Improved conditions for the application of solid phase microextraction prior to HPLC-FLD analysis of anatoxin-a

Solid phase microextraction coupled with high performance liquid chromatography with fluorescence detection has been optimized and evaluated for a simple, rapid, and selective analysis of anatoxin-a. Four kinds of fiber (100 microm polydimethylsiloxane, 60 microm polydimethylsiloxane/divinylbenzene, 50 microm Carbowax/templated resin-100, and 85 microm polyacrylate) were evaluated for an efficient extraction of the toxin. Parameters relating to the desorption step, such as desorption mode, solvent composition, time for both static and dynamic desorption, as well as carryover, have been studied and optimized. The derivatization process was investigated using NBD-F as derivatizing reagent. Anatoxin-a derivative was formed when the anatoxin-a-loaded fiber was inserted in a vial containing 5 microL of NBD-F. Variables affecting extraction such us ionic strength, temperature, and time have been also optimized. The results obtained showed linearity in the range of 10-2000 ng and a limit of detection of 0.29 ng/mL in river water. The presented method has been applied to different environmental samples.     

Sensitive determination of 4-(4-chlorophenyl)-4-hydroxypiperidine, a metabolite of haloperidol, in a rat biological sample by HPLC with fluorescence detection after pre-column derivatization using 4-fluoro-7-nitro-2,1,3-benzoxadiazole

4-(4-Chlorophenyl)-4-hydroxypiperidine (CPHP), one of the metabolites of haloperidol, is considered to exhibit brain toxicity. CPHP concentrations in plasma and tissue homogenates (each 200 microL) from rats were analyzed by HPLC fluorescence detection after pre-column derivatization with 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F). After basic extraction of the samples with benzene, the derivatization with NBD-F was conducted in borate buffer (pH 8.0) at 60 degrees C for 3 min. Mexiletine was carried through the procedure as an internal standard. The regression equation for CPHP showed a good linearity in the range of 0.03-1 microg/mL with a detection limit of 0.008 microg/mL. The coefficient of variation was less than 11.6%. Plasma concentration-time courses of CPHP after intraperitoneal or per oral administration of CPHP, haloperidol or reduced haloperidol were examined, and the pharmacokinetic parameters were estimated. Additionally, CPHP levels in various tissues at 8 h after intraperitoneal administration of these compounds were compared. The method was simple and sensitive, useful for determination of CPHP in rat biological samples using as little as 200 microL of sample volume and could be applied for pharmacokinetic study.     

Analysis of anatoxin-a in biological samples using liquid chromatography with fluorescence detection after solid phase extraction and solid phase microextraction

Anatoxin-a is a naturally occurring, potent neurotoxin produced by some species of cyanobacteria in freshwaters. This toxin, which is a potential health hazard, especially to animals, has been determined in different biological matrices such as several cyanobacterial cultures and water samples and carps and mussels tissue using a sensitive High Performance Liquid Chromatography with Fluorescence detection method. Sonication was the technique selected for the extraction of intracellular anatoxin-a and solid phase extraction using weak cation exchange was used for the concentration and purification of the samples. 4-Fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) was used to convert anatoxin into a highly fluorescent derivative. Recovery experiments were performed for each type of matrix used in this work, and adequate values were obtained (71-87%). Limits of detection for anatoxin-a were estimated to be in the ng/L and ng/g level for water and cyanobacterial samples, respectively. The results obtained were also compared with those obtained after using solid phase microextraction, as an alternative for the extraction and purification of the samples. Advantages and disadvantages regarding to the efficiency for impurities removal, simplicity and rapidity and the potential for concentration enhancement of using both methodologies have been also discussed.     

Analysis of cyanobacterial toxins (anatoxin-a, cylindrospermopsin, microcystin-LR) by capillary electrophoresis

Capillary zone electrophoresis (CZE) and micellar electrokinetic chromatography (MEKC) were applied to the simultaneous separation of cyanobacterial toxins (anatoxin-a, microcystin-LR, cylindrospermopsin). The analytical performance data of both methods, optimized for the three toxins, were similar with a precision of migration times smaller than 0.8 RSD% and a detection limit in the range of 1-4 microg/mL, using spectrophotometric detection at 230 nm. Both methods were applied to an analysis of cyanotoxins in water bloom samples and crude cyanobacterial extracts. The results obtained indicate that, for complex matrices, the sequential application of CZE and MEKC is necessary. It is recommended to use both CE techniques for the analysis of the same sample in order to confirm the results by an orthogonal approach.     

