Enhanced photoluminescence of Ca<Subscript>2</Subscript>Al<Subscript>2</Subscript>SiO<Subscript>7</Subscript>:Eu<Superscript>3+</Superscript> by charge compensation method

The effect of compensator on optical properties of Ca₂Al₂SiO₇:Eu³⁺ is systematically investigated by the X-ray powder diffraction, photo-luminescence (PL) properties and lifetime. It is obviously observed that the PL intensity of Eu³⁺ under 394 nm excitation increases in the order of Ca_1.86Eu_0.14Al₂SiO₇ (CAS), Ca_1.72Na_0.14Eu_0.14Al₂SiO₇ (CASNa) and Ca_1.86Eu_0.14Al_2.14Si_0.86O₇ (CASAl), the intensity of Eu³⁺ are 100%, 134%, 184%, and the lifetime of Eu³⁺ are 0.75 ms, 1.28 ms and 1.39 ms, respectively. A charge compensation model is proposed to explain the changes in the emission intensity and lifetime of Eu³⁺ in Ca₂Al₂SiO₇ with different compensation methods. PACS 78.55.-m; 61.72.Ji; 61.43.Gt; 42.70.-a; 74.62.Dh     

Photoluminescence,thermoluminescence and electron spin resonance studies on Eu<Superscript>3+</Superscript> doped Ca<Subscript>3</Subscript>Al<Subscript>2</Subscript>O<Subscript>6</Subscript> red phosphors

Tricalcium aluminate doped with Eu³⁺ was prepared at furnace temperatures as low as 500°C by using the convenient combustion route and examined using powder X-ray diffraction, scanning electron microscope and photoluminescence techniques. A room-temperature photoluminescence study showed that the phosphors can be efficiently excited by UV/Visible region, emitting a red light with a peak wavelength of 616 nm corresponding to the ⁵D₀–⁷F₂ transition of Eu³⁺ ions. The phosphor exhibits three thermoluminescence (TL) peaks at 195°C, 325°C and 390°C. Electron Spin Resonance (ESR) studies were carried out to study the defect centres induced in the phosphor by gamma irradiation and also to identify the defect centres responsible for the TL process. Room-temperature ESR spectrum of irradiated phosphor appears to be a superposition of three distinct centres. One of the centres (centre I) with principal g-value 2.0130 is identified as O⁻ ion while centre II with an axially symmetric principal values g _∥=2.0030 and g _⊥=2.0072 is assigned to an F⁺ centre (singly ionized oxygen vacancy). O⁻ ion (hole centre) correlates with the TL peak at 195°C and the F⁺ centre (electron centre), which acts as a recombination centre, is also correlated to the 195°C TL peak. F⁺ centre further appears to be related to the high temperature peak at 390°C. Centre III is also assigned to an F⁺ centre and seems to be the recombination centre for the TL peak at 325°C.     

Synthesis and luminescent properties of Eu<Superscript>3+</Superscript>- and Eu<Superscript>2+</Superscript>-activated sodium pyrophosphate Na<Subscript>4</Subscript>P<Subscript>2</Subscript>O<Subscript>7</Subscript>

The luminescent properties of Eu³⁺ and Eu²⁺ ions in sodium pyrophosphate, Na₄P₂O₇, have been studied. The excitation spectrum of the Eu³⁺ emission in Na₄P₂O₇ consists of several sets of bands in the range 280–535 nm due to 4f–4f transitions of Eu³⁺ ions and a broad band with a maximum at about 240 nm interpreted to be due to a charge transfer (CT) transition from oxygen 2p states to empty states of the Eu³⁺ 4f⁶-configuration. Although the CT band energy is large enough, the quantum efficiency (η) of the Eu³⁺ emission in Na₄P₂O₇ under CT excitation was estimated to be very low (η ≤ 0.01). In terms of a configurational coordinate model, this fact is interpreted as a result of the high efficiency of a radiationless relaxation from the CT state to the ⁷F₀ ground state of Eu³⁺ ions occupying sodium sites in Na₄P₂O₇. A strong reducing agent is required in order to stabilize Eu²⁺ ions in Na₄P₂O₇ during the synthesis. Several nonequivalent Eu²⁺ luminescence centers in Na₄P₂O₇ were found.     

