Micelle formation by N-alkyl-N-methylpyrrolidinium bromide in aqueous solution

The micellization of the ionic liquid N-alkyl-N-methylpyrrolidinium bromide (C(n)MPB, n = 12, 14 and 16) in aqueous solutions was investigated by surface tension measurements, electrical conductivity and static luminescence quenching. The effectiveness of the surface tension reduction (Π(cmc)), maximum surface excess concentration (Γ(max)) and the minimum area (A(min)) occupied per surfactant molecule at the air/water interface can be obtained from the surface tension measurements at 25 °C. The critical micelle concentration (cmc) at different temperatures and a series of thermodynamic parameters (ΔG, ΔH and ΔS) of micellization were evaluated from electrical conductivity measurements in the temperature range of 25-45 °C. The thermodynamic parameters show that the micelle formation is entropy-driven at low temperature and enthalpy-driven at high temperature. Furthermore, the micelle aggregation number (N(agg)) of C(n)MPB was calculated according to the Turro-Yekta method through static luminescence quenching and found that N(agg) (49, 55, and 59) increased with the hydrophobic chain length of C(n)MPB.     

升华热量热计的建立和有机氯化物的蒸发热和升华热的测定

本文参照Wads设计的蒸发热量热计建立一升华热量热计。利用此升华热量热计和LKB8700蒸发热量热计, 测得如下化合物在298.15 K 时的蒸发焓和升华焓为: 化合物 升华焓(kJ mol~(-1)) 蒸发焓(kJmol~(-1))水 43.72±0.18正癸烷 51.21±0.25萘 73.26±0.921,2,3-三氯苯 75.14±0.751,2,4-三氯苯 55.06±0.501,3,5-三氯苯 72.68±0.50     

Interaction of human serum albumin with bendroflumethiazide studied by fluorescence spectroscopy

The interactions between bendroflumethiazide (BFTZ) and human serum albumin (HSA) have been studied by fluorescence spectroscopy. Binding constants for drug attachment to the various binding sites of HSA have been measured at different temperatures in physiological buffer solution. The effect of metal ions on BFTZ interaction with HSA was also investigated. The thermodynamic parameters, DeltaH and DeltaS, have been calculated to be 49.28kJmol(-1)>0, and 258.83Jmol(-1)K(-1)>0, respectively. The distance between HSA and BFTZ, r, was determined to be 1.47nm based on F?rster's non-radiative energy transfer theory. The experimental results reveal that BFTZ has a strong ability to quench the intrinsic fluorescence of HSA through a static quenching mechanism. Furthermore, the binding constants between BFTZ and HSA are remarkably independent of temperature, and decrease in the presence of various ions, usually by about 30-55%. Hydrophobic interaction occurs between BFTZ and the sub-domain II A of HSA.     

Characteristics of aggregation in aqueous solutions of dialkylpyrrolidinium bromides

Three pyrrolidinium-based ionic liquids-N-dodecyl-N-methylpyrrolidinium bromide, N-butyl-N-octylpyrrolidinium bromide, and N-butyl-N-dodecylpyrrolodinium bromide-were synthesized and characterized by their decomposition temperatures (T(d)) measured by thermogravimetric analysis, and by their melting point (T(m)), glass transition (T(g)) and crystallization temperatures (T(cryst)) determined by differential scanning calorimetry. Their self-aggregation properties in aqueous solution were studied and their behavior is compared with that of analogous conventional cationic surfactants, namely tetra-alkylammonium bromide salts. The critical micellar concentration, cmcs were obtained by isothermal titration calorimetry (ITC); which were further validated by measurements of interfacial tension, fluorescence and NMR spectroscopy. Enthalpies of micellization were measured at three different temperatures using ITC. The Taylor dispersion method and DOSY NMR were used to determine diffusion coefficients of the ionic liquid surfactants in aqueous solution at 298.15K. Several correlations between structural features of the surfactant species, such as the number and size of their alkyl chains, and the thermodynamic quantities of micellization-expressed by experimental values of cmc, counter-ion binding fraction, Δ(mic)G°, Δ(mic)°, and Δ(mic)S°-are established. We could interpret the different contributions of the two alkyl side chains to the aggregation properties in terms of the balance of interactions in homogeneous and micellar phases, contributing to understanding the aggregation behavior of ionic liquids in water and the parallel between these systems and traditional ionic surfactants.     