Determination of ephedra alkaloids by liquid chromatography/tandem mass spectrometry

In conjunction with an AOAC Task Group on dietary supplements, a liquid chromatography/tandem mass spectrometry (LC-MS/MS) method was validated for measurement of 6 major alkaloids in raw ephedra sinica herb, ephedra extracts, ephedra tablets, complex dietary supplements containing ephedra, and a high-protein drink mix containing ephedra. The amount of ephedrine-type alkaloids present was determined by LC with mass selective detection. Six replicates of each matrix were analyzed on 3 separate occasions. The presence of 6 ephedrine-type alkaloids was detected at a level > 0.5 microg/g based on a 0.5 g sample. The standard curve range for this assay is from 0.02 to 1.0 microg/mL. Appropriate dilutions covered a wide range of specific alkaloid concentrations. The calibration curves for all 6 analytes had correlation coefficients > 0.995.     

毛细管电色谱-激发诱导荧光检测动物性食品中多肽类抗生素

以4-氟-7-硝基-2,1,3-苯并呋咱（NBD-F）为荧光试剂,建立了毛细管电色谱-激光诱导荧光（CEC-LIF）检测动物性食品中痕量杆菌肽、多粘菌素B和粘杆菌素等环状多肽抗生素的分析方法。在50 mmol/L的硼酸缓冲液（pH 7.5）中,多肽类抗生素经60℃衍生反应45 min。所得衍生产物采用苯基毛细管色谱填充柱进行分离,流动相为乙腈-磷酸盐缓冲液（pH 5.0,10 mmol/L）（55∶45,v/v）,辅助压力为3.8 MPa,分离电压为-10 kV,流速为0.02 mL/min。结果表明,多肽类抗生素的检出限（S/N=3）为5.0~10.0 ng/mL,满足目标物最大残留限量的检测要求。方法应用于饲料和牛奶样品的分析,平均回收率为72.9%~112.4%。该方法预处理操作简单、灵敏,为动物性食品中兽药残留分离分析提供了新手段。     

New fluorimetric method of liquid chromatography for the determination of the neurotoxin domoic acid in seafood and marine phytoplankton

Domoic acid (DA) is a neurotoxic amino acid that is responsible for the human toxic syndrome, amnesic shellfish poisoning (ASP). A new rapid, sensitive liquid chromatographic (LC) method has been developed for the determination of DA in various marine samples. DA in marine biological materials was derivatised with 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) and analysed using isocratic reversed-phase LC with fluorimetric detection. The calibration, based on standard DA solutions, was linear in the range 0.04-2 microg/ml (r2=0.998) and the detection limit (3:1, signal/noise) was better than 1 ng/ml. Using the certified reference material (MUS-1B), recoveries of DA from shellfish tissue were >95% (n=5). When a strong anion exchange SPE cartridge was used for sample clean-up the detection limit was 6 ng DA/g mussel tissue. Good reproducibility was achieved with RSD values ranging from 3% for 8 microg DA/g (n=5), to 5% for 0.04 microg DA/g (n=5). This new method was successfully applied to the determination of DA in naturally contaminated shellfish and in marine phytoplankton cultures of Pseudonitzschia sp.     

Rapid determination of fluoroquinolone residues in honey by a microbiological screening method and liquid chromatography

A rapid and efficient method was developed for the simultaneous determination of seven fluoroquinolone (FQ) residues: norfloxacin, ciprofloxacin, danofloxacin, enrofloxacin, orbifloxacin, sarafloxacin, and difloxacin in honey. The samples were first screened with a microbiological method by using test plates made from metal-free purified agar seeded with Bacillus subtilis BGA. When a sample was found to contain FQ residues by using the microbiological method, it was analyzed by LC with fluorescence detection (LC/FL). FQs were extracted with Na2EDTA-McIlvaine buffer and purified by a dual SPE method in which a cation-exchange cartridge was connected to an anion-exchange cartridge. The overall recoveries of the seven FQs ranged from 70.0 to 92.1%. The intra-assay and interassay CVs were < or = 7.8 and < or = 5.1%, respectively. For the microbiological method, the LOD values ranged from 2 to 9 microg/kg. For LC/FL, the LOQ values ranged from 2 to 7 microg/kg. The developed method was used to analyze 70 honey samples. In 14 samples in which the microbiological method detected the presence of FQ residues, norfloxacin, ciprofloxacin, and enrofloxacin were identified by LC/FL.     

