基于四丹磺酰胺杯[4]芳烃的汞离子荧光化学传感器

我们方便地合成了上沿修饰四丹磺酰胺基团的杯[4]芳烃衍生物1,发现该化合物在含50％水的乙腈中显示出对汞离子高选择性和灵敏性的识别作用,竞争实验表明多数金属离子对其检测干扰较小。机理研究结果表明荧光萃灭源于由丹磺酰胺基团到汞离子的光致电子转移过程。另外,通过研究1和1-Hg2+的荧光衰减实验,以及对比双丹磺酰胺杯[4]芳烃2和单丹磺酰胺杯[4]芳烃3对汞离子的识别作用,发现化合物1的四丹磺酰胺基团具有很好的预组织和协同作用。化合物1对汞离子的检测限为3.41×10-6 mol·L-1,这可以使1成为一个潜在的汞离子荧光化学传感器。     

A novel Hg2+ fluorescence sensor TPE-TSC based on aggregation-induced emission

Abstract

A fluorescent sensor TPE-TSC with aggregation induced emission (AIE) characteristic is synthesized for detecting Hg²⁺ by attaching thiosemicarbazide (TSC) unit into tetraphenylethylene (TPE) group. TPE-TSC exhibits intense green emission in DMSO/H₂O (V:V?=?1:9) solution with the formation of the aggregation. TPE-TSC shows outstanding fluorescence quenching toward Hg²⁺ over other metal ions due to the formation of complex TPE-TSC/Hg²⁺ with a 2:1 binding ratio. The detection limit of TPE-TSC for Hg²⁺ is 1?×?10^?5 mol·L^?1.     

Polymer‐based colorimetric and “turn off” fluorescence sensor incorporating benzo[2,1,3]thiadiazole moiety for Hg2+ Detection

A conjugated polymer was synthesized by the polymerization of 4,7‐dibromobenzo[2,1,3]thiadiazole ( M‐1 ) with tri{1,4‐diethynyl‐2,5‐bis(2‐(2‐methoxyethoxy)‐ethoxy)}‐benzene ( M‐2 ) via Pd‐catalyzed Sonogashira reaction. The polymer shows strong orange fluorescence. The responsive optical properties of the polymer on various metal ions were investigated through photoluminescence and UV–vis absorption measurements. The polymer displays highly sensitive and selective on‐off Hg²⁺ fluorescence quenching property in tetrahydrofuran solution in comparison with the other cations including Mg²⁺, Zn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Cd²⁺, and Pb²⁺. More importantly, the fluorescent color of the polymer sensor disappears after addition of Hg²⁺, which could be easily detected by naked eyes. The results indicate that this kind of polymer sensor incorporating benzo[2,1,3]thiadiazole moiety as a ligand can be used as a novel colorimetric and fluorometric sensor for Hg²⁺ detection. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Determination of Hg(II) ions in water samples by a novel Hg(II) sensor,based on calix[4]arene derivative

A PVC membrane electrode for Hg(II) ions, based on a new cone shaped calix[4]arene (L) as a suitable ionophore was constructed. The sensor exhibits a linear dynamic in the range of 1.0 × 10^?6–1.0 × 10^?1 M, with a Nernstian slope of 29.4 ± 0.4 mV decade^?1, and a detection limit of 4.0 × 10^?7 M. The response time is quick (less than 10 s), it can be used in the pH range of 1.5–4, and the electrode response and selectivity remained almost unchanged for about 2 months. The sensor revealed comparatively good selectivity with respect to most alkali, alkaline earth, and some transition and heavy metal ions. It was successfully employed as an indicator electrode in the potentiometric titration of Hg²⁺ ions with potassium iodide, and the direct determination of mercury content of amalgam alloy and water samples.     

