1D Azido bridged Cu(II) coordination polymer with 1,3-oxazolidine ligand as an effective catalyst for green click synthesis of 1,2,3-triazoles

A new 1D azido bridged Cu(II) coordination polymer with 1,3-oxazolidine based ligand, [Cu(H₃L)(μ_1,3-N₃)(N₃)]_n ( 1 ), was synthesized and characterized by elemental analysis and spectroscopic methods. The structure of 1 was also determined by single crystal X-ray analysis which indicated the 1D polymeric chain is generated by end-to-end (EE) azide bridge. The obtained compound was employed as catalyst in green click synthesis of β-hydroxy-1,2,3-triazoles from one-pot three-component cycloaddition reaction of epoxide-azide-alkyne. The catalytic reactions were carried out in water as a safe, cheap and green solvent. The catalytic studies indicated that the obtained 1D azido bridged Cu(II) coordination polymer is an active catalyst for preparing β-hydroxy-1,2,3-triazoles. The effect of temperature on the selectivity of the catalytic system was studied and the results indicated this catalytic system has high selectivity at low temperatures. The structure the product obtained from the reaction of 2,3-epoxypropylphenylether, azide and 1-ethynyl-1-cyclohexanol ( T4 ) was determined by single crystal X-ray analysis. The results indicate Cu(II) coordination polymers can be a new class of catalytic systems for green click synthesis of 1,2,3-triazoles.     

A reusable polymer‐supported copper(I) catalyst for triazole click reaction on water: An experimental and computational study

In the search for establishing a clickable copper‐catalysed (3 + 2) Huisgen azide–alkyne cycloaddition (CuAAC) reaction under strict conditions, in particular in terms of preventing the presence of copper particles/traces in reaction products and using an environmentally benign medium such as water, we describe here the synthesis of an aminomethyl polystyrene‐supported copper(I) catalyst (Cu(I)‐AMPS) and its characterization by means of Fourier transform infrared and energy‐dispersive X‐ray spectroscopies and scanning electron microscopy. Cu(I)‐AMPS was found to be highly active in the CuAAC reaction of various organic azides with alkynes affording the corresponding 1,4‐disubstituted 1,2,3‐triazoles in a regioselective manner in air at room temperature and using water as solvent. The insolubility and/or partial solubility of the organic azide and alkyne precursors as well as the heterogeneous Cu(I)‐AMPS catalytic system points to the occurrence of the cycloaddition at the organic–water interface ‘on water’ affording quantitative yields of water‐insoluble 1,2,3‐triazoles. A mechanistic study was performed using density functional theory aiming at explaining the observed reactivity and selectivity of the Cu (I)‐AMPS catalyst in CuAAC reactions.     

Dual roles of substituted thiourea as reductant and ligand in CuAAC reaction

A highly efficient catalytic system, CuSO₄·5H₂O/1-(4-methoxyphenyl)-3-phenylthiourea, for the copper(I)-catalyzed azide–alkyne cycloaddition reaction (CuAAC) was discovered. In the above catalytic system, substituted thiourea acts both as a reductant and a ligand. CuSO₄·5H₂O/1-(4-methoxyphenyl)-3-phenylthiourea is both an economical and efficient catalyst for the CuAAC reaction. In addition, the new catalytic system has advantageous features including mild and green reaction conditions, and broad substrate compatibility. A variety of 1,4-disubstituted 1,2,3-triazoles have been prepared with good to excellent yields with the CuSO₄·5H₂O/1-(4-methoxyphenyl)-3-phenylthiourea catalytic system in aqueous solution.     

