-rim p-tert-butyl groups on divalent metal ion extraction are explored.     

Synthesis and Cesium Binding Affinity of New 25,27-Bis(alkyloxy)calix[4]arene-crown-6 Conformers in Relation to the Alkyl Pendent Moiety

The preparation of new 25,27-bis(alkyloxy)calix[4]arenes-crown-6 in the cone, partial-cone and 1,3-alternate conformation is reported. We have also investigated the alkylation of the cone monoalkylated calix[4]arene-crown-6 achieved using Cs 2 CO 3 . This reaction afforded a mixture of cone and partial-cone calix[4]arenes-crown-6 having an alkyl chain anti or syn to the polyether ring. Conformations have been probed using 1 H, 13 C, 2D-NMR and NOESY analysis, and using X-ray crystallography. Extraction experiments using a two-phase solvent method involving cesium picrate were performed for these newly synthesized conformers. They reveal and confirm the strong preference for the 1,3-alternate conformers. The affinity of 1,3-alternate calixarenes for Cs + has been assessed by complexation measurements (log g ) using a spectrophotometric technique. No significant Cs + extraction difference was observed in relation to the nature of the alkyl chains on the aromatic rings. 1 H NMR studies of the 1,3-alternate calixarene Cs + complexes confirms the cation's spacial position between the two aromatic rings, due to cation- ~ interactions.     

Novel calix[4]arene-thiacrown ether for selective and efficient extraction of Ba(II), Pb(II), and Hg(II)

A di-ionizable p-tert-butylcalix[4]arene-1,3-thiacrown-5 ether extractant was synthesized. Its cone conformation and polyether ring attachment regioselectivity were verified by NMR spectroscopy. The metal ion-complexing properties of this ligand were evaluated by solvent extractions of metal cations from aqueous solutions into chloroform. The ligand was found to be an efficient extractant with Ba²⁺ selectivity in competitive solvent extraction of alkaline earth metal cations. It also exhibits high extraction ability for Pb²⁺ and for Hg²⁺ in single species solvent extractions.     

Synthesis of cone, partial-cone, and 1,3-alternate 25, 27-Bis

The preparation of 25,27-bis[1-(2-ethyl)hexyl]- and 25, 27-bis[1-(2-tert-butoxy)ethyl]calix[4]arene-crown-6 combining one polyether crown-6 and one alkylchain O-attached on each side of a calix[4]arene in the cone, partial-cone, and 1,3-alternate conformations are reported. The control over 25, 27-bisalkylcalix[4]arene-crown-6 conformation via varying specific reaction conditions was studied. The series of calix[4]arenes have been prepared by two routes, which differ in the order in which the alkyl or polyether groups were introduced. Moreover, methods have been developed to selectively prepare the cone and partial-cone conformers by using an appropriate base in the alkylation reactions. The conformations of these new derivatives have been probed by (1)H NMR analysis and X-ray crystallography. The (1)H and (13)C NMR spectra of 25,27-bis[1-(2-ethyl)hexyl]calix[4]arene-crown-6, 1, 3-alternate 1, cone 2, and partial-cone 3 are also discussed.     

Calix[4]arene-dithiacrown ethers: synthesis and potentiometric membrane sensing of Hg

A series of calix[4]arene-dithiacrown-5 and -dithiacrown-6 compounds in cone and 1,3-alternate conformations has been synthesized. Responses of these ionophores to Hg²⁺ and competing metal ions were determined in solvent polymeric membrane electrodes. High potentiometric selectivity for Hg²⁺ over Na⁺ and a variety of transition and heavy metal ions was obtained.     

Synthesis, NMR, X-ray structural analyses and complexation studies of new Ag selective calix[4]arene based dipodal hosts—a co-complexation of neutral and charged species

