Novel nano-structured Pd+yttrium doped ZrO2 cathodes for intermediate temperature solid oxide fuel cells

Novel nano-structured Pd+yttrium doped ZrO₂ (YSZ) electrodes have been developed as cathodes of intermediate temperature solid oxide fuel cells (IT-SOFCs). Nano-sized Pd particles were introduced into the rigid and porous YSZ structure by PdCl₂ solution impregnation. The results show that Pd nanoparticles (20–80 nm) were uniformly distributed in the porous YSZ structure; and such nano-structured composite cathodes were highly active for the O₂ reduction reaction, with polarization resistances (R_E) of 0.11 and 0.22 Ω cm² at 750 and 700 °C and activation energy of 105 kJ mol⁻¹ that is significantly lower than those for the conventional perovskite-based cathodes (130–201 kJ mol⁻¹).     

Synthesis and X-ray structures of heptanuclear and decanuclear mixed-metal sulfido clusters containing noble metals and Group 15 metals

Reactions of incomplete cubane-type clusters [(Cp°RuCl)₂(μ-SH)(μ-SM′Cl₂)] (M′ = Sb (2a), Bi; Cp° = η⁵-C₅Me₄Et) with 0.5 equiv of [PdCl₂(cod)] (cod = 1,5-cyclooctadiene) afforded the corner-shared double cubane-type clusters [{(Cp°Ru)(Cp°RuCl)(μ-SM′Cl₂)}₂(μ₃-S)₂(μ-Cl)₂Pd] (3a: M′ = Sb, 3b: M′ = Bi) in moderate yields, whereas treatment of 2a with 0.75 equiv of [PdCl₂(cod)] gave the corner-shared triple cubane-type cluster [{(Cp°Ru)(Cp°RuCl)(μ-SSbCl₂)(μ₃-S)₂(μ-Cl)₂Pd}₂(Cp°Ru)₂] (4). Single-crystal X-ray analyses have disclosed the detailed structures of novel heptanuclear and decanuclear mixed-metal cores for 3a and 4, respectively.     

A facile preparation of carbon-supported Pd nanoparticles for electrocatalytic oxidation of formic acid

A low temperature approach via the complexing of PdCl₂ with EDTA followed by NaBH₄ reduction has been used to prepare Vulcan XC-72 carbon-supported Pd nanoparticles (Pd/C). The mean particle size of the Pd/C catalysts is found to increase from 3.3 to 9.2 nm with heat-treated temperature. TEM images demonstrated that the Pd nanoparticles are well dispersed on the support with a relatively narrow particle size distribution. A correlation between the electrocatalytic activity of formic acid oxidation and particle size of the Pd/C catalysts indicates that the highest activity of formic acid oxidation is found with a Pd mean particle size of ca. 4.7 nm. The preparation method used here is cost-effective and should be easily scaled for industrial production.     

Palladium and platinum complexes with planar chiral 1,2-disubstituted ferrocenes containing phosphine and thioether donor groups

Three palladium(II) complexes and four platinum(II) complexes having general formula CpFe{1,2-C₅H₃(PPh₂)(CH₂SR)}MCl₂ (M = Pd, R = Ph, Et and tBu; M = Pt, R = Ph, Et, tBu and Cy) have been synthesized by reaction of the corresponding CpFe{1,2-C₅H₃(PPh₂)(CH₂SR)} ligands with PdCl₂(CH₃CN)₂ or PtCl₂(CH₃CN)₂. These complexes have been fully characterized in solution and in solid state. In all cases, monomeric square planar complexes were obtained as pure diastereoisomers.     

Palladium-catalyzed site-selective arylation of symmetric dichlorobenzaldehyde to non-symmetric diaryl benzaldehyde via Suzuki coupling

Arylation of 2,6-dichlorobenzaldehyde by aryl boronic acids via site-selective Suzuki coupling catalyzed by PdCl₂ supported on 4 Å molecular sieves produces 2-aryl-6-chlorobenzaldehyde which on subsequent coupling with a different aryl boronic acid in the presence of Pd(OAc)₂–NHC ligand leads to non-symmetric diaryl benzaldehyde in good overall yield.     