A new Schiff base fluorescent indicator for the detection of Mg<Superscript>2+</Superscript> and its application to real samples

A new Schiff base fluorescence probe, 3-Allylsalicylaldehyde salicylhydrazone (L), for Mg²⁺ was designed and synthesized. The fluorescence of the sensor L was enhanced remarkably by Mg²⁺ with 2:1 binding ratio, and the binding constant was determined to be 1.02 × 10⁷ M^?1. Probe L had high sensitivity for Mg²⁺ in a solution of DMF/water (4:1, v/v, pH 7.5), and the detection limit was 4.88 × 10^?8 mol/L. Common coexistent metal ions, such as K⁺, Na⁺, Ag⁺, Ca²⁺, Zn²⁺, Ba²⁺, Bi²⁺, Cu²⁺, Ni²⁺, Hg²⁺, Fe³⁺ , and Al³⁺, showed little or no interference on the detection of Mg²⁺ in solution. The fluorescence probe L, which was successfully used for the determination of trace Mg(II) in real samples, was shown to be promising for liquid-phase extraction coupled with fluorescence spectra.     

Ester and Ketone Groups Substituted Mono- and Di- Azo-coupled Azocalix[4]arenes as Extractant for Hg+ and Hg2+, or Cr3+Cations

This article describes extraction properties of mono- (A1–A8) and di- (B1–B8) substituted azocalix[4]arene analogues. The ionophore solvent extractions of alkaline-earth (Sr²⁺), basic metal (Pb²⁺) and transition metal cations (Ag⁺, Hg⁺, Hg²⁺, Co²⁺, Ni²⁺, Cu²⁺, Cr³⁺) from aqueous phase to organic phase were carried out by azocalix[4]arene derivatives. It has been observed that they show a good extraction behavior toward selected heavy metal (Hg) and toxic metal (Cr), while A4 and B4 prefer Hg⁺, Hg²⁺ and Cr³⁺ among transition metal cations, respectively. The azocalix[4]arenes (A1–A8) and (B1–B8) are not efficient extractants for all of the selected metal cations, whereas A4 and B4 are selective only for Hg metal cation.     

Polymer‐based fluorescence sensors incorporating chiral binaphthyl and benzo[2,1,3]thiadiazole moieties for Hg2+ detection

Three chiral polymers P‐1 , P‐2 , and P‐3 could be obtained by the polymerization of (R)‐6,6′‐dibutyl‐3,3′‐diiodo‐2, 2′‐binaphthol (R‐M‐1) , (R)‐6,6′‐dibutyl‐3,3′‐diiodo‐2,2′‐bisoctoxy‐1,1′‐binaphthyl ( R‐M‐2 ), and (R)‐6,6′‐dibutyl‐3,3′‐diiodo‐2,2′‐bis (diethylaminoethoxy)‐1,1′‐binaphthyl ( R‐M‐3 ) with 4,7‐diethynyl‐benzo[2,1,3]‐thiadiazole ( M‐1) via Pd‐catalyzed Sonogashira reaction, respectively. P‐1 , P‐2 , and P‐3 can show pale red, blue–green, and orange fluorescence. The responsive optical properties of these polymers on various metal ions were investigated by fluorescence spectra. Compared with other cations, such as Co²⁺, Ni²⁺, Ag⁺, Cd²⁺, Cu²⁺, and Zn²⁺, Hg²⁺ can exhibit the most pronounced fluorescence response of these polymers. P‐1 and P‐2 show obvious fluorescence quenching effect upon addition of Hg²⁺, on the contrary, P‐3 shows fluorescence enhancement. Three polymer‐based fluorescent sensors also show excellent fluorescence response for Hg²⁺ detection without interference from other metal ions. The results indicate that these kinds of tunable chiral polybinaphthyls can be used as fluorescence sensors for Hg²⁺ detection. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 997–1006, 2010     

A new phenothiazine-based fluorescence sensor for imaging Hg2+ in living cells

A new phenothiazine-based sensor PHE-Ad for monitoring Hg²⁺ has been designed and synthesized based on the intramolecular charge transfer (ICT) mechanism. The probes were characterized by FTIR, ¹H NMR, and HRMS, and their optical properties were detected by UV and FL. It's showed the probes detection of Hg²⁺ compared to other metal ions (Mg²⁺, Cu²⁺, Hg²⁺, Ag⁺, Co²⁺, Cr³⁺, Al³⁺, Ni²⁺, Zn²⁺, Ca²⁺, Fe³⁺, Fe²⁺, K⁺, Na⁺, and Cd²⁺) based on the test results. Besides, the detection limits were determined to be 2.12 × 10⁻⁸ M through the standard curve plot. In addition, sensor PHE-Ad shows high selectivity and sensitivity for Hg²⁺ with a fast response in a suitable pH range. Furthermore, taking into account its good “turn-on” fluorescent sensing behavior and low cell cytotoxicity, PHE-Ad was successfully applied to detect and image Hg²⁺ in real water samples and living cells, which shows great potentials for application in environmental and biological systems.     

