在甲烷部分氧化制合成气中Pt-Ni/Al_2O_3催化剂中的Pt-Ni协同作用机理(英文)

甲烷部分氧化制合成气的研究是在Ｎｉ／Ａｌ２Ｏ３催化剂上进行的。结果表明,添加少量的Ｐｔ可显著提高甲烷转化率和ＣＯ选择性并增加Ｎｉ／Ａｌ２Ｏ３催化剂的稳定性。通过ＸＲＤ、ＸＰＳ、ＴＰＲ和ＴＰＤ等表征手段发现,Ｐｔ－Ｎｉ／Ａｌ２Ｏ３催化剂中形成了Ｐｔ－Ｎｉ合金,Ｐｔ在催化剂表面富集。分析ＴＰＲ和ＴＰＤ数据可知,Ｐｔ－Ｎｉ双金属的相互作用阻止了催化剂的烧结和Ｎｉ的流失,提高了催化剂的活性。另外,Ｐｔ－Ｎｉ的协同作用也抑制了催化剂表面积炭的产生。     

甲烷部分氧化制合成气反应Pt/Al_2O_3和Pt/CeO2/Al_2O_3催化剂的研究(英文)

研究了Ｐｔ／Ａｌ２Ｏ３和Ｐｔ／ＣｅＯ２／Ａｌ２Ｏ３催化剂对甲烷部分氧化制合成气反应的催化活性，发现Ｐｔ／ＣｅＯ２／Ａｌ２Ｏ３显示了比Ｐｔ／Ａｌ２Ｏ３更高的甲烷转化率和合成气选择性。用Ｈ２ＴＰＲ，Ｈ２ＴＰＤ，ＳＥＭ和ＸＲＤ等手段和技术对催化剂进行了表征。ＣｅＯ２与Ｐｔ之间存在较强的相互作用（ＳＭＳＩ），这种作用促进了Ｐｔ在催化剂表面的分散，抑制了Ｐｔ在催化剂表面的迁移，大大降低了催化剂在反应中的完全燃烧活性，提高了催化剂的部分氧化活性和选择性，避免了因催化剂床层局部温度过高而导致催化剂活性下降或失活，提高了催化剂的稳定性。同时，在反应过程中，ＣｅＯ２通过促进水蒸气变换反应（ＷＧＳＲ）的进行使反应体系迅速达到平衡，提高了催化剂对Ｈ２的选择性。     

Methane reforming With CO2 to syngas over CeO2-promoted Ni/Al2O3-ZrO2 catalysts Prepared Via a direct sol-gel process

CeO2-promoted Ni/Al2O3-ZrO2 (Ni/Al2O3-ZrO2-CeO2) catalysts were prepared by a direct sol-gel process with citric acid as gelling agent. The catalysts used for the methane reforming with CO2 was studied by infrared spectroscopy (IR), thermal gravimetric analysis (TGA), microscopic analysis, X-ray diffraction (XRD) and temperature-programmed reduction (TPR). The catalytic performance for CO2 reforming of methane to synthesis gas was investigated in a continuous-flow micro-reactor under atmospheric pressure. TGA, IR, XRD and microscopic analysis show that the catalysts prepared by the direct sol-gel process consist of Ni particles with a nanostructure of around 5 nm and an amorphous-phase composite oxide support. There exists a chemical interaction between metallic Ni particles and supports, which makes metallic Ni well dispersed, highly active and stable. The addition of CeO2 effectively improves the dispersion and the stability of Ni particles of the prepared catalysts, and enhances the adsorption of CO2 on the surface of catalysts. The catalytic tests for methane reforming with CO2 to synthesis gas show that the Ni/Al2O3-ZrO2-CeO2 catalysts show excellent activity and stability compared with the Ni/Al2O3 catalyst. The excellent catalytic activity and stability of the Ni/Al2O3-ZrO2-CeO2 are attributed to the highly, uniformly and stably dispersed small metallic Ni particles, the high reducibility of the Ni oxides and the interaction between metallic Ni particles and the composite oxide supports.     

