Calix[6]pyrrole and hybrid calix[n]furan[m]pyrroles (n+m=6): syntheses and host-guest chemistry

Calix[6]pyrrole 2 and the "hybrid systems" calix[3]furan[3]pyrrole 12, calix[2]furan[4]pyrrole 13, and calix[1]furan[5]pyrrole 14, have been synthesized by increasing conversion of the furan units present in the readily accessible calix[6]furan 3 to pyrroles. The host-guest chemistry of these novel macrocycles towards a number of anions, including halogen ions, dihydrogen phosphate, hydrogen sulfate, nitrate, and cyanide has been investigated in solution by (1)H NMR titration techniques and/or phase transfer experiments. The solid-state structures of the free receptors 2, 12, and 13, the 1:1 complexes of calix[6]pyrrole 2 with chloride and bromide, and the 1:1 complex of 14 with chloride are also reported.     

Squaramide-substituted calix[4]pyrrole: Synthesis and ion binding studies

Squaramide-substituted calix[4]pyrrole 2 was synthesized and its anion-binding properties were investigated. On the basis of UV spectroscopy, ¹H NMR spectroscopic and computational DFT model analyses, compared with the parent calix[4]pyrrole 1, compound 2 shows significantly enhanced binding affinities for anions in CH₂Cl₂, and it was concluded that this increase in affinity is ascribed to participation of the squaramide unit in anion binding.     

Anion binding studies of fluorinated expanded calixpyrroles

The anion binding properties of fluorinated calix[n]pyrroles (n = 4-6) in aprotic solvents (acetonitrile and DMSO) and modified reaction conditions allowing for the synthesis and isolation of the hitherto missing dodecafluorocalix[6]pyrrole from the condensation of 3,4-difluoro-1H-pyrrole and acetone are described. In acetonitrile solution containing 2% water, the association constants for the 1:1 binding interaction between octafluorocalix[4]pyrrole and chloride anion obtained with isothermal titration calorimetry (ITC) and (1)H NMR titration methods were found to match reasonably well. As compared to its nonfluorinated congener, octafluorocalix[4]pyrrole was found to display enhanced binding affinities for several representative anions in pure acetonitrile as judged from ITC analyses. Similar analyses of the fluorinated calix[n]pyrroles revealed an increase in the relative affinity for bromide over chloride with increasing macrocycle size, as manifest in a decrease in the binding ratio K(a(Cl))/K(a(Br)). Anion binding studies in the solid state, involving single-crystal X-ray diffraction analyses of the chloride and acetate anion complexes of octafluorocalix[4]pyrrole and decafluorocalix[5]pyrrole, respectively, confirmed the expected hydrogen bond interactions between the pyrrolic NH protons and the bound anions.     

N-confused calix[4]pyrroles

This is a first review devoted to N-confused calix[4]pyrroles (NCCPs). NCCPs are a relatively recent arrival to the family of the pyrrole-based anion binding macrocycles, being for the first time identified in 1999. Yet, in a relatively short time these calix[4]pyrrole (CP) isomers attracted attention of the community of research groups interested in anion binding and sensing. This is because they are relatively easy to synthesize, but mainly because they posses anion-binding properties that are different from that of regular calix[4]pyrroles. The difference in anion-binding properties stems from a different binding mode between the NCCP and anion. While the regular CPs adopt in the complex an ideal cone-like conformation where all four pyrroles-NHs engage in hydrogen bonding to the anion, the inverted pyrroles do not allow forming the cone. NCCPs bind anions via a confused cone (CC), by three NH hydrogen bonds with an anion and a CH–anion contact. This different binding mode results also in different anion-binding affinity and selectivity compared to regular CPs. Also, the inverted pyrroles offer a unique possibility for selective chemical modification of the receptor. The corresponding colorimetric sensors were tested for anion binding applications. The results of colorimetric assays for anions are presented and potential applications discussed.     