A bis(rhodamine 6G)-based fluorescent sensor for Hg2+: microwave-assisted synthesis,photophysical properties,and computational studies

A fluorescent and colorimetric sensor based on rhodamine 6 g (RD6g) was designed, synthesized, and characterized using microwave irradiation. The sensing behavior of this compound was studied by UV–visible and fluorescence spectroscopy. Sensor RD6g exhibits a high selectivity and an excellent sensitivity and is a dual-responsive colorimetric and fluorescent Hg²⁺-specific sensor in aqueous buffer solution. Mercury ions give rise to the development of a very fluorescent ring-open amide spirolactam system. The detection limit for Hg²⁺ was found to be 1.2?×?10^?8 M. The binding ratio of RD6g-Hg²⁺ complex was determined to be 1:1 according to the Job’s plot. The reversibility of RD6g?Hg²⁺ complex has been achieved with CN^? anions. The test strip based on RD6g was developed, which could be used as a suitable and methodical Hg²⁺ test kit.

     

A new calix[4]arene Schiff base sensor for Hg<Superscript>2+</Superscript> and Au<Superscript>3+</Superscript>

This article reports the selective sensing ability of a newly synthesized calix[4]arene Schiff base (C4TSB) derivative. C4TSB exhibited strong turn-off fluorescence affinity for Hg²⁺ and Au³⁺. The selective sensing ability of receptor was investigated in the presence of different co-existing competing ions. The limit of detection for Hg²⁺ and Au³⁺ was determined as 1.9 × 10^?5 and 1.0 × 10^?6 M, respectively. Receptor forms 1:1 stoichiometric complex with both metals and their binding constants were calculated as 7.9 × 10³ M^?1 for Hg²⁺ and 5.7 × 10³ M^?1 for Au³⁺. Complexes were also characterized through FT-IR spectroscopy.     

Quantum chemical studies on the role of water microsolvation in interactions between group 12 metal species (Hg2+, Cd2+, and Zn2+) and neutral and deprotonated cysteines

Interactions of group 12 metal(II) species (Hg²⁺, Cd²⁺, Zn²⁺, Hg(H₂O) _n ²⁺ , Cd(H₂O) _n ²⁺ , and Zn(H₂O) _n ²⁺ (n?=?1, 2) with neutral (RSH), deprotonated (RS^?), and doubly deprotonated cysteine species (abbreviated as ??H₂cys??, ??Hcys^???, and ??cys^2???, respectively) are examined with the Becke three-parameter Lee?CYang?CParr (B3LYP) hybrid functional after preliminary screening in a conformation analysis with the Parameterized Model number 3 (PM3) semiempirical method. Effects of water on aqueous solution are evaluated by microsolvation and polarized continuum model (PCM) approaches. In the most stable conformations of M(H₂cys)²⁺ and M(Hcys)⁺ complexes (M?=?Hg²⁺, Cd²⁺, and Zn²⁺), the SH group of the cysteine moiety is already deprotonated and undergoes strong binding with the metal ion. Among Hg(H₂cys)²⁺ complexes, cysteine complexes of Hg²⁺ without deprotonation of the SH group and mercury(II) carboxylato-type structures are at least 83 and 117?kJ/mol less stable in energy than the most stable complex (B3LYP/6-311++G(d,p)-SDD+d+f//B3LYP/6-31G(d)-SDD+d). Although Zn²⁺ binds more strongly than Hg²⁺ to a H₂cys molecule at the high-level CCSD(T)/6-311++G(d,p)-SDD+d+f//B3LYP/6-311++G(d,p)-SDD+d+f level, [Hg(H₂O)₂]²⁺ is stronger than [Zn(H₂O)₂]²⁺ because the deformation of [Zn(H₂O)₂]²⁺ required to bind to cys is much more than in [Hg(H₂O)₂]²⁺. Complexes with a deprotonated cysteine, M(Hcys)⁺ and M(cys), prefer a multidentate structure.     