New podands based on the p-tert-butylcalix[4]arene unit with substitution at the lower rim incorporating imine units, have been synthesized in high yield by simple condensation method. These podands have been shown to extract and transport Ag⁺ selectively over alkali, alkaline earth metal cations, Zn²⁺, Pb²⁺ and Hg²⁺ ions, from neutral aqueous phase to organic phase. In all the ligands the calix unit has been found to be present in a cone conformation except for the one having pyridine as end group, at the ortho position. It has been isolated in two conformations; cone and 1,2-alternate. To the best of our knowledge, this may be the first 1,3-lower rim substituted calix[4]arene to exist in a 1,2-alternate conformation and is among a few known compounds with this conformation in the general class of calix[4]arenes. A complex of this ligand, which happens to be the highest extractant of Ag⁺ has been isolated and characterized using mass, ¹H and ¹³C NMR spectroscopy's and elemental analysis. The spectroscopic evidence and molecular modelling studies performed on the complex suggest a participation of the imine and pyridine nitrogens and two of the ether oxygens in coordination to the metal ion. The X-ray crystal structures of three of the ligands establish the formation of inclusion complexes with polar acetonitrile solvent molecules. The ¹H and ¹³C NMR spectra of all the compounds, taken in CDCl₃, show the presence of acetonitrile molecules in the cavity of the calix[4]arene, indicating inclusion of the neutral guest molecules in the solution phase as well. For one of the podands X-ray crystal structure has shown a formation of clatharate complex of chloroform with the ligand which has rarely been found in the case of calix[4]arenes.     

Calix[4]arene-thiacrown-5 di(carboxylic acid) regioisomers as metal ion extractants

A regioisomer of a previously reported p-tert-butylcalix[4]arene-1,3-thiacrown-5 di(carboxylic acid) is prepared in which the thiacrown ring attachment sites are moved from distal phenolic oxygens of a cone p-tert-butylcalix[4]arene scaffold to proximal phenolic oxygens. The influence of this structural variation in the di-ionizable calixcrown ligand on competitive solvent extractions of alkali metal cations and of alkaline earth metal cations and single species solvent extractions of Hg²⁺ and Pb²⁺ from aqueous solutions into chloroform is evaluated.     

Synthesis and conformational evaluation of p-tert-butylthiacalix[4]arene-crowns

Bridging of p-tert-butylthiacalix[4]arene afforded 1,3-dihydroxythiacalix[4]arene-monocrown-5 (3b), 1,2-alternate thiacalix[4]arene-biscrown-4 and -5 (4a,b), and 1,3-alternate thiacalix[4]arene-biscrown-5 and -6 (5a,b), depending on the metal carbonates and oligoethylene glycol ditosylates used. Starting from 1,3-dialkylated thiacalix[4]arenes, the corresponding bridging reaction gave 1,3-alternate, partial-cone, and cone conformers 10-19, depending on the substituents present. Temperature-dependent studies revealed that the conformationally flexible 1,3-dimethoxythiacalix[4]arene-crowns 10a-c exclusively occupy the 1,3-alternate conformation. Demethylation exclusively gave the cone 1,3-dihydroxythiacalix[4]arene-crowns (3a,c), which could not be obtained by direct bridging of thiacalix[4]arene. The different structures were assigned on the basis of several X-ray crystal structures and extensive 2-D (1)H NMR studies.     

Metal ion extraction by cone p-tert-butylcalix[4]arene-1,3-crown-5 with two N-(X)sulfonyl carbamoylmethoxy side arms and -1,3-monothiacrown-5 analogues

Four cone p-tert-butylcalix[4]arene-1,3-monothiacrown-5 ligands each with two N-(X)sulfonyl carbamoylmethoxy side arms are synthesized for comparison with analogs having only oxygen heteroatoms in the crown ether ring. Solvent extractions of hard alkali metal and alkaline earth metal cations, intermediate Pb²⁺, and soft Hg²⁺ from aqueous solutions into chloroform by these ligands are utilized to probe the effects of sulfur replacement in the crown ether ring on metal ion complexation.     

Di-ionizable p-tert-butylcalix[4]arene-1,3-crown-4 ligands: synthesis and alkaline earth metal cation extraction

A series of di-ionizable calix[4]arene-1,3-crown-4 compounds has been synthesized. The ionizable groups are oxyacetic acid and N-(X)sulfonyl oxyacetamide groups with X=methyl, phenyl, 4-nitrophenyl and trifluoromethyl, which ‘tunes’ the acidity of the latter. The efficiency and selectivity of these novel ligands are assessed with competitive solvent extractions of alkaline earth metal cations from aqueous solutions into chloroform. The results are compared with those reported previously for calix[4]arene-crown analogues with crown-6 and crown-5 rings.     

Mono-ionizable calix[4]arene-benzocrown-6 ligands in 1,3-alternate conformations: synthesis, structure and silver(I) extraction

Two series of novel mono-ionizable calix[4]arene-benzocrown-6 ligands in 1,3-alternate conformations are synthesized. In one series, the proton-ionizable group (PIG) is attached to the para position of one aromatic ring in the calixarene framework, thereby positioning it over the polyether ring cavity. In the other series, the PIG is a substituent on the benzo group in the polyether ring. This orients the PIG away from the crown ether cavity. In addition to carboxylic acid functions, the PIGs include N-(X)sulfonyl carboxamide groups. With X group variation from methyl to phenyl to 4-nitrophenyl to trifluoromethyl, the acidity of the PIG is ‘tuned’. Solvent extraction of Ag⁺ from aqueous solutions into chloroform is used to probe the influence of structural variation within the mono-ionizable calixcrown ligand on metal ion extraction efficiency, including the identity and acidity of the PIG and its orientation with respect to the polyether ring.     

