Cyclen-based bismacrocycles for biological anion recognition. A potentiometric and NMR study of AMP, ADP and ATP nucleotide complexation

The behaviour of two cyclen-based bismacrocycles linked by aromatic spacers as receptors of adenosine monophosphate (AMP), adenosine diphosphate (ADP) and adenosine triphosphate (ATP) anions is explored. The two bismacrocycles differ from one another by the nature of their spacers, which are respectively 1,3-dimethylbenzene (BMC), or 2,6-dimethylpyridine (BPyC). Potentiometric investigations supported by (1)H and (31)P NMR measurements were performed over a wide pH range to characterize and understand the driving forces implicated in the supramolecular assemblies. A comparison is also carried out with the results presented in this work and those obtained previously with these two ligands and inorganic phosphates. The comparison exhibits the importance of pi-stacking capability of the organic anions in the binding and hydrogen-bonding network. For BPyC, NMR studies highlight two coordination schemes depending on the protonation of the nitrogen atom of the pyridinyl spacer, which acts in acidic media as a supplementary anchoring point.     

[n]Cycloparaphenylene-Pillar[5]arene Bismacrocycles: Their Circularly Polarized Luminescence and Multiple Guest Recognition Properties

Both pillar[n]arenes (P[n]As) and [n]cycloparaphenylenes ([n]CPPs) play an important role in supramolecular chemistry. Herein, we report the precise synthesis of two multifunctional bismacrocycles [n]CPP-P[5]A by integrating P[5]A into the [n]CPP backbone. The photoluminescence quantum yield (Φ_F) of the bismacrocycles was found to show a dramatic increase relative to the corresponding [n]CPPs. The chiral enantiomers (pR)/(pS)-[8]CPP-P[5]A were successfully isolated by chiral HPLC, and showed promising properties of circularly polarized luminescence (g_lum≈0.02). In addition, [n]CPP-P[5]A bismacrocycles are capable of binding pyridinium salts and fullerene derivatives with high affinity and specificity within the two distinct cavities. Transient absorption studies showed that photo-induced electron transfer occurs in [10]CPP-P[5]A⊃C₆₀ complex. Our results suggest that [n]CPP-P[5]A are potentially useful in CPL-active materials, multiple guest recognition and supramolecular polymer preparation.     

A facile and efficient synthetic approach to novel lariat macrocyclic diamides and bis macrocyclic diamides

The hydroxy macrocycles 8, 19a‐c were prepared in 40–55% yields by reacting the dipotassium salts 2a‐c with each of epichlorohydrin ( 7 ) and bis(chloromethyl) derivative 18 . Acylation of the hydroxyl group of each of 8, 19a‐c with 2‐chloroacetylchloride ( 9 ) in DMF gave the corresponding esters 10, 20a,b . Reaction of the latter with different amines as well as phenoxides furnished exclusively the target lariat macrocycles 13a‐c, 22a‐c and 23a‐c in 60–63% and 50–55% yields, respectively. Amination of two equivalents of the chloroacetyloxy derivative 10 and 2a,b with 1 equiv. of piperazine ( 12c ) afforded the corresponding bismacrocycles 14 and 26a,b respectively, in 60–65% yields. Moreover, the novel bis(macrocycles) 27–29 were prepared in 45–50% yields, respectively, by reacting each of 20a,b with the dipotassium salts 2b, 24 and 25 respectively, in DMF.     

Novel [2]catenane structures introducing communication between transition metal centers via pi...pi interactions

[2]Catenane systems containing copper(II) and nickel(II) as metal centers have been self-assembled using tetraazamacrocyclic complexes and benzo-24-crown-8 as building blocks. A variety of methods, including X-ray crystallography, ESI mass spectrometry, (13)C and (1)H NMR, and electrochemistry, were applied to characterize these new face-to-face bismacrocyclic systems. Weak pi...pi interactions introduced by interlocking transition metal complexes with benzocrown moieties were shown to increase the communication (cooperativity) of metal centers. Introduction of the benzocrown increases the stability of the mixed valence state of the macrocyclic complex, which is reflected in high values of conproportionation constants. Moreover, this effect was found to be stronger than that obtained by shortening the length of the spacer between the two tetraazamacrocyclic subunits in the parent bismacrocycles. The extent of communication is larger for the nickel catenane than for the copper one.     