Tuning the anion binding properties of calixpyrroles by means of p-nitrophenyl substituents at their meso-positions

Extended cavity calix[4]pyrroles and a calix[6]pyrrole were synthesized by cyclization of 5-methyl-5-(4-nitrophenyl)dipyrromethane with acetone in the presence of acid. The solid-state structures of the novel macrocycles were determined by X-ray crystallography. The host-guest chemistry of these receptors towards halide ions was investigated in solution by ¹H NMR titration techniques and compared with those of the meso-octamethylcalix[4]pyrrole and meso-dodecamethylcalix[6]pyrrole. The binding of chloride anions was observed to occur with different affinities on the two faces of the novel calix[6]pyrrole derivative described here.     

Cation- and anion-assisted binding of triethylenediamine by zinc bisporphyrinates

The complexation of zinc calix[4]arene or calix[4]pyrrole bisporphyrinates with alkali metal cations, halide anions, and triethylenediamine was studied by ¹H NMR spectroscopy. It was established that the binding of molecules and/or charged particles by various fragments of calix[4]arene and calix[4]pyrrole porphyrins are interrelated processes. This makes it possible to use one process (for example, complexation of the calix[4]arene fragment of the macrocycle with alkali metal cations or complexation of the calix[4]pyrrole fragment with halide ions) as a tool for controlling another process (complexation of the porphyrin fragments of the macrocycle with neutral molecules).     

Coumarin-strapped calix[4]pyrrole: a fluorogenic anion receptor modulated by cation and anion binding

A new strapped calix[4]pyrrole containing a fluorophore as part of the strap has been synthesized and characterized. Association constants with various anions have been determined using both fluorescence titration and isothermal titrations calorimetry (ITC). The two sets of association constants were found to be in good agreement with one another. The fluorescence emission properties of this new receptor could be controlled by addition of Na+ (or H2O) and anions. However, the fluorescence quenching by anions is only observed in the presence of Na+ (or H2O). All the experimental evidence is consistent with the notion that independent PET processes are modulated by separate cation and anion recognition events. As such, this system operates as an elementary logic gate wherein anion and cation concentrations serve as the input and fluorescence intensity changes provide the output.     

Spectroscopic and spectrometric studies of anion recognition with calix[4]pyrroles in different reaction conditions

The binding studies of calix[4]pyrroles (1–6) with fluoro, chloro, bromo, iodo and sulphato anions generated from normal-tetrabutylammoniumfluoride, normal-tetrabutylammoniumchloride, normal-tetrabutylammoniumbromide, normal-tetrabutylammoniumiodide, and normal-tetrabutylammoniumsulphate respectively were investigated by electrospray ionization mass spectrometry (ESI-MS) in dichloromethane–acetonitrile in negative ion mode. The efficacy of a particular calix[4]pyrrole to bind with anions was found maximum at low cone voltage of the instrument, at high cone voltage the binding was suppressed due to removal of anion from the cavity of the macrocycles. The binding strength was found inversely proportional to the size of anion for a particular calix[4]pyrrole. The fragmentation pattern of calix[4]pyrrole was observed at higher cone voltage of ESI-MS and was interpreted. The association constants of calix[4]pyrroles and anions obtained from electronic transition studies were in good agreement with that observed from ¹H NMR titration studies.     

Siloxane-functionalized calix[4]pyrrole: synthesis, characterization and modification of silica-based solid supports

A siloxane-functionalized calix[4]pyrrole derivative was synthesized starting from the corresponding alcohol-functionalized calix[4]pyrrole. Structural elucidation was carried out by using NMR spectroscopy, mass spectrometry and X-ray diffraction analysis. The use of this siloxane-functionalized calix[4]pyrrole for modification of various silica solid supports (silica gel 60, fume silica, and SiO₂ nanopowder) was studied. Characterization of the modified silica solid supports was achieved by FTIR, TGA, and elemental analysis. It was also shown that the production of silica nanoparticles is possible via a sol-gel reaction of siloxane-functionalized calix[4]pyrrole and tetraethoxysilane (TEOS). Calix[4]pyrrole modified silica solid supports were found to sense chloride anions of Azure A dye.     