Dihydrogen binding to isostructural s = (1)/(2) and s = 0 cobalt complexes

Two isostructural, nonclassical Co(H(2)) complexes are prepared from their Co(N(2)) precursors using tris(phosphino)silyl and tris(phosphino)borane ancillary ligands. Comproportionation of CoBr(2) and Co metal in the presence of TPB (tris-(o-diisopropylphophinophenyl)borane) gives (TPB)CoBr (4). One-electron reduction of 4 triggers N(2) binding to give (TPB)Co(N(2)) (2-N(2)) which is isostructural to previously reported [SiP(3)]Co(N(2)) (1-N(2)) ([SiP(3)] = tris-(o-diisopropylphosphinophenyl)silyl). Both 1-N(2) and 2-N(2) react with 1 atm H(2) to generate thermally stable H(2) complexes 1-H(2) and 2-H(2), respectively. Both complexes are characterized by a suite of spectroscopic techniques in solution and by X-ray crystallography. The H(2) and N(2) ligands in 2-H(2) and 2-N(2) are labile under ambient conditions and the binding equilibria are observable by temperature-dependent UV/vis. A van't Hoff analysis allows for the ligand binding energetics to be determined (H(2): ΔH(o) = -12.5(3) kcal mol(-1) and ΔS(o) = -26(3) cal K(-1) mol(-1); N(2): ΔH(o) = -13.9(7) kcal mol(-1) and ΔS(o) = -32(5) cal K(-1) mol(-1)).     

Miscibility behavior of dipalmitoylphosphatidylcholine with a single-chain partially fluorinated amphiphile in Langmuir monolayers

Surface pressure-area, surface potential-area, and dipole moment-area isotherms were obtained for monolayers made from a partially fluorinated surfactant, (perfluorooctyl)undecyldimorpholinophosphate (F8H11DMP), dipalmitoylphosphatidylcholine (DPPC), and their combinations. Monolayers, spread on a 0.15 M NaCl subphase, were investigated at the air/water interface by the Wilhelmy method, ionizing electrode method, and fluorescence microscopy. Surface potentials were analyzed using the three-layer model proposed by Demchak and Fort. The contribution of the dimorpholinophosphate polar head group of F8H11DMP to the vertical component of the dipole moment was estimated to be 4.99 D. The linear variation of the phase transition pressure as a function of F8H11DMP molar fraction (X(F8H11DMP)) demonstrated that DPPC and F8H11DMP are miscible in the monolayer. This result was confirmed by deviations from the additivity rule observed when plotting the molecular areas and the surface potentials as a function of X(F8H11DMP) over the whole range of surface pressures investigated. Assuming a regular surface mixture, the Joos equation, which was used for the analysis of the collapse pressure of mixed monolayers, allowed calculation of the interaction parameter (xi=-1.3) and the energy of interaction (Delta epsilon =537 Jmol(-1)) between DPPC and F8H11DMP. The miscibility of DPPC and F8H11DMP within the monolayer was also supported by fluorescence microscopy. Examination of the observed flower-like patterns showed that F8H11DMP favors dissolution of the ordered LC phase domains of DPPC, a feature that may be key to the use of phospholipid preparations as lung surfactants.     

Effect of 1-Pentanol on the Thermodynamics of the Micellization of Hexadecyltrimethylammonium Bromide in Aqueous Solutions

Russian Journal of Physical Chemistry A - The thermodynamic parameters (ΔH, ΔG, and ΔS) of the micellization of hexadecyltrimethylammonium bromide (CTAB) in aqueous solutions of...     

Mechanistic investigation on binding interaction of bioactive imidazole with protein bovine serum albumin--a biophysical study

The interaction between bioactive imidazole derivative (PPP) and bovine serum albumin (BSA) was investigated using fluorescence and UV-vis spectral studies. The experimental results showed that the fluorescence quenching of BSA by imidazole derivative was the result of the formation of BSA-PPP complex and the effective quenching constants (K(SV)) were 2.66×10(4), 2.56×10(4), and 2.10×10(4) at 301, 310 and 318 K, respectively. Static quenching and non-radiative energy transfer were confirmed to the result in the fluorescence quenching. The binding site number n, apparent binding constant K(A) and corresponding thermodynamic parameters (ΔG, ΔH and ΔS) were measured at different temperatures. The process of binding of PPP molecule on BSA was a spontaneous molecular interaction procedure in which entropy increased and Gibbs free energy decreased.     

