An ion-imprinted silica-supported organic-inorganic hybrid sorbent prepared by a surface imprinting technique combined with a polysaccharide incorporated sol-gel process for selective separation of cadmium(II) from aqueous solution

Ion-imprinting concept and polysaccharide incorporated sol-gel process were applied to the preparation of a new silica-supported organic-inorganic hybrid sorbent for selective separation of Cd(II) from aqueous solution. In the prepared shell/core composite sorbent, covalently surface coating on the supporting silica gel was achieved by using a Cd(II)-imprinting sol-gel process starting from an inorganic precursor, γ-glycidoxypropyltrimethoxysiloxane (GPTMS), and a functional biopolymer, chitosan (CS). The sorbent was prepared through self-hydrolysis of GPTMS, self-condensation and co-condensation of silanol groups (Si-OH) from siloxane and silica gel surface, in combination with in situ covalent cross-linking of CS with partial amine shielded by Cd(II) complexation. Extraction of the imprinting molecules left a predetermined arrangement of ligands and tailored binding pockets for Cd(II). The prepared sorbent was characterized by using X-ray energy dispersion spectroscopy (EDX), X-ray diffraction (XRD), and scanning electron microscopy (SEM). Batch experiments were conducted to study the sorption performance by removal of Cd(II) when present singly or in binary system, an aqueous Cd(II) and Zn(II) mixture. The ion-imprinted composite sorbent offered a fast kinetics for the sorption of Cd(II) and the maximum capacity was 1.14 mmol g⁻¹. The uptake capacity of the imprinted sorbent and the selectivity coefficient were much higher than that of the non-imprinted sorbent. The imprinted sorbent exhibited high reusability. The prepared functional sorbent was shown to be promising for the preconcentration of cadmium in environmental and biological samples.     

Novel nylon-supported organic-inorganic hybrid membrane with hierarchical pores as a potential immobilized metal affinity adsorbent

Chitosan-based porous organic-inorganic hybrid membranes supported by microfiltration nylon membranes were prepared, in which gamma-glycidoxypropyltrimethoxysilane (GPTMS) was used as an inorganic source as well as crosslinking reagent. Polyethylene glycol (PEG) with different molecular weight and content was used as imprinting molecule for morphology control. In situ crosslinking of chitosan and simultaneous polymerization of GPTMS in PEG template environment endowed the hybrid membrane with specific characteristics. Distinct hybrid effect between chitosan (CS) and GPTMS was revealed by shifting in X-ray diffraction (XRD) pattern, decomposition in simultaneous thermogravimetry and differential scanning calorimetry (TG/DSC) testing. As manifested by scanning electron microscopy (SEM), the molecular weight and content of PEG had remarkable effect on the resulting surface morphology of the hybrid membrane and a given surface morphology could be obtained by extracting of the imprinted PEG molecular. Among three types of porogen used: PEG 400, PEG 4000 and PEG 20000, only PEG 20000 could result in a porous surface. Moreover, a special porous surface with three-dimensional (3D) hierarchical structure-in-structure pore fashion was obtained when content of PEG 20000 was controlled at 15%. Experimental results also showed that the hybrid membrane had low swelling ratio and high stability in acidic solution. After conveniently coordinated with copper ions, the porous metal chelating hybrid membrane could effectively adsorb the model protein, bovine serum albumin (BSA). As expected, the hybrid membrane imprinted with 15% PEG 20000 had remarkably high copper ion binding and BSA adsorption capacity, which might result from the large surface area, high ligand density and suitable interconnected 3D hierarchical porous surface.     