Double Cu-Catalyzed Direct Csp3−H Azidation/CuAAC Reaction: A Direct Approach towards Demanding Triazole Conjugates

The first one-pot procedure for the double copper(I)-catalyzed oxidative Csp³−H azidation–CuAAC process, implying unstable azide intermediates and easy-to-remove reagents under water-tolerant conditions, is presented. The combination of tert-butyl hydroperoxide as oxidant and TMSN₃ as azide source for the C−H bond azidation, which produces harmless side-products such as tBuOH and H₂O, probed to be perfectly compatible with the following cycloaddition step. Highly demanding 1,2,3-triazoles could be then directly obtained in good overall yields by extraction or simple crystallization, thus avoiding chromatography purifications. The potential of this methodology, has also being highlighted by the successful reaction of alkynes presenting interesting complex biological moieties based for example on biotin, DNA base or cinchona alkaloid units.     

Synthesis of new trifluoromethyl peptidomimetics with a triazole moiety

gem-Chloroamine CF₃CH(Cl)NHAc 1 reacts in a one-pot sequence with NaN₃ to afford trifluoromethyl azido compound 2 and further undergoes a Huisgen 1,3-dipolar cycloaddition with alkynes to yield 1,4-disubstitued 1,2,3-triazoles. The reaction is catalyzed by Cu(II) species (Cu(OAc)₂, 10 mol %) without any reducing agent, and the corresponding products are afforded in high yields (74-87%). This process offers thus an entry to new trifluoromethyl pseudopeptides.     

Copper-catalyzed azide-alkyne cycloaddition reaction in water using cyclodextrin as a phase transfer catalyst

1,4-Disubstituted-1,2,3-triazoles were obtained in excellent yields from azides and terminal alkynes in H(2)O in the presence of catalytic amount of β-cyclodextrin as a phase transfer catalyst. Also, a one-pot CuAAC reaction was carried out successfully, affording 1,4-disubstituted-1,2,3-triazoles in good to high yields starting from an alkyl bromide, sodium azide, and terminal alkyne.     

Spinel copper ferrite nanoparticles: Preparation,characterization and catalytic activity

The magnetic CuFe₂O₄ nanoparticles have been synthesized and characterized by various spectroscopic methods, including X‐ray diffraction (XRD), O K, Cu and Fe K ‐edge X‐ray absorption near edge structure (XANES), energy dispersive X‐ray analysis (EDX), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The azide‐alkyne cycloaddition by the reaction of various phenylacetylenes with a mixture of benzyl halides and NaN₃ and also three component (A³) coupling reaction of aldehyde, alkyne and amine catalyzed by CuFe₂O₄ nanoparticles under aerobic conditions led to the formation of the 1,4‐disubstituted‐1,2,3‐triazoles and propargylamines in excellent yields. The catalyst can be recovered by applying an external magnetic field for the subsequent cycloaddition reactions and reused without any tangible loss in catalytic efficiency.     

Facile One-Pot Synthesis of 1,2,3-Triazoles Featuring Oxygen,Nitrogen, and Sulfur Functionalized Pendant Arms

A practical and efficient one-pot synthesis of novel 1,2,3-triazoles featuring nitrogen, oxygen, and sulfur functionalized pendant arms has been developed. The click reaction of mono-propargyl derivatives supported by aniline, thiophenol, and benzyl alcohol, with sodium azide and p-substituted benzyl halogenides, renders a series of N-substituted-1,2,3-triazoles in good yields under mild reaction conditions. The catalyst system was based in Cu(OAc)₂ · H₂O, sodium L-ascorbate, and 1,10-phenanthroline monohydrate, and all reactions were performed in a mixture H₂O–ethanol (4:1 v/v). Additionally, the preparation of bis-1,2,3-triazoles supported by di-propargylated aniline was carried out, demonstrating the versatility of the present methodology.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Synthesis,characterization and catalytic properties of tetrachlorocuprate(II) immobilized on layered double hydroxide

Readily prepared copper(II) immobilized on layered double hydroxide has been found to effectively catalyse the 1,3‐dipolar cycloaddition (CuAAC) of a variety terminal alkynes and benzyl azides generated in situ from sodium azide and benzyl halides furnishing the corresponding 1,2,3‐triazoles in excellent yields. The advantages of the protocol are short reaction time, mild reaction conditions, reusability of the catalyst and applicability to a wide range of substrates.     