Anion binding behavior of heterocycle-strapped calix[4]pyrroles

A comparative study of the halide and benzoate anion binding properties of a series of phenyl, pyrrole, and furan-strapped calix[4]pyrroles has been carried out. These receptors, which have previously been shown to bind the chloride anion (Yoon et al., Angew. Chem., Int. Ed. 47(27):5038–5042, 2008), were found to bind bromide and benzoate anion (studied as the corresponding tetrabutylammonium salts) with near equal affinity in acetonitrile, albeit less well than chloride, as determined from ITC measurements or NMR spectroscopic titrations. This stands in marked contrast to the parent octamethylcalix[4]pyrrole, where the carboxylate anion affinities are substantially higher than those for bromide anion under identical conditions. This finding is rationalized in terms of tighter binding cavity present in the strapped systems. For all three anions for which quantitative data could be obtained (i.e., Cl^?, Br^?, PhCO₂ ^?), the pyrrole-strapped system displayed the highest affinity, although the relative enhancement was found to depend on the anion in question. In the specific case of fluoride anion binding to the pyrrole-strapped receptor, two modes of interaction are inferred, with the first consisting of binding to the calix[4]pyrrole via NH-anion hydrogen bonds, followed by a process that involves deprotonation of the strapped pyrrolic NH proton. A single crystal X-ray diffraction analysis provides support for the first of these modes and further reveals the presence of a methanol molecule bound to the fluoride anion.     

New insights on anion recognition by isomers of a calix pyrrole derivative

Two isomeric structures of meso-tetramethyltetrakis(3-hydroxyphenyl)calix[4]pyrrole, 4-alphaalpha betabeta and 4-alphabeta alphabeta, have been isolated and characterized by 1H NMR in different solvents (CD3CN, CD3OD, and DMSO-d6) at 298 K. Standard Gibbs energies of solution derived from solubility data in various solvents were used to calculate the transfer Gibbs energy, delta(t)G(o), of these ligands using acetonitrile as the reference solvent. These results are consistent with the 1H NMR studies in different media that show chemical shift changes observed in the resonances of the NH and the OH protons of these ligands. Solvate formation was observed when these isomers were exposed to saturated atmosphere of N,N-dimethylformamide, dimethyl sulfoxide and propylene carbonate. Anion interaction involving 4-alphaalpha betabeta and 4-alphabeta alphabeta was investigated by 1H NMR in CD3CN while the complex composition was assessed through conductance measurements. Significant differences are observed in the affinity of these ligands for anions as well as in the composition of the fluoride complexes. Thus 4-alphaalpha betabeta shows selectivity for H2PO4(-) in acetonitrile while its isomer 4-alphabeta alphabeta is selective for the fluoride anion. Again the complex composition is altered for the fluoride anion when complexed with 4-alphaalpha betabeta in acetonitrile (1:1 complex) relative to 4-alphabeta alphabeta in the same solvent. The latter isomer shows an enhanced hosting ability for this anion. Thus two anions are taken up per unit of ligand. The thermodynamics of complexation of H2PO4(-) and these ligands in acetonitrile is discussed, and the results are compared with those involving calix[4]pyrrole and this anion in this solvent. It is shown that the isomers interact with two H2PO4(-) anions while one calix[4]pyrrole unit interacts with this anion. This paper demonstrates for the first time that the enthalpy parameter may be a suitable reporter of the number of hydrogen bonds formed when calix[4]pyrrole and its derivatives interact with the dihydrogen phosphate anion in acetonitrile. In moving from acetonitrile to N,N-dimethylformamide, 4-alphaalpha betabeta is unable to enter complexation with most anions, except fluoride, with which the formation of a 1:2 (ligand:anion) complex is demonstrated. The rather versatile behavior of these receptors for anions is explained on the basis of 1H NMR evidence and solvation effects. These investigations highlight the importance of the medium effect on the stability of the complex and reflect the inherent nature of the solvent and its highly significant involvement in the complexation process.     