Alkyl and aryl substituted corroles. 3. Reactions of cofacial cobalt biscorroles and porphyrin-corroles with pyridine and carbon monoxide

The synthesis and characterization of three new cofacial biscorroles and three new linked Co(II) porphyrins and Co(III) corroles with the same face to face orientation are described. The biscorroles are represented as (BCS)Co(2), (BCO)Co(2), (BCX)Co(2) while the porphyrin-corrole dyads are represented as (PCA)Co(2), (PCB)Co(2), (PCO)Co(2) where BC represents the Co(III) cofacial biscorroles and PC represents the porphyrin-corrole complexes which are linked to each other by a dibenzothiophene (S), dibenzofuran (O), or 9,9-dimethylxanthene (X) bridge in the case of the corroles and an anthracene (A), biphenylene (B), or dibenzofuran (O) bridge in the case of the mixed macrocycle derivatives. The electrochemical and spectroscopic data on these new bismacrocycles are compared to those of previously reported biscorroles of the type (BCA)Co(2) and (BCB)Co(2). The CO and/or pyridine binding properties of each biscorrole and porphyrin-corrole in CH(2)Cl(2) are also presented. Only one CO ligand is bound axially to each corrole unit of the bismacrocycle but five- and six-coordinate pyridine complexes can be generated for the same compounds, with the exact stoichiometry depending upon the concentration of pyridine in solution. In all cases, the six-coordinate bispyridine corrole complex can be unambiguously identified by a strong diagnostic marker band located at 598-601 nm. The formation constants for pyridine binding to the biscorroles range from log K(1) = 3.14 to 5.08 while log K(2) ranges from 1.10 to 2.61 depending upon the specific spacer. Carbon monoxide binding constants range from log K = 3.6 to 4.0 in the case of the biscorroles and from log K = 3.4 to 4.1 in the case of the porphyrin-corrole dyads. These values also depend on the specific spacer in the complex and, like the pyridine binding constants, decrease in the order BCO > BCA > BCB for the biscorroles and PCO > PCA > PCB for the porphyrin-corrole complexes.     

A metal-organic bilayer open framework with a dynamic component: single-crystal-to-single-crystal transformations

A metal-organic bilayered open framework, [Ni2(C26H52N10)]3[BTC]4.6C5H5N.36H2O (BOF-1, 1), has been prepared by the self-assembly of a new bismacrocyclic nickel(II) complex [Ni2(C26H52N10)(Cl)4].H2O (A) and sodium 1,3,5-benzenetricarboxylate (Na3BTC) in the mixture of water/DMSO/pyridine. The X-ray crystal structure of 1 shows that 2D layers with the cavities of brick-wall motifs (22.6 x 14.3 A2) are formed by the coordination of the nickel(II) complex with BTC3- ions and that the two 2D layers are linked with the p-xylyl bridging groups of the bismacrocycles as pillars to generate 3D channels in the bilayered framework. The voids of the channels occupy 61% of the total volume, which are filled with pyridine and water guest molecules. When 1 was dried at 75 degrees C for 1.5 h, [Ni2(C26H52N10)]3[BTC]4.4H2O (2) resulted by maintaining the single-crystallinity, which exhibited a dramatic decrease in the interlayer spacing as well as changes in the cell parameters. Solid 2 differentiates various alcohols such as MeOH, EtOH, isopropyl alcohol, and benzyl alcohol in toluene. When 1 was immersed in insoluble solvents such as pyridine and benzene, some guest molecules were exchanged with the aromatic molecules to give [Ni2(C26H52N10)]3[BTC]4.20pyridine.6H2O (3) and [Ni2(C26H52N10)]3[BTC]4.14benzene.19H2O (4), respectively. The guest-exchange processes also involve single-crystal-to-single-crystal transformation.     

Synthesis and photophysical properties of meso-substituted bisporphyrins: comparative study of phosphorescence quenching for dioxygen sensing