Sensitive electrochemical DNA-based biosensors for the determination of Ag<Superscript>+</Superscript> and Hg<Superscript>2+</Superscript> ions and their application in analysis of amalgam filling

In the present paper, we used single-stranded poly-T (100% thymine bases) and poly-C (100% cytosine bases) nucleic acids as DNA probes for selective and sensitive individual electrochemical determination of Hg²⁺ and Ag⁺_, respectively, on the multi-walled carbon nanotube paste electrodes (MWCNTPEs) using [Fe(CN)₆]^3?/4? as electroactive labels. In the presence of Hg²⁺ and Ag⁺, the probe–Hg²⁺/Ag⁺ interactions through T–Hg²⁺–T and C–Ag⁺–C complexes formation could cause the formation of a unimolecular hybridized probe. This structure of probe led to its partial depletion from electrode surface and facilitation of electron transfer between [Fe(CN)₆]^3?/4? redox couple and electrode surface, resulting in the enhanced differential pulse voltammetry (DPV) oxidation current of [Fe(CN)₆]^3?/4? at the probe-modified electrode surface. We applied the difference in the oxidation peak currents of [Fe(CN)₆]^3?/4? before and after Hg²⁺/Ag⁺–DNA probe bonding (?I) for electrochemical determination of these heavy metal ions. Detection limits were 8.0?×?10^?12 M and 1.0?×?10^?11 M for Hg²⁺ and Ag⁺ ions determination, respectively. The biosensors were utilized to determine the weight percent of toxic metals, i.e., silver and mercury in dental amalgam filling composition. The results of their practical applicability in analysis of the amalgam sample were satisfactory.     

A Highly Selective Colorimetric Sensor for Cu2+ Based on Phenolic Group Biscarbonyl Hydrazone

A novel copper selective sensor 2 based on hydrazide and salicylaldehyde has been designed and prepared. Sensor 2 behaves a single selectivity and sensitivity in the recognition for Cu²⁺ over other metal ions such as Fe³⁺, Hg²⁺, Ag⁺, Ca²⁺, Zn²⁺, Pb²⁺, Cd²⁺, Ni²⁺, Co²⁺, Cr³⁺ and Mg²⁺ in DMSO. The distinct color change and the rapid changement of fluorescence emission provide naked‐eyes detection for Cu²⁺. The UV‐vis data indicate that 1:2 stoichiometry complex is formed by sensor 2 and Cu²⁺. The association constant K_s was 3.51×10⁴ mol^?1·L. The detection limitation of Cu²⁺ with the sensor 2 was 2.2×10^?7 mol·L^?1. The sensing of Cu²⁺ by this sensor was found to be reversible, with the Cu²⁺‐induced color being lost upon addition of EDTA.     

One stone kills four birds: a novel diazaperinone 12H-pyrazino[2′,3′:3,4]pyrrolo[1,2-a]perimidin-12-one recognizes four different metal ions

A novel diazaperinone 12H-pyrazino[2′,3′:3,4]pyrrolo[1,2-a]perimidin-12-one has been successfully synthesized through a one-step condensation. Single crystal X-ray analysis shows that the product is of planar structure with strong π?π interactions and H-bonding. Interestingly, the 12H-pyrazino[2′,3′:3,4]pyrrolo[1,2-a]perimidin-12-one can recognize three different metal cations Cu²⁺, Ag⁺ and Hg²⁺ via naked eye visualization, and shows turn-on fluorescence for Fe³⁺ and Ag⁺ among the 22 metal cations.     

DNA/Single-Walled Carbon Nanotubes Based Fluorescence Detection of Hg2+

A new, highly selective, and sensitive technique has been developed for the detection of Hg²⁺ using singled-wall carbon nanotubes (SWNTs) and two kinds of oligonucleotides. The fluorescence of the thymine-rich single stranded DNA labeled with dye (the probe ssDNA) was effectively quenched by the SWNTs. In the presence of a target DNA (rich T-T mismatched with probe), the tightness of the DNA wrapping around the SWNTs was loosened. Since binding of Hg²⁺ turned the T-T mismatches to stable T-Hg²⁺-T base pairs, and the binding rate of DNA and the nanotube was lower than that of DNA hybridization, it induced the release of DNA molecules from the SWNTs, and this resulted in a remarkable increase of fluorescence compared to that of the DNA-SWNTs. The assay exhibited a dynamic response range for Hg²⁺ from 4.52 × 10^?8 M to 7.21 × 10^?7 M with a detection limit of 10 nM.     