Interaction of monosulfonate tetraphenyl porphyrin (H2TPPS1) with plant-esterase: determination of the binding mechanism by spectroscopic methods

The interaction of monosulfonate tetraphenyl porphyrin (H(2)TPPS(1)) with plant-esterase was investigated using fluorescence and UV-vis absorption spectroscopy. Fluorescence quenching, from which the binding parameters were evaluated, revealed that the quenching of the esterase by H(2)TPPS(1) resulted from the formation of a dye-esterase complex. According to the modified Stern-Volmer equation, the effective quenching constants (K(a)) between H(2)TPPS(1) and plant-esterase at four different temperatures (297 K, 300 K, 303 K, and 306 K) were obtained to be 14.132×10(5), 5.734×10(5), 2.907×10(5), and 2.291×10(5) M(-1), respectively. The thermodynamic parameters, enthalpy change (ΔH) and entropy change (ΔS) for the reaction were calculated to be -181.67 kJ M(-1) and -0.49 kJ M(-1)K(-1), indicating that van der Waals force and hydrogen bonds were the dominant intermolecular force in stabilizing the complex. Site marker competitive experiments showed that the binding of H(2)TPPS(1) to plant-esterase primarily took place in the active site. The binding distance (r) was obtained to be 5.99 nm according to F?rster theory of non-radioactive energy transfer. The conformation of plant-esterase was investigated by synchronous fluorescence and UV-vis absorption spectroscopy, and the results confirmed some micro-environmental and conformational changes of plant-esterase molecules.     

Spectroscopic studies on the interaction between human hemoglobin and CdS quantum dots

The interaction between human adult hemoglobin (Hb) and bare CdS quantum dots (QDs) was investigated by fluorescence, synchronous fluorescence, circular dichroism (CD), and Raman spectroscopic techniques under physiological pH 7.43. The intrinsic fluorescence of Hb is statically quenched by CdS QDs. The quenching obeys the Stern-Volmer equation, with an order of magnitude of binding constant (K) of 10(7). The electrostatic adsorption of Hb on the cationic CdS QDs surface is energetically favorable (DeltaS(0)=70.22 Jmol(-1)K(-1), DeltaH(0)=-23.11 kJmol(-1)). The red shift of synchronous fluorescence spectra revealed that the microenvironments of tryptophan and tyrosine residues at the alpha(1)beta(2) interface of Hb are disturbed by CdS QDs, which are induced from hydrophobic cavities to a more exposed or hydrophilic surrounding. The secondary structure of the adsorbed Hb has a loose or extended conformation for which the content of alpha-helix has decreased from 72.5 to 60.8%. Moreover, Raman spectra results indicated that the sulfur atoms of the cysteine residues form direct chemical bonds on the surface of the CdS QDs. The binding does not significantly affect the spin state of the heme iron, and deoxidation is not expected to take place on the coated oxyhemoglobin. The change of orientation of heme vinyl groups was also detected.     

Thermal decomposition mechanism of 1-ethyl-3-methylimidazolium bromide ionic liquid

In order to better understand the volatilization process for ionic liquids, the vapor evolved from heating the ionic liquid 1-ethyl-3-methylimidazolium bromide (EMIM(+)Br(-)) was analyzed via tunable vacuum ultraviolet photoionization time-of-flight mass spectrometry (VUV-PI-TOFMS) and thermogravimetric analysis mass spectrometry (TGA-MS). For this ionic liquid, the experimental results indicate that vaporization takes place via the evolution of alkyl bromides and alkylimidazoles, presumably through alkyl abstraction via an S(N)2 type mechanism, and that vaporization of intact ion pairs or the formation of carbenes is negligible. Activation enthalpies for the formation of the methyl and ethyl bromides were evaluated experimentally, ΔH(?)(CH(3)Br) = 116.1 ± 6.6 kJ/mol and ΔH(?)(CH(3)CH(2)Br) = 122.9 ± 7.2 kJ/mol, and the results are found to be in agreement with calculated values for the S(N)2 reactions. Comparisons of product photoionization efficiency (PIE) curves with literature data are in good agreement, and ab initio thermodynamics calculations are presented as further evidence for the proposed thermal decomposition mechanism. Estimates for the enthalpy of vaporization of EMIM(+)Br(-) and, by comparison, 1-butyl-3-methylimidazolium bromide (BMIM(+)Br(-)) from molecular dynamics calculations and their gas phase enthalpies of formation obtained by G4 calculations yield estimates for the ionic liquids' enthalpies of formation in the liquid phase: ΔH(vap)(298 K) (EMIM(+)Br(-)) = 168 ± 20 kJ/mol, ΔH(f,?gas)(298 K) (EMIM(+)Br(-)) = 38.4 ± 10 kJ/mol, ΔH(f,?liq)(298 K) (EMIM(+)Br(-)) = -130 ± 22 kJ/mol, ΔH(f,?gas)(298 K) (BMIM(+)Br(-)) = -5.6 ± 10 kJ/mol, and ΔH(f,?liq)(298 K) (BMIM(+)Br(-)) = -180 ± 20 kJ/mol.     