The 4,6-bis(10-mesityl-5,15-di-p-tolylporpyrinyl)dibenzothiophene (H4DPSN) free base was obtained in five steps from commercially available materials. The metalation of DPSN2- with zinc(II), copper(II), and palladium(II) led to three new homobimetallic systems, (Zn)2DPSN, (Cu)2DPSN, and (Pd)2DPSN, respectively. The cofacial structures of these molecules offer the possibility of having dioxygen molecules inside the cavity for a period of time, allowing dynamic (collisional) phosphorescence quenching to be more efficient. The bimolecular excited-state deactivation rate constant for deactivation by dioxygen (kQ: (Pd)2DPB, 2.98x10(9); (Pd)2DPSN, 3.99x10(9); (Pd)2DPX, 6.94x10(9); (Pd)TPP, 8.95x10(9); (Pd)2DPS, 8.95x10(9) M-1 s-1) of (Pd)2DPSN, which exhibits an intense phosphorescence at 699 nm, was compared to those observed for (Pd)TPP, (Pd)2DPS, (Pd)2DPX, and (Pd)2DPB (TPP2-=tetraphenylporphyrin dianion, DPS4-=4,6-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]dibenzothiophene tetraanion, DPX4-=4,5-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]-9,9-dimethylxanthene tetraanion, and DPB4-=1,8-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]biphenylene tetraanion). These collision-induced deactivation data were interpreted by estimating a series of physical parameters such as the surface area and bisporphyrin radii, the diffusion coefficient of the bismacrocycles, and the theoretical deactivation efficiency for the five compounds addressing the role of steric hindrance of the macrocycles on each other and the aryl groups at the meso positions. For sensing purposes, (Pd)2DPX is characterized by a Stern-Volmer constant kSV of 2.91x10(6) M-1, placing the lower detection limit for [O2] in solution at 0.58 ppm, which is better than that for (Pd)TPP (kSV=2.31x10(6) M-1; lower detection limit of 0.73 ppm), the classically used monoporphyrin complex.     

Modulation of the singlet-singlet through-space energy transfer rates in cofacial bisporphyrin and porphyrin-corrole dyads

A new series of relatively flexible cofacial donor-acceptor dyads for singlet-singlet energy transfer with the corrole or etio-porphyrin free base and zinc porphyrin as the acceptor and donor, respectively, were synthesized and characterized (represented as (PMes2COx)ZnH3 (13), (PMes2CO)ZnH3 (14), and (PMes2CX)ZnH3 (15)) where (PMes2COx = [2-[5-(5,15-dimesitylcorrol-10-yl)-diphenylether-2'-yl]-13,17-diethyl-2,3,7,8,12,18-hexamethylporphyrin]), (PMes2CO = [5-[5-(5,15-dimesitylcorrol-10-yl)-dibenzofuran-4-yl]-13,17-diethyl-2,3,7,8,12,18-hexamethylporphyrin]), and (PMes2CX = [5-[5-(5,15-dimesitylcorrol-10-yl)-9,9-dimethylxanthen-4-yl)]-13,17-diethyl-2,3,7,8,12,18-hexamethylporphyrin]), respectively) along with the homobismacrocycles (DPOx)ZnH2 (17) and (DPOx)Zn2 (18) (where (DPOx = 2,2'-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]diphenylether) as comparison standards. The rate for energy transfer (kET) extracted by the measurements of fluorescence lifetimes are of the same order of magnitude as those recently reported for the rigidly held face-to-face dyads ((DPB)ZnH2 (1), (DPX)ZnH2 (2), (DPA)ZnH2 (3), (DPO)ZnH2 (4), and (DPS)ZnH2 (5) where (DPB = 1,8-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]biphenylene), (DPX = 4,5-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]-9,9-dimethylxanthene), (DPA = 1,8-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]anthracene), (DPO = 4,6-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]dibenzofuran), and (DPS = 4,6-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]dibenzothiophene), respectively), but for the first time, it is shown that the presence of a bulky group located between the acceptor and the donor moiety influences the transfer rate. The presence of perpendicular mesityl groups on the acceptor macrocycle prevents the two macrorings from interacting strongly; therefore, kET is slower. On the other hand, by rendering the rigid spacer flexible (i.e., changing the dibenzofuran rigid spacer to the flexible diphenylether assembling fragment), kET increases due to stronger intermacrocycle interactions. This study is complemented by DFT computations (B3LYP/3-21G*) as a molecular modeling tool where subtle structural features explain the changes in kET. During the course of this study, X-ray structures of 17 and 18 were investigated and exhibit a linear stacking of the bismacrocycles where intermolecular porphyrin-porphyrin interactions are observed (dinter(Zn...Zn) = 4.66 and 4.57 A, for 17 and 18, respectively).     