Synthesis of unsymmetrically disubstituted ethynes by the palladium/copper(I)-cocatalyzed sila-Sonogashira–Hagihara coupling reactions of alkynylsilanes with aryl iodides,bromides, and chlorides through a direct activation of a carbon–silicon bond

In this paper, we explore the copper/palladium-cocatalyzed cross-coupling reactions of 1-aryl-2-trimethylsilylethynes with aryl iodides, bromides, and chlorides as coupling partners, to furnish unsymmetrically disubstituted ethynes in moderate to excellent yields. Various aryl iodides were subjected to reaction under the optimized conditions with 5 mol % of Pd(PPh₃)₂ and 50 mol % of CuCl. The steric properties of the aryl iodide proved more influential to the outcome of the cross-coupling reaction than electronic factors. In addition, we succeeded in synthesizing unsymmetrical diarylethynes using two different aryl iodides in one-pot. Furthermore, under the same reaction conditions with 10 mol % of PdCl₂, 40 mol % of P(4-FC₆H₄)₃, and 50 mol % of CuCl as catalyst, we succeeded in synthesizing unsymmetrical diarylethynes from various aryl bromides. Finally, we explored reactions with aryl chlorides and duly discovered that unsymmetrical diarylethynes were obtainable in moderate to good yields when 10 mol % of Pd(OAc)₂, 10 mol % of (?)-DIOP, and 10 mol % of CuCl were used. These reactions proceed through a direct activation of a carbon–silicon bond in alkynylsilanes by CuCl to generate the corresponding alkynylcopper species via transmetalation from silicon to copper. Mechanistic investigations on the reaction of alkynylsilanes with aryl bromides confirmed that the trimethylsilyl bromide generated in situ retarded both transmetalation steps between CuCl and alkynylsilane, and between palladium(II) species formed by oxidative addition and alkynylcopper species.     

Expedient one-pot organometallics-free synthesis of tris(2-pyridyl)phosphine from 2-bromopyridine and elemental phosphorus

2-Bromopyridine reacts with elemental phosphorus (red or white) in a superbasic KOH/DMSO(H₂O) suspension at 100 °C (for red phosphorus) and 75 °C (for white phosphorus) over 3 h to afford tris(2-pyridyl)phosphine in a 62% yield (from red phosphorus) and a 50% yield (from white phosphorus). Under microwave assistance, the reaction with red phosphorus takes just 20 min to produce tris(2-pyridyl)phosphine in 53% yield. A hitherto unknown complex, [Pd(PPy₃)₂Cl₂]·CH₂Cl₂, synthesized from tris(2-pyridyl)phosphine and PdCl₂, has the cis-configuration; this is unusual for bis(phosphino)palladium dichloride complexes.     

Pd Nanostructures with High Tolerance to CO Poisoning in the Formic Acid Electrooxidation Reaction

Pd architectures such as nanobars and nanoparticles were synthetized by the polyol method using di-ethylene glycol as reaction media. The morphology, composition and electrocatalytic properties were investigated by transmission electronmicroscopy (TEM), thermo-gravimetric analysis (TGA), X-ray diffraction (XRD) and electrochemical measurements. The electrocatalytic activity of Pd nanostructures was tested in terms of formic acid electrooxidation reaction (FAOR) in acid media (0.5 M H₂SO₄) and compared with commercial Pd/XC-72 (Pd/C). Results from the electrochemical studies showed that Pdnanobars (PdNB/C) presented higher tolerance to the CO and CO₂ poisoning effect compared with Pd nanoparticles (PdNP/C) and commercial Pd/C. Furthermore, the onset potential toward formic acid electrooxidation at high concentration (1 M) on PdNB/C exhibited a negative shift ca. 100 mV compared with commercial Pd/C. Finally, PdNB/C in the presence of 1 M FA showed a lower poisoning degree compared with commercial Pd/C and PdNP/C.     

Formation of chiral ionic liquids and imidazol-2-ylidene metal complexes from the proteinogenic aminoacid l-histidine

Treatment of the amino acid derivative Bz-His-OMe with excess n-propyl bromide gave the corresponding histidinium salt [Bz-His(n-propyl)₂-OMe⁺Br⁻]. It features a melting point of 39 °C and may serve as a useful readily available optically active ionic liquid. Its subsequent treatment with silver oxide gave the corresponding l-histidine derived chiral N-heterocyclic carbene complex [“(carbene)₂Ag · AgBr₂”]. Transmetallation by treatment with Pd(CH₃CN)₂Cl₂ or [Rh(cod)Cl]₂ led to the formation of the respective chiral late metal imidazol-2-ylidene complexes [“(carbene)₂PdCl₂”] and [“(carbene)RhCl(cod)”], respectively. Four diastereomers of the square planar palladium system were observed. Due to the additional chirality center in the l-histidine-derived “Arduengo-carbene ligand” two diastereomers of the rhodium carbene complex were formed.     