Quantum cutting in Gd<Subscript>2</Subscript>SiO<Subscript>5</Subscript>: Eu<Superscript>3+</Superscript> by VUV excitation

The emission and excitation spectra of Gd₂SiO₅∶Eu³⁺ were investigated using the VUV beam line of the Beijing Synchrotron Radiation Facility (BSRF). The experimental results were discussed in the frame of visible quantum cutting process involved in Gd³⁺−Eu³⁺ system. Upon direct excitation into the⁶G _J states of Gd³⁺, two visible photon emissions from Eu³⁺ were observed. Cursory evaluation proved that Gd₂SiO₅∶Eu³⁺ is an efficient visible quantum cutter.     

Improved photoluminescence of pulsed-laser-ablated Y<Subscript>1-x</Subscript>Gd<Subscript>x</Subscript>VO<Subscript>4</Subscript>:Eu<Superscript>3+</Superscript> thin film phosphors by Gd substitution

Gd-substituted Y_1-xGd_xVO₄:Eu³⁺ luminescent thin films have been grown on Al₂O₃(0001) substrates using pulsed-laser deposition. The films grown under different deposition conditions have been characterized using microstructural and luminescent measurements. The crystallinity, surface morphology, and photoluminescence (PL) of the films are highly dependent on the amount of Gd. The photoluminescence (PL) brightness data obtained from Y_1-xGd_xVO₄:Eu³⁺ films grown under optimized conditions have indicated that the PL brightness is more dependent on the surface roughness than the crystallinity of the films. In particular, the incorporation of Gd into the YVO₄ lattice could induce a remarkable increase of PL. The highest emission intensity was observed with Y_0.57Gd_0.40Eu_0.03VO₄ thin film whose brightness was increased by a factor of 2.5 and 1.9 in comparison with that of YVO₄:Eu³⁺ and GdVO₄:Eu³⁺ films, respectively. This phosphor have application to flat panel displays. PACS 78.20.-e; 78.55.-m; 78.66.-w     

Luminescence in Dy<Superscript>3+</Superscript> and Eu<Superscript>3+</Superscript> Activated K<Subscript>3</Subscript>Al<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

The Dy³⁺ and Eu³⁺ activated K₃Al₂ (PO₄)₃ phosphors were prepared by a combustion synthesis. From a powder X-ray diffraction (XRD) analysis the formation of K₃Al₂ (PO₄)₃ was confirmed. In the photoluminescence emission spectra, the K₃Al₂(PO₄)₃:Dy³⁺ phosphor emits two distinctive colors: blue and yellow whereas K₃Al₂(PO₄)₃:Eu³⁺ emits red color. Thus the combination of colors gives BYR (blue–yellow–red) emissions can produce white light. These phosphors exhibit a strong absorption between 340 and 400 nm which suggest that present phosphor is a promising candidate for producing white light-emitting diodes (LED).     

Luminescence thermometry using Gd<Subscript>2</Subscript>Zr<Subscript>2</Subscript>O<Subscript>7</Subscript>:Eu<Superscript>3+</Superscript>

In this paper we study the possibility of using the synthesized nanopowder samples of Gd₂Zr₂O₇:Eu³⁺ for temperature measurements by analyzing the temperature effects on its photoluminescence. The nanopowder was prepared by solution combustion synthesis method. The photoluminescence spectra used for analysis of Gd₂Zr₂O₇:Eu³⁺ nano phosphor optical emission temperature dependence were acquired using continuous laser diode excitation at 405 nm. The temperature dependencies of line emission intensities of transitions from ⁵D₀ and ⁵D₁ energy levels to the ground state were analyzed. Based on this analysis we use the two lines intensity ratio method for temperature sensing. Our results show that the synthesized material can be efficiently used as thermographic phosphor up to 650 K.     

Formation of Eu<Superscript>2+</Superscript> and Eu<Superscript>3+</Superscript> centers in synthesis of CaF<Subscript>2</Subscript>:Eu luminophores

We have studied the effect of CaF₂:Eu luminophore synthesis methods on the charge state of europium. We have shown that Eu³⁺ predominates over Eu²⁺ in samples obtained by coprecipitation of europium with calcium fluoride, and the ratio Eu³⁺/Eu²⁺ grows as the total amount of europium increases. Partial charge conversion of the europium occurs during calcination of the samples, due to changes in the excess fluorine balance. We studied the luminescence, magnetic susceptibility, and EPR of the synthesized samples. We have shown that in a solid solution, europium forms large ordered clusters, determining both the luminescent and the magnetic properties of the material. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 6, pp. 773–779, November–December, 2007.     