Chain‐Growth Click Polymerization of AB2 Monomers for the Formation of Hyperbranched Polymers with Low Polydispersities in a One‐Pot Process

Hyperbranched polymers are important soft nanomaterials but robust synthetic methods with which the polymer structures can be easily controlled have rarely been reported. For the first time, we present a one‐pot one‐batch synthesis of polytriazole‐based hyperbranched polymers with both low polydispersity and a high degree of branching (DB) using a copper‐catalyzed azide–alkyne cycloaddition (CuAAC) polymerization. The use of a trifunctional AB₂ monomer that contains one alkyne and two azide groups ensures that all Cu catalysts are bound to polytriazole polymers at low monomer conversion. Subsequent CuAAC polymerization displayed the features of a “living” chain‐growth mechanism with a linear increase in molecular weight with conversion and clean chain extension for repeated monomer additions. Furthermore, the triazole group in a linear (L) monomer unit complexed Cu^I, which catalyzed a faster reaction of the second azide group to quickly convert the L unit into a dendritic unit, producing hyperbranched polymers with DB=0.83.     

New 1,2,3-Triazoles from (R)-Carvone: Synthesis,DFT Mechanistic Study and In Vitro Cytotoxic Evaluation

Aseries of novel 1,4-disubstituted 1,2,3-triazoles were synthesized from an (R)-carvone terminal alkyne derivative via a Cu (I)-catalyzed azide–alkyne cycloaddition reaction using CuSO₄,5H₂O as the copper (II) source and sodium ascorbate as a reducing agent which reduces Cu (II) into Cu (I). All the newly synthesized 1,2,3-triazoles 9a–h were fully identified on the basis of their HRMS and NMR spectral data and then evaluated for their cell growth inhibition potential by MTS assay against HT-1080 fibrosarcoma, A-549 lung carcinoma, and two breast adenocarcinoma (MCF-7 and MDA-MB-231) cell lines. Compound 9d showed notable cytotoxic effects against the HT-1080 and MCF-7 cells with IC₅₀ values of 25.77 and 27.89 µM, respectively, while compound 9c displayed significant activity against MCF-7 cells with an IC₅₀ value of 25.03 µM. Density functional calculations at the B3LYP/6-31G* level of theory were used to confirm the high reactivity of the terminal alkyne as a dipolarophile. Quantum calculations were also used to investigate the mechanism of both the uncatalyzed and copper (I)-catalyzed azide–alkyne cycloaddition reaction (CuAAC). The catalyzed reaction gives complete regioselectivity via a stepwise mechanism streamlining experimental observations. The calculated free-energy barriers 4.33 kcal/mol and 29.35 kcal/mol for the 1,4- and 1,5-regioisomers, respectively, explain the marked regioselectivity of the CuAAC reaction.     

One‐Pot,Three‐Component Synthesis of 1‐(2‐Hydroxyethyl)‐1H‐1,2,3‐triazole Derivatives by Copper‐Catalyzed 1,3‐Dipolar Cycloaddition of 2‐Azido Alcohols and Terminal Alkynes under Mild Conditions in Water

A safe, efficient, and improved procedure for the regioselective synthesis of 1‐(2‐hydroxyethyl)‐1H‐1,2,3‐triazole derivatives under ambient conditions is described. Terminal alkynes reacted with oxiranes and NaN₃ in the presence of a copper(I) catalyst, which is prepared by in situ reduction of the copper(II) complex 4 with ascorbic acid, in H₂O. The regioselective reactions exclusively gave the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazoles in good to excellent yields. This procedure avoids the handling of organic azides as they are generated in situ, making this already powerful click process even more user‐friendly and safe. The remarkable features of this protocol are high yields, very short reaction times, a cleaner reaction profile in an environmentally benign solvent (H₂O), its straightforwardness, and the use of nontoxic catalysts. Furthermore, the catalyst could be recovered and recycled by simple filtration of the reaction mixture and reused for ten consecutive trials without significant loss of catalytic activity. No metal‐complex leaching was observed after the consecutive catalytic reactions.     