Rigid versus flexible: how important is ligand "preorganization" for metal ion recognition by lower rim-functionalized calix[4]arenes?

For an assessment of the outcomes from use of an appropriately "preorganized" calixarene-based ionophore versus its conformationally mobile prototype, solvent extraction propensities of flexible calix[4]arene di-[N-(X-sulfonyl)carboxamides] for alkali, alkaline earth metal cations, Pb2+, Ag+ and Hg2+ are compared with those for seven new rigid analogs fixed in the cone, partial cone and 1,3-alternate conformations. For each of the metal ions, the preferred calix[4]arene conformation was determined from the NMR spectra for the metal salt of the flexible ligand. Except for Ag+, flexible calix[4]arene di-[N-(X-sulfonyl)carboxamides] were found to provide greater metal ion extraction efficiency and better selectivity than the corresponding "preorganized" ionophores.     

Di-ionizable p-tert-butylcalix[4]arene-1,2-monothiacrown-3 ligands in the cone conformation: synthesis and metal ion extraction

A series of di-ionizable calix[4]arene-1,2-crown-3 compounds with a sulfur-containing unit bridging the proximate phenolic oxygens have been synthesized. The ionizable groups are oxyacetic acid and N-(X)sulfonyl oxyacetamide groups with X=methyl, phenyl, 4-nitrophenyl, and trifluoromethyl, which ‘tunes’ the acidity of the latter. The efficiency and selectivity of these novel ligands are assessed for competitive solvent extractions of alkali metal cations and of alkaline earth metal cations from aqueous solutions into chloroform. Also the efficiencies for single species extractions of Pb²⁺ and of Hg²⁺ are determined. The results are compared with those reported previously for related ligands in which only oxygen heteroatoms are present in the crown ether unit.     

Metal-organic anion receptors: arranging urea hydrogen-bond donors to encapsulate sulfate ions

A new class of synthetic receptors for anions can be prepared by arranging urea hydrogen-bond donor groups on a simple metal-organic scaffold. The complex cation [PtL4]2+ (L = 8-(n-butylurea)iso-quinoline) can adopt four conformations reminiscent of calix[4]arene-based receptors; "cone", "partial cone", "1,2-alternate", or "1,3-alternate". 1H NMR solution data and solid-state X-ray structures show that a "1,2-alternate" conformation is used to bind spherical halide ions while a "cone" conformation is involved in strong binding with the tetrahedral oxy-anions such as the sulfate ion; even in a strongly competitive solvent such as DMSO.     

Informational rigidity in mesitylene-based calix[4]arenes adopting a 1,3-alternate conformation

Two chiral derivatives of a mesitylene-based calix[4]arene known to exist in the 1,3-alternate conformation were prepared by the attachment of homochiral residues to the four exo-hydroxy groups. Thus, the enantiotopic protons of the central scaffold became diastereotopic, leading to a doubling of their ¹H NMR signals in one example. From the temperature independence of the NMR spectrum, a lower limit of 24.2 kcal/mol could be estimated for the barrier of ring inversion. MM3 calculations confirm the 1,3-alternate conformation as the energy minimum, and estimate a barrier of 25.7 kcal/mol for the 1,3-alternate-to-1,3-alternate* interconversion process. This high barrier is due to the repulsive steric interactions between exo-methyl groups at vicinal rings when these groups pass each other.     

The extraction of thallium(I) and silver(I) ions with 1,3-alternate calix[4]arene derivatives

Tetraallyloxy and tetrabenzyloxy derivatives of calix[4]arenes in cone and 1,3-alternate conformations were synthesised and their capacity to extract thallium(I) and silver(I) ions was investigated. ??Low??-temperature single crystal X-ray structure determinations were recorded for two derivatives in which the calixarene conformation was that of an alternating cone, the aromatic rings lying closely quasi-parallel to the $ \overline{4} $ -axis of the cone. The structure of a tetraallyloxy derivative in the cone conformation was also determined in which a molecule of acetonitrile was included within the calixarene cavity.