Hydrodechlorination of CCl4 over carbon-supported palladium–gold catalysts prepared by the reverse “water-in-oil” microemulsion method

Two series of carbon-supported Pd–Au catalysts were prepared by the reverse “water-in-oil, W/O” method, characterized by various techniques and investigated in the reaction of tetrachloromethane with hydrogen at 423 K. The synthesized nanoparticles were reasonably monodispersed having an average diameter of 4–6 nm (Pd/C and Pd–Au/C) and 9 nm (Au/C). Monometallic palladium catalysts quickly deactivated during the hydrodehalogenation of CCl₄. Palladium–gold catalysts with molar ratio Pd:Au = 90:10 and 85:15 were stable and much more active than the monometallic palladium and Au-richer Pd–Au catalysts. The selectivity toward chlorine-free hydrocarbons (especially for C₂₊ hydrocarbons) was increased upon introducing small amounts of gold to palladium. Simultaneously, for the most active Pd–Au catalysts, the selectivity for undesired dimers C₂H_xCl_y, which are considered as coke precursors, was much lower than for monometallic Pd catalysts. Reasons for synergistic effects are discussed. During CCl₄ hydrodechlorination the Pd/C and Pd–Au/C catalysts were subjected to bulk carbiding.     

Electrochemical behavior of CO2 reduction on palladium nanoparticles: Dependence of adsorbed CO on electrode potential

The electrochemical reduction of CO₂ is strongly influenced by both the applied potential and the surface adsorption status of the catalyst. In this work a gas diffusion electrode (GDE) coated with Pd nanoparticles/carbon black (Pd/XC72) was used to study the electrochemical reduction of CO₂. Cyclic voltammetric (CV) analysis of Pd/XC72 between 1.5 V and − 0.6 V (vs. RHE) shows the formation of intermediates and the blocking of hydrogen absorption on the Pd nanoparticles (NPs) under a CO₂ atmosphere. The relationships between the Faradaic efficiency/current density and the applied potential reveal that the onset potential of CO formation is around − 0.4 V. Moreover, the presence of adsorbed CO was confirmed through CV analysis of Pd/XC72 under CO₂ and CO/He atmospheres. This demonstrates that H atoms and CO intermediates co-adsorb on the surface of the Pd NPs at an applied potential of around − 0.4 V. When the applied potential is more negative than − 0.6 V, adsorption of CO intermediates on the surface of the Pd NPs becomes dominant.     

Thermochemistry of Pd–In,Pd–Sn and Pd–Zn alloy systems

The standard enthalpy of formation of several Pd–M alloys (M = In, Sn and Zn) has been measured using a high temperature direct drop calorimeter. The reliability of the calorimetric results has been determined and supported by using different analytical techniques: light optical microscopy, scanning electron microscopy equipped with electron probe microanalysis (EPMA with EDS detector) and X-ray powder diffraction analysis. The values of Δ_fH (kJ/mol atoms) for the following phases were obtained for the formation in the solid state at 300 K: PdIn (49 at.%In): ?69.0 ± 1.0; Pd₂In₃ ?57.0 ± 1.0; Pd₃In₇: ?43.0 ± 1.0; PdSn₂: ?50.0 ± 1.0; Pd₂Zn₉ (77 at.%Zn): ?33.7 ± 1.0; Pd₂Zn₉ (78 at.%Zn): ?34.0 ± 1.0; Pd₂Zn₉ (80 at.%Zn): ?35.0 ± 1.0. The results show exothermic values which increase from the Pd–Zn to the Pd–Sn and Pd–In systems; the data obtained have been discussed in comparison with those available in literature.     

Synthesis of L10 Fe–Pd films by electrodeposition and thermal annealing

Fe–Pd alloy films have been prepared by electrochemical deposition from an alkaline electrolyte containing Fe sulfate, Pd chloride and 5-sulfosalicylic acid onto polycrystalline titanium substrates. The as-deposited films were nanocrystalline and magnetically soft (coercivity ∼ 25 Oe). L1₀ Fe–Pd films with a (1 1 1) preferred orientation were obtained by post-deposition thermal annealing of films with composition about 37 at% Fe in an (Ar + 5% H₂) gas flow at 500 °C. Such films exhibit hard magnetic properties, with a coercivity up to 1880 Oe, and a slightly anisotropic magnetic response, with a larger in-plane remanence. Preliminary magnetic investigations support magnetization switching through pinning of domain walls.     