Chain-growth polymerization of azide–alkyne difunctional monomer: Synthesis of star polymer with linear polytriazole arms from a core

This article reports a chain-growth coupling polymerization of AB difunctional monomer via copper-catalyzed azide–alkyne cycloaddition (CuAAC) reaction for synthesis of star polymers. Unlike our previously reported CuAAC polymerization of AB _n (n ≥ 2) monomers that spontaneously demonstrated a chain-growth mechanism in synthesis of hyperbranched polymer, the homopolymerization of AB monomer showed a common but less desired step-growth mechanism as the triazole groups aligned in a linear chain could not effectively confine the Cu catalyst in the polymer species. In contrast, the use of polytriazole-based core molecules that contained multiple azido groups successfully switched the polymerization of AB monomers into chain-growth mechanism and produced 3-arm star polymers and multi-arm hyperstar polymers with linear increase of polymer molecular weight with conversion and narrow molecular weight distribution, for example, M_w/M_n ~ 1.05. When acid-degradable hyperbranched polymeric core was used, the obtained hyperstar polymers could be easily degraded under acidic environment, producing linear degraded arms with defined polydispersity. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 84–90     

One-potCuAAC synthesis of (1H-1,2,3-triazol-1-yl)methyl-1,3,4/1,2,4-oxadiazoles starting from available chloromethyl-1,3,4/1,2,4-oxadiazoles

The one-pot CuAAC synthesis of (1H-1,2,3-triazol-1-yl)methyl-1,3,4-oxadiazole and (1H-1,2,3-triazol-1-yl)methyl-1,2,4-oxadiazole derivatives via three-component reaction of consequent nucleophilic substitution of chlorine, with azide, and its further “click” reaction, with alkynes, in the presence of CuI was studied. The utility of newly synthesized 2-(azidomethyl)-1,3,4/1,2,4-oxadiazoles and chloromethyl-1,3,4/1,2,4-oxadiazole derivatives was explored, and their limitations were determined. Novel 5-([4-aryl-1H-1,2,3-triazol-1-yl]methyl)-3-(aryl)-1,2,4-oxadiazoles, 2-([4-aryl-1H-1,2,3-triazol-1-yl]methyl)-5-(aryl)-1,3,4-oxadiazoles were obtained in good yields.     

Three-component assembly of 5-halo-1,2,3-triazoles via aerobic oxidative halogenation

An effective synthetic protocol for 5-halo-1,2,3-triazoles was developed by novel TBDMSCl (tert-butyldimethylsilyl chloride)-activated aerobic oxidative halogenations in this Letter. TBDMSCl, for the first time, was found to activate aerobic oxidation of CuX to produce X₂ with Cu⁺ which then could effectively promote one-pot syntheses of 5-halo-1,2,3-triazole from alkyne, azide, and CuX (X = I, Br) under O₂ atmosphere at room temperature. The advantages in this method include inexpensive and green O₂ as oxidant, use of mild and non-oxidative additive, and wide scope of substrates.     

A stereoselective method for the synthesis of enantiopure 3-substituted 4-hydroxyproline derivatives via 1,3-dipolar cycloadditions

The stereoselective 1,3-dipolar cycloaddition between (Z)-1,4-dichloro-2-butene and a menthone-derived nitrone led to the corresponding isoxazolidine. Regioselective azidation of a single chlorine atom followed by another Cu(I)-catalyzed azide–alkyne 1,3-dipolar cycloaddition (CuAAC) induced enantiopure 1,2,3-triazolyl-functionalized isoxazolidines. The subsequent acidic cleavage of the menthone chiral auxiliary and reductive cleavage of the isoxazolidine N–O bond triggered an intramolecular cyclization through the displacement of the second chlorine. This rapid and stereoselective synthetic strategy provided reliable access to a series of enantiopure 3-substituted 4-hydroxyproline derivatives.     

