Chromatographic separation of neodymium isotopes by using chemical exchange process

The neodymium isotope effects were investigated in Nd–malate ligand exchange system using the highly porous cation exchange resin SQS-6. The temperature of the chromatographic columns was kept constant at 50 °C by temperature controlled water passed through the columns jackets. The separation coefficient of neodymium isotopes, ?’s, was calculated from the isotopic ratios precisely measured by means of an ICP mass spectrometer equipped with nine collectors as ion detectors. The separation coefficient, ? × 10⁵, were calculated and found to be 1.4, 4.8, 5.4, 10.6, 16.8 and 20.2 for ¹⁴³Nd, ¹⁴⁴Nd, ¹⁴⁵Nd, ¹⁴⁶Nd, ¹⁴⁸Nd and ¹⁵⁰Nd, respectively.     

Determination of lead separated selectively with ion exchange method from solution onto BCW in Sirnak, East Anatolia of Turkey

There are approximately 82 million of tons asphaltites reserves in ?irnak, East Anatolia of Turkey. The present study was investigated to employ ashes of S?rnak BCW (burned coal waste) as an ion exchange in removal of important toxic metal, Lead (Pb), in high yields by adsorption. The ion exchange characteristics of lead onto BCW from aqueous solution were investigated with respect to the changes in pH of solution, adsorbent dosage, initial metal ion concentration, contact time and temperature of solution. For the adsorption of lead, the Langmuir isotherm model fitted to equilibrium data better than the Freundlich isotherm model. Thermodynamic functions, the change of free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°) of adsorption were also calculated for lead. These parameters showed that the adsorption was feasible, spontaneous and exothermic at 293–333 K. Experimental data were also evaluated in terms of kinetic characteristics of adsorption. The batch kinetic data were correlated to the pseudo-first order and pseudo-second order models. The data fitted better to the pseudo-second order equation. The activation energy of systems was determined. Experimental data have shown that BCW that was used in unmodified form; as low cost, readily available ion exchange; can be used for removal of lead from industrial waste waters. Analysis was determined using Flame Atomic Absorption Spectrometry (FAAS).     

Annular diffusion denuder for simultaneous removal of gaseous organic compounds and air oxidants during sampling of carbonaceous aerosols

A specially designed annular diffusion denuder for simultaneous removal of organic gaseous compounds and atmospheric oxidants in carbonaceous aerosol sampling is presented. Various kinds of denuder coatings were compared with respect to the collection efficiency of both organic gaseous compounds and NO₂ and ozone. The optimum sorbent is a mixture of activated charcoal and sulfite on molecular sieve. To ensure high collection efficiency over long-term field operation, two annular diffusion denuders are combined in series. The first half of the first denuder is filled with Na₂SO₃ on molecular sieve (23 cm long layer) while the second half of the first denuder and the whole second denuder are filled with activated charcoal (the total length of the charcoal section is 67 cm).     

A new method for stable lead isotope extraction from seawater

A new technique for stable lead (Pb) isotope extraction from seawater is established using Toyopearl AF-Chelate 650 M^® resin (Tosoh Bioscience LLC). This new method is advantageous because it is semi-automated and relatively fast; in addition it introduces a relatively low blank by minimizing the volume of chemicals used in the extraction. Subsequent analyses by HR ICP-MS have a good relative external precision (2σ) of 3.5‰ for ²⁰⁶Pb/²⁰⁷Pb, while analyses by MC-ICP-MS have a better relative external precision of 0.6‰. However, Pb sample concentrations limit MC-ICP-MS analyses to ²⁰⁶Pb, ²⁰⁷Pb, and ²⁰⁸Pb. The method was validated by processing the common Pb isotope reference material NIST SRM-981 and several GEOTRACES intercalibration samples, followed by analyses by HR ICP-MS, all of which showed good agreement with previously reported values.     

Sampling of water, soil and sediment to trace organic pollutants at a river-basin scale

Sampling is considered a crucial step in the analysis of organic compounds in the environment. This review describes field sampling techniques and provides detailed step-by-step procedures for collection and preservation of all major environmental matrices (water, sediment and soil) integrated as part of the river-basin water cycle. Attention is given to the prerequisites for obtaining reliable samples, and the practical issues of sample collection (planning, field sampling, sampling strategies and equipment and data quality assessment) are considered. Considering the heterogeneity of environmental matrices, special considerations for each matrix are given to solve typical problems and to find the most appropriate solutions to ensure the quality of the sample. The procedures described in the next sections are commonly used protocols that reflect true field conditions and current state-of-the-art techniques used in the sampling of organic compounds. The aim is to signify the importance of sampling to the overall analytical procedure. Finally, quality control issues to be considered in environmental sampling are given.     