Direct chromatographic capture of enzyme from crude homogenate using immobilized metal affinity chromatography on a continuous supermacroporous adsorbent

A continuous supermacroporous matrix has been developed allowing direct capture of enzyme from non-clarified crude cell homogenate at high flow-rates. The continuous supermacroporous matrix has been produced by radical co-polymerization of acrylamide, allyl glycidyl ether and N,N'-methylene-bis(acrylamide) which proceeds in aqueous solution of monomers frozen inside a column (cryo-polymerization). After thawing, the column contains a continuous matrix having interconnected pores of 10-100 microm size. Iminodiacetic acid covalently coupled to the cryogel is a rendering possibility for immobilized metal affinity chromatographic purification of recombinant His-tagged lactate dehydrogenase, (His)6-LDH, originating from thermophilic bacterium Bacillus stearothermophilus, but expressed in Escherichia coli. The large pore size of the adsorbent makes it possible to process particulate-containing material without blocking the column. No preliminary filtration or centrifugation is needed before application of crude extract on the supermacroporous column. A total of 210 ml crude homogenate, 75 ml of it non-clarified, was processed on a single 5.0 ml supermacroporous column at flow speeds up to 12.5 ml/min without noticeable impairment of the column properties. Mechanically the cryogel adsorbent is very stable. The continuous matrix could easily be removed from the column, dried at 70 degrees C and kept in a dry state. After rehydration and reinsertion of the matrix into an empty column, (His)6-LDH was purified as efficiently as on the newly prepared column. The procedure of manufacturing the supermacroporous continuous cryogel is technically simple. Starting materials and initiators are cheap and available and are simply mixed and frozen under specified conditions. Altogether these qualities reveal that the supermacroporous continuous cryogels is a very interesting alternative to existing methods of protein purification from particulate-containing crude extracts.     

基于天冬氨酸的固定化金属离子亲和色谱材料用于磷酸化肽选择性富集

采用点击化学的方法将自然界中的天冬氨酸(aspartic acid)键合到硅球上(命名为Click Asp),并将Fe3+配位到Click Asp上,合成固定金属离子亲和色谱(IMAC)材料(Fe3+-Click Asp);采用红外光谱、X射线电子能谱和扫描电镜等表征证明Fe3+-Click Asp成功合成。将此IMAC材料用于蛋白质酶解液和牛奶中的磷酸化肽的富集,实现了磷酸化肽的高选择性富集。本研究为磷酸化蛋白质组学提供了新材料和新方法。     

Preparation of silica-supported porous sorbent for heavy metal ions removal in wastewater treatment by organic-inorganic hybridization combined with sucrose and polyethylene glycol imprinting

A new porous sorbent for wastewater treatment of metal ions was synthesized by covalent grafting of molecularly imprinted organic-inorganic hybrid on silica gel. With sucrose and polyethylene glycol 4000 (PEG 4000) being synergic imprinting molecules, covalent surface coating on silica gel was achieved by using polysaccharide-incorporated sol-gel process starting from the functional biopolymer, chitosan and an inorganic epoxy-precursor, gamma-glycidoxypropyltrimethoxysiloxane (GPTMS) at room temperature. The prepared porous sorbent was characterized by using simultaneous thermogravimetry and differential scanning calorimeter (TG/DSC), scanning electron microscopy (SEM), nitrogen adsorption porosimetry measurement and X-ray diffraction (XRD). Copper ion, Cu²⁺, was chosen as the model metal ion to evaluate the effectiveness of the new biosorbent in wastewater treatment. The influence of epoxy-siloxane dose, buffer pH and co-existed ions on Cu²⁺ adsorption was assessed through batch experiments. The imprinted composite sorbent offered a fast kinetics for the adsorption of Cu²⁺. The uptake capacity of the sorbent imprinted by two pore-building components was higher than those imprinted with only a single component. The dynamic adsorption in column underwent a good elimination of Cu²⁺ in treating electric plating wastewater. The prepared composite sorbent exhibited high reusability. Easy preparation of the described porous composite sorbent, absence of organic solvents, cost-effectiveness and high stability make this approach attractive in biosorption.     

Photoelectrochemical reaction of chlorophyll immobilized with liquid crystal on metal surface

Chlorophyll was immobilized with liquid crystal on a platinum surface to prepare a photoexcitable electrode. Liquid crystals such as N-(p-methoxybenzylidene)-p-butylanil-ine were found to be effective on the photoexcitation of the immobilized chlorophyll. Such a chlorophyll-liquid crystal electrode produced photocurrent when it was coupled with a solution of nicotinamide adenine dinucleotide and exposed to light. The electron transfer accompanied by the photoelectrochemical reaction is discussed.     

pH titration curves of the desialylated human alpha 1-acid glycoprotein variants by combined isoelectrofocusing-electrophoresis: utilization in the development of a fractionation method for the protein variants by chromatography on immobilized metal affinity adsorbent.