高比表面积铝土矿载体的制备及在CO氧化反应中的应用

采用水热法,对天然铝土矿进行改性,获得高比表面积的铝土矿载体(Bauxite)。用等体积浸渍法制备了不同Pt含量的Pt/bauxite和1.0%Pt/Al2O3催化剂,以CO氧化为探针反应,考察了催化剂性能。采用XRF、XRD、低温N2-物理吸附、H2-TPR以及CO-TPD等对载体和催化剂样品进行表征。结果表明:Pt/bauxite催化剂具有优异的CO氧化性能,特别是当反应温度为200℃时,催化剂1.0%Pt/bauxite的CO转化率为93.4%,而1.0%Pt/Al2O3CO转化率仅为9.4%。其原因是铝土矿含有的Fe2O3是CO氧化反应的催化剂,且Fe2O3与负载的Pt之间发生了相互作用,降低了Pt和Fe2O3还原温度,提高了对CO的吸附能力且降低了CO的脱附温度,进而提高了催化剂的CO氧化反应性能。     

K改性的Pt/Al2O3催化剂上CO氧化反应：反应动力学和红外光谱研究

CO氧化不仅具有重要的实用价值,而且在基础研究中被用于考察反应机理及催化剂结构敏感性等一些重要问题,因此,该反应在催化领域中具有重要意义. Pt基催化剂被广泛应用于CO氧化反应.其催化活性取决于催化剂的制备方法.其中,碱金属如Na、K等助剂的添加可有效促进催化活性,红外光谱证据表明,其促进作用在于碱金属的添加可降低CO与表面Pt原子的相互作用.尽管如此,催化剂上反应动力学证据却十分缺乏.反应动力学的研究可以提供一些本证反应信息如反应基元步骤、反应速率表达式以及反应机理等.通过对比不同催化剂之间的反应动力学行为,可以进一步解释碱金属对催化剂结构以及反应行为的影响.因此在本工作中,我们制备了一系列以K为助剂的Pt/Al2O3催化剂,并进行了CO氧化的反应动力学研究,考察了助剂对CO反应级数和反应活化能的影响.结合原位红外光谱表征,进一步揭示了助剂在反应中的作用.通过对比不同Pt和K含量的催化剂上CO氧化反应活性,我们发现, K的添加能促进反应活性,且随着催化剂中K含量的增加,促进程度越明显.例如,0.42K-2Pt/Al2O3上T50温度比对应的2Pt/Al2O3降低了30oC.不同催化剂上CO氧化的反应动力学实验表明,反应速率随着CO的分压的增加而降低;但随着O2分压的增加而增大.幂函数反应速率表达式推导得到的反应级数发现,对于含K的催化剂其CO的反应级数(约为–0.2)明显比不含K的催化剂(约为–0.5)中高,说明K的添加减弱了CO与表面Pt原子之间的吸附能力.但对O2的反应级数影响较小.例如：在0.42K-2.0Pt/Al2O3上反应速率表达式为r =6.55′10–7pco–0.22po20.63;而在2.0Pt/Al2O3上为r =2.56′10–7pco–0.53po20.70.表观反应活化能的计算表明,含K的催化剂上表观反应活化能较低,进一步说明K的添加有利于反应进行.根据反应速率表达式,我们进行了基元步骤的推导,并计算了反应动力学参数.结果发现,与不含K的催化剂相比,含K的催化剂中本征反应速率常数明显增加,而CO吸附平衡常数降低了一半,表明K的存在使CO在Pt表面上的覆盖度降低.我们还通过原位红外光谱对比了催化剂上CO吸附行为的差异.数据表明,与不含K的催化剂相比, K的添加一方面降低了CO在催化剂表面的吸附量(峰面积变小);另一方面显著降低了CO在Pt表面上的脱附温度,说明两者之间的相互作用力减弱.综上所述,通过反应动力学和红外光谱实验,我们认为K助剂与表面Pt原子相互作用后生成了较为稳定的Pt–O–K物种.尽管该物种的具体结构目前还不明确,但我们的实验证据表明,该物种的存在可以有效减弱CO与表面Pt原子之间的相互作用,降低CO的表面覆盖度并有利于O2在Pt表面的竞争吸附,从而降低了表面吸附的CO与O2之间反应的能垒,促进了反应性能.     

Pt，Pd助剂对Ni基催化剂中Ni的分散度及抗积碳性能的影响

研究了添加少量贵金属(Pt,Pd)的Ni/Al2O3催化剂对甲烷水蒸汽重整反应抗积碳能力和催化性能的影响.催化活性实验表明,添加少量Pt的样品显著提高了Ni/Al2O3催化剂的活性,稳定性,抗积碳和抗氧化能力,而添加Pd的样品对Ni/Al2O3催化剂的催化性能提高并不明显.利用氢气程序升温还原(H2-TPR),X射线晶体衍射(XRD),热重-差热分析(TG-DTA)等手段对反应前后的催化剂进行了表征,研究发现在Ni-Pt/Al2O3催化剂中Ni与Pt之间存在较强的相互作用力,在主要由Ni覆盖的表面形成了Ni-Pt双金属簇,提高了Ni的分散度,在催化剂的表面易于形成较小的Ni颗粒,抑制了Ni的烧结,改善了Ni基催化剂的抗积碳能力;贵金属Pt通过H2的溢流效应促进了Ni的还原,抑制了催化剂的氧化.而在Ni-Pd/Al2O3中,Ni和Pd存在着一定的偏析效应,不能有效的形成Ni-Pd双金属簇,在还原过程中分别被还原.     