Thermodynamic investigations of methyl tert-butyl ether and water mixtures

Interactions between methyl tert-butyl ether (MTBE) and water have been investigated by scanning calorimetry, isothermal titration calorimetry, densitometry, IR-spectroscopy, and gas chromatography. The solubilization of MTBE in water at 25 °C at infinite dilution has ΔH° = -17.0 ± 0.6 kJ mol(-1); ΔS° = -80 ± 2 J mol(-1) K(-1); ΔC(p) = +332 ± 15 J mol(-1) K(-1); ΔV° = -18 ± 2 cm(3) mol(-1). The signs of these thermodynamic functions are consistent with hydrophobic interactions. The occurrence of hydrophobic interaction is further substantiated as IR absorption spectra of MTBE-water mixtures show that MTBE strengthens the hydrogen bond network of water. Solubilization of MTBE in water is exothermic whereas solubilization of water in MTBE is endothermic with ΔH° = +5.3 ± 0.6 kJ mol(-1). The negative mixing volume is explained by a large negative contribution due to size differences between water and MTBE and by a positive contribution due to changes in the water structure around MTBE. Henry's law constants, K(H), were determined from vapor pressure measurements of mixtures equilibrated at different temperatures. A van't Hoff analysis of K(H) gave ΔH(H)° = 50 ± 1 kJ mol(-1) and ΔS(H)° = 166 ± 5 J mol(-1) K(-1) for the solution to gas transfer. MTBE is excluded from the ice phase water upon freezing MTBE-water mixtures.     

Interaction of cinnamic acid derivatives with serum albumins: a fluorescence spectroscopic study

Cinnamic acid (CA) derivatives are known to possess broad therapeutic applications including anti-tumor activity. The present study was designed to determine the underlying mechanism and thermodynamic parameters for the binding of two CA based intramolecular charge transfer (ICT) fluorescent probes, namely, 4-(dimethylamino) cinnamic acid (DMACA) and trans-ethyl p-(dimethylamino) cinnamate (EDAC), with albumins by fluorescence spectroscopy. Stern-Volmer analysis of the tryptophan fluorescence quenching data in presence of the added ligand reveals fluorescence quenching constant (κ(q)), Stern-Volmer constant (K(SV)) and also the ligand-protein association constant (K(a)). The thermodynamic parameters like enthalpy (ΔH) and entropy (ΔS) change corresponding to the ligand binding process were also estimated. The results show that the ligands bind into the sub-domain IIA of the proteins in 1:1 stoichiometry with an apparent binding constant value in the range of 10(4) dm(3) mol(-1). In both the cases, the spontaneous ligand binding to the proteins occur through entropy driven mechanism, although the interaction of DMACA is relatively stronger in comparison with EDAC. The temperature dependence of the binding constant indicates the induced change in protein secondary structure.     

Reversible O-ylide formation in carbene/ether reactions

p-Nitrophenylchlorocarbene reacted reversibly with diethyl ether, di-n-propyl ether, or tetrahydrofuran (THF) to form O-ylides, which were visualized by their UV-visible spectroscopic signatures. Equilibrium constants (K(eq)) were determined spectroscopically and ranged from 0.10 M(-1) (di-n-propyl ether) to 7.5 M(-1) (THF) at 295 K. Studies of K(eq) as a function of temperature afforded ΔH(o), ΔS(o), and ΔG(o) for the di-n-propyl ether and THF/O-ylide equilibria. ΔH(o) was favorable for ylide formation, but ΔS(o) was quite negative, so that ΔG(o)s for the equilibria were small. Electronic structure calculations based on density functional theory provided structures, spectroscopic signatures, and energetics for the carbene/ether O-ylides.     