Toward a highly sensitive and selective indole-rhodamine-based light-up probe for Hg2+ and its application in living cells

We herein designed and synthesized a light-up fluorescent probe L1 for Hg²⁺ species, which is based on indole derivative and Rhodamine fluorophore. The new probe can show a linear response to Hg²⁺ with high sensitivity and selectivity. As the Hg²⁺ concentration changed from 0 to 450 μM, the fluorescence intensity of L1 at 575 nm changed from 50 to 6181 (～120-fold). The detection limit of the probe was 5.0 × 10^?8 M. Besides, we have successfully applied L1 to monitor Hg²⁺ species in living MCF-7 cells by way of fluorescence imaging.     

Silole‐Infiltrated Photonic Crystal Films as Effective Fluorescence Sensor for Fe3+ and Hg2+

We develop a highly effective silole‐infiltrated photonic crystal (PC) film fluorescence sensor with high sensitivity, good selectivity and excellent reproducibility for Fe³⁺ and Hg²⁺ ions. Hexaphenylsilole (HPS) infiltrated PCs show amplified fluorescence due to the slow photon effect of PC because the emission wavelength of HPS is at the blue band edge of the selected PC’s stopband. The fluorescence can be quenched significantly by Fe³⁺/Hg²⁺ ions owing to electron transfer between HPS and metal ions. The amplified fluorescence enhances the sensitivity of detection, with a detection limit of 5 nM for Fe³⁺/Hg²⁺ ions. The sensor is negligibly responsive to other metal ions and can easily be reproduced by rinsing with pure water due to the special surface wettability of PC. As a result, a highly effective Fe³⁺/Hg²⁺ ions sensor based on HPS‐infiltrated PC film has been achieved, which will be important for effective and practical detection of heavy metal ions.     

Highly sensitive and selective determination of Hg2+ by using 3-((2-(1H-benzo[d]imidazol-2-yl)phenylimino)methyl)benzene-1,2-diol as fluorescent chemosensor and its application in real water sample

A new receptor 3-((2-(1H-benzo[d]imidazol-2-yl)phenylimino)methyl)benzene-1,2-diol (1) was synthesised and developed as a highly selective fluorescent chemosensor for the detection of Hg²⁺ in semi-aqueous media. The fluorescence of receptor 1 was dramatically and selectively quenched on complexation with Hg²⁺ ion with the detection limit down to 0.20 μM. The developed sensor was successfully applied for the determination of Hg²⁺ content in water samples. Density Functional Theory (DFT) calculations were performed to study the mechanistic behaviour behind the binding of Hg²⁺ with receptor 1.     

A new fluorogenic mono-ionizable calix[4]arene dansylcarboxamide as a selective chemosensor of soft metal ions, Tl and Hg

A new fluorogenic calix[4]arene containing one pendent N-dansylcarboxamide group has been synthesized. The ligand demonstrates selective optical recognition of Tl⁺ and Hg²⁺ in solvent extraction from aqueous solutions with high content of Na⁺. Complexation of Tl⁺ and Hg²⁺ produces contrasting changes in the fluorescence spectrum of this sensor. Partial cone is the dominant calixarene conformation in the complex with Tl⁺.     

Anthroneamine based chromofluorogenic probes for Hg2+ detection in aqueous solution

Anthroneamine derivatives 1–3 (H₂O:DMSO; 9:1, HEPES buffer, pH 7.0 ± 0.1) undergo highly selective fluorescence quenching with Hg²⁺. The observed linear fluorescence intensity change allows the quantitative detection of Hg²⁺ between 200 nM/40 ppb—12 μM/2.4 ppm even in the presence of interfering metal ions viz. Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cr³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Cd²⁺, Pb²⁺. Probes 1–3 and their Hg²⁺ complexes also show the broad pH resistance for their practical applicability.