Using a two-dimensional isoelectrofocusing (IEF)-electrophoresis technique, the pH titration curves of the three main desialylated variants (F1, S and A) of human alpha 1-acid glycoprotein (AAG) were studied to assist in the development of a fractionation method for the AAG variants. For this purpose, different AAG samples, each corresponding to one of the three main phenotypes of the protein (F1S/A, F1/A and S/A), were first purified by chromatographic separation of individual human plasma samples on immobilized Cibacron Blue F3G-A. The purified AAG samples were then disialylated and their heterogeneity was checked by analytical IEF. The pH-mobility curves of the desialylated AAG samples were displayed in polyacrylamide gel slabs, under a constant set of experimental conditions, by carrying out electrophoresis of the protein samples perpendicularly to two stationary pH gradients: a large gradient (pH 3.5-9.5) and a narrow gradient (pH 5-8). The curves showed that all the desialylated variants of AAG exhibited small charge differences and moved closely together between about pH 3.5-5.5 and pH 7.5-9.5. However, the variants were found to show microheterogeneity in their total charge between about pH 5.5 and 7.5 due to the titrated ionizable groups involved along this pH zone. This microheterogeneity was assumed to be accounted for by the existence of differences between the titratable histidyl residues of the AAG variants. Consequently, the interactions of the variants with immobilized transition metal ions were studied at pH 7, using affinity chromatography on an iminodiacetate Sepharose-Cu(II) gel. It was found that the A variant was strongly bound by immobilized Cu(II) ions, whereas the F1 and S variants interacted non-specifically with the immobilized ligand. This finding allowed the development of a rapid and effective fractionation method for desialylated AAG into its A and F1 or S variants, depending on the AAG phenotype, by chromatography on an immobilized affinity Cu(II) adsorbent. The quantitative relationships between immobilized Cu(II) ions and desialylated AAG (the apparent association constant and gel protein-binding capacity) were also determined using a non-chromatographic equilibrium binding technique.     

正交试验结合响应面法优化诃子多糖提取工艺

采用正交试验结合响应面法优化诃子多糖的提取工艺,以诃子多糖的提取率为指标,以固液比、提取温度、提取时间和提取次数为因素,正交试验初步筛选工艺参数,响应面法做进一步优化.结果表明,多糖提取的最佳工艺条件为固液比1∶28,提取温度69℃,提取时间1h,提取次数3次,各项指标相对误差均小于2%,应用响应面法可减少诃子多糖提取时间.     

Characteristics of a surface plasmon resonance sensor combined with a poly(vinyl chloride) film-based ionophore technique for metal ion analyses.

The characteristics of a surface plasmon resonance (SPR) sensor prepared by coating a metal film evaporated on a prism with a polymer film containing tetra-n-butyl thiuram disulfide (TBTDS) were studied. The differences in the sensitivity, selectivity, and detection limit for a Zn2+ ion of the SPR sensor were reported as a function of the thickness of the polymer film, the kind of a metal film, and the kind of a polymer film. The thinner was the polymer film, the higher was the sensitivity, and the lower was the detection limit. The Ag film gave to the SPR sensor higher sensitivity than the Au film. TBTDS contained in the poly(vinyl chloride) (PVC) film slightly improved the selectivity toward the Zn2+ ion. A non-conditioned poly(methyl methacrylate) (PMMA) film containing TBTDS gave a lower detection limit of 1.0 x 10(-6) mol/l, which is similar to that obtained by using an ion selective electrode (ISE) method, than the PVC film. The PVC film, however, gave higher concentration resolution than the PMMA film.     

