Photoluminescence analysis of α-Al2O3 powders doped with Eu and Eu ions

Alumina (Al₂O₃) powders doped with europium trivalent (Eu³⁺) were prepared by a low-temperature (∼280 °C) combustion synthesis technique. When the powder was heat treated at 1200 °C for 2 h in the presence of flowing ammonia (NH₃), α-Al₂O₃ crystalline ceramic powders was obtained. The analysis of the luminescence showed that Eu³⁺ was reduced to europium divalent (Eu²⁺) after the heat-treatment process. Under ultraviolet (UV) lamp excitation (λ=254 nm) these powders containing sub-microcrystalline structures present bright red (Al₂O₃:Eu³⁺) and green (Al₂O₃:Eu²⁺) luminescence indicating that this material is a potential candidate for applications in phosphor technology.     

Synthesis and luminescence properties of nanocrystalline Gd2O3:Eu by combustion process

The nanocrystalline Gd₂O₃:Eu³⁺ powders with cubic phase were prepared by a combustion method in the presence of urea and glycol. The effects of the annealing temperature on the crystallization and luminescence properties were studied. The results of XRD show pure phase can be obtained, the average crystallite size could be calculated as 7, 8, 15, and 23 nm for the precursor and samples annealed at 600, 700 and 800 °C, respectively, which coincided with the results from TEM images. The emission intensity, host absorption and charge transfer band intensity increased with increasing the temperature. The slightly broad emission peak at 610 nm for smaller particles can be observed. The ratio of host absorption to O²⁻-Eu³⁺ charge transfer band of smaller nanoparticles is much stronger compared with that for larger nanoparticles, furthermore, the luminescence lifetimes of nanoparticles increased with increasing particles size. The effects of doping concentration of Eu³⁺ on luminescence lifetimes and intensities were also discussed. The samples exhibited a higher quenching concentration of Eu³⁺, and luminescence lifetimes of nanoparticles are related to annealing temperature of samples and the doping concentration of Eu³⁺ ions.     

Synthesis, luminescence and crystallographic structure of Eu-doped garnet-type yafsoanite Ca3Te2(ZnO4)3

A red-emitting phosphor of Eu³⁺-doped calcium–tellurium–zinc oxide, Ca₃Te₂(ZnO₄)₃, with a garnet-type structure was synthesized by high temperature solid-state reactions. This phosphor exhibited a strong red emission. The photoluminescence excitation spectrum showed that Ca₃Te₂(ZnO₄)₃:Eu³⁺ can be effectively excited by UV–visible light. The property of long-wavelength excitation for this material has a benefit as a red phosphor in application of white light-emitting diodes. The colour coordinates were calculated. The excitation and emission spectra and luminescence decay curves were obtained using a pulsed, tunable, narrowband dye laser. Crystallographic sites and charge compensation mechanism of Eu³⁺ ions were discussed. The emission line from Eu³⁺ in intrinsic crystallographic site in the lattice was located at 579.56 nm. The emission line from Eu³⁺ in another disturbed site, which is created by the defects created by the charge-compensation, was located at 580.88 nm. The disordered crystallographic sites of Eu³⁺ are benefit for their strong red luminescence corresponding to the ⁵D₀→⁷F₂ transition.     

The influence of Eu3+ doping on photoluminescent properties of red emitting phosphor YInGe2O7:Eu3+ by microwave assisted and conventional sintering method

This paper describes an investigation of the crystalline morphology and photoluminescent properties of YInGe₂O₇ powders doped with different Eu³⁺ concentrations using microwave assisted sintering and conventional sintering. X-ray powder diffraction analysis confirmed the formation of monoclinic YInGe₂O₇ structure as YInGe₂O₇:Eu³⁺ powders were sintered at 1200 °C in microwave furnace for 1 h, and the raw material phase of Y₂O₃ was observed when Eu³⁺ concentration was below 30 mol%. Scanning electron microscopy showed microwave assisted sintering results in smaller particle size and more uniform grain size distribution. In the photoluminescent (PL) studies, the concentration quenching effect was observed under the excitation at 393 nm, but not under the excitation at CTS band. The ⁵D₀→⁷F₂ transition (620 nm), exhibits a non-exponential decay behavior as YInGe₂O₇:Eu³⁺ powders were sintered by microwave with the Eu³⁺ concentration higher than 50 mol%.     