Preparation of a palladium alloy composite membrane supported in a porous stainless steel by vacuum electrodeposition

Pinhole-free palladium/nickel (Pd/Ni) alloy membranes deposited on a porous stainless steel (SUS) support have been fabricated. The deposition was made by vacuum electrodeposition technique which could produce the alloy film less than 1 μm thick. This technique allows for the Pd/Ni alloy by employing Pd/Ni complex reagent, and typical Pd/Ni plating had compositions of 78% Pd and 22% Ni. In order to make the surface smooth and enhance the adhesive bond between the top layer and the substrate, a nascent porous SUS disk was treated sequently with submicron nickel powder and CuCN solution. The important parameters that can affect deposition were pore size, defects, and surface roughness of substrate. The membranes were characterized by permeation experiments with hydrogen and nitrogen at temperatures ranging from 623 to 823 K and pressures from 10.3 to 51.7 cmHg. The composite membranes prepared in this technique yielded excellent separation performance for hydrogen: hydrogen permeance of 5.79×10⁻² cm³/cm² cmHg s and hydrogen/nitrogen (H₂/N₂) selectivity was 4700 at 823 K.     

Synthesis and catalytic properties of cationic palladium(II) and rhodium(I) complexes bearing diphosphinidinecyclobutene ligands

Cationic palladium(II) and rhodium(I) complexes bearing 1,2-diaryl-3,4-bis[(2,4,6-tri-t-butylphenyl)phosphinidene]cyclobutene ligands (DPCB–Y) were prepared and their structures and catalytic activity were examined (aryl = phenyl (DPCB), 4-methoxyphenyl (DPCB–OMe), 4-(trifluoromethyl)phenyl (DPCB–CF₃)). The palladium complexes [Pd(MeCN)₂(DPCB–Y)]X₂ (X = OTf, BF₄, BAr₄ (Ar = 3,5-bis(trifluoromethyl)phenyl)) were prepared by the reactions of DPCB–Y with [Pd(MeCN)₄]X₂, which were generated from Pd(OAc)₂ and HX in MeCN. On the other hand, the rhodium complexes [Rh(MeCN)₂(DPCB–Y)]OTf were prepared by the treatment of [Rh(μ-Cl)(cyclooctene)₂]₂ with DPCB–Y in CH₂Cl₂, followed by treatment with AgOTf in the presence of MeCN. The cationic complexes catalyzed conjugate addition of benzyl carbamate to α,β-unsaturated ketones.     

Synthesis,characterization and X-ray crystal structure determination of cyclopalladated [Csp2,N,N′]−, zwitterionic and chelated compounds in the reaction of 3,5-diphenyl-N-alkylaminopyrazole derived ligands with Pd(II)

The synthesis of two N-alkylaminopyrazole ligands, 1-[2-(diethylamino)ethyl]-3,5-diphenylpyrazole (L1) and 1-[2-(dioctylamino)ethyl]-3,5-diphenylpyrazole (L2), is reported. These ligands present, a priori, one pyrazole nitrogen and one amine nitrogen as potential donor atoms. However, in the reaction of the ligands (L1 and L2) with [PdCl₂(CH₃CN)₂] one of the C_phenyl atoms can also behave as a donor atom. As a result, we have obtained the formation of three different compounds for each one of the ligands: chelated ([PdCl₂(L)] L = L1 (1a), L2 (2a)), zwitterionic ([PdCl₃(LH)] LH = LH1 (1b), LH2 (2b)), and cyclopalladated compounds ([PdCl(LC)] (LC = LC1 (1c), LC2 (2c)). The solid-state structures for 1a, 1b and 1c were determined by single crystal X-ray diffraction methods. The potentially [C,N,N′]^? ligand is coordinated through the N_pz and the N_amino to the metal atom for 1a, through the N_pz for 1b, and through the N_pz, the N_amino and a C_phenyl for 1c.     

Synthesis of aryl alkynyl carboxylic acids and aryl alkynes from propiolic acid and aryl halides by site selective coupling and decarboxylation

The coupling of propiolic acid with aryl iodides afforded the aryl alkynyl carboxylic acids and aryl alkynes in generally good yields. Aryl alkynyl carboxylic acids were obtained when the reaction was performed in the presence of Pd(PPh₃)₂Cl₂ (2.5 mol %), dppb (5.0 mol %) and DBU (5 equiv) at 50 °C. For the synthesis of the terminal aryl alkynes, the reaction was conducted in the presence of Pd(PPh₃)₂Cl₂ (2.5 mol %), dppb (5.0 mol %), DBU (5.0 equiv), and Cu(acac)₂ (10 mol %) at 25 °C for 5 h, and further reacted at 60 °C for 6 h.     