Conformational features and anion-binding properties of calix[4]pyrrole: a theoretical study

The conformational preference of calix[4]pyrrole and its fluoride and chloride anion-binding properties have been investigated by density functional theory calculations. Geometries were optimized by the BLYP/3-21G and BLYP/6-31G methods, and energies were evaluated with the BLYP/6-31+G method. To model the effect of medium, the SCIPCM solvent model was also employed. Four typical conformations of the parent substituent-free calix[4]pyrrole were studied. Both in the gas phase and in CH(2)Cl(2) solution, the stability sequence is predicted to be 1,3-alternate > partial cone > 1,2-alternate > cone. The cone conformation is predicted to be about 16.0 and 11.4 kcal/mol less stable in the gas phase and CH(2)Cl(2) solution, respectively. This is mainly due to electrostatic repulsions arising from the all-syn pyrrole/pyrrole/pyrrole/pyrrole arrangement present in this conformer. The existence of possible 1:1 and 1:2 anion-binding modes were explored in the case of fluoride anion, and the factors favoring the 1:1 binding mode are discussed. The calculated binding energy for fluoride anion is about 15 kcal/mol larger than that for chloride anion. The calculated binding energy for chloride anion agrees with the experimental value very well. The presence of meso-alkyl substituents destabilizes the cone conformer with respect to the 1,3-alternate conformer and, therefore, reduces the anion-binding affinity by 3-4 kcal/mol. The strength of N-H- - -anion hydrogen bonds in the various structures subject to study were estimated on the basis of the calculated anion-binding energies and the predicted structural deformation energies of substituent-free calix[4]pyrrole.     

Calix[n]bispyrrolylbenzenes: synthesis, characterization, and preliminary anion binding studies

A series of novel calixpyrrole-like macrocycles, calix[n]bis(pyrrol-2-yl)benzene (calix[n]BPBs, n=2-4) 9 a-11 a, have been synthesized by means of the TFA-catalyzed condensation reaction of bis(pyrrol-2-yl)benzene 8 a with acetone. Calix[2]BPB 9 a represents an expanded version of calix[4]pyrrole in which two of the four meso bridges are replaced by benzene rings. By contrast, systems 10 a and 11 a, which bear great considerable to calixbipyrroles 2 and 3, represent higher homologues of the basic calix[n]BPB motif. Solution-phase anion binding studies, carried out by means of (1)H NMR spectroscopic titrations in [D2]dichloromethane and isothermal titration calorimetry (ITC) in 1,2-dichloroethane, reveal that 9 a binds typical small anions with substantially higher affinities than 1, even though the same number of hydrogen bonding donor groups are found in both compounds. The basic building block for 9 a, benzene dipyrrole 8 a, also displays a higher affinity for anions than the building block for 1, dimethyldipyrromethane 16. Structural studies, carried out by single-crystal X-ray diffraction analyses, are consistent with the solution-phase results and reveal that 9 a is able to stabilize complexes with chloride and nitrate in the solid state. Structures of the PF6- and NO3- complexes of 10 a were also solved as were those of the acetone adduct of 9 a and the ethyl acetate adduct of 11 a.     

N-Tosylpyrrolidine calix[4]pyrrole: synthesis and ion binding studies

The synthesis and preliminary solution phase ion binding properties of the N-tosylpyrrolidine calix[4]pyrrole 2 are reported. This β-octaalkyl-substituted calix[4]pyrrole, the first to be prepared via a direct condensation reaction, was obtained by reacting the 3,4-alkyl-functionalized pyrrole 8 with acetone in the presence of an acid catalyst. On the basis of (1)H NMR spectroscopic analyses and isothermal titration calorimetry, it was concluded that, compared with the parent, β-unsubstituted calix[4]pyrrole (1), compound 2 possesses significantly enhanced binding ability for halide anions in chloroform. Furthermore, 2 proved capable of solubilizing in chloroform solution the otherwise insoluble salts, CsF and CsCl. These effects are ascribed to the interactions between the four tosyl groups present in 2 and the counter cations of the halide anion salts.     