Crystalline-phase-dependent red emission behaviors of Gd2O3:Eu3+ thin-film phosphors

Gd₂O₃:Eu³⁺ luminescent thin films have been grown on Al₂O₃(0001) substrates using pulsed-laser deposition. The films grown at different deposition conditions showed different crystalline phases, surface morphologies and luminescent characteristics. Both cubic and monoclinic crystalline phases were observed for the Gd₂O₃:Eu³⁺ films, and the crystalline structure and the surface morphology of the films were highly dependent on the oxygen pressure and substrate temperature. The cubic system showed a higher luminescence than the monoclinic system. The luminescence characteristics were strongly influenced by not only the crystalline structure but also the surface morphology of the films. The photoluminescencebrightness data obtained from Gd₂O₃:Eu³⁺ films indicate that Al₂O₃(0001) is a promising substrate for growth of high-quality Gd₂O₃:Eu³⁺ thin-film red phosphor. In particular, the Gd₂O₃:Eu³⁺ films showed a much better photoluminescence behavior than a Y₂O₃:Eu³⁺ films with the same thickness. PACS 78.20.-e; 78.55.-m; 78.66.-w     

Interaction of Sb ions with Eu ions during the room temperature synthesis of luminescent Sb2O3 nanorods: Probed through Eu luminescence

The interaction of Eu³⁺ with Sb³⁺ ions during the room temperature synthesis of luminescent Sb₂O₃ nanorods is investigated using luminescence and vibrational spectroscopic techniques. Our results demonstrate that well crystalline, oriented Sb₂O₃ nanorods having length of around 3-4 μm, a width of around 100-200 nm and luminescence at around 390 nm can be synthesized at room temperature. Incorporation of Eu³⁺ in these nanorods has been attempted and it is found that Eu³⁺ ions do not have any interaction with nanorods and their orientation. Detailed Eu³⁺ luminescence and XRD studies confirmed that a part of Sb³⁺ ions reacts with Eu³⁺ ions in the presence of hydroxyl ions (present in the medium) to form an amorphous antimony europium hydroxide compound. The amorphous compound on heating at high temperatures leads to its decomposition, giving hydrated Sb(V) oxides and Eu₂O₃ as major phases.     

Effect of the geometric shape of Lu 2 O 3 : Eu spherical nanocrystals on their spontaneous luminescence

Monodisperse red phosphor particles 100 nm in diameter with the Lu_1.90Eu_0.10O₃ composition have been prepared using the developed technique for synthesizing spherical colloidal lutetium oxide particles with a size dispersion in the range 10–15%. The structure of spherical nanoparticles has been investigated, their excitation and photoluminescence spectra have been analyzed, and the lifetime of the ⁵ D ₀ excited state of Eu³⁺ ions has been considered. It has been found that the luminescence decay time for spherical particles increases by a factor of 1.39 compared to that for a powdered phosphor Lu₂O₃: Eu (5 at %) prepared and treated under the same temperature conditions as the Lu₂O₃: Eu (5 at %) spherical particles. This effect has been associated with the change in the photonic local density of states in spherical optical cavities consisting of particles of the phosphor.     

二氧化锆纳米材料中Eu3+的发光特性

研究了掺1mol%Eu³⁺的二氧化锆纳米材料随退火温度变化的发光性质，得到退火温度为600和800℃的样品中Eu³⁺的⁵D₀→⁷F₂发射在604nm处，这种现象不多见. 几种经不同退火温度处理的纳米材料样品在紫外光的照射下，稀土离子Eu³⁺的⁵D₀→⁷F₂发射的发光逐 关键词： 二氧化锆 纳米材料 3+')" href="#">Eu³⁺ 发光     

Enhancement of luminescence properties of Eu:YVO4 in polymeric nanocomposites upon UV excitation

Highly emissive Eu³⁺:YVO₄ nanocrystals were successfully prepared by the hydrothermal method. The average diameter of grains was determined to be 15 nm. Transparent polymer nanocomposites composed of PMMA and well dispersed Eu³⁺:YVO₄ nanocrystals were fabricated by in situ polymerization. The nanocrystalline powders and nanocomposites were characterized by scanning and transmission electron microscopy (TEM) and X-ray diffraction (XRD). The luminescence properties of the obtained nanocomposites were investigated and compared with the starting powders and Eu³⁺:YVO₄ single crystal. The effect of the polymeric host on the luminescence properties of Eu³⁺:YVO₄ is presented and discussed.     