Facile preparation of a high‐capacity boronate‐affinity adsorbent based on low‐cost commercial supports for selective enrichment of cis‐diol‐containing biomolecules

Boronate‐affinity adsorbents have been regarded as favorable extraction adsorbents for the pretreatment of cis‐diol‐containing biomolecules owning to their specific selectivity, but most of them have low adsorption capacity and a tedious synthesis methods. In this study, a new boronate‐affinity material (PGMA@FPBA) with high adsorption capacity was synthesized via a “one‐pot” method based on a low‐cost commercial support. The PGMA@FPBA was characterized by Fourier transform infrared spectroscopy (FT‐IR), X‐ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), and nitrogen adsorption/desorption measurements. The as‐prepared adsorbent showed good selectivity, high adsorption capacity (448 μmol/g for catechol), and fast adsorption equilibration (1 min) for cis‐diol‐containing biomolecules. Subsequently, as an example for application, the obtained PGMA@FPBA was used as a dispersive solid‐phase extraction (d‐SPE) adsorbent for enrichment of quercetin in red wine. The results indicated that the facile‐prepared boronate‐affinity adsorbent has great potential application for separation and enrichment of cis‐diol‐containing biomolecules in complex samples.     

Purification of the specific immunoglobulin G1 by immobilized metal ion affinity chromatography using nickel complexes of chelating porous and nonporous polymeric sorbents based on poly(methacrylic esters). Effect of polymer structure

Ni2+ complexes of the chelating nonporous and porous bead sorbents based on methacrylic esters crosslinked with ethylene dimethacrylate were used in isolation of the horseradish peroxidase-specific immunoglobulin IgG1 from the crude mouse ascitic fluid by immobilized metal ion affinity chromatography (IMAC). Iminodiacetic and aspartic acids were attached to porous poly(glycidyl methacrylate) beads differing in size, morphology and chemical composition. Ethylenediaminetriacetic acid and quinolin-8-ol chelating groups were attached mainly to the surface hydroxyl groups in nonporous poly(diethylene glycol methacrylate) beads through spacers. The latter sorbents exhibited better kinetic characteristics than the former but a very low IgG1 sorption capacity. In a single-step IMAC procedure, the best efficiency in the specific IgG1 purification was obtained with porous sorbents (recovery 92%, purity 73%). Differences in IMAC separations are discussed from the point of view of morphology of polymer beads as well as of the type and concentration of chelating ligands.     

Simple method for preparation of porous polyimide film with an ordered surface based on in situ self-assembly of polyamic acid and silica microspheres

In this Article, we addressed a facile method for the fabrication of porous polyimide film with an ordered surface based on the solvent-evaporation-assisted in situ self-assembly of polyamic acid (PAA, precursor of polyimide) and silica microspheres during vacuum-drying of PAA/silica colloid solution. Hydroxyl groups on the surface of silica microspheres have strong hydrogen-bonding with PAA chains, which improve the dispersion of silica microspheres in PAA/DMF solution and further help the self-assembly of PAA/silica colloid solution via solvent evaporation. The approach is simple, neither the preparation of special template nor complex preparation process and precise control over condition is necessary. Furthermore, the method could be employed for mass production of ordered porous polyimide films, and by changing the content and size of silica microspheres, the pore size and porous structure of the porous polyimide films could be tunable. The wettability behavior of the as-prepared porous polyimide films is also studied; the ordered surface topography of the porous polyimide films could change the wettability from hydrophilicity to hydrophobicity.     

Comparative studies of recombinant human granulocyte-colony stimulating factor, its Ser-17 and (His)6-tagged forms interaction with metal ions by means of immobilized metal ion affinity partitioning. Effect of chelated nickel and mercuric ions on extraction and refolding of proteins from inclusion bodies

The chelation capability of the reactive dye Light Resistant Yellow 2KT towards metal ions, particularly mercury(II) was evaluated in the pH range 5.0-7.0, and it was shown that the dye-Hg(II) complex has a free site for the interaction with human recombinant granulocyte-colony stimulating factor (rhG-CSF) from Escherichia coli. Affinity partitioning of three rhG-CSF forms--native, rhG-CSF[Cys17--->Ser17] and (His)6-rhG-CSF was studied in aqueous two-phase systems, which contained metal ions--Cu(II), Ni(II) and Hg(II)--chelated by dye-poly(ethylene glycol) at pH 5.0 and 7.0, in the presence or absence of many selected agents. It was determined, that chelated Ni(II) ions exhibited stronger interaction with the hexahistidine-tagged protein form, while the extraction power of Cu(II) ions was found to be of comparable order of magnitude for all three protein forms at pH 7.0. A comparative study of rhG-CSF and both its forms partitioning in the presence of chelated Hg(II) ions at pH 7.0 and 5.0 revealed possible direct interaction between Hg(II) ions and unpaired Cys-17 of rhG-CSF. The partitioning of three rhG-CSF forms inclusion body extract was studied in the presence of chelated Ni(II) and Hg(II) ions thus explaining the efficiency of targeted proteins renaturation gained upon their inclusion body forms interactions with chelated metal ions.     