Analysis of organic aerosols collected on filters by Aerosol Mass Spectrometry for source identification

Aerosol Mass Spectrometers (AMS) are powerful tools in the analysis of the chemical composition of airborne particles, particularly organic aerosols which are gaining increasing attention. However, the advantages of AMS in providing on-line data can be outweighed by the difficulties involved in its use in field measurements at multiple sites. In contrast to the on-line measurement by AMS, a method which involves sample collection on filters followed by subsequent analysis by AMS could significantly broaden the scope of AMS application. We report the application of such an approach to field studies at multiple sites. An AMS was deployed at 5 urban schools to determine the sources of the organic aerosols at the schools directly. PM₁ aerosols were also collected on filters at these and 20 other urban schools. The filters were extracted with water and the extract run through a nebulizer to generate the aerosols, which were analyzed by an AMS. The mass spectra from the samples collected on filters at the 5 schools were found to have excellent correlations with those obtained directly by AMS, with r² ranging from 0.89 to 0.98. Filter recoveries varied between the schools from 40 to 115%, possibly indicating that this method provides qualitative rather than quantitative information. The stability of the organic aerosols on Teflon filters was demonstrated by analysing samples stored for up to two years. Application of the procedure to the remaining 20 schools showed that secondary organic aerosols were the main source of aerosols at the majority of the schools. Overall, this procedure provides accurate representation of the mass spectra of ambient organic aerosols and could facilitate rapid data acquisition at multiple sites where AMS could not be deployed for logistical reasons.     

分析化学取样理论研究进展

从化学计量学角度就分析化学的取样理论研究进行了系统总结。主要包括：取样误差与研究总体的理化性质间的关系;现代数理统计的理论和方法在分析取样中的应用;分析取样的质量控制。为深入研究并完善分析取样理论做了评述及展望。     

An ultra-clean technique for accurately analysing Pb isotopes and heavy metals at high spatial resolution in ice cores with sub-pg g Pb concentrations

Measurements of Pb isotope ratios in ice containing sub-pg g⁻¹ concentrations are easily compromised by contamination, particularly where limited sample is available. Improved techniques are essential if Antarctic ice cores are to be analysed with sufficient spatial resolution to reveal seasonal variations due to climate. This was achieved here by using stainless steel chisels and saws and strict protocols in an ultra-clean cold room to decontaminate and section ice cores. Artificial ice cores, prepared from high purity water were used to develop and refine the procedures and quantify blanks. Ba and In, two other important elements present at pg g⁻¹ and fg g⁻¹ concentrations in Polar ice, were also measured. The final blank amounted to 0.2 ± 0.2 pg of Pb with ²⁰⁶Pb/²⁰⁷Pb and ²⁰⁸Pb/²⁰⁷Pb ratios of 1.16 ± 0.12 and 2.35 ± 0.16, respectively, 1.5 ± 0.4 pg of Ba and 0.6 ± 2.0 fg of In, most of which probably originates from abrasion of the steel saws by the ice. The procedure was demonstrated on a Holocene Antarctic ice core section and was shown to contribute blanks of only ∼5%, ∼14% and ∼0.8% to monthly resolved samples with respective Pb, Ba and In concentrations of 0.12 pg g⁻¹, 0.3 pg g⁻¹ and 2.3 fg g⁻¹. Uncertainties in the Pb isotopic ratio measurements were degraded by only ∼0.2%.     

Flow injection in-valve-mini-column pretreatment combined with ion chromatography for cadmium, lead and zinc determination

A flow injection (FI) in-valve-mini-column packed with Chelex-100 resin is proposed for on-line sample pretreatment for some metal ions, namely, Cd(II), Pb(II) and Zn(II), prior to simultaneous determination using ion chromatography (IC). A solution containing a mixture of the cations was first passed through the in-valve-mini-column, followed by on-line elution. The eluate was then flowed further to an injection valve and was injected into an ion chromatograph. Conditions of the system were optimized. A single standard calibration was possible. The recoveries of cations were found to be in the range of 95–105%. The developed method was applied to the accurate analysis of zinc ore samples.     

“Click chemistry” preparation of WCX packings for protein separation

Click chemistry was applied to immobilize three kinds of alkyne-carboxylic acids onto azide-modified silica gel to prepare three novel stationary phases for weak cation exchange chromatography(WCX).The developed protocol combines the benefits of operational simplicity,exceptionally mild conditions and high surface loadings.Six kinds of standard proteins were separated completely on the novel packings.Compared with commercial WCX columns,the three kinds of novel WCX packings prepared by click chemistry approach have better resolution and selectivity.Lysozyme was purified successfully from egg white with the novel WCX column by one step.The purity was more than 97%and a high specific activity was achieved to be 81,435 U/mg.The results illustrate the potential of click chemistry for preparation of stationary phase for IEC.     