Effects of x and R3+ on the luminescent properties of Eu3+ in nanocrystalline YVxP1-xO4:Eu3+ and RVO4:Eu3+ thin-film phosphors

Using inorganic oxides and salts instead of alkoxides as the main starting materials, we prepared nanocrystalline YV_xP_1-xO₄:Eu³⁺ and RVO₄:Eu³⁺ (0x1; R=Y,La,Gd) thin-film phosphors by the Pechini sol–gel dip-coating process. The resulting films were characterized by X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), and photoluminescence excitation and emission spectra as well as luminescence decay. The results of XRD showed that a solid solution formed in the YV_xP_1-xO₄:Eu³⁺ film series from x=0 to x=1 with zircon structure. The same structure also held for the GdVO₄:Eu³⁺ film, but the LaVO₄:Eu³⁺ film crystallized with a different structure, monazite. AFM and SEM studies revealed that the phosphor films consisted of spherical particles ranging from 90 to 400 nm depending on the film compositions. With the increase of x values in YV_xP_1-xO₄:Eu³⁺ films, the integrated emission intensity and the red (⁵D₀–⁷F₂)-to-orange (⁵D₀–⁷F₁) intensity ratio of Eu³⁺ increase due to the increased energy-transfer probability from VO₄^3- to Eu³⁺ and the increased polarizability of the surrounding oxygen ions, respectively. The x values also have an influence on the decay behavior of Eu³⁺. The YVO₄:Eu³⁺ and GdVO₄:Eu³⁺ films showed very similar luminescence properties due to their same crystal structures. However, the LaVO₄:Eu³⁺ film exhibited a much different emission property from those of the YVO₄:Eu³⁺ and GdVO₄:Eu³⁺ films due to the structural effects. PACS 73.63.Bd; 78.55.Hx; 78.66.Nk; 81.15.Lm; 81.20.Fw     

Photoluminescence characteristics of ZnO doped with Eu powders

In this work, we have investigated the photoluminescence spectra of europium-doped zinc oxide crystallites prepared by a vibrating milled solid-state reaction method. X-ray diffraction, scanning electron microscopy, luminescence spectra and time-resolved spectra analysis were used to characterize the synthetic ZnO:Eu³⁺ powders. XRD results of the powders showed a typical wurtzite hexagonal crystal structure. A second phase occurred at 5 mol% Eu₂O₃-doped ZnO. The ⁵D₀-⁷F₁ (590 nm) and ⁵D₀-⁷F₂ (609 nm) emission characteristics of Eu³⁺ appeared after quenching with more than 1.5 mol% Eu₂O₃ doping. The Commission Internationale d’Eclairage (CIE) chromaticity coordinates of a ZnO:Eu³⁺ host excited at λ_ex=467 nm revealed a red-shift phenomenon with increase in Eu³⁺ ion doping. The lifetime of the Eu³⁺ ion decreased as the doping concentration was increased from 1.5 to 10 mol%, and the time-resolved ⁵D₀→⁷F₂ transition presents a single-exponential decay behavior.     

Synthesis and photoluminescent behavior of Eu3+-doped alkaline-earth tungstates

Eu³⁺-doped alkaline-earth tungstates MWO₄ (M=Ca²⁺, Sr²⁺, Ba²⁺) were prepared by a polymeric precursor method based on the Pechini process. The polymeric precursors were calcined at 700 °C for 2 h in order to obtain well-crystallized powders and then characterized by X-ray diffraction (XRD), thermogravimetric analysis (TG), scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy and photoluminescence spectroscopy (PL). All prepared samples showed a pure crystalline phase with scheelite-type structure confirmed by XRD. It was noted that the charge-transfer band shifted from 260 to 283 nm when calcium is replaced by strontium. However, this band was not observed for Eu³⁺-doped barium tungstate. Upon excitation at 260 nm, the emission spectra are dominated by the red ⁵D₀→⁷F₂ transition at 618 nm. By analyzing of the emission lines, it was inferred that Eu³⁺ ions occupy low symmetry sites in the host lattice. It was also found that Eu³⁺-doped SrWO₄ displays better chromaticity coordinates and greater luminescence intensity than the other samples.     