Effect of CeO2 on the catalytic performance of Ni/Al2O3 for autothermal reforming of methane

The effect of promoter Ce on the catalytic performance of Ni/Al2O3 catalyst for autothermal reforming of methane to hydrogen was investigated. The catalysts were characterized by X-ray diffraction （XRD）, temperature-programmed reduction （TPR）, and X-ray photoelectron spectroscopy （XPS）. The results indicated that the catalytic performance of the catalysts was improved with the addition of Ce. Ni/Ce30Al70Oδ showed the highest CH4 conversion in operation temperatures ranging from 650 ℃ to 850 ℃. At the same time, the decrease in H2/CO ratio with increasing reaction temperature was consistent with the fact that water-gas shift reaction was thermodynamically unfavorable at higher temperatures. The XRD result indicated that adding Ce to Ni/Al2O3 catalyst prevented the formation of NiAl2O4 and facilitated the formation of NiO. The formation of NiO increased the number of active sites, resulting in higher activity. Comparing the TPR profiles of Ni/Ce30Al70Oδ with Ni/Al2O3, it could be clearly observed that with the addition of Ce, the total reduction peak areas in the middle and low temperatures increased. It was most probably that the addition of Ce inhibited the stronger interaction between Ni and Al2O3 to form the phase of NiAl2O4, and favored the formation of the strong interaction between NiO species and CeO2. Therefore, the addition of Ce to the Ni/Al2O3 catalyst increased the active surface that promoted the activity of the catalyst.     

EFFECTS OF RARE EARTH OXIDES ON PERFORMANCES OF Ni/Al_2O_3 CATALYSTS FOR METHANE STEAM REFORMING REACTION

The Catalytic performances for methane steam reforming reaction ofNi/Al_2O_3(commercial), Ni/Al_2O_3 (developed surface )and Ni/Al_2O_3-R_xO_y (R israre earth oxide) Catalysts were investigated by means of X-ray diffraction,TG, SEM/ X-ray analysis, pulse gas chromatography,BET and Mercuryporsiniter techniques. The distribution of rear earth oxides on the supports,themetal-support (additives) interaction and the influence of rare earth oxideadditives on the dispersion of active components,catulytic activities,variationof nickel crystallites size,CO chemisorption,formation of NiAl_2O_4 as well asthe reducibility of the catalysts were examined.The presence of rare earthoxides in the Ni/Al_2O_3 (developed surface) results in great improvement ofstubility through suppressing the growth of Ni crystallites,the oxidation of themetallic Ni and the formation of NiAl_2O_4. The effect of heavy rare earth oxidesis more distinct than that of the light ones.Strong metal support interaction(SMSI) exists in Ni/Al_2O_3- R     

PtSn/Al2O3/MCM-41催化剂的丙烷脱氢催化性能

用微型催化反应装置评价, 并结合X射线粉末衍射(XRD)、表面积和孔结构测试、程序升温还原(TPR)、氢化学吸附和热重分析等方法研究了负载型PtSn/γ-Al2O3, PtSn/MCM-41和PtSn/Al2O3/MCM-41催化剂的丙烷脱氢反应催化性能. 发现PtSn/Al2O3/MCM-41催化剂具有较PtSn/MCM-41催化剂高的丙烷脱氢反应活性和较PtSn/γ-Al2O3催化剂高的反应稳定性. 实验结果表明, 纯硅MCM-41载体表面的锡物种因与载体相互作用较弱故易被还原, 导致铂金属分散度和催化剂的丙烷脱氢活性较低. 用Al2O3修饰MCM-41可以增强Sn物种与Al2O3/MCM-41载体之间的相互作用, 提高PtSn/Al2O3/MCM-41催化剂铂金属分散度和丙烷脱氢催化活性. 并且, 积炭后的PtSn/Al2O3/MCM-41催化剂具有较高的铂金属表面裸露度, 故具有较高的丙烷脱氢反应稳定性. PtSn/Al2O3/MCM-41催化剂优良的丙烷脱氢催化性能可能不仅与Sn-载体Al2O3/MCM-41较强的相互作用有关, 而且与Al2O3/MCM-41载体的介孔结构有关.     