Analysis of T-2 and HT-2 toxins in cereal grains by immunoaffinity clean-up and liquid chromatography with fluorescence detection

A sensitive, precise and accurate method has been developed for the simultaneous determination of T-2 and HT-2 toxins in cereal grains at ppb levels using high-performance liquid chromatography (HPLC) with fluorescence detection and 1-antroylnitrile (1-AN) as labeling reagent after immunoaffinity clean-up. Cereal samples were extracted with methanol/water (90:10, v/v), and the extracts were cleaned-up through commercially available immunoaffinity columns containing monoclonal anti-T-2 antibodies (T-2 test HPLC, Vicam). T-2 and HT-2 toxins were quantified by reversed-phase HPLC with fluorometric detection (excitation wavelength 381 nm, emission wavelength 470 nm) after derivatization with 1-AN. The monoclonal antibody showed 100% cross-reactivity with both T-2 and HT-2 toxin, and the immunoaffinity column clean-up was effective up to 1.4 microg of both toxins. The method was successfully applied to the analysis of T-2 and HT-2 toxins in wheat, maize and barley. Recoveries from spiked samples with toxin levels from 25 to 500 microg/kg ranged from 70% to 100%, with relative standard deviation generally lower than 8%. The limit of detection of the method was 5 microg/kg for T-2 toxin and 3 microg/kg for HT-2 toxin, based on a signal-to-noise ratio 3:1. HT-2 toxin was detected in ten naturally contaminated wheat samples out of 14 samples analyzed, with toxin levels ranging from 10 to 71 microg/kg; three of them contained also T-2 toxin up to 12 microg/kg.     

Spectrophotometric determination of saponin in Yucca extract used as food additive

A spectrophotometric method was developed for the determination of saponin in Yucca extract or its preparation for food additive use. A saponin fraction of Yucca extract was prepared by column chromatography with porous polymer, and hydrolyzed with a 2 mol/L mixture of hydrochloric acid-ethanol (1 + 1) to generate sapogenin. Sapogenin amounts were determined by measuring absorbance at 430 nm, based on the color reactions with anisaldehyde, sulfuric acid, and ethyl acetate. Recoveries from Yucca extracts were 91.5-95.1%, and the detection limit was 10 microg/kg. Commercial Yucca extracts for food additive use were composed of 5.6-6.4% (w/w) saponin, making it a minor component.     

Use of solid-phase microextraction/gas chromatography-electron capture detection for the determination of energetic chemicals in marine samples

Gas chromatography with electron capture detection (GC-ECD) is a highly explosive-sensitive analytical technique. However, its application to the analysis of sediment extracts is hampered by the presence of numerous endogenous interferences. In the present study, solid-phase microextraction (SPME) was used both as a purification technique for sediment extracts and as an extraction technique for water samples prior to analysis by GC-ECD. SPME/GC-ECD coupling was optimized and applied to the trace analysis of nine explosives including nitroaromatics and RDX in real seawater and marine sediment samples. Addition of a high concentration of salt (30%, w/v) in the aqueous medium and use of a carbowax/divinylbenzene (CW/DVB) coating led to optimal extraction efficiencies. Method detection limits (MDLs) ranged from 0.05 to 0.81 microg/L in water and from 1 to 9 microg/kg in dry sediment. Except for RDX, spike recoveries in seawater were satisfactory (89-147%) when samples were fortified at 2 microg/L of each analyte. Spike recoveries from dry sediment fortified at 10 microg/kg of each analyte gave lower recoveries but these could also be due to degradation in the matrix. With a smaller volume of aqueous sample required compared to solid-phase extraction (SPE), SPME is an attractive method for the analysis of limited volumes of sediment pore-water. Moreover, the use of SPME eliminated interferences present in sediment extracts thus allowing the detection of the target analytes that were otherwise difficult to detect by direct injection.     

