A convenient one-pot synthesis of 4-amino-3-arylpyrazoles from α-phthaloylaminoacetophenones

Condensation of α-phthaloylaminoacetophenones 1a-c with N,N-dimethylformamide dimethyl acetal afforded the novel enamines 3a-c. Cyclization of 3 with hydrazine, alkylhydrazine or phenylhydrazine salts (4a-d) gave 4-phthaloylamino-3-arylpyrazoles 7–9 in high yields. Deprotection of 7–9 was accomplished with hydrazine to provide 4-amino-3-arylpyrazoles 5 in good yields.     

Effective synthesis of methyl 3β-amino-3-deoxybetulinate

A practical method for preparing methyl 3β-amino-3-dexoybetulinate that is based on column chromatographic separation of 3α- and 3β-t-butoxycarbonates and subsequent removal of the protecting group using formic acid is proposed. The structure of methyl 3β-N-(t-butoxycarbonyl)-3-deoxybetulinate was established by an x-ray structure analysis. Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 488–490, September-October, 2008.     

Influence of the synthesis parameters on the thermal behavior of some ZnO–starch composites

Ten ZnO–starch composites were synthesized using a simple precipitation methodology. The IR spectroscopy and XRD investigations reveal the presence of amorphous starch and crystalline ZnO. The obtained composites present a spherical morphology, 5–8 spheres being interconnected into aggregates. The thermal analysis demonstrates that starch decomposition and ZnO thermally induced nucleation and crystal growth depending on the synthesis parameters such as starch processing (dissolution or gelatinization), reaction temperature (80, 90, and 100 °C), reaction time (15 min or 6 h), and applied treatments (heating or ultrasound irradiation).     

Stereo- and regioselective synthesis of β-amino-β-tetrazolylvinylphosphonates

Addition of 5-substituted tetrazoles to dimethyl [(N,N-diisopropylamino)ethynyl]phosphonate proceeds regio- and stereoselectively to yield (Z)-[2-diisopropylamino-2-(tetrazolyl)vinyl]phosphonic acid dimethyl esters. The Z-configuration of the products was confirmed by ¹Н NMR spectroscopy and single-crystal X-ray diffraction. The reactions occur via nucleophilic attack of tetrazole involving predominantly the N-1 atom of the tetrazole ring.     

Dibenzylaminoacetates as useful synthetic equivalents of glycine in the synthesis of α-amino-β-hydroxyacids1

The stereochemical course of three new simple methodologies for the preparation of α-amino-β-hydroxyacids starting from dibenzylaminoacetates as synthetic equivalents of glycine is described. While the aldol-type condensation via lithium enolates gave results highly dependent on the aldehyde employed, producing in some cases diastereoselectivities up to 5:1 for the anti isomers, the acid-catalysed aldol condensation of silyl ketene acetals yielded predominantly syn adducts with selectivities from 5:1 to 32:1. Finally the acylation-reduction procedure gave the best results in terms of yields and stereoselectivities, affording syn isomers with excellent induction (⩾ 13 : 1).     

Microwave-assisted synthesis of 6-amino-β-cyclodextrins

A general microwave-assisted procedure for the synthesis of 6-amino-β-cyclodextrins is reported. Mono-tosyl-β-cyclodextrin was used as the starting material in a one-pot route employing a solvent-free microwave-assisted reaction with a liquid amine. Shorter reaction times were observed for the formation of 6-amino-β-cyclodextrins using this novel microwave approach compared to the thermal procedure.     

A highly efficient method for the α,β-dehydrogenation of α-amino esters and α-amino-β-diesters

N-monochlorination of N-unprotected α-amino esters and α-amino-β-diesters was efficiently and very simply effected by using inexpensive effervescent sodium dichloroisocyanurate tablets for water disinfection in a biphasic organic solvent-water system. Subsequent dehydrochlorination provided α,β-didehydroaminoacid esters, whose hydrogenation would allow the starting compounds to be easily racemized.     