Synthesis and characterization of polymer eight-coordinate (enH2)[YIII(pdta)(H2O)](2)·10H2O as well as the interaction of [YIII(pdta)(H2O)]2(2-) with BSA

The eight-coordinate (enH2)[YIII(pdta)(H2O)](2)·10H2O (en=ethylenediamine and H4pdta=1,3-propylenediamine-N,N,N',N'-tetraacetic acid) was synthesized, meanwhile its molecular and crystal structures were determined by single-crystal X-ray diffraction technology. The interaction between [Y(III)(pdta)(H2O)]2(2-) and bovine serum albumin (BSA) was investigated by UV-vis and fluorescence spectra. The results indicate that [YIII(pdta)(H2O)]2(2-) quenched effectively the intrinsic fluorescence of BSA via a static quenching process with the binding constant (Ka) of the order of 10(4). Meanwhile, the binding and damaging sites to BSA molecules were also estimated by synchronous fluorescence. Results indicate that the hydrophobic environments around Trp and Tyr residues were all slightly changed. The thermodynamic parameters (ΔG=-25.20 kJ mol(-1), ΔH=-26.57 kJ mol(-1) and ΔS=-4.58 J mol(-1) K(-1)) showed that the reaction was spontaneous and exothermic. What is more, both ΔH and ΔS were negative values indicated that hydrogen bond and Van der Waals forces were the predominant intermolecular forces between [YIII(pdta)(H2O)]2(2-) and BSA.     

Interaction of 1-methyl-1-({2-[4-(trifluoromethyl)phenyl]-1,3-thiazol-4-yl}methyl) piperidinium chloride with β-CD: spectroscopic,calorimetric and molecular modeling approaches

Spectroscopic investigation supported by molecular modeling methods has been used to describe the inclusion complex of β-cyclodextrin (β-CD) with 1-Methyl-1-({2-[4-(trifluoromethyl)phenyl]-1,3-thiazol-4-yl}methyl) piperidinium chloride (1MPTMPC) in solution and in solid state. The formation of inclusion complex between the β-CD and the 1MPTMPC has been investigated both in solution and in the solid state. Solution-state complexation between the 1MPTMPC and β-CD was established using ¹H NMR spectroscopy and isothermal titration calorimetry (ITC). From the ¹H NMR spectroscopic studies, 1:1 complex stoichiometry was deduced with an association constant (K) of 925 M^?1. Using an independent binding model, the ITC technique provides a K value of the same order with the one determined by NMR and the thermodynamic parameters ΔH, ΔS and ΔG which reveals driving forces involved during complex formation. The formation of the solid inclusion compound was confirmed by X-ray powder diffraction and differential scanning calorimetry. The most probable conformation of the inclusion complex obtained through a molecular docking investigation corroborates well to ROESY experiment.     

Micelle formation of Tyr-Phe dipeptide and Val-Tyr-Val tripeptide in aqueous solution and their influence on the aggregation of SDS and PEO-PPO-PEO copolymer micelles

The aggregation properties of Tyr-Phe dipeptide and Val-Tyr-Val tripeptide were studied in aqueous solution and in the presence of SDS and SDS-polymer environments using UV-visible, surface tension, fluorescence and circular dichroism (CD) techniques. Both the peptides formed micelles. The cmc values obtained for dipeptide and tripeptide are 2×10(-5) and 4×10(-5) M, respectively in aqueous solution at 25°C. The presence of additives (SDS and polymer) hindered the micelle formation of peptides. The cmc values obtained by various methods are in good agreement with each other. Effect of peptides on the aggregation properties of SDS also was investigated. The cmc of SDS was decreased in presence of peptides and were reduced with increase in temperature. Using monophasic micellization concept, the association constant (K(A)) for the SDS-peptide mixed micellar systems was determined. Using biphasic model, the thermodynamic parameters viz; ΔG°(m), ΔH°(m) and ΔS°(m) for SDS-water and SDS-peptide-water mixed micellar systems, the standard free energy for transfer of SDS from aqueous to peptide additive environments were estimated at various temperatures. These results suggest that the SDS is more stable in micellized form in the SDS-water-peptide ternary systems compared to the situation in the corresponding SDS-water binary systems.     

Tuning the reactivity in classic low-spin d6 rhenium(I) tricarbonyl radiopharmaceutical synthon by selective bidentate ligand variation (L,L'-Bid; L,L'= N,N', N,O, and O,O' donor atom sets) in fac-[Re(CO)3(L,L'-Bid)(MeOH)]n complexes