A disposable acetylcholinesterase-based electrode biosensor to detect anatoxin-a(s) in water

Anatoxin-a(s) is a hazardous toxin released by cyanobacteria during bacterial blooms. A simple and fast method to detect this hazardous compound using a biosensor based on the electrochemical detection of the activity of acetylcholinesterase was developed. Among several acetylcholinesterases, electric eel enzyme was found to be the most sensitive to anatoxin-a(s) and was thus used to build disposable amperometric sensors. The system displayed a detection limit of 1 microg/L anatoxin-a(s). No unspecific effect was noticed with real water samples but spiked toxin was accurately detected. Oxime reactivation was used to discriminate between the toxin and potential insecticides present in the sample.     

Selective determination of cysteines through precolumn double-labeling and liquid chromatography followed by detection of intramolecular FRET

In this paper we introduce a novel approach for highly selective and sensitive analysis of cysteines (glutathione, cysteine, and homocysteine). This method is based on the detection of intramolecular fluorescence resonance energy transfer (FRET) in a liquid chromatography (LC) system after double-labeling of the amino and sulfhydryl groups of the cysteines. In this detection process, we monitored the FRET between the amine-derivatized and thiol-derivatized fluorophores. We screened 16 combinations of fluorescent reagents. As a result, FRET occurred most effectively when the sulfhydryl and amino groups of the cysteines were derivatized with 7-diethylamino-3-[{4'-(iodoacetyl)amino}phenyl]-4-methylcoumarin (DCIA, Ex/Em 390/480 nm) and 4-fluoro-7-nitrobenz-2-oxo-1,3-diazole (NBD-F, Ex/Em 480/540 nm), respectively, in this order. The double-labeled cysteines emitted NBD-F fluorescence (540 nm) through an intramolecular FRET process when they were excited at the wavelength of maximum excitation of DCIA (390 nm). The generation of FRET was confirmed by comparison with analysis of n-amylamine or tryptophan (amines without a sulfhydryl group) and 6-mercaptohexanol (thiol without an amino group) performed using LC and a three-dimensional fluorescence detection system. We were able to separate the double-labeled cysteines (DCIA and NBD-F) when performing LC on an ODS column with isocratic elution. The limits of quantification (signal-to-noise ratio = 10) and detection (signal-to-noise ratio = 3) for the cysteines, for a 20-μL injection volume, were in the range 150-670 fmol and 46-200 fmol, respectively. The sensitivity of the intramolecular FRET-forming derivatization method is higher than that of a system which takes advantage of conventional detection of the derivatives. Furthermore, this method provides sufficient selectivity and sensitivity to determine the total cysteines present in the plasma of healthy humans.     

Rapid surface plasmon resonance immunobiosensor assay for microcystin toxins in blue-green algae food supplements

A surface plasmon resonance (SPR) immunobiosensor assay was developed and validated to detect microcystin toxins in Spirulina and Aphanizomenon flos-aquae blue-green algae (BGA) food supplements. A competitive inhibition SPR-biosensor was developed using a monoclonal antibody to detect microcystin (MC) toxins. Powdered BGA samples were extracted with an aqueous methanolic solution, centrifuged and diluted in HBS-EP buffer prior to analysis. The assay was validated in accordance with the performance criteria outlined in EU legislation 2002/657/EC. The limit of detection (LOD) of the assay was calculated from the analysis of 20 known negative BGA samples to be 0.561 mg kg⁻¹. The detection capability (CCβ) of the assay was determined to be ≤0.85 mg kg⁻¹ for MC-LR. The biosensor assay was successfully applied to detect MC-LR toxins in BGA samples purchased on the Irish retail market. MC-LR was detected in samples at levels ranging from <0.5 to 2.21 mg kg⁻¹. The biosensor results were in good agreement with an established LC-MS/MS assay. The assay is advantageous because it employs a simple clean-up procedure compared to chemical assays and allows automated unattended analysis of samples unlike ELISA.     