Direct lead isotope analysis in Hg-rich sulfides by LA-MC-ICP-MS with a gas exchange device and matrix-matched calibration

In situ Pb isotope data of sulfide samples measured by LA-MC-ICP-MS provide valuable geochemical information for studies of the origin and evolution of ore deposits. However, the severe isobaric interference of ²⁰⁴Hg on ²⁰⁴Pb and the lack of matrix-matched sulfide reference materials limit the precision of Pb isotopic analyses for Hg-rich sulfides. In this study, we observe that Hg forms vapor and can be completely removed from sample aerosol particles produced by laser ablation using a gas exchange device. Additionally, this device does not influence the signal intensities of Pb isotopes. The within-run precision, the external reproducibility and the analytical accuracy are significantly improved for the Hg-rich sulfide samples using this mercury-vapor-removing device. Matrix effects are observed when using silicate glass reference materials as the external standards to assess the relationship of mass fractionation factors between Tl and Pb in sulfide samples, resulting in a maximum deviation of ∼0.20% for ^20xPb/²⁰⁴Pb. Matrix-matched reference materials are therefore required for the highly precise and accurate Pb isotope analyses of sulfide samples. We investigated two sulfide samples, MASS-1 (the Unites States Geological Survey reference materials) and Sph-HYLM (a natural sphalerite), as potential candidates. Repeated analyses of the two proposed sulfide reference materials by LA-MC-ICP-MS yield good external reproducibility of <0.04% (RSD, k = 2) for ^20xPb/²⁰⁶Pb and <0.06% (RSD, k = 2) for ^20xPb/²⁰⁴Pb with the exception of ^20xPb/²⁰⁴Pb in MASS-1, which provided an external reproducibility of 0.24% (RSD, k = 2). Because the concentration of Pb in MASS-1 (76 μg g⁻¹) is ∼5.2 times lower than that in Sph-HYLM (394 ± 264 μg g⁻¹). The in situ analytical results of MASS-1 and Sph-HYLM are consistent with the values obtained by solution MC-ICP-MS, demonstrating the reliability and robustness of our analytical protocol.     

Simultaneous recovery of EDTA and lead(II) from their chelated solutions using a cation exchange membrane

Factors affecting the efficiency of electrochemical recovery of EDTA and Pb(II) from their chelated solutions were systematically examined using a cation exchange membrane Neosepta CM-1. The catholyte contained an equimolar amount of Pb(II) and EDTA, and the anolyte contained 0.1 M NaNO₃. The iridium oxide coated on titanium (IrO₂/Ti) and stainless steel were used as anode and cathode, respectively. Experiments were carried out at different current densities (46.3–185 A/m²), initial catholyte pH values (1.47–6.02) and Pb(II) concentrations (0.005–0.03 M). An economically feasible current efficiency and recovery percentages of Pb(II) and EDTA could be achieved if the concentration of the chelated Pb(II) was sufficiently high.     

适用于改换介质的简易电解池设计及其电位溶出分析的应用研究

设计制作了用于改换介质的简易电解池,并以旋转圆盘玻碳电极为工作电极,研究了其用于电位溶出分析改换溶出介质的可行性。以同时测定Ｐｂ＾２＋、Ｃｄ＾２＋为例,试验了改换溶出介质的条件。结果表明,改换介质可消除共存离子的干扰,只要选择合适的溶出介质,可有效地提高测定方法的分辨率和灵敏度。此方法用于矿样中铅和镉的同时测定,结果满意。     

成渝高速公路某段路旁土壤铅含量分布的研究

高速公路旁土壤铅污染主要来源之一为汽车尾气排放[1]。近年来,已经有不少文章报道了公路旁土壤铅含量分布规律[2-4],但大部分研究仅限于定性描述。为了定量研究公路旁土壤铅含量分布规律,已有报道在高斯烟源扩散模式基础上建立了路旁土壤中铅含量分布高斯方程[4-5],然而这几种     

Preparation of weak cation exchange packings for chromatographic separation of proteins using "click chemistry'

"Click chemistry" is defined as a class of robust and selective chemical reactions affording high yields and is tolerant to a variety of solvents (including water), functional groups, and air. In this study, click chemistry was used as an effective strategy for coupling three alkyne-carboxylic acids onto the azide-silica to obtain three novel stationary phases of weak cation exchange chromatography, which were characterized with FTIR and elemental analysis. Six kinds of standard proteins, such as myoglobin, RNase A, RNase B, cytochrome C, α-chymotrypsin A, and lysozyme, were separated completely with the three novel weak cation exchange chromatography stationary phases. Compared with commercial weak cation exchange chromatography columns, the three kinds of novel weak cation exchange chromatography packings prepared by click chemistry approach have better resolution and selectivity. The mass recovery of more than 97% was obtained for all the tested proteins, and the bioactivity recovery of lysozyme on the prepared column was determined to be 96%. In addition, lysozyme was purified successfully from egg white with the novel weak cation exchange chromatography column by one step. The purity was more than 97% and a high specific activity was achieved to be 81 435 U/mg. The results illustrate the potential of click chemistry for preparing stationary phase for ion-exchange chromatography.     

