Cross-metathesis of allyl halides with olefins bearing an α-alkoxy amide group

We have examined whether the allyl halide cross-metathesis reaction tolerates α-alkoxy amide groups. Ruthenium-based catalysts I-III did not catalyze the cross-metathesis of allyl halides in the presence of an α-alkoxy N,N-dimethylamide group to any appreciable extent, but the reaction could tolerate either a bulky N,N-diisopropylamide or Weinreb amide group. In particular, the Grubbs-Hoveyda-Blechert 2nd generation catalyst (III) efficiently catalyzed the cross-metathesis of allyl halides with olefins bearing a Weinreb amide group.     

Conversion of imine ligands in allyl-nickel(II) complexes

Interaction of Ni(allyl)₂ and bidentate nitrogen-containing ligands (phenanthroline-1,10; bis(2,6-diisopropylphenyl)diazabutadiene) has been studied. It has been shown that coordination of diimine ligands proceeds with transfer of an allylnickel group to the diimine frame and formation of a covalent Ni-N bond giving rise to imine(amide)Ni(II) complexes. In the case of phenanthroline dearomatization of one heteroaromatic ring takes place. The low-spin imine(amide)allyl complexes (allyl)Ni(C₁₅H₁₅N₂) (1) and (allyl)Ni(C₂₉H₄₂N₂) (3) have been isolated as crystals and characterized by solution spectroscopy. Combining two molar equivalents of phenanthroline-1,10 with Ni(allyl)₂ results in the transfer of both allyl groups and formation of the high-spin imine(amide)Ni(II) complex Ni(C₁₅H₁₅N₂)₂ (2).     

General and highly efficient fluorinated-N-heterocyclic carbene–based catalysts for the palladium-catalyzed Suzuki–Miyaura reaction

A general and highly efficient trifluoromethylated-N-heterocyclic carbene (NHC)-based catalyst for the palladium-catalyzed Suzuki–Miyaura reaction was reported. In the presence of the catalyst, reactions of non-activated aryl chlorides and triflates with aryl boronic acids occurred at room temperature with good to excellent yields (63–98%). In addition, catalysts generated from a combination of Pd(OAc)₂/imidazolium salt 6a is not only effective for the coupling of heteroaryl boronic acid with aryl halides and heteroaryl halides, but also efficient for coupling of other heteroaryl halides and heteroaryl boronic acids. Finally, the catalyst is highly effective for Suzuki–Miyaura reaction of aryl bromides and chlorides with 0.01–0.1 mol % loading if the temperature was raised at refluxed THF/H₂O.     

Intramolecular reactions of 2-propynylsilanes with n-acyliminium ions : Cuprate Sn2' reactions of the allenic products as a route to trans-fused carbobicycles

Intramolecular acid-assisted reactions of 2-propynylsilanes with cyclic N-acyliminium ion precursors lead to bridged azabicyclic systems 34–45 (Table I), containing the uncommon α-allenic amide functionality. After introduction of a tert-butoxycarbonyl or a tosyl group onto the lactam nitrogen atom, these molecules react with cuprates in an S_N2' fashion. The products 52–58 (Table II) are angularly functionalized trans-fused carbobicycles containing a 1,3-diene moiety.     

Convergent synthesis of 4,6-unsubstituted 5-acyl-2-aminodihydropyrimidines using Weinreb amide

A method of convergent synthesis of novel 4,6-unsubstituted 5-acyl-2-aminodihydropyrimidines 7 is developed. The synthetic intermediate of 7, 4,6-unsubstituted 2-aminodihydropyrimidines 9 having a Weinreb amide at the 5-position, is prepared by the sequential Staudinger/aza-Wittig/cyclization reactions of (E)-tert-butyl{3-azido-2-[methoxy(methyl)carbamoyl]allyl}carbamate (E)-10. The transformation of the Weinreb amide of 9 to an acyl group proceeds smoothly by a substitution reaction using aryllithiums or alkyllithiums in the presence of a catalytic amount of BF₃ etherate, affording 7 in good to high yield. The N-protecting group of 7 can be easily removed to obtain N-unsubstituted 2-amino-5-acyldihydropyrimidines 8, and the derivatives are observed as a single isomer in ¹H NMR spectroscopy. All dihydropyrimidines in this study were hitherto unavailable and difficult to synthesize by conventional methods.     