Effect of steric factors on the keto-cis-trans-enol equilibrium of α-acetylcycloalkaneacetic esters

Summary With the aid of atomic models the structures of -acetylcyclohexane-, -acetylcyclopentane-, and -acetyl-cyclobutane-acetic esters were examined, and an explanation is proposed for the observed proportions of the tautomeric forms.     

Influence of chiral thiols on the diastereoselective synthesis of γ-lactams from cyclic anhydrides

The synthesis of γ-lactams from both four-component and imine-anhydride reactions is reported. The synthesis of 2-phenylcyclohexanethiol is described and this compound was evaluated along with an additional seven chiral thiols. A range of selectivity and yields was observed and comparisons to established reactions are made in order to account for the observed reactivity.     

Influence of temperature on the adsorption of α-tocopherol from ethanol solutions on acid-activated clinoptilolite tuff

Patterns in the adsorption of α-tocopherol on acid-activated clinoptilolite tuff at 283, 295, 305, and 333 K are established and explained. It is found that the selectivity of the sorbent toward the vitamin rises as the temperature of the process falls. The adsorption of α-tocopherol from dilute solutions is described in terms of the Langmuir adsorption theory. It is shown that the fixing of vitamin E monolayers in the structural matrix of clinoptilolite tuff is due to the formation of hydrogen bonds between isolated silanol groups of the adsorbent and oxygen atoms of the chromane ring and the phenol residue of α-tocopherol. The thermodynamic functions of monolayer adsorption of the vitamin are estimated. It is concluded that the formation of polymolecular layers in the form of associates is due to hydrophobic interactions between side substituents of α-tocopherol.     

Stereoselective allylation reactions of acyclic and chiral α-amino-β-hydroxy aldehydes 3: Total synthesis of (+)-1-epi-castanospermine

Stereoselective allylation reactions of acyclic, chiral α-amino-β-hydroxy aldehydes containing four contiguous stereocenters were conducted. Allylation mediated by MgBr₂?OEt₂ afforded the anti-product. A plausible mechanism of the allylation reaction is also described. The resulting allylation product was used for the total synthesis of (+)-1-epi-castanospermine.     

Influence of process parameters on the sol–gel synthesis of nano hydroxyapatite using various phosphorus precursors

Hydroxyapatite Ca₁₀(PO₄)₆(OH)₂ has attracted widespread interest from both orthopedic and dental fields due to its excellent biocompatibility and tissue bioactivity properties. Since nanophase materials can mimic the dimensions of constituent components of natural tissues, the implants developed from nanophase material could serve as a successful alternative. However, the defects of hydroxyapatite ceramics, mainly brittleness and low fracture toughness, have been overcome by the use of nanophase hydroxyapatite coatings on the implant surfaces that integrate the good mechanical properties of metals and the bioactivity of hydroxyapatite. In the present investigation, Sol?Cgel hydroxyapatite was prepared from two different phosphorus precursors such as triethyl phosphate and phosphorus pentoxide respectively with calcium nitrate tetrahydrate as a calcium precursor. The effects of pH and liquid P³¹ Nuclear Magnetic Resonance spectroscopy for the solution aged at different periods were investigated and the synthesized hydroxyapatite powder was characterized by Transmission electron microscopy, X-ray Powder Diffraction, Fourier transform infrared spectroscopy and thermal analysis respectively. In order to fully understand the bioactivity of the synthesized materials, they were coated on 316L Stainless Steel implant surface by spin coating method at the spin speed of 2,000 Revolutions per minute. The effect of nanoparticles on the surface of 316L Stainless Steel implant was studied by adhesive strength measurements. The corrosion resistance property of the hydroxyapatite coatings was evaluated by electrochemical impedance analysis. From the results, it was observed that the hydroxyapatite coatings obtained from different precursors have very high resistance to corrosion with higher adhesive strength.     