Optimization red emission of SrMoO4: Eu3+ via hydro-thermal co-precipitation synthesis using orthogonal experiment

In the present study, the SrMoO₄:Eu³⁺ phosphors has been synthesized through hydro-thermal co-precipitation method, and single factor and orthogonal experiment method was adopted to find optimal synthesis condition. It is interesting to note that hydro-thermal temperature is a prominent effect on the luminescent intensity of SrMoO₄:Eu³⁺ red phosphor, followed by co-precipitation temperature, calcining time, and the doping amount of Eu³⁺. The optimal synthesis conditions were obtained: hydro-thermal temperature is 145 °C, co-precipitation temperature is 35 °C, the calcining time is 2.5 h, and the doping amount of activator Eu³⁺ is 25%. Subsequently, the crystalline particle size, phase composition and morphology of the synthesized phosphors were evaluated by X-ray powder diffraction (XRD) and scanning electron microscopy (SEM). The results show that these phosphors possess a scheelite-type tetragonal structure, and the particle size is about 0.2 μm. Spectroscopic investigations of the synthesized phosphors are carried out with the help of photo-luminescence excitation and emission analysis. The studies reveal that SrMoO₄: Eu³⁺ phosphor efficiently convert radiation of 394 nm–592 and 616 nm for red light, and the luminescence intensity of SrMoO₄:Eu³⁺ phosphors is improved. SrMoO₄:Eu³⁺ phosphors may be a potential application for enhancing the efficiency of white LEDs.     

纳米晶Gd2O3 ∶ Eu3+的制备与发光性质

利用共沉淀法制备了纳米晶Gd₂O₃ : Eu³⁺发光粉体。 在不同掺杂浓度、不同煅烧温度的系列样品中,均观测到Eu³⁺离子的特征发射。样品的晶相与发射性质的研究表明:所制备的样品经800~1 300 ℃热处理后,晶相为立方相,1 400 ℃时开始向单斜相转变。荧光强度与Eu³⁺离子掺杂浓度关系研究表明:在不同掺杂浓度中,Eu³⁺离子浓度为4%时其相对发射强度最强。在三个不同的煅烧温度中,经800 ℃煅烧的样品其发光效果最好。此外还观察到电荷转移激发态以及基质、Gd³⁺与Eu³⁺之间的能量传递。激发谱包含三部分,即电荷转移带、Eu³⁺的4f内壳层电子跃迁和Gd³⁺的激发谱。     

The photoluminescence,afterglow and up conversion photostimulated luminescence of Eu3+ doped Mg2SnO4 phosphors

The Mg₂SnO₄:Eu³⁺ phosphor with reddish photoluminescence, green afterglow and photostimulated luminescence is obtained by the solid state method. The host related afterglow is greatly enhanced by doping of Eu³⁺ and it can last nearly 6 h when the Eu³⁺ concentration is 1 mol%. The photostimulated luminescence is found to be weakened by doping of Eu³⁺. It was revealed that all the shallow traps and a part of the deep traps are involved in afterglow. The majority of deep traps are responsible for photostimulated luminescence. The impact of doping Eu³⁺ on the afterglow and photostimulated luminescence is investigated and we propose a feasible interpretation.     

Solvothermal synthesis and luminescence properties of the novel aluminum garnet phosphors for WLED applications

The color rendering index (CRI) and structural stability of cerium doped yttrium aluminum garnet (YAG:Ce) based phosphors have been enhanced by replacing Y³⁺ ions by larger radius ions (Tb³⁺, Gd³⁺, Eu³⁺, and Sm³⁺) at the dodecahedral site and replacing Al³⁺ ions by larger ones (Ga³⁺, Y³⁺, Tb³⁺, Gd³⁺, and Sm³⁺) at the octahedral site. These aluminum garnet crystalline powders were prepared by solvothermal reaction method at 300 °C for 48 h. The lattice constant values of synthetic aluminum garnet crystalline powders are larger than that of YAG and the emission wavelength of Ce³⁺ ion of these samples is longer than that of YAG:Ce. FESEM and TEM studies revealed that the Ln₃Ga₂Al₃O₁₂ and Ln₃Al₂Al₃O₁₂ crystalline powders have 3-dimensional star-like morphology with submicron size and good crystallinity, while, Ln₃(LnAl)Al₃O₁₂ garnet crystalline powders were cubic crystalline phases and shaped as cubes with the round edge having an approximate diameter of about 200–400 nm. All the prepared powders were grown along (100) direction and crystallized into single crystal. Also, the effects of treatment time and reaction temperature on the structure of aluminum garnet crystalline powders have been investigated.     