甲烷部分氧化制合成气Pt-Ni/Al~2O~3催化剂的研究

研究了Ni/Al~2O~3,Pt/Al~2O~3和一系列Pt-Ni/Al~2O~3催化剂对甲烷部分氧化制合成气的催化作用,发现Pt-Ni/Al~2O~3催化剂显示了比Ni/Al~2O~3和Pt/Al~2O~3更高的活性和稳定性。H~2-TPR,CO-TPD,CO~2-TPD,SEM,XPS和XRD等结果证明:Pt和Ni之间存在较强的相互作用,Pt和部分Ni形成固溶体合金并且Pt在催化剂表面富集。Pt和Ni之间的相互作用提高了催化剂的活性和稳定性,甲烷在Pt-Ni/Al~2O~3上的催化部分氧化具有不同于在Pt/Al~2O~3和Ni/Al~2O~3上的反应性能。     

PROMOTING EFFECT OF RARE EARTH OXIDES ON Ni/Re_xO_y-Al_2O_3 CATALYST FOR PARTIAL OXIDATION OF METHANE TO SYNTHESIS GAS

IntroductionSynthesisgas(HZ CO)isproducedfrommethanemoshybysteamrefonningwhichsuffersfromlimitationssuchasveryhighenergyrequirements,complicatedequipmentandinstallations,highHZ/COproductratioandpoorselectivityforcarbonmonoxide.Recently,manyresearchershave…     

还原态WO_3/Al_2O_3,NiO/Al_2O_3和NiO-WO_3/Al_2O_3催化剂上H_2,CO,O_2的吸附特性

在加氢精制和许多其它催化过程中,Mo,W是主要的活性组分,Co,Ni通常作为助剂,有关Co-Mo体系的研究文献报导很多~[1.2], 但由于钨较难还原和硫化,关于     

助剂形态对Pt/γ-A12O3催化剂抗积炭性能的影响

采用CO和H2脉冲吸附、程序升温还原、NH3程序升温脱附及X射线衍射等手段对各金属氧化物改性的Pt/Al2O3催化剂进行了表征,研究了助剂形态对Pt/Al2O3催化剂在非临氢条件下催化环己烷脱氢反应性能的影响.结果表明,催化剂稳定性从高到低依次为Zr-Pt/Al2O3＞ Ca-Pt/Al2O3＞ Ce-Pt/Al2O3...     

钡改性的Ni/γ- Al2O3催化剂用于甲烷部分氧化的研究

800 ℃、80 000 h－1、CH4/O2/N2=14/7/79下比较了质量分数20%的Ni/γ- Al2O3和Ba改性的Ni/γ- Al2O3催化剂，用于甲烷部分氧化反应的活性和选择性。结果表明，Ba的添加提高了镍基催化剂的活性和稳定性。BET和XRD表明，Ba的加入有利于高温焙烧下抑制大颗粒的Ni Al2O4的形成，保持了高比例的活性镍组分，提高了催化剂催化活性。常压下，xCH4接近100%，sCO、sH2达到92.2%和98.1%，催化剂15 h内活性稍微下降。Ba的加入使Al2O3的晶型转化温度由800 ℃提高到900 ℃，提高了载体的稳定性。     

硫化态NiW/Al2O3催化剂加氢脱硫活性相的研究Ⅲ.低温CO吸附-原位红外光谱表征

 采用低温CO吸附-原位红外光谱法对硫化态和经过氢还原处理的W/Al2O3,Ni/Al2O3以及不同Ni含量的NiW/Al2O3催化剂进行了表征. 结果表明,在WS2相上的两个CO特征吸收峰分别位于2117和2066 cm-1处; 硫化镍上吸附CO的特征峰位于2098 cm-1处; NiW/Al2O3催化剂中引入的助剂Ni与WS2相之间相互作用,并分别在2128,2096和2078 cm-1处出现三个新的谱峰,标志着NiWS活性相的形成,并且NiWS相的量随着助剂Ni含量的增加而增大. 在不同温度下对NiW/Al2O3催化剂进行氢还原处理时发现,NiWS活性相在高温下逐步分解,并发生烧结. 以上结果有力地支持了前文中通过XPS,HREM和TPR等方法所获得的有关催化剂活性相的形成及其还原分解过程的表征结果.     