Preparation of a weak anion exchange/hydrophobic interaction dual‐function mixed‐mode chromatography stationary phase for protein separation using click chemistry

In this study, 3‐diethylamino‐1‐propyne was covalently bonded to the azide‐silica by a click reaction to obtain a novel dual‐function mixed‐mode chromatography stationary phase for protein separation with a ligand containing tertiary amine and two ethyl groups capable of electrostatic and hydrophobic interaction functionalities, which can display hydrophobic interaction chromatography character in a high‐salt‐concentration mobile phase and weak anion exchange character in a low‐salt‐concentration mobile phase employed for protein separation. As a result, it can be employed to separate proteins with weak anion exchange and hydrophobic interaction modes, respectively. The resolution and selectivity of the stationary phase were evaluated in both hydrophobic interaction and ion exchange modes with standard proteins, respectively, which can be comparable to that of conventional weak anion exchange and hydrophobic interaction chromatography columns. Therefore, the synthesized weak anion exchange/hydrophobic interaction dual‐function mixed‐mode chromatography column can be used to replace two corresponding conventional weak anion exchange and hydrophobic interaction chromatography columns to separate proteins. Based on this mixed‐mode chromatography stationary phase, a new off‐line two‐dimensional liquid chromatography technology using only a single dual‐function mixed‐mode chromatography column was developed. Nine kinds of tested proteins can be separated completely using the developed method within 2.0 h.     

Kinetics of Adsorption of Thymopentin on a Gel-Type Strong Cation-Exchange Resin

The ion-exchange kinetics have been determined for adsorption of thymopentin on a gel-type sulfonated styrene–divinylbenzene resin converted to the ammonium form. Batch equilibrium and kinetic experiments were performed in chloride ion solutions of different concentration. Equilibrium data revealed isotherms were a good fit to the constant separation factor isotherm. Because of the high capacity and low cost of the resin its use for uptake of thymopentin was economically feasible. Kinetic data were compared with the predictions from the Nernst–Planck and Fick models. The intraparticle and effective diffusivity of thymopentin were obtained from these models.     

Optimization of a novel method for the organic chemical characterization of atmospheric aerosols based on microwave-assisted extraction combined with stir bar sorptive extraction

A practical analytical methodology based on coupling microwave-assisted extraction-stir bar sorptive extraction-thermal desorption-gas chromatography-mass spectrometry (MAE-SBSE-TD-GC-MS) was developed and validated for the characterization of several SVOC in atmospheric particulate matter (PM).The high enrichment capacity of SBSE makes it a powerful tool for improving detection limits and MAE has been useful for overcoming the long extraction times and high volumes of extraction solvent used in traditional methodologies. Relative to Soxhlet extraction followed by GC-MS analysis (EPA Methods 3540 and 8270C), the MAE-SBSE-TD-GC-MS methodology resulted with approximately 10⁴ times better detection limits. Detection limits ranged from 0.3 to 8.3 pg m⁻³ for pp′-DDD and decachlorobyphenyl, respectively in PM2.5, 24 m³ air sample. The performance of the optimized methodology gave good precisions, with R.S.D. less than 30% for most of the standards, and linearity within the range tested of 0.1-15 μg L⁻¹. Analysis of real PM samples resulted in the identification of compounds in the ng L⁻¹ range.     

A signal-on electrogenerated chemiluminescent biosensor for lead ion based on DNAzyme

A highly reproducible and sensitive signal-on electrogenerated chemiluminescence (ECL) biosensor based on the DNAzyme for the determination of lead ion was developed. The ECL biosensor was fabricated by covalently coupling 5′-amino-DNAzyme-tagged with ruthenium bis (2,2′-bipyridine) (2,2′-bipyridine-4,4′-dicarboxylic acid)-ethylenediamine (Ru1-17E′) onto the surface of graphite electrode modified with 4-aminobenzoic acid, and then a DNA substrate with a ribonucleotide adenosine hybridized with Ru1-17E′ on the electrode. Upon binding of Pb²⁺ to the Ru1-17E′ to form a complex which catalyzed the cleavage of the DNA substrate, the double-stranded DNA was dissociated and thus led to a high ECL signal. The signal linearly increases with the concentration of Pb²⁺ in the range from 5.0 to 80 pM with a detection limit of 1.4 pM and a relative standard derivation of 2.3%. This work demonstrates that using DNAzyme tagged with ruthenium complex as an ECL probe and covalently coupling method for the fabrication of the ECL biosensor with high sensitivity, good stability and significant regeneration ability is promising approach.