Phosphino-(α-sulfinylalkyl)phosphonium ylide complexes (Rh,Pd) with a configurationally stable asymmetric ylidic carbon

The synthesis and structure of Rh(I) and Pd(II) complexes of chiral P,C-chelating phosphino-(α-sulfinylalkyl)phosphonium ylide ligands with a trisubstituted asymmetric ylidic center P⁺–C1R(S1(O)p-Tol)–M (R = alkyl group) have been investigated, and compared to those of the analogous disubstituted ylide complexes (R = H). Reaction of the ethyl onium ylide of o-bis(diphenylphosphino)benzene with (?)-menthyl-(S)-p-tolylsulfinate afforded the corresponding racemic erythro phosphino-(α-sulfinylethyl)phosphonium in 90% de (R = Me). The racemization process is interpreted by a Berry-like pseudorotation mechanism driven by the steric repulsion between the α-methyl substituent and the bulky menthyloxy S-substituent or sulfur lone pair in the intermediate ylide-sulfinyl adduct. The ylide of phosphino-(α-sulfinylethyl)phosphonium reacts with [Rh(cod)₂][PF₆] and PdCl₂(MeCN)₂ to afford the corresponding P,C1-chelated threo-Rh(I) and erythro-Pd(II) mononuclear complexes in 70% yield and total diastereoselectivity. These respective complexes act as efficient catalytic precursors for the hydrogenation of (Z)-α-acetamidocinnamic acid and allylic substitution of 3-acetoxy-1,3-diphenyl-1-propene with sodium dimethyl malonate. The bonding features of the erythro-Pd(II) complex exhibiting a sulfinyl O?Pd interaction are studied theoretically at the DFT level using ELF and MESP analyses. The η²-P,C haptomeric form of the ylide ligand is estimated to compete at 19% with the η¹-C haptomeric form dominating at 81%.     

Synthesis of coin-like hollow carbon and performance as Pd catalyst support for methanol electrooxidation

The coin-like hollow carbon (CHC) has been synthesized by only using ethanol as the carbon source with a novel Mg/NiCl₂ catalytic system via a facile solvothermal method for the first time. The CHC synthesized at optimized conditions shows an average thickness of less than 154 nm and the coin diameter of 1–3 μm. The CHC is characterized by SEM, TEM, XRD and electrochemical techniques. Pd on CHC (denotes as Pd/CHC) electrocatalysts are prepared for methanol oxidation in alkaline media. The Pd/CHC electrocatalyst gives a mass activity of 2930 A g⁻¹ Pd for methanol oxidation against 870 A g⁻¹ Pd on Pd/C electrocatalyst. One main reason for the higher mass activity of the Pd/CHC is the higher electrochemical active surface area (EASA) of the Pd/CHC.     

Dimeric and monomeric palladium(II) parent-amido (NH2) complexes: Synthesis,characterization, and reactivity

The treatment of [PdL₃(NH₃)]OTf (L₃ = (PEt₃)₂(Ph) (1), (2,6-(Cy₂PCH₂)₂C₆H₃) (3)) with NaNH₂ in THF afforded dimeric and monomeric parent-amido palladium(II) complexes with bridging and terminal NH₂, respectively, anti-[Pd(PEt₃)(Ph)(μ-NH₂)]₂ (2) and Pd(2,6-(Cy₂PCH₂)₂C₆H₃)(NH₂) (4). The dimeric complex 2 crystallizes in the space group P2₁/n with a = 13.228(2) Å, b = 18.132(2) Å, c = 24.745(2) Å, β = 101.41(1)°, and Z = 4. It has been found that there are two crystallographically independent molecules with Pd(1)–Pd(2) and Pd(3)–Pd(4) distances of 2.9594 (10) and 2.9401(9) Å, respectively. The monomeric amido complex 4 protonates from trace amounts of water to give the cationic ammine species [Pd(2,6-(Cy₂PCH₂)₂C₆H₃)(NH₃)]⁺. Complex 4 reacts with diphenyliodonium triflate ([Ph₂I]OTf) to give aniline complex [Pd(2,6-(Cy₂PCH₂)₂C₆H₃)(NH₂Ph)]OTf (5). Reaction of 4 with dialkyl acetylenedicarboxylate (DMAD, DEAD) yields diastereospecific palladium(II) vinyl derivative (Z)–(Pd(Cy₂PCH₂)₂C₆H₃)(CR = CR(NH₂)) (R = CO₂Me (6a), CO₂Et (6b)). Reacting complexes 6a and 6b with p-nitrophenol produces (Pd(Cy₂PCH₂)₂C₆H₃)(OC₆H₄–p-NO₂) (8) and cis-CHR = CR(NH₂), exclusively.