Surface properties of Ni-Pt/SiO2 catalysts for N2O decomposition and reduction by H2

The surface properties of bimetallic Ni-Pt/SiO2 catalysts with variable Ni/Ni + Pt atomic ratio (0.75, 0.50, and 0.25) were studied using N2O decomposition and N2O reduction by hydrogen reactions as probes. Catalysts were prepared by incipient wetness impregnation of the silica support with aqueous solutions of the metal precursors to a total metal loading of 2 wt %. For both model reactions, Pt/SiO2 catalyst was substantially more active than Ni/SiO2 catalyst. Mean particle size by TEM was about the same (in the range 6-8 nm) for all catalysts and truly bimetallic particles (more than 95%) were evidenced by EDS in the Ni-Pt/SiO2 catalysts. CO adsorption on the bimetallic catalysts showed differences in the linear CO absorption band as a function of the Ni/Pt atomic ratio. Bimetallic Ni-Pt/SiO2 catalysts showed, for the N2O decomposition, a catalytic behavior that points out an ensemble-size sensitive behavior for Ni-rich compositions. For the N2O + H2 reaction, the bimetallic catalysts were very active at low temperature. The following activity order at 300 K was observed: Ni75Pt25 > Ni25Pt75 approximately Ni50Pt50 > Pt. TOF values for these catalysts increased 2-5 times compared to the most active reference catalyst (Pt/SiO2). The enhancement of the activity in the Ni75Pt25 bimetallic catalysts is explained in terms of the presence of mixed Ni-Pt ensembles.     

CO_2 Reforming of CH_4 over Ni/CeO_2-ZrO_2-Al_2O_3 Prepared by Hydrothermal Synthesis Method

The Ni/CeO2-ZrO2-Al2O3 catalyst with different Al2O3 and NiO contents were prepared by hydrothermal synthesis method. The catalytic performance for CO2 reforming of CH4 reaction, the interaction among components and the relation between Ni content and catalyst surface basicity were investigated. Results show that the interaction between NiO and Al2O3 is stronger than that between NiO and CeO2-ZrO2.The addition of Al2O3 can prevent the formation of large metallic Ni ensembles, increase the dispersion of Ni, and improve catalytic activity, but excess Al2O3 causes the catalyst to deactivate easily. The interaction between NiO and CeO2 results in more facile reduction of surface CeO2. The existence of a small amount of metallic Ni can increase the number of basic sites. As metallic Ni may preferentially reside on the strong basic sites, increasing Ni content can weaken the catalyst basicity.     

CO2 Reforming of CH4 over Ni／CeO2-ZrO2-Al203 Prepared by Hydrothermal Synthesis Method

The Ni/CeO2-ZrO2-A12O3 catalyst with different A12O3 and NiO contents were prepared by hydrothermal synthesis method. The catalytic performance for CO2 reforming of CH4 reaction, the interaction among components and the relation between Ni content and catalyst surface basicity were investigated. Results show that the interaction between NiO and A12O3 is stronger than that between NiO and CeO2-ZrO2. The addition of A12O3 can prevent the formation of large metallic Ni ensembles, increase the dispersion of Ni, and improve catalytic activity, but excess A12O3 causes the catalyst to deactivate easily. The interaction between NiO and CeO2 results in more facile reduction of surface CeO2. The existence of a small amount of metallic Ni can increase the number of basic sites. As metallic Ni may preferentially reside on the strong basic sites, increasing Ni content can weaken the catalyst basicity.     

Pt／Al_2O_3，Pd／Al_2O_3催化剂上CO氧化与表面氧脱出－恢复性能

Ｐｔ／Ａｌ_２Ｏ_３，Ｐｄ／Ａｌ_２Ｏ_３催化剂上ＣＯ氧化与表面氧脱出－恢复性能周仁贤，郑小明（杭州大学催化研究所，杭州３１００２８）关键词铂，钯，氧化铝，氧化锆，负载型催化剂，一氧化碳，氧化，氧脱附ＡＩ。Ｏ。负载的贵金属（Ｐｔ，Ｐｄ或Ｒｈ等）催化剂对有...     

碱性助剂的添加对Ni/CaO-Al2O3催化剂性能的影响

在CH4、 CO2和O2制合成气的反应中, 通过在Ni/CaO-Al2O3催化剂中添加碱性助剂K2O、 MgO和La2O3, 使催化剂的性能得到了改善. 实验结果表明, MgO和La2O3助剂的添加, 有利于提高催化剂的活性;添加K2O, 却相反. 测得催化剂上积炭量的顺序为: Ni-La2O3/CaO-Al2O3相似文献