CO adsorption on copper in alkaline electrolytes: an electrochemical and ellipsometric study

The influence of CO on the passive behavior of copper was analyzed in the potential region near the rest potential in borax solutions (pH 9.2) by cyclic voltammetry, ellipsometry, and surface charge determination techniques. The oxide formation is explained as a sequence of Cu(2)O growth, cation adsorption, Cu(II), and dissolution steps, similarly to previously reported investigations for the metal in free CO solutions. The CO adsorption hinders the cationic defect in the outer oxide layer and accelerates the Cu(2)O growth both at open circuit and in controlled potential experiments. The isoelectric point, iep, obtained at pH 10.8 for both the metal Cu and CuO particles in KCl solutions shifts to pH 10.1 for copper particles in the presence of CO. The iep indicates a CuO coating on Cu metallic particles in the absence of CO.     

In situ FTIR spectroscopic study on crystallization process of isotactic polystyrene

The melt crystallization process of isotactic polystyrene (i-PS) was studied by means of in situ Fourier transform infrared (FTIR) spectroscopy, with a focus on the conformational changes during the induction period. The spectra obtained during the induction period suggested the occurrence of some ordered structure that is characterized by higher regularity and packing of the helical moieties than observed in the melt. This ordered structure was clearly different from the amorphous structure, and close to the crystal structure. The Avrami analysis indicated that the formation process of the ordered structure at the late stage of the induction period is similar to the growth process of the crystallites after the induction period. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1227–1233, 1998     

Adsorption of organic anions on iron in aqueous solutions: An ellipsometric study

Adsorption of anions of higher aromatic amino acids on the surface of iron from aqueous solutions is studied by an ellipsometric method concurrently with electrochemical measurements. It is demonstrated that ellipsometry is an effective method for studying in situ regularities governing the adsorption of anions of organic acids on the surface of metallic electrodes. Variations of ellipsometric parameters with the adsorbate concentration make it possible to obtain adsorption isotherms and determine adsorption characteristics.     

Polypeptide multilayer films on colloidal particles: an in situ electro-optical study

The buildup of poly(L-glutamic acid) (PGA) and poly(L-lysine) (PLL) multilayers on beta-FeOOH colloidal particles was investigated by means of electro-optics and electrophoresis. The films were built at different (acidic) pH in the absence of salt. We found that the thickness of the film grows linearly when the fully charged PLL (at pH 5.5) is combined with almost fully charged PGA (at pH 6.5), with a thickness of about 2 nm per single layer. When the fully charged PLL is combined with weakly charged PGA (at pH 4.5), the film thickness increases exponentially with the number of deposited layers. The thickness of the exponentially growing film increases to 300 nm after deposition of 16 layers. The exponential film growth is attributed to the ability of the PLL to diffuse "in" and "out" of the film bulk at each deposition step. The variation in the electrical polarizability of the film-coated particles was also monitored as a function of the number of adsorbed layers. The result reveals that the PLL chains, which can diffuse into the film bulk, have no measurable contribution to the electro-optical effect of the films terminated with PLL. It is only due to the polarization of counterions of the PLL adsorbed on the film surface.     

Deformation behavior of triblock copolymers based on polystyrene: an FT-IR spectroscopy study

The effect of the long range order and thermal treatment on the micromechanical deformation of two triblock copolymers was investigated, i.e. polystyrene-b-polybutadiene-b-polycaprolactone (SBC) triblock copolymer with PS as the matrix and PCL cylindrical domains and a SBS triblock copolymers with 75 wt% of styrene. FTIR spectroscopy revealed information about the molecular orientation upon deformation of the separate components in the triblock copolymers. Films of SBC possess a higher ductility when the semi-crystalline PCL cylindrical microdomains are quenched. In this case, the deformation proceeds via cavitation of the PCL domains and subsequent shear yielding. Long range order of the cylinders leads to embrittlement since crazes formation and crack propagation can proceed along the cylindrical axis. For the SBS triblock copolymers, a morphological transition from lamellar to short rod cylindrical microdomains was obtained by changing the casting solvent from toluene to MEK, while macroscopic orientation could be achieved by compression molding in a channel die. The toluene cast films were ductile and deformed in a homogeneous way. The MEK cast films behaved brittle as a result of crazing. Loading parallel to the lamellae results in yielding by propagation of a stable macroscopic neck.     

D-penicillamine adsorption on gold: an in situ ATR-IR spectroscopic and QCM study

The adsorption of penicillamine from ethanol on gold was studied in situ by attenuated total reflection infrared (ATR-IR) and quartz crystal microbalance (QCM) experiments. Both ATR-IR and QCM reveal a fast mass uptake. In ethanol, the molecule adopts a zwitterionic form. Upon adsorption, part of the molecules deprotonate at the amine group, which is a relatively slow process that goes along with a strong shift of the nu(as)(COO(-)) mode. Both ATR-IR and QCM confirm a physisorbed layer. ATR-IR furthermore shows that the latter consists of zwitterionic molecules only, whereas both zwitterionic and anionic species are found in the chemisorbed layer. The infrared spectra of the physisorbed and chemisorbed layers are rather different, and the molecules within both layers seem to be oriented with respect to the surface. The ATR-IR spectra furthermore indicate that all three functional groups of penicillamine (i.e., thiol, carboxylate, and amine) interact with the surface, and density functional theory calculations support this finding. QCM also shows that the molecule uses considerably more space on the surface than molecules of similar size, which supports a three-point interaction. The latter leads to a strong anchoring of the molecule to the metal, which may explain the exceptional capability of penicillamine to bind metals.     