Intense White Luminescence from Combustion Synthesized Ca<Subscript>12</Subscript>Al<Subscript>14</Subscript>O<Subscript>33</Subscript>: Yb<Superscript>3+</Superscript>/Yb<Superscript>2+</Superscript> Single Phase Phosphor

The Ca₁₂Al₁₄O₃₃: Yb³⁺/Yb²⁺ single phase nano-phosphor has been synthesized through combustion route and its luminescence and lifetime studies have been carried out up to 20 K using 976 and 266 nm excitations. The samples heated in open atmosphere have shown the presence of Yb in Yb³⁺ and Yb²⁺ states. The 976 nm excitation results a cooperative upconversion emission at 486 nm due to the Yb³⁺ state and a broad band in the blue region and has been assigned to arise from the defect centers. The 266 nm excitation on the other hand results a broad emission band even from as-synthesized phosphor without doping of Yb, the width of which increases in presence of Yb due to the emission from Yb²⁺ ions formed in heated samples. The white emission covers almost whole visible region with bandwidth 190 nm. The ions in Yb²⁺ state has been found to increase with the increase in heating temperature up to 1,273 K. A back conversion of Yb²⁺ to Yb³⁺ has been observed for higher temperatures. Effect of boric and phosphoric acids as flux on the emission properties of Yb³⁺ and Yb²⁺ states have been examined and discussed. Quantum yield of emission has also been determined for different samples.     

PL Properties of Sr<Subscript>2</Subscript>CeO<Subscript>4</Subscript> With Eu<Superscript>3+</Superscript> and Dy<Superscript>3+</Superscript> for Solid State Lighting Prepared by Precipitation Method

Photoluminescence studies of pure and Dy³⁺, Eu³⁺ doped Sr₂CeO₄ compounds are presented by oxalate precipitation method for solid state lighting. The prepared samples also characterized by XRD, SEM (EDS) and FTIR spectroscopy. The pure Sr₂CeO₄ compound displays a broad band in its emission spectrum when excited with 280 nm wavelength, which peaks centered at 488 nm, which is due to the energy transfer between the molecular orbital of the ligand and charge transfer state of the Ce⁴⁺ ions. Emission spectra of Sr₂CeO₄ with different concentration of Dy³⁺ ions under near UV radiation excitation, shows that intensity of luminescence spectra is found to be affected by Dy³⁺ ions, and it increases with adding some percentages of Dy³⁺ ions. The maximum doping concentration for quenching is found to be Dy³⁺?=?0.2 mol % to Sr²⁺ions. The observed broad spectrum from 400 to 560 nm is mainly due to CT transitions in Sr₂CeO₄ matrix and some fractional contribution of transitions between ⁴F_9/2 → ⁶H_15/2 of Dy³⁺ ions. Secondly the effect of Eu³⁺ doping at the Sr²⁺ site in Sr₂CeO₄, have been studied. The results obtained by doping Eu³⁺ concentrations (0.2 mol% to 1.5 mol%), the observed excitation and emission spectra reveal excellent energy transfer between Ce⁴⁺ and Eu³⁺. The phenomena of concentration quenching are explained on the basis of electron phonon coupling and multipolar interaction. This energy transfer generates white light with a color tuning from blue to red, the tuning being dependent on the Eu³⁺ concentration. The results establish that the compound Sr₂CeO₄ with Eu³⁺?=?1 mol% is an efficient “single host lattice” for the generation of white lights under near UV-LED and blue LED irradiation. The commission internationale de I’Eclairage (CIE) coordinates were calculated by Spectrophotometric method using the spectral energy distribution of prepared phosphors.     

Morphology-dependent luminescence behavior of Y<Subscript>2-x</Subscript>Gd<Subscript>x</Subscript>O<Subscript>3</Subscript>:Eu<Superscript>3+</Superscript> thin-film phosphors grown by a laser ablation

Y_2-xGd_xO₃:Eu³⁺ luminescent thin films have been grown on Al₂O₃(0001) substrates using pulsed laser deposition. Films grown under different deposition conditions have been characterized using microstructural and luminescence measurements. The crystallinity, surface morphology and photoluminescence (PL) of the films are highly dependent on the amount of Gd present. The photoluminescence (PL) brightness data obtained from Y_2-xGd_xO₃:Eu³⁺ films grown under optimized conditions have indicated that Al₂O₃(0001) is one of the most promising substrates for the growth of high-quality Y_2-xGd_xO₃:Eu³⁺ thin-film red phosphors. In particular, the incorporation of Gd into the Y₂O₃ lattice could induce a remarkable increase of PL. The highest emission intensity was observed with Y_1.35Gd_0.60Eu_0.05O₃, whose brightness was increased by a factor of 3.1 in comparison with that of Y₂O₃:Eu³⁺ films. This phosphor may be promising for application in flat-panel displays. PACS 78.20.-e; 78.55.-m; 78.66.-w     