Double-cavity calix[4]pyrrole derivative with enhanced capacity for the fluoride anion

A double-cavity calix[4]pyrrole derivative, meso-tetramethyl-tetra[N-(2-phenoxyethyl)-N'-phenylurea]calix[4]pyrrole, 1, with enhanced hosting ability for the fluoride anion has been designed and characterized. Its interaction with anions (fluoride, chloride, bromide, iodide, dihydrogen phosphate, hydrogen sulfate, perchlorate, nitrate, and trifluoromethane sulfonate) was qualitatively and quantitatively assessed through 1H NMR, conductance, and calorimetric studies. The outcome of these investigations demonstrates that 1 interacts only with fluoride and dihydrogen phosphate anions in dipolar aprotic media. However, the composition of these complexes differs in that two units of fluoride are taken per unit of 1, while a 1:1 anion/ligand complex is formed with the dihydrogen phosphate anion. Results from the 1H NMR studies are striking in that these not only provide information about the active sites of the ligand-anion interaction but also allow the establishment of the sequence of events taking place during fluoride complexation. Thus, hydrogen-bond formation between the pyrrolic hydrogen and the fluoride anion is followed by the uptake of a second anion through the same type of interaction, but with the phenyl urea. It is also the latter group that is responsible for the interaction of 1 with the dihydrogen phosphate anion. Finally, this paper illustrates the importance of structural information for the interpretation of the thermodynamics associated with these systems.     

Single side strapping: a new approach to fine tuning the anion recognition properties of calix[4]pyrroles

Three calix[4]pyrroles bearing m-orcinol-derived diether straps of different lengths on one side of the tetrapyrrolic core have been synthesized and characterized. Structural information for an analogous diester bridged strapped system reported previously (Yoon, D. W.; Hwang, H.; Lee, C. H. Angew. Chem., Int. Ed. Engl. 2002, 41, 1757-1759) is also provided as are bromide and chloride anion affinities for all four systems determined by Isothermal Titration Calorimetry (ITC) in acetonitrile. Although both sets of the strapped calix[4]pyrroles displayed enhanced affinities for chloride and bromide anion, differences were seen among the various receptors that support the conclusion that the anion binding ability of calixpyrrole-type systems can be effectively tuned by modifying the length and nature of the bridging straps. In the specific case of the diether systems, the largest chloride affinity was seen with the shortest strap, whereas the largest affinity for bromide anion was recorded in the case of the longest strap. On the basis of these findings, as well as supporting (1)H NMR spectroscopic studies, it is postulated that not only cavity size per se, but also the ability of the aryl portion of the strap to serve as a CH hydrogen bond donor site are important in regulating the observed anion affinities.     

Metalloporphyrin-capped calix[4]pyrroles: heteroditopic receptor models for anion recognition and ligand fixation

Diametrically strapped calix[4]pyrrole-metalloporphyrin conjugates, potential hosts for anionic guests, have been synthesized and characterized. The syntheses rely on the acid-catalyzed condensation of two dipyrromethane bearing Ni(II) porphyrins with acetone. An (1)H NMR spectroscopic titration experiment indicated that the resulting receptors selectively trapped fluoride anions in organic media but not other, larger halide anions. The experimental results from titration and Job plots indicated that the bound fluoride anion must reside inside the cavity. The current systems provide a well-defined illustration of how size-selective anion receptors may be synthesized by incorporating recognition functions, such as Lewis acidity, hydrogen bonding, and encapsulating moieties into established recognition motifs, calix[4]pyrrole in the present instance.     

Sulfur-containing hetero-calix[4]pyrroles as mercury(II) cation-selective receptors: thermodynamic aspects

Two sulfur-containing hybrid calix[4]pyrrole derivatives (III and IV) have been synthesized and fully characterized. Several analytical techniques (1H NMR, conductance measurements, UV-vis spectrophotometry, titration potentiometry, and titration calorimetry) have been used to assess the interaction between these hybrid calixpyrrole receptors and metal cations in acetonitrile and dimethylsulfoxide. The partition constants of calix[4]pyrrole, I, II, and IV in the acetonitrile-hexane solvent system and the solubilities of the ligands in various solvents at 298.15 K were determined. 1H NMR measurements reveal the sites of interaction of calixpyrrole ligands with metal cations in CD3CN. Conductance and UV-vis spectrophotometric measurements were performed to establish the composition of mercury(II) calixpyrrole complexes in acetonitrile at 298.15 K. Titration calorimetry was used to quantitatively assess Hg(II)-calixpyrrole interactions. Thus the thermodynamics of complexation of calixpyrrole ligands with the mercury(II) cation in acetonitrile at 298.15 K are reported. Potentiometric titrations were also used to establish the stepwise stability constants for the complexation of calix[3]thieno[1]pyrrole with the Hg(II) cation in acetonitrile at 298.15 K. The results show that replacement of one or more pyrrole units by thiophene rings in calix[4]pyrrole has tuned significantly the discrimination ability of these ligands between anions and enables the produced hybrid calixpyrroles to bind selectively with Hg(II) in acetonitrile. No interaction was observed between these ligands and other metal cations in acetonitrile.     