Role of the spacer in the singlet-singlet energy transfer mechanism (Förster vs Dexter) in cofacial bisporphyrins

The cofacial bisporphyrins H4DPS (DPS = 4,6-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]dibenzothiophene), H4DPO (DPO = 4,6-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]dibenzofuran), H4DPX (DPX = 4,5-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]-9,9-dimethylxanthene), H4DPA (DPA = 1,8-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]anthracene), and H4DPB (DPB = 1,8-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]biphenylene) have been monometalated by Zn(OAc)2.2H2O and by GaCl3 to explore the singlet-singlet energy transfer from the photoexcited metal porphyrin center to the linked free base porphyrin. The spectroscopic (UV-vis and fluorescence) and photophysical properties (fluorescence lifetimes, tauF, and quantum yields, phiF) have been investigated at 298 and 77 K in degassed 2-MeTHF for the donor-acceptor systems, (Zn)H2DPS, (Zn)H2DPO, (Zn)H2DPA, (Zn)H2DPX, and (Zn)H2DPB, as well as for the bis-zinc complexes, (Zn)2DPS, (Zn)2DPO, (Zn)2DPX, and (Zn)2DPB, respectively, and the monoporphyrin derivatives, H2P, (Zn)P, and (Ga-OMe)P (P2- = 5-phenyl-2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrin-dianion). The singlet-singlet energy transfer rate constants (KET) were obtained using KET = (1/tauF -1/tauFo), where tauFo is the fluorescence lifetime of the corresponding bis-zinc(II) systems (or (Zn)P and (Ga-OMe)P) where no energy transfer occurs. The tauF value for three bis-zinc(II) compounds varies from 1.69 to 2.01 ns and is 1.84 (at 298 K) and 3.20 ns (at 77 K) for (Ga-OMe)P. In the donor-acceptor bismacrocycles, depending on the spacer and the temperature, the fluorescence lifetimes decrease down to 50-240 ps. The KET values range from approximately 4 to approximately 21 (ns(-1)) and have been analyzed considering both the F?rster and the Dexter mechanisms. Using the C(meso)-C(meso) distance parameters in the calculations, the F?rster and Dexter mechanisms operate for DPS and DPO, and for DPA, DPX, and DPB spacer systems, respectively. The limit distance where one mechanism dominates over the other is estimated to be around 5-6 A.     

The polarographic determination of copper and zinc in plants and soils

A method is described whereby the extraction and polarisation of copper and zinc with maximum, sensitivity is possible. Interference from cobalt is prevented by extracting with dithizonc in the presence of dimethylglyoxime.The supporting electrolyte used is dccimolar potassium hydrogen phthalate which permits satisfactory waves for both copper and zinc (with greater sensitivity for copper, than is the case with the ammonia-ammonium chloride electrolyte).     

Liquid chromatographic assay of phenothiazine, thioxanthene and butyrophenone neuroleptics and antihistamines in blood and plasma with conventional and radial compression columns and UV and electrochemical detection

An assay strategy for determining a wide range of phenothiazine, thioxanthene and butyrophenone neuroleptics and antihistamines both alone and in combination in blood and plasma is described. The general method employs liquid chromatography with both conventional and radial compression nitrile bonded columns. Detection is by ultraviolet absorption spectrophotometry or by amperometry depending on the concentrations to be measured. Ultraviolet absorption is suitable down to 10 ng/ml. Below this level amperometry is preferable. The various compounds are used as internal standards for each other. The lower limit of detection is approximately 0.1 ng ml-1 with 10-ml sample. The with-run coefficient of variation is a maximum of 7.3%.     

Separation and determination of mixtures containing p-aminosaucylic add and m-aminophenol

A procedure is described for separating and determining p-anunosalicylie add and m-aminophenol m mixtures. Separation is effected by passing a solution of the mixture in dimethylformamide through a column of strong cation-exchange resin. The eluate containing the p-aminosalicylic acid is titrated with sodium methoxide. The m-aminophénol is eluted from the column with ethanolic HC1. The eluate is evaporated to dryness, the residue dissolved in acetic acid, and the solution titrated with perchloric add.     