A novel white light-emitting diode (w-LED) fabricated with Sr<Subscript>6</Subscript>BP<Subscript>5</Subscript>O<Subscript>20</Subscript>:Eu<Superscript>2+</Superscript> phosphor

Sr₆BP₅O₂₀:Eu²⁺ phosphor was prepared by the solid-state reaction method under a weak reductive atmosphere and the photoluminescence properties were studied systematically. The bluish-green emission band of Sr₆BP₅O₂₀:Eu²⁺ phosphor is peaking at 475 nm, and the excitation bands are broad with peaks at about 290 and 365 nm with a shoulder around 390 nm, respectively. By combining with Ga(In)N-based near-ultraviolet LEDs, a bluish-green LED was fabricated based on the Sr₆BP₅O₂₀:Eu²⁺ phosphor, and a novel intense white LED was fabricated based on the bluish-green phosphor Sr₆BP₅O₂₀:Eu²⁺ and the red phosphor (Sr,Ca)₅(PO₄)₃Cl:Eu²⁺,Mn²⁺. When this two-phosphor white LED is operated under 20-mA forward-bias current at room temperature, the Commission Internationale de l’Eclairage(CIE) chromaticity coordinates (x,y), the correlated color temperature Tc, and the color rendering index Ra are calculated to be (0.3281,0.3071), 5687 K, and 87.3, respectively. The dependence of the bluish-green and two-phosphor white LEDs on different forward-bias currents from 5 mA to 50 mA shows a similar behavior. As the current increases, the relative intensity simultaneously increases. The CIE chromaticity coordinates (x,y) of the two-phosphor white LED tend to decrease. Consequently, the correlated color temperature Tc increases from 3800 K to 9400 K and the color rendering index Ra of the two-phosphor white LED increases from 83.4 to 91.8 simultaneously. PACS 07.60.-j; 42.70.-a; 71.55.Eq     

luminescence of BaGa<Subscript>2</Subscript>Se<Subscript>4</Subscript> crystals activated by Eu<Superscript>2+</Superscript> and Ce<Superscript>3+</Superscript> ions

We have studied the effect of doping with Eu²⁺ and Ce³⁺ ions on the photoluminescence (PL) of BaGa₂Se₄ crystals in the temperature range 77–300 K. We have established that the broad bands with maxima at wavelengths 456 nm and 506 nm observed in the photoluminescence spectra of BaGa₂Se₄:Ce³⁺ crystals are due to intracenter transitions 5d → ²F_7/2 and 5d →²F_5/2 of the Ce³⁺ ions, while the broad photoluminescence band with maximum at 521 nm in the spectrum of BaGa₂Se₄:Eu²⁺ is associated with 4f⁶ 5d → 4f⁷ (⁸S_7/2) transitions of the Eu²⁺ ion. We show that in BaGa₂Se₄:Eu²⁺,Ce³⁺ crystals, excitation energy is transferred from the Ce³⁺ ions to the Eu²⁺ ions.     

Tunable emission and efficient energy-transfer properties of Ce<Superscript>3+</Superscript> and Mn<Superscript>2+</Superscript> co-doped Ba<Subscript>3</Subscript>Gd(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> phosphors

MgO powders subjected to Q-switched laser pulses in water were characterized by X-ray/electron diffraction and optical spectroscopy to have a significant optical property change with accompanied transformation into the phase assemblages of periclase, brucite and liquid-crystalline lamella. The periclase nanoparticles tended to have {111} habit planes parallel to the basal layers of lamella and brucite flakes more or less rolled as fibers, ribbons or tubes. A significant internal compressive stress was built up for periclase and brucite but not the more flexible lamellar phase. The colloidal suspension containing the densified periclase nanoparticles within the rolled brucite/lamellae flakes showed UV–visible absorption corresponding to a minimum band gap of ca. 5 eV.     