Missing-link macrocycles: hybrid heterocalixarene analogues formed from several different building blocks

The synthesis and structural characterization of hybrid heterocalix[4]arene analogues containing pyrrole, benzene, methoxy-substituted benzene, and pyridine subunits is described. Macrocycles 1 and 2, examples of calix[2]benzene[2]pyrrole and calix[1]benzene[3]pyrrole systems, respectively, are synthesized by the condensation of pyrrole and an appropriate phenylbis(carbinol). Macrocycles 3 and 7, examples of calix[2]benzene[1]pyridine[1]pyrrole and calix[1]pyridine[3]pyrrole, respectively, are synthesized by the use of a carbene-based pyrrole-to-pyridine ring-expansion procedure. Single-crystal X-ray analysis reveals that compounds 1a, 1b, and 2b adopt 1,3-alternate conformations in the solid state, whereas compounds 3 and 7 display structures that are best described as "flattened partial cones" in terms of their conformation. (Series a refers to pure benzene-derived systems, whereas series b indicates macrocycles containing 5-methoxyphenyl subunits). In the solid state, the methoxy-functionalized macrocycles 1b and 2b, and the chloropyridine-containing macrocycle 7 exist as dimers. In the case of 1a and 7, these compounds interact with neutral solvent in the solid state. The conformations of the macrocycles in solution were explored by temperature-dependent proton NMR and NOESY spectral analysis. At 188 K, macrocycles 1a and 2a adopt flattened 1,3-alternate conformations, whereas macrocycles 3 and 7 exist in the form of flattened partial-cone conformations. Standard proton NMR titration analyses were carried out in the case of macrocycles 1a and 2a, and reveal that at least the second of these systems is capable of binding fluoride and chloride anions in CD(2)Cl(2) solution at room temperature (K(a)=571 and 17M(-1) in the case of 2a and F(-) and Cl(-), respectively).     

Analytical applications of nano-baskets of calix[4]pyrroles

Calix[4]pyrrole is one such class which holds a great promise in the fields of sensors and their unique behavior as sensors owes to its structural flexibility. Anion binding ability of calix[4]pyrrole has been modified in a variety of ways. Introduction of electron releasing and electron withdrawing groups at the meso position or at β-pyrrolic positions leads to calix[4]pyrrole with deep cavities and fixed walls which shows increased selectivity and modified binding effects. Strapping of calix[4]pyrrole is another way to modify its structural behavior which is responsible for its binding behavior. Choice of strap could play a profound role not only in increasing the intrinsic anion binding affinity of calix[4] pyrrole, but also in modulating the receptor anion stoichiometry, thereby modifying potentially the inherent anion binding selectivity. Calix[n]pyrroles with extended cavities have also been synthesized. Such as calix[3]bipyrrole binds bromide substantially with high affinity than calix[4]pyrrole. Calix[4]pyrrole has also been used to produce anion sensors that can report the presence of anion by means of a color change. The medium effect on the complexation of calix[4]pyrrole and anion has been investigated in various solvents. Calix[4]pyrrole has also been used to increase the ionic conductivity of solid polymer electrolyte by anion complexation of the metal salt. Calix[4]pyrrole has been used to obtain optical sensors using surface plasmon resonance technique. Composite films of cellulose acetate containing calix[4]pyrrole has also been reported which has potential usage in packaging, storage and preservation. In nut shell, calix[4]pyrrole can be modified in a variety of ways to form versatile sensors which can be used in variety of ways in various areas.