Molecular structures and conformations: Experiment and theory

Theoretical calculations in combination with experimental gas phase structure research can be performed in two ways. The first is to support and improve experimental analyses by including additional data from theoretical calculations. This is to the advantage of the experiment. The second way is a comparison of geometric structures and conformational properties obtained with different theoretical methods with the experimental result. This comparison indicates which theoretical method or methods are suitable for a specific compound. This approach is to the advantage of the theory. © 1998 John Wiley & Sons, Inc. J Comput Chem 19: 123–128, 1998     

Colorimetric and gravimetric determination of silicon in titanium and titanium alloys

Improved colorimetric and gravimetric methods are proposed for the determination of silicon in titanium and titanium alloys. In the colorimetric method the sample is dissolved in hydrofluoric acid. boric acid added and the; titanium oxidized with hydrogen peroxide and permanganate. The bulk of the titanium is precipitated as a crystalline precipitate by heating in boiling water, and the molybdenum color developed. A portion of the solution is filtered and the transmittance measured. In the gravimetric method the sample is fumed with milfuric acid. the silica ignited and fused with aodium carbonate, The silica is then dehydrated with perchloric acid. Thecolorimetric method is recommended for 0.003 to 1.5% silicon, and the gravimetric method for 0.3 to 5% silicon.     

Tetradehydroadamantane-1,3,5,7-di- and tetracations and their helium and hydride inclusion complexes: spherical aromaticity and evidence for a bonding interaction between carbon and helium

The unusual stability of the experimentally known 1,3-dehydro-5,7-adamantyl dication was previously explained by four-center two-electron aromaticity with three-dimensional (tetrahedral) topology. Magnetic criteria (ACID and ring-current analysis) now demonstrate that there is also a very strong contribution from hyperconjugation with all six methylene bridges. The delocalized system of electrons thus includes all valence electrons, and the structure, therefore, should rather be described as a spherically aromatic 50-electron system. The corresponding Td-symmetric tetracation with 48 electrons is antiaromatic and not a minimum structure. With a He atom or a hydride ion at the center of the cage, the tetracation is predicted to form a kinetically stable complex. Magnetic criteria demonstrate that the antiaromaticity is greatly reduced, and a bond analysis hints at bonding interactions between He (and H-) and the carbon atoms of the adamantane cage.     

Interactions of mono- and divalent metal ions with aspartic and glutamic acid investigated with IR photodissociation spectroscopy and theory

The interaction of metal ions with aspartic (Asp) and glutamic (Glu) acid and the role of gas-phase acidity on zwitterionic stability were investigated using infrared photodissociation spectroscopy in the spectral range 950-1900 cm (-1) and by hybrid density functional theory. Lithium ions interact with both carbonyl oxygen atoms and the amine nitrogen for both amino acids, whereas cesium interacts with both of the oxygen atoms of the C-terminus and the carbonyl oxygen of the side chain for Asp. For Glu, this structure is competitive, but a structure in which the cesium ion interacts with just the carbonyl oxygen atoms is favored and the calculated spectrum for this structure is more consistent with the experimentally measured spectrum. In complexes with either of these metal ions, both amino acids are non-zwitterionic. In contrast, Glu*Ca (2+) and Glu*Ba (2+) both adopt structures in which Glu is zwitterionic and the metal ion interacts with both oxygens of the C-terminal carboxylate and the carbonyl oxygen in the side chain. Assignment of the zwitterionic form of Glu is strengthened by comparisons to the spectrum of the protonated form, which indicate spectral features associated with a protonated amino nitrogen. Comparisons with results for glutamine, which adopts nearly the same structures with these metal ions, indicate that the lower Delta H acid of Asp and Glu relative to other amino acids does not result in greater relative stability of the zwitterionic form, a result that is directly attributed to effects of the metal ions which disrupt the strong interaction between the carboxylic acid groups in the isolated, deprotonated forms of these amino acids.     

Efficient and reliable numerical integration of exchange-correlation energies and potentials

An adaptive numerical integrator for the exchange-correlation energy and potential is presented. It uses the diagonal elements of the exchange-correlation potential matrix as a grid generating function. The only input parameter is the requested grid tolerance. In combination with a defined cell function the adaptive grid generation scales almost linear with the number of basis functions in a system. With the adaptive numerical integrator the self-consistent field energy error, which is due to the numerical integration of the exchange-correlation energy, converges with increasing adaptive grid size to a reference value. The performance of the adaptive numerical integration is analyzed using molecules with first, second, and third row elements. Especially for transition metal systems the adaptive numerical integrator shows considerably improved performance and reliability.     