Analytical techniques for the detection of α-amino-β-methylaminopropionic acid

The non-protein amino acid L-α-amino-β-methylaminopropionic acid (BMAA) has been linked to several neurodegenerative diseases. Its presence in trace amounts in complex sample such as bacterial, plant and mammalian tissue extracts and hydrolyzates makes analysis a complicated process requiring good analytical technique. There are conflicting reports in the literature regarding the presence or absence of BMAA in key samples, but the absence of standardized or validated methods makes comparison of the disparate findings difficult to compare. This critical review will summarize the historic and recent literature, and provide suggestions for improving the methods currently in practice.     

A novel scalable and stereospecific synthesis of 3α- and 3β-amino-5α-androstan-17-ones and 3α- and 3β-amino-5α-pregnan-20-ones

A novel scalable stereoselective synthesis of 3α- and 3β-amino-5α-androstan-17-ones and 3α- and 3β-amino-5α-pregnan-20-ones has been developed using phthalimide based Mitsunobu chemistry. In all four cases, the products were isolated as single diastereoisomers in high chemical yield and purity without the need for chromatography at any stage in their syntheses.     

Diastereoselective syntheses of α-amino-β-hydroxyesters precursors of the ribosyl-diazepanone core of the liposidomycins

The diastereoselective syntheses of the O-protected ribosyl-β-hydroxy-α-amino esters 3 and 4, precursors of α-ribosyl-diazepanone core analogues of the liposidomycins, respectively, from the β-ketoesters 5 and 6 are described. The anti relationship between the two adjacent aminated and hydroxylated carbons was controlled by sequential hydrogenation of the β-ketoesters in the presence of chiral ruthenium catalysts and electrophilic amination of the resulting β-hydroxyesters.     

Influence of heme periphery on the electronic structure and Mössbauer parameters of hemoglobin

For the five-coordinated complexes of ferroprotoporphynynn with imidazole, a quantum-chemical analysis of the electronic structure and Mossbauer spectral parameters has been canied out. Peripheral substituents (CH3, Cf13, C₂H₄COOH) were introduced into the porphynin macrocycle to model the real chemical structure of protopo'phynynn in the heme group of desoxyhemoglobin. The calculations have shown that near the occupation border in the complaes there are MO which are due to the -systems of the CH= CM₂ and CH₂CH₂COOH substituents. The orientalion of the vinyl fragments has a considerable effect on the populations of the Fe d-orbitals and the quadrupole splitting E_Q for the⁵B₁ and⁵B₂ terns.Institute of Biophysics, Ministry of Health, Russian Federation. Translated fromZhurnal Strukturmoi Khimii, Vol. 34, No. 5, pp. 90–93, September–October, 1993.Translated by L. Smolina     

Trifluoroacetic acid-promoted synthesis of 3-hydroxy, 3-amino and spirooxindoles from α-keto-N-anilides

Ketoanilides containing alkyl side chains were readily cyclized to 3-hydroxy-2-oxindoles or spirooxindoles by a single or double intramolecular Friedel-Crafts reaction in the presence of trifluoroacetic acid (TFA) at room temperature or at 45 °C. α-Iminocarboxamides, generated in situ from ketoamides, cyclized similarly to 3-aminooxindoles under identical conditions.     

Enantioselective synthesis of 2-amino-4H-pyrans via the organocatalytic cascade reaction of malononitrile and α-substituted chalcones

An organocatalytic cascade reaction of malononitrile and α-substituted chalcones has been developed for the synthesis of chiral multisubstituted 2-amino-4H-pyran derivatives. A series of chiral primary/tertiary amines and cinchona alkaloids were examined as the catalysts. Quinine was found to be the most efficient catalyst in the absence of any additive. The α-substitutents of the chalcones had a siginificant effect on the yield and the enantioselectivity. A number of multisubstituted 2-amino-4H-pyrans were obtained in excellent yields and enantioselectivities.     

A continuous-flow synthesis of annulated and polysubstituted furans from the reaction of ketones and α-haloketones

A synthesis of di-, tri- and tetra-substituted furans from reaction of the corresponding ketones and α-haloketones with LiHMDS is reported. Reaction under continuous-flow conditions gave increased yields and removed the need for external cooling when compared to the unoptimised batch conditions.