Claycop/hydrazine: A new and highly efficient recyclable/reusable catalytic system for 1,4‐disubstituted‐1,2,3‐triazole synthesis under solvent‐free conditions

Clay‐supported copper(II) nitrate (claycop) has been used as an efficient catalyst for azide–alkyne cycloaddition reactions leading to 1,4‐disubstituted 1,2,3‐triazoles. The highly efficient claycop/hydrazine hydrate catalytic system affords triazoles in a few minutes (1–20 min) at room temperature, under mild and solvent‐free conditions. High regioselectivity, excellent yields, ease of claycop synthesis and recyclability/reusability of the catalyst are considered as practical merits of the protocol.     

A one‐pot method for synthesis of reduced graphene oxide‐supported Cu–Cu2O and catalytic application in tandem reaction of halides and sodium azide with terminal alkynes

Reduced graphene oxide (RGO)‐supported Cu–Cu₂O nanocomposite material (Cu‐Cu₂O@RGO) was prepared through a one‐pot reflux synthesis method. The morphology, crystal structure and composition of the prepared Cu‐Cu₂O@RGO were characterized using transmission electron microscopy, X‐ray diffraction, and X‐ray photoelectron, infrared and Raman spectroscopies. Cu‐Cu₂O@RGO as a heterogeneous catalyst was applied to tandem reactions of halides and sodium azide with terminal alkynes to synthesize effectively 1,4‐disubstituted 1,2,3‐triazoles. Moreover, the catalyst showed excellent recyclability performance with very little leaching of the metal. Compared with homogeneous catalysts, Cu‐Cu₂O@RGO as a green and efficient catalyst was recoverable, easy to separate and highly stable in the tandem method for the synthesis of 1,2,3‐triazole compounds.     

Highly controlling selectivity of copper(I)-catalyzed azide/alkyne cycloaddition (CuAAC) between sulfonyl azids and normal alkynes or propynoates

In this article, a combination of Cu(OAc)₂·H₂O/2-aminophenol was developed as a highly efficient and controlling catalytic system for sulfonyl azids involved CuAAC. By using this catalytic system, sulfonyl azids reacted with normal alkynes or propynoates to selectively give the ring products or the chain products, respectively, in excellent yields within minutes. HOAc in situ produced in the reaction has been proved to be a super protonation reagent, by which the unstable intermediate 5-cuprated 1,2,3-triazole was protonated efficiently to yield ring-product 1-sulfonyl 1,2,3-trizoles. The control experiments also proved that 2-aminophenol played dual roles as both ligand and reductant, which led to the cheap and chemically stable Cu(OAc)₂·H₂O being an efficient copper source for our purpose.     

On the Mechanism of Copper(I)‐Catalyzed Azide–Alkyne Cycloaddition

The copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction regiospecifically produces 1,4‐disubstituted‐1,2,3‐triazole molecules. This heterocycle formation chemistry has high tolerance to reaction conditions and substrate structures. Therefore, it has been practiced not only within, but also far beyond the area of heterocyclic chemistry. Herein, the mechanistic understanding of CuAAC is summarized, with a particular emphasis on the significance of copper/azide interactions. Our analysis concludes that the formation of the azide/copper(I) acetylide complex in the early stage of the reaction dictates the reaction rate. The subsequent triazole ring‐formation step is fast and consequently possibly kinetically invisible. Therefore, structures of substrates and copper catalysts, as well as other reaction variables that are conducive to the formation of the copper/alkyne/azide ternary complex predisposed for cycloaddition would result in highly efficient CuAAC reactions. Specifically, terminal alkynes with relatively low pK_a values and an inclination to engage in π‐backbonding with copper(I), azides with ancillary copper‐binding ligands (aka chelating azides), and copper catalysts that resist aggregation, balance redox activity with Lewis acidity, and allow for dinuclear cooperative catalysis are favored in CuAAC reactions. Brief discussions on the mechanistic aspects of internal alkyne‐involved CuAAC reactions are also included, based on the relatively limited data that are available at this point.