Complexation of N-Allyl Derivatives of Morpholinium with Copper(I) Halides: Synthesis and Crystal Structure of [C4H8ON(C3H5)2]+[Cu4Cl5]–, [C4H8ONH(C3H5)]+[CuBr2]–, and [C4H8ONH(C3H5)]+[CuBr1.41Cl0.59]–

The compounds [C₄H₈ON(C₃H₅)₂]⁺[Cu₄Cl₅]^– (I), [C₄H₈ONH(C₃H₅)]⁺[CuBr₂]^– (II), and [C₄H₈ONH(C₃H₅)]⁺[CuBr_1.41Cl_0.59]^– (III) were prepared for the first time by ac electrochemical synthesis from mono- and di-N-allyl derivatives of morpholinium and copper(I) halides in ethanol solution and structurally characterized. In the structure of I π-complex, the centrosymmetric Cu₈Cl₁₀ fragments are associated into layers perpendicular to the b axis. The N,N"-diallylmorpholinium cation functions as a bridge, which coordinates two copper atom of the adjacent inorganic fragments by both allyl groups. The trigonal-pyramidal surrounding of the Cu(I) atom, as well as the distorted tetrahedral coordination sphere of Cu(2), involves three chlorine atoms and the C=C bond, whereas the planar trigonal surrounding of the Cu(3) atom and trigonal-pyramidal surrounding of the Cu(4) atom involve only chlorine atoms. In the isostructural II and III σ-complexes, the edge-shared CuX₄ tetrahedra form the infinite copper-halide chains running along the a axis. The inorganic fragments and organic N-allylmorpholinium cations are united into the three-dimensional crystal structures by N–H···X and C–H···X (X = Cl, Br) hydrogen bonds.     

Selective Cross‐Metathesis of C‐Allyl‐Glycosides

The efficient and selective cross‐metathesis (CM) of both the α‐ and β‐anomers of C‐allyl‐glucose and N‐acetyl‐C‐allyl‐glucosamine with electron‐deficient olefins is reported. The applicability of our CM approach in the synthesis of glycoside‐conjugates is illustrated by the CM of α‐C‐allyl‐glycosamine 2 with uridinyl vinylphosphonate 22, to produce UDP‐GlcNAc analog 23.     

One-pot sequential cross-metathesis/hydride reduction: highly stereoselective synthesis of primary (E)-allylic alcohols from terminal olefins

Several di- and trisubstituted primary (E)-allylic alcohols have been prepared from the corresponding terminal olefins in a highly stereoselective manner (>20:1 E/Z) by sequencing olefin cross-metathesis (CM) with hydride reduction (DIBAL-H) in good yields utilizing only commercially available reagents in a one-pot fashion. The method is a reliable alternative to the direct CM of terminal olefins with allyl alcohol, which is not always stereoselective but rather highly substrate dependent.     

Palladium-catalyzed cascade reactions of benzyl halides with N-allyl-N-(2-butenyl)-p-toluenesulfonamide

Reaction of benzyl halides with N-allyl-N-(2-butenyl)-p-toluenesulfonamide 1 in the presence of a palladium catalyst afforded dihydropyrroles 3 in moderate to excellent yields. It is proposed that the cyclic products were formed via a palladium-catalyzed cascade cyclization-coupling process.     

Regio- and diastereoselective functionalization of (−)-cytisine

(−)-N-Benzyl cytisine has been stereoselectively substituted in moderate to high yields on its carbon 6 (Csp³ α to the pyridone nitrogen). The reaction involved the in situ trapping of the carbanion formed by reaction of lithium diisopropyl amide (LDA) and its reaction with electrophiles (alkyl, allyl, benzyl halides, non-enolizable aldehydes, and Weinreb amide). In the absence of an electrophile or with its addition after the formation of the carbanion, a dimeric structure was isolated (yield: 42%) resulting from the 1,4-addition of the carbanion on the pyridone ring of another cytisine molecule. Deprotection of the benzyl group (Olofson's reagent) allowed the formation of 6-substituted derivatives of the natural product, cytisine, a potent agonist of nicotinic receptors of subtype α₄β₂.     

A new synthesis of amino acids—II: Amidoalkylation of olefins with glyoxylic acid derivatives

A new synthesis of leucine, aspartie acid, aspartic acid semialdehyde and unsaturated N-acyl-α amino acid from olefins and glyoxylic acid-primary amide adducts is described. The chemistry and stereochemistry of the intermediate oxazines 7 and α-amidobutyrolactones 8 is also discussed     

1,1′-Bis(oxazolinyl)ferrocene-based palladium catalysts: Synthesis, X-ray structures and applications in Suzuki and Heck coupling reactions

1,1′-Bis(oxazolinyl)ferrocene-based palladium dichloride complexes 2a and 2b were synthesized. X-ray single-crystal diffraction analyses showed that they are of the N,N′-chelating type, and that the coordination mode of 2a, which has an isopropyl group, is of the cis type, whereas that of 2b, which has a tert-butyl group, is the trans one. These two complexes were employed as catalysts for Suzuki and Heck reactions, and showed high catalytic activities in coupling reactions with various aryl halides and counterparts (phenylboronic acid or n-butyl acrylate). Particularly, the catalyst 2a afforded the coupled product of aryl bromide with phenylboronic acid at room temperature.     