In situ monitoring of atomic layer deposition in nanoporous thin films using ellipsometric porosimetry

Ellipsometric porosimetry (EP) is a handy technique to characterize the porosity and pore size distribution of porous thin films with pore diameters in the range from below 1 nm up to 50 nm and for the characterization of porous low-k films especially. Atomic layer deposition (ALD) can be used to functionalize porous films and membranes, e.g., for the development of filtration and sensor devices and catalytic surfaces. In this work we report on the implementation of the EP technique onto an ALD reactor. This combination allowed us to employ EP for monitoring the modification of a porous thin film through ALD without removing the sample from the deposition setup. The potential of in situ EP for providing information about the effect of ALD coating on the accessible porosity, the pore radius distribution, the thickness, and mechanical properties of a porous film is demonstrated in the ALD of TiO(2) in a mesoporous silica film.     

In situ synthesis of mixed-valent manganese oxide nanocrystals: an in situ synchrotron X-ray diffraction study

Phase transformations of materials can be studied by in situ synchrotron X-ray diffraction. However, most reported in situ synchrotron XRD studies focus on solid state/gel systems by measuring phase/structure changes during application of pressure or heat. Phase transformations during material synthesis and their applications, especially in wet chemistry processes with different media, have not drawn much attention. Here, using manganese oxides as examples, we report the successful characterization of phase transformations in in situ hydrothermal synthesis conditions by the in situ synchrotron XRD method using a quartz/sapphire capillary tube as the synthesis reactor. The results were used for better design of materials with controlled structures and properties. This method can be generally used for synthesis of manganese oxides as well as for in situ characterization of other material syntheses using hydrothermal, sol-gel, and other methods. In addition, catalytic processes in liquid-solid, gas-solid, and solid-solid systems can also be studied in such an in situ way so that catalytic mechanisms can be better understood and catalyst synthesis and catalytic processes can be optimized.     

Viscometric study on the miscibility of polystyrene/brominated polystyrene blends

The miscibility of polystyrene/brominated polystyrene blends (PS/PBrS) was investigated by using dilute-solution viscometry (DSV) method. The intrinsic viscosity and the viscometric parameters of this system have been determined at 20 ± 0.1 °C for prepared several PS/PBrS compositions (85/15, 75/25, 50/50, 25/75, 10/90). The binary systems were prepared in chloroform at five different concentrations; 0.15, 0.30, 0.60, 0.90, 1.20 g 100 ml⁻¹. The miscibility criteria on the basis of the sign of Δ[η] _m, Δb and Δb′, which are based on the difference between experimental and ideal values of [η]_m, and b_m were calculated by applying the Garcia et al., Catsiff-Hewett and Krigbaum-Wall theoretical equations. The thermodynamic parameter, α, modified thermodynamic parameter, β, and interaction parameter, μ, were also estimated. The data obtained from the viscometry studies showed that the examined blends were immiscible in all the compositions range besides the composition (10/90). The results from the DSV method are correlated with the miscibility data obtained for the same blend by differential scanning calorimetry (DSC) find.     

Structure of thiocyanate adlayers on Rh(111): an in situ STM study

In situ scanning tunneling microscopy (STM) was used to examine the structure of thiocyanate adlayers specifically adsorbed on Rh(111) in solutions of potassium hydroxide and perchloric acid, both containing potassium thiocyanate (KSCN). An atomically flat terrace-step structure was consistently observed on Rh(111) surfaces prepared by the flame-annealing-quenching method. The Rh(111)-(1 × 1) atomic structure was discerned on the atomically flat terrace even in the alkaline solution. High-resolution STM images disclosed two different structures of the SCN⁻ adlayers, () and (2 × 2), in the alkaline and the acidic media, respectively. In each structure, an individual adsorbed SCN⁻ ion appeared as a single spot with a constant corrugation height in STM images, suggesting that SCN⁻ ions adsorbed predominantly with their S-ends at particular bonding sites on Rh(111). The difference in the adlayer structure in the two solutions can be attributed to the interaction between adsorbed SCN⁻ and coadsorbed K⁺ in the alkaline solution, and is different from that between adsorbed SCN⁻ and H⁺ in the acidic solution. Received: 26 February 1997 / Accepted: 3 March 1997     

Hydrodynamic interaction effects on intrinsic viscosity of perturbed chains: Experimental results for polystyrene

Experimental measurements of intrinsic viscosity and radii of gyration of monodisperse samples of polystyrene of molecular weights 2.33 X 10⁵, 4.11 X 10⁵, 6.70 X 10⁵, and 2.3 X 10⁶ dissolved in the homologous series of 1-chloroparaffins from butane to undecane are reported. The dependence of the viscosity expansion coefficient α_η on the expansion factor α_s for the radius of gyration is discussed in the light of the results obtained by an expansion of the Fixman theory for perturbed chains to include partial draining. These results give support to the finite chain effect on the hydrodynamics of expanded coils in the usual range of molecular weight. The exponent a in the relation α³_η = α^a_s depends on molecular weight and agrees with recent nondraining theoretical calculation for exceedingly high polymers.     