Determination of Polycyclic Aromatic Hydrocarbons in Traditional Chinese Medicine Raw Material,Extracts, and Health Food Products

The four polycyclic aromatic hydrocarbon markers (PAH4) of benzo[a]anthracene (BaA), chrysene (Chr), benzo[b]fluoranthene (BbF), and benzo[a]pyrene (BaP) are indicators showing polycyclic aromatic hydrocarbon (PAH) contamination levels in Chinese medicine raw materials (CMRMs), extracts and health food products; Samples of herbal medicine, herbal extracts, and food supplements were extracted with n-hexane, then cleaned up sequentially on Florisil and EUPAH solid-phase extraction (SPE) columns. A gas chromatography–mass spectrometry method for the determination of four polycyclic aromatic hydrocarbon markers in Chinese medicine raw material, extracts, and health food products was established; In spiked-recovery experiments, the average recovery was about 78.6–107.6% with a precision of 2.3–10.5%. The limit of quantification (LOQ) and limit of detection (LOD) of the PAH4 markers in this method were 2.0 μg/kg and 0.7 μg/kg, respectively. When the developed method was utilized to determine PAH4 contents in 12 locally available health food products, 3 samples contained over 10.0 μg/kg BaP, and 5 samples contained over 50.0 μg/kg PAH4. The European Union (EU) limits for BaP and PAH4 are 10 and 50.0 μg/kg, respectively; therefore, more attention must be drawn to the exposure risk of BaP and PAH4 in CMRMs, their extracts, and health food products. According to the risk assessment based on the Margin of Exposure (MOE) method, it is recognized that the products mentioned in this study pose a low risk.     

Detection of transient events in the presence of background noise

We describe a method to detect and count transient burstlike signals in the presence of a significant stationary noise. To discriminate a transient signal from the background noise, an optimum threshold is determined using an iterative algorithm that yields the probability distribution of the background noise. Knowledge of the probability distribution of the noise then allows the determination of the number of transient events with a quantifiable error (wrong-positives). We apply the method, which does not rely on the choice of free parameters, to the detection and counting of transient single-molecule fluorescence events in the presence of a strong background noise. The method will be of importance in various ultra sensing applications.     

Determination of residues of enrofloxacin and its metabolite ciprofloxacin in chicken muscle by capillary electrophoresis using laser-induced fluorescence detection

A method for the residue analysis of the veterinary antimicrobial agent enrofloxacin and its active desethyl metabolite ciprofloxacin in chicken muscle tissue has been developed and validated. The detection of the analytes was performed by laser-induced fluorescence (LIF) detection using a HeCd laser (lambda(ex) = 325 nm) providing an enhancement in sensitivity and selectivity compared to conventional UV detection. The assay has been validated with satisfying results. The limits of quantification for enrofloxacin and ciprofloxacin were 5 microg/kg and 20 microg/kg, respectively, with a fivefold preconcentration yielded by a sample clean-up with a simple liquid-liquid extraction procedure. Calibration graphs were linear from 5 to 1000 microg/kg for enrofloxacin and from 20 to 1000 microg/kg for ciprofloxacin. The assay allows the detection of contaminated muscle samples at the required maximum residue limit of the European Union, which is 100 microg/kg for the sum of enrofloxacin and ciprofloxacin.     

Analysis of EU priority polycyclic aromatic hydrocarbons in food supplements using high performance liquid chromatography coupled to an ultraviolet, diode array or fluorescence detector

High performance liquid chromatography coupled to an ultraviolet, diode array or fluorescence detector (HPLC/UV-FLD) has been used to set up a method to detect the 15(+1) EU priority polycyclic aromatic hydrocarbons (PAHs) in food supplements covering the categories of dried plants and plant extracts excluding oily products. A mini validation was performed and the following parameters have been determined: limit of detection, limit of quantification, precision, recovery and linearity. They were in close agreement with quality criteria described in the Commission Regulation (EC) No 333/2007 concerning the PAH benzo[a]pyrene in foodstuffs, except the not fluorescent cyclopenta[c,d]pyrene for which the UV detection leads to a higher limit of detection. Analysis of twenty commercial food supplements covering mainly the class of dried plants was performed to evaluate their PAHs contamination levels and to test the applicability of the method to various plant matrices. Fifty percent of analyzed samples showed concentration exceeding 2 μg kg⁻¹ for one or more PAHs.     

Simultaneous determination of aflatoxins, ochratoxin A, and zearalenone in grains by new immunoaffinity column/liquid chromatography

The simultaneous determination of mycotoxins was performed in 3 steps: extraction, cleanup, and detection. For extraction, a mixture of acetonitrile-water (60 + 40, v/v) was proved appropriate. For cleanup, a new Afla-Ochra-Zea immunoaffinity column was used. After derivatization