Thermodynamic and kinetic characterization of host-guest association between bolaform surfactants and alpha- and beta-cyclodextrins

The thermodynamics and kinetics of formation of host-guest complexes between a series of bolaform surfactants of type C n Me 6 (2+)2Br (-) ( n = 8, 10, and 12) and alpha-cyclodextrin and beta-cyclodextrin were studied with the aid of isothermal titration calorimetry (ITC) at 298.15 and 308.20 K. The association constant, the enthalpy, and the entropy of formation were determined. The obtained thermodynamic parameters are compared with parameters for the micelle formation of a related cationic surfactant. The difference in magnitude and sign between the parameters of the alpha-CD and beta-CD complexes is discussed based on the curvature of the cavity of the CD. We suggest that the water molecules inside the alpha-CD cavity are not able to maintain their hydrogen bond network. Upon complex formation these water molecules are expelled and reform their hydrogen bond network. The situation is different in the larger beta-CD cavity where water has the possibility of a more extensive hydrogen bonding. The kinetics for alpha-CD is slow, associated with high activation energies for both association and dissociation of the complex. The rates increased with a decrease in the number of methylene groups in the hydrocarbon chain. The slow kinetics is argued to originate from the fact that the charged headgroup needs to be pushed through a relative nonpolar cavity. A comparison is made with the Born energy.     

Surface films and metallurgy related to lubrication and wear

The nature of the tribological surface is identified and characterized with respect to adhesion, friction, wear, and lubricating properties. Surface analysis is used to identify the role of environmental constituents on tribological behavior. The effect of solid to solid interactions for metals in contact with metals, ceramics, semiconductors, carbons, and polymers is discussed. The data presented indicate that the tribological surface is markedly different than an ideal solid surface. The environment is shown to affect strongly the behavior of two solids in contact. In certain instances, the environment can dominate surface characteristics. With metals in contact with metals, adhesion is found to be related to the cohesive binding energy. Strong adhesive bonding occurs for metals in contact with ceramics, semiconductors, carbons, and polymers. Bond strength at the interface is, with some exceptions, stronger than the bond strength of the cohesively weaker of the two materials. Many different surface properties of metals and alloys influence tribological performance. These include (1) surface energy, (2) crystallographic orientation, (3) amorphous versus the crystalline state, (4) grain boundaries, (5) texturing of the surface, (6) crystal structure, and (7) order-disorder transformations. At sufficiently high loads or sliding velocities, metals or alloy surfaces are shown to undergo recrystallization effecting tribological properties. The chemical valency, d-valence-bond characteristics, of metal surfaces affect adhesion, friction, and wear. The greater the percent d-bond character, the lower the friction and wear. The ideal tensile and shear strengths of simple transition metals correlate with friction coefficients. Results presented also show that small amounts of alloying elements in base metals can alter markedly adhesion, friction, and wear by segregating to the solid surface.     

Kinetics and mechanisms of chlorine dioxide and chlorite oxidations of cysteine and glutathione

Chlorine dioxide oxidation of cysteine (CSH) is investigated under pseudo-first-order conditions (with excess CSH) in buffered aqueous solutions, p[H+] 2.7-9.5 at 25.0 degrees C. The rates of chlorine dioxide decay are first order in both ClO2 and CSH concentrations and increase rapidly as the pH increases. The proposed mechanism is an electron transfer from CS- to ClO2 (1.03 x 10(8) M(-1) s(-1)) with a subsequent rapid reaction of the CS* radical and a second ClO2 to form a cysteinyl-ClO2 adduct (CSOClO). This highly reactive adduct decays via two pathways. In acidic solutions, it hydrolyzes to give CSO(2)H (sulfinic acid) and HOCl, which in turn rapidly react to form CSO3H (cysteic acid) and Cl-. As the pH increases, the (CSOClO) adduct reacts with CS- by a second pathway to form cystine (CSSC) and chlorite ion (ClO2-). The reaction stoichiometry changes from 6 ClO2:5 CSH at low pH to 2 ClO2:10 CSH at high pH. The ClO2 oxidation of glutathione anion (GS-) is also rapid with a second-order rate constant of 1.40 x 10(8) M(-1) s(-1). The reaction of ClO2 with CSSC is 7 orders of magnitude slower than the corresponding reaction with cysteinyl anion (CS-) at pH 6.7. Chlorite ion reacts with CSH; however, at p[H+] 6.7, the observed rate of this reaction is slower than the ClO2/CSH reaction by 6 orders of magnitude. Chlorite ion oxidizes CSH while being reduced to HOCl, which in turn reacts rapidly with CSH to form Cl-. The reaction products are CSSC and CSO3H with a pH-dependent distribution similar to the ClO2/CSH system.