An in situ SERS and FTIRAS study of salicylate interaction with copper electrode

The salicylate anion (ortho-hydroxy-benzoate-C₆H₄OHCOO⁻) interacts with common metals forming a semi-passivating layer on the surface. This semi-passivating layer allows the application of relatively high positive potentials without significant dissolution of the metal. It enables the electro-synthesis of conducting polymers (e.g. polyaniline, polypyrrole) directly on the metal surface, and such polymeric layers can act as anti-corrosion materials. Notwithstanding this characteristic, the behavior of salicylate on different metal surfaces is not yet well-understood. In the present work, the interaction of salicylate with copper (a metal of great interest in the industry) was studied. For this purpose, in situ surface enhanced raman scattering (SERS) and Fourier transform infrared absorption spectroscopy (FTIRAS) experiments were performed. The results show the formation of a copper(II) salicylate complex in the solution since low potentials (ca. 0 V vs Ag/AgCl). At higher potentials, salicylate decomposition is observed. FTIR spectra show the formation of CO₂ in solution, indicating salicylate decarboxilation. The SERS experiments indicate the breakage of the benzenic ring on the surface. It is suggested that at potentials above 0.6 V, a film of insaturated aliphatic chains linked by oxygen atoms is formed on the surface. This paper is dedicated in memoriam to Prof. Francisco Carlos Nart.     

Deposition from dopamine solutions at Ge substrates: an in situ ATR-FTIR study

Deposition from dopamine (DA) solutions at germanium (Ge) model substrates was monitored under stationary conditions using surface sensitive in situ attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy. ATR-FTIR spectra of the interfacial organic layer formed upon contact of TRIS buffered aqueous DA solutions to a Ge internal reflection element (IRE) showed conveniently strong diagnostic IR absorption bands, which were increasing with deposition time up to at least 6 h. Comparison of IR spectra of unreacted pristine DA, surface reacted, and bulk reacted material confirmed chemical reactions of DA to a polymerizate according to the literature. The found IR bands could be assigned to aromatic as well as C-O single bond moieties. The kinetic courses of the diagnostic band integrals showed an initial increase and saturation of the deposition after around 300 min, which could be empirically represented by an exponential damping function revealing a rather small kinetic constant. Highest deposition levels were found at pH = 8.5 (TRIS buffer or NaOH) in contrast to pH = 6.2, where no deposition occurred. Minor deposition was found in the presence of salt or at ZnSe instead of Ge due to the absence of reactive hydroxyl groups. The concentration dependence of DA deposition showed an initial increase and a saturation beginning at around 0.4 mg/mL (0.0022 M), where around 50 nm thick films featuring granular surface morphologies are formed. The adsorbed species are suggested to be smaller bulk reacted DA polymerizate particles with reactive end groups. Rinsing the formed films by pure TRIS buffer resulted in a time dependent release of deposited organic material by ≈23%, which could be represented by an exponential decay function. A saturation of the release after around 100 min and a larger kinetic constant compared to deposition could be determined. The released material is suggested to be larger aggregated bulk reacted DA polymerizate particles loosely bound to the surface by weak interaction forces.     

Glycine interaction with carbon nanotubes: an ab initio study

The interaction of the glycine radical on the side walls of both armchair and zigzag single walled carbon nanotubes is investigated by density functional theory. It is found that the interaction potential of the N-centered glycine radical with the tubes has a minimum of 16.9 (armchair) and 20.2 (zigzag) kcal/mol with respect to the dissociation products. In contrast, the C-centered radical, which is 22.7 kcal/mol lower in energy than the N-centered radical, does not form stable complexes with both types of carbon nanotubes.     

Enantiodiscrimination between an N-acetyl-L-cysteine SAM and proline: an in situ spectroscopic and computational study.

A combination of attenuated total reflection infrared (ATR-IR) and modulation excitation spectroscopy (MES) is used to study the enantiodiscriminating interactions between proline and a chiral, self-assembled monolayer (SAM) of N-acetyl-L-cysteine on gold. The N-acetyl-L-cysteine SAM consists of a mixture of protonated and deprotonated molecules. Whereas both species are influenced by adsorbed proline, only the deprotonated molecules are involved in enantiodiscrimination. Density functional theory (DFT) calculations reveal that electrostatics dominates the interaction between the two molecules. By modulating the absolute configuration of proline over the chiral SAM, and a subsequent phase-sensitive detection of the periodically varying signals in the ATR-IR spectra, the small spectral differences between the diastereomeric complexes are spotted. The resulting difference spectrum is in qualitative agreement with the spectrum predicted by the DFT calculations.