A range of fac-[Re(CO)(3)(L,L'-Bid)(H(2)O)](n) (L,L'-Bid = neutral or monoanionic bidentate ligands with varied L,L' donor atoms, N,N', N,O, or O,O': 1,10-phenanthroline, 2,2'-bipydine, 2-picolinate, 2-quinolinate, 2,4-dipicolinate, 2,4-diquinolinate, tribromotropolonate, and hydroxyflavonate; n = 0, +1) has been synthesized and the aqua/methanol substitution has been investigated. The complexes were characterized by UV-vis, IR and NMR spectroscopy and X-ray crystallographic studies of the compounds fac-[Re(CO)(3)(Phen)(H(2)O)]NO(3)·0.5Phen, fac-[Re(CO)(3)(2,4-dQuinH)(H(2)O)]·H(2)O, fac-[Re(CO)(3)(2,4-dQuinH)Py]Py, and fac-[Re(CO)(3)(Flav)(CH(3)OH)]·CH(3)OH are reported. A four order-of-magnitude of activation for the methanol substitution is induced as manifested by the second order rate constants with (N,N'-Bid) < (N,O-Bid) < (O,O'-Bid). Forward and reverse rate and stability constants from slow and stopped-flow UV/vis measurements (k(1), M(-1) s(-1); k(-1), s(-1); K(1), M(-1)) for bromide anions as entering nucleophile are as follows: fac-[Re(CO)(3)(Phen)(MeOH)](+) (50 ± 3) × 10(-3), (5.9 ± 0.3) × 10(-4), 84 ± 7; fac-[Re(CO)(3)(2,4-dPicoH)(MeOH)] (15.7 ± 0.2) × 10(-3), (6.3 ± 0.8) × 10(-4), 25 ± 3; fac-[Re(CO)(3)(TropBr(3))(MeOH)] (7.06 ± 0.04) × 10(-2), (4 ± 1) × 10(-3), 18 ± 4; fac-[Re(CO)(3)(Flav)(MeOH)] 7.2 ± 0.3, 3.17 ± 0.09, 2.5 ± 2. Activation parameters (ΔH(k1)(++), kJmol(-1); ΔS(k1)(), J K(-1) mol(-1)) from Eyring plots for entering nucleophiles as indicated are as follows: fac-[Re(CO)(3)(Phen)(MeOH)](+) iodide 70 ± 1, -35 ± 3; fac-[Re(CO)(3)(2,4-dPico)(MeOH)] bromide 80.8 ± 6, -8 ± 2; fac-[Re(CO)(3)(Flav)(MeOH)] bromide 52 ± 5, -52 ± 15. A dissociative interchange mechanism is proposed.     

Study of the interaction between N-confused porphyrin and bovine serum albumin by fluorescence spectroscopy

The fluorescence and ultraviolet spectroscopy were explored to study the interaction between N-confused porphyrins (NCP) and bovine serum albumin (BSA) under imitated physiological condition. The experimental results indicated that the fluorescence quenching mechanism between BSA and NCP was static quenching procedure at low NCP concentration at 293 and 305 K or a combined quenching (static and dynamic) procedure at higher NCP concentration at 305 K. The binding constants, binding sites and the corresponding thermodynamic parameters ΔH, ΔS, and ΔG were calculated at different temperatures. The comparison of binding potency of the three NCP to BSA showed that the substituting groups in benzene ring could enhance the binding affinity. From the thermodynamic parameters, we concluded that the action force was mainly hydrophobic interaction. The binding distances between NCP and BSA were calculated using F?rster non-radiation energy transfer theory. In addition, the effect of NCP on the conformation of BSA was analyzed using synchronous fluorescence spectroscopy.     

Study of valsartan interaction with micelles as a model system for biomembranes

In this study, the interaction of valsartan (VAL), an angiotensin II receptor antagonist, with cationic surfactant cetyltrimethylammonium bromide (CTAB) was investigated. The effect of cationic micelles on spectroscopic and acid-base properties of VAL was carried out using UV spectrophotometry at physiological conditions (pH 7.4). The binding of VAL to CTAB micelles implied a shift in drug acidity constant (pK(a)(water)-pK(a)(micelle)=1.69) proving the great affinity of VAL dianion for the positively charged CTAB micelle surface. To quantify the degree of VAL/CTAB interaction, two constants were calculated by using mathematical models: micelle/water partition coefficient (K(x)) and drug/micelle binding constant (K(b)). The decrease of K(x) with VAL concentration, obtained by using pseudo-phase model, is consistent with an adsorption-like phenomenon. From the dependence of differential absorbance at lambda=295 nm on CTAB concentration, by using mathematical model that treats the solubilization of VAL dianion as its binding to specific sites in the micelles (Langmuir adsorption isotherm), the binding constant (K(b)=(2.50+/-0.49)x10(4)M(-1)) was obtained. Binding constant VAL/CTAB was also calculated using micellar liquid chromatography (MLC).