Promoting non-transition metal alkylation with organic halides in the presence of binary systems based on an organometallic compound and a transition metal compound: VI. Effect of various additives on the rate of the steady-state process

The effect of various additives such as transition and non-transition metal oxides, hydroxides, and salts on the rate of steady-state alkylation of commercial zinc powder with ethyl bromide in the presence of ethylzinc bromide–copper(I) iodide binary system has been studied. Most of the examined compounds either do not affect the reaction rate or reduce it. Only addition of zinc(II) bromide, zinc(II) hydroxide, and water appreciably accelerates the process. Mechanism of action of the additives is discussed.     

Promoting nontransition metal alkylation with organic halides in the presence of binary systems based on an organometallic compound and a transition metal compound: V. Effect of the nature of the transition metal compound in the binary system on the rate of a steady-state process

The example of alkylation of commercial zinc and cadmium powders with organic halides in the presence of binary systems comprising an organometallic and a transition metal compounds was used to show that the nature of the transition metal compound in the binary system strongly affects the rate of a steady-state process. Therewith, the significant factors are both the nature of the transition metal and the ligand composition. It was found that the activity of the binary systems correlates with the activity of the transition metal compound in the transmetalation reaction with the organometallic component of the binary system (reduction of the transition metal compound).     

Promoting alkylation of non-transition metals with organic halides in the presence of binary systems based on organometallic compound and transition metal compound: II. Comparative study of efficiency of various agents in the course of destruction of passivating film on the surface of alkylated metal

It has been demonstrated that alkylzinc halides efficiently destroy the passivating film on the zinc-copper pair in the course of its alkylation with ethyl bromide to give ethylzinc bromide. The alkylzinc halides efficiency is comparable to that of ethyl iodide and exceeds that of salts of transition or non-transition metals as well as of ultraviolet irradiation. Addition of alkylzinc halides or metal salts as well as ultraviolet irradiation have practically no effect on the developed reaction. The results have demonstrated that the organometallic component of the binary systems is polyfunctional; this permits a generalization of known features of a number of known methods promoting direct synthesis of organometallic compounds.     

Ultra‐high performance liquid chromatography with linear ion trap‐Orbitrap hybrid mass spectrometry combined with a systematic strategy based on fragment ions for the rapid separation and characterization of components in Stellera chamaejasme extracts

Stellera chamaejasme, a famous toxic herb, has been used in traditional Chinese medicine to treat various diseases. For decades, increasing attention in modern pharmacological studies has been drawn to S. chamaejasme because of its potential anti‐tumor, anti‐virus, and anti‐fungus activities. However, due to the intrinsic complexity of chemical constitutes, hardly any investigations formed an overall recognition for the chemical profiles of this herb. In this study, a rapid and sensitive ultra‐high performance liquid chromatography coupled with linear ion trap‐Orbitrap mass spectrometry method was developed to characterize the chemical components of S. chamaejasme extracts. Based on optimized ultra‐high performance liquid chromatography and mass spectrometry conditions and systematic fragment ions‐based strategy, a total of 47 components including flavones, diterpenes, coumarins, and lignans were simultaneously detected and identified or tentatively identified for the first time. The MSⁿ fragmentation patterns of all the characterized compounds in positive or negative electrospray ionization modes were also explored and summarized. These results provided essential data for further pharmacological research on S. chamaejasme. Moreover, the method was demonstrated to be an efficient tool for rapid qualitative analysis of secondary metabolites from natural resources.