Preparation and characterization of new poly(amide–imide) reinforced layer silicate nanocomposite containing N,N′-pyrromellitoyl-bis-l-phenyl acetic acid

Two new samples of poly(amide–imide)/montmorillonite reinforced nanocomposites containing N,N′-pyrromellitoyl-bis-l-phenyl acetic acid moiety in the main chain were synthesized by a convenient solution intercalation technique. Poly(amide–imide) (PAI) 3 as a source of polymer matrix was synthesized by the direct polycondensation reaction of N,N′-pyrromelitoyl-bis-l-phenyl acetic acid 1 with 4,4′-diamino diphenyl ether 2 in the presence of triphenyl phosphite (TPP), CaCl₂, pyridine and N-methyl-2-pyrrolidone (NMP). Morphology and structure of the resulting PAI-nanocomposite films 4a and 4b with 10% and 20% silicate particles were characterized by FTIR spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The effect of clay dispersion and the interaction between clay and polymeric chains on the properties of nanocomposite films were investigated by using UV–vis spectroscopy, thermogravimetric analysis (TGA) and water uptake measurements.     

Synthesis of novel isoxazolidine analogues of homonucleosides

A general method for the synthesis of nucleobase-derived nitrones 4a–e by treatment of N-(2-oxoethyl)nucleobases with N-methylhydroxylamine is reported. The nitrones 4a–e were applied in the synthesis of isoxazolidine homonucleosides. Moderate diastereoselectivities (de 28–82%) were observed for cycloadditions between nitrones 4a–e and allyl alcohol with cis-isoxazolidines predominating. The stereochemistry of the substituted isoxazolidines was established based on an analysis of 2D NOE experiments for uracil-containing cycloadducts 6a and 7a. Cycloadditions of uracil-based nitrone 4a with vinyl-, allyl-, vinyloxymethyl- and allyloxymethylphosphonates gave the respective phosphonylated cis-isoxazolidines as the major adducts.     

Mono- and dinuclear cyclopalladates as catalysts for Suzuki–Miyaura cross-coupling reactions in predominantly aqueous media

Suzuki–Miyaura cross-coupling reactions of aryl halides with arylboronic acids were performed in predominantly aqueous media employing two mono- and two dinuclear cyclopalladated complexes as catalysts. These complexes are [Pd(HL)Cl] (I), [Pd(L)(PPh₃)] (II), [Pd₂(μ-dppb)(L)₂] (III) and [Pd₂(μ-dppf)(L)₂] (IV); where H₂L, dppb and dppf represent 4-methoxy-N′-(mesitylidene)benzohydrazide, 1,4-bis(diphenylphosphino)butane and 1,1′-bis(diphenylphosphino)ferrocene, respectively. The reactions were conducted using potassium carbonate as base in presence of tetrabutylammonium bromide (TBAB) at 70/90 °C in dimethylformamide–water (1:20) mixture. Among the four catalysts used, the dinuclear complex IV turned out to be the most effective and afforded moderate to excellent yields with broad substrate scope.     

Study of substituent effects on rotational isomers and monomer–dimer equilibria of the 3-carboxy group in 4-substituted (R)-2-(3,4-methylenedioxyphenyl)-6-isopropyloxy-2H-chromen-3-carboxylic acids in dilute CCl4 and CHCl3 solutions by FTIR spectroscopy

FTIR spectra of the title carboxylic acids (I–III) with 4-substituents (H, CH₃ or C₆H₅) and their related compounds IV–VI with 4-(substituted phenyl) groups were measured in dilute CCl₄ and CHCl₃ solutions. The concentration dependence of FTIR spectra of I–IV was also measured in these solutions. These spectra were subjected to curve analysis in order to quantitatively identify the rotational isomers of 3-carboxy group attributable to steric hindrance of the 4-substituents. For I, II and III–VI, two, four and five ν(CO) bands were observed for their carboxy groups, respectively, indicative of monomer–dimer equilibrium and two and three kinds of rotational isomers for II and III–VI, respectively. Compounds III–VI were found to form intra-molecular hydrogen bonds between the trans-type of the 3-carboxy group and the π-electrons in the 4-benzene ring. We have worked out a method to estimate the association constant (K) of complicated monomer–dimer equilibria such as II–VI. The K values of I–IV decrease remarkably in the order of H (I), C₆H₅ (III), CH₃ (II) and C₆H₄-p-OCH₃ (IV) in CCl₄ and I, II, III and IV in CHCl₃; these orders are discussed.     