Eu-doped glass materials for red luminescence

Red luminescence (at wavelength about 622 nm) from Eu³⁺ ions embedded in PbO–Bi₂O₃–Ga₂O₃–BaO glass hosts is reported for room and liquid helium temperatures. The substantial influence of energy transfer processes between the host and Eu³⁺ ions is shown experimentally through the dependences of photoluminescence on light polarization and excitation wavelength. Only polarized, excited pulsed XeII laser light (λ=714 nm) gives substantial luminescence with efficiency up to 14.3%. The role of phonon-relaxation subsystem in the observed luminescence is discussed.     

Optical and structural properties of Eu-diffused and doped ZnO nanowires

Single crystal ZnO nanowires diffused with europium (Eu) from a solid source at 900 °C for 1 h or doped with Eu during growth have been characterized. The ZnO nanowires were grown by chemical vapor deposition on Si substrates employing Au as a catalyst. The diameter of the resulting nanowires was 200 nm with a length of 1 μm. Photoluminescence spectra excited by a He–Cd laser at room temperature showed the green luminescence at 515 nm in Eu-diffused nanowires. A small red shift of near-band-edge emission of ZnO nanowires was observed in the diffused wires, but sharp emission from Eu³ ions was not present. Transmission electron microscopy shows crystalline Eu₂O₃ formation on the diffused nanowire surface, which forms a coaxial heterostructure system. When Eu was incorporated during the nanowire growth, the sharp ⁵D_O–⁷F₂ transition of the Eu³⁺ ion at around 615 nm was observed.     

Influence of Eu doping content on photoluminescence of Gd2O3:Eu phosphors prepared by liquid-phase reaction method

Europium-doped cubic Gd₂O₃:Eu³⁺ nanoparticles containing various activator content in the range of 5-15 wt% were synthesized by a liquid-phase reaction method to investigate the influence of Eu³⁺ loading on the optical properties of phosphors by using XRD, TEM, BET, spectrometer and fluorometer. The size of Gd₂O₃:Eu³⁺ powders was in the range 21-41 nm. The phosphors showed an initial increase in luminescence and then a subsequent decrease with further doping (above 10 wt%). The decay time was reduced with increasing Eu loading; however, it decreased significantly above the 10% Eu doping. From spectroscopic studies, the Eu³⁺ doping ion distribution was uniform and homogeneous up to the 10 wt% loading because no concentration quenching effect was observed. However, further Eu³⁺ doping above 10 wt% reduced the luminescence due to the concentration quenching effect, as deduced from the shortening of the decay time.     

Preparation and characterization of nanosized (Y,Bi)VO4:Eu and Y(V,P)O4:Eu red phosphors

Nanosized luminescent (Y,Bi)VO₄:Eu³⁺ and Y(V,P)O₄:Eu³⁺ were synthesized at low temperatures either by a coprecipitation method or by a hydrothermal method from aqueous solutions. The effect of Bi³⁺ ion or P⁵⁺ ion content in the lattice, annealing temperature effects on the crystal structure and the particle size, and the luminescence property of (Y,Bi)VO₄:Eu³⁺ and Y(V,P)O₄:Eu³⁺ nanoparticles were examined with a field-enhanced scanning electron microscopy, XRD, and a spectrofluorometer. The pristine YVO₄:Eu³⁺, (Y,Bi)VO₄:Eu³⁺, or Y(V,P)O₄:Eu³⁺ nanoparticles are 35-50 nm in size. The luminescence spectrum of the Eu³⁺ ion was used to probe its position in the crystal lattice. The dopant ions enter the same lattice sites in the nanocrystalline as in the corresponding bulk material, resulting similar spectral features between them. Photoluminescence intensity is weak for the pristine nanoparticles. Annealing the nanoparticles at temperatures up to 1000 °C results in the increased luminescence intensity (>80% of micrometer-sized phosphors) with the minimal particle growth and the improved particle crystallinity.