Luminescent properties of SrMg<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>:Eu<Superscript>2+</Superscript>, and Mn<Superscript>2+</Superscript> as a potential phosphor for ultraviolet light-emitting diodes

Eu²⁺ and Mn²⁺ co-doped SrMg₂(PO₄)₂ phosphors with blue and red two emission bands were prepared by the high temperature solid state method and their luminescent properties have been investigated as a function of activator and co-activator concentrations. Resonance-type energy transfers from Eu²⁺ to Mn²⁺ were discovered by directly overlapping the Eu²⁺ emission spectrum and the excitation spectrum of Mn²⁺. Efficiencies of energy transfer were also calculated according to the changes of relative intensities of Eu²⁺ and Mn²⁺ emission. According to the principle of energy transfer, we demonstrated that the phosphor SrMg₂(PO₄)₂:Eu²⁺,Mn²⁺ with double emission bands exhibited a great potential as a phosphor for ultraviolet light-emitting diodes and the relative intensities of blue and red emission could be tuned by adjusting the contents of Eu²⁺ and Mn²⁺. PACS 78.55.-m     

Analysis of the charge transfer mechanisms responsible for the current-voltage characteristics of Ca<Subscript>4</Subscript>Ga<Subscript>2</Subscript>S<Subscript>7</Subscript>: Eu<Superscript>3+</Superscript> single crystals

The current-voltage characteristics of Ca₄Ga₂S₇: Eu³⁺ single crystals are measured for the first time, and the processes affecting these characteristics are analyzed theoretically. It is demonstrated that Ca₄Ga₂S₇: Eu³⁺ single crystals are high-resistance semiconductors with a resistivity of ～10⁹ Ω cm and a relative permittivity of 10.55. The electrical properties of the studied materials are governed by traps with activation energies of 0.13 and 0.19 eV and a density ranging from 9.5×10¹⁴ to 2.7×10¹⁵ cm^?3. The one-carrier injection is observed in weak electric fields. In electric fields with a strength of more than 4×10³ V/cm, traps undergo thermal field ionization according to the Pool-Frenkel mechanism. At low temperatures and strong fields (160 K and 5×10⁴ V/cm), the electric current is most likely due to hopping conduction by charge carriers over local levels in the band gap in the vicinity of the Fermi level.     

Sol-gel method and luminescence properties of the ZrO<Subscript>2</Subscript>:Eu<Superscript>3+</Superscript> phosphors with different charge compensation

Eu³⁺-doped ZrO₂ phosphors with different charge compensators (Li⁺, Na⁺, K⁺) were prepared by the sol-gel method. The properties of the as-obtained samples are characterized by X-ray diffraction, scanning electron microscope, photoluminescence spectra, and decay curve. The results show that ZrO₂:Eu³⁺ phosphors with different charge compensation are mixed phase of tetragonal and monoclinic phase, and the volume fraction of tetragonal phase of ZrO₂:Eu³⁺/Na⁺ phosphor is bigger than the other phosphors. The phosphors can emit strong red light at 606~616 nm (⁵D₀ → ⁷F₂) excited by ultraviolet light (395 nm). Compared with two charge compensation patterns in the ZrO₂:Eu³⁺, it has been found that ZrO₂:Eu³⁺ phosphors used Na⁺ as charge compensator show greatly enhanced red emission under 395 nm excitation and longer luminescence lifetime.     

Structure,transport and magnetic properties of the double perovskite (Ca<Subscript>2-2x</Subscript>Sr<Subscript>2x</Subscript>)FeMoO<Subscript>6</Subscript>

In this paper we report the results of a detailed investigation of the double perovskite (Ca_2-2xSr_2x)FeMoO₆ system. Chemical size effects on structural, electrical, and magnetic properties caused by the substitution of isovalent, larger Sr ions into the smaller Ca sites, resulting in (Ca_2-2xSr_2x)FeMoO₆, have been examined. The compounds crystallize in the monoclinic space group P2₁/n for 0.0x<0.2, the orthorhombic space group Pbnm for 0.2x<0.4, and the tetragonal space group I4/m and I4/mmm for x0.4. Examination of the resistivity of all compounds reveals a metallic behavior which is well described by a Tⁿ dependence except for x=1.0. These n values change from 1 to 2 as T decreases lower than T_c. This is indicative of a variation in the transport mechanism at T_c. The ferrimagnetic transition temperature T_c increases with increasing x from 318 (x=0.0) to 393 K (x=1.0). For all samples, the saturation magnetization at 82 K obeys M_s3.5_B/(formula unit), compared to a theoretical spin-only moment of 4_B/(formula unit) for a perfectly ordered compound. PACS 74.25.Fy; 74.25.Ha     

Local structure of Gd<Superscript>3+</Superscript> and Eu<Superscript>2+</Superscript> impurity centers in a CdF<Subscript>2</Subscript> crystal

The local crystal structure of Gd³⁺ and Eu²⁺ cubic impurity centers in cadmium fluoride is calculated within the shell model in the pair potential approximation. The local compressibility of the cationic and anionic sublattices of the host lattice is determined in the vicinity of the Gd³⁺ (Eu²⁺) impurity ion.