Rearrangements of the carbanions derived from allyl benzyl thioether

The metalation of allyl benzyl thioether involves the benzylic or the allylic hydrogens. The benzylic carbanion undergoes a rapid[2,3] sigmatropic shift whereas the allylic carbanion gives rise to various rearrangements, among them migration of the allylic unit to the para position with allylic inversion. The temperature dependence of the ratio of products arising from the benzylic carbanion vs those from the allylic carbanion shows that the allylic-to-benzylic carbanion transformation occurs only under special conditions: (a) with slow addition of the base; (b) with thioether in excess relative to the base, and (c) on raising the temperature of the reaction medium from ?78° to ?15°. In the last instance, the proton transfer is intramolecular as shown with labeled thioethers. The extent of the different rearrangements depends on the temperature and solvent. A choice of mechanism cannot be made at this time for the para migration 5→9a. A leaving group effect on the reaction regioselectivity of the carbanion from allyl methyl thioether with benzyl halides has been noticed. The presence of dibenzyl indicates that, in addition to S_N2 reactions, some electron transfer process is occurring.     

Palladium-benzimidazolium salt catalyst systems for Suzuki coupling: development of a practical and highly active palladium catalyst system for coupling of aromatic halides with arylboronic acids

Palladium-benzimidazolium salt catalyst systems have been studied for the Suzuki coupling. A different substitutent effect has been uncovered with respect to nitrogen substituents in the benzimidazolium salts from the palladium-imidazolium salt analogs. A practical and highly active palladium catalyst system, PdCl₂/N,N′-dibenzylbenzimidazolium chloride 2, has been identified for the Suzuki coupling of aromatic halides with arylboronic acids. The coupling of a wide array of aromatic halides with arylboronic acids with the PdCl₂-2 catalyst system gave good to excellent yields. The effective palladium loading could be as low as 0.0001 mol% and 0.01-0.1 mol% for iodide and bromide substrates, respectively. The coupling of unactivated aromatic chlorides with arylboronic acids also gave good results using Cs₂CO₃ as base with a 2 mol% palladium loading. The electronic factors from aromatic halides exert a significant influence on the Suzuki coupling catalyzed by the PdCl₂-2 system while the electronic effect from the arylboronic counterparts is negligible. The aromatic halides with modest steric hindrance could also couple smoothly with phenylboronic acids using the PdCl₂-2 catalyst system.     

The synthesis of a chiral fluoxetine intermediate by catalytic enantioselective hydrogenation of benzoylacetamide

In the presence of a chiral BINAP–ruthenium(II) catalyst, asymmetric hydrogenation of β-keto propanoic acid N-methyl amide under 200 psi of hydrogen pressure furnished the corresponding 3-hydroxypropanoic acid N-methyl amide as the single enantiomer. The product can be used as an intermediate for chiral fluoxetine.     

Copper(I) halide complexes with N,N′-diallyl-N,N,N′,N′-tetramethylethylenediaminium (L2+). Synthesis and crystal structures of the complexes [L0.5CuCl2], [L0.5CuCl0.72Br1.28], and [L0.5CuBr2]

The Eschweiler-Clarke reaction of ethylenediamine with formaldehyde and formic acid yielded N,N,N′,N′-tetramethylethylenediamine, which was alkylated with allyl chloride or allyl bromide to give the corresponding N,N′-diallyl-N,N,N′,N′-tetramethylethylenediaminium (L²⁺) dihalides. In methanolic solutions of copper(II) halide and an appropriate ligand, ac electrochemical synthesis with copper wire electrodes afforded single crystals of Cu(I) complexes with L²⁺: [L_0.5CuCl₂] (I), [L_0.5CuCl_0.72Br_1.28] (II), and [L_0.5CuBr₂] (III). The crystal structures of complexes I–III were determined by X-ray diffraction study. The isostructural crystals of I and II are monoclinic, space group P2₁/n, Z = 4. For I: a = 7.632(4) Å, b = 11.318(5) Å, c = 10.635(5) Å, β = 98.551(7)°, V = 908.4(7) ų. For II: a = 7.7415(7) Å, b = 11.4652(9) Å, c = 10.7267(10) Å, β = 98.351(4)°, V = 942.0(2) ų. The organic cation L²⁺ acts as a bridge linking a pair of separate cuprous halide fragments Cu₂X₄. Although being isostoichiometric with I and II, complex III has a different structure. The crystals of III are monoclinic, space group P2₁/c, a = 6.519(2) Å, b = 9.060(3) Å, c = 16.284(6) Å, β = 97.219(4)°, V = 954.2(6) ų, Z = 4. In structure III, the inorganic fragment forms infinite polymer chains (CuBr ₂ ^? ) _n . The organic and inorganic parts are held together only by electrostatic interactions. Structures I–III are stabilized by hydrogen bonds (C)H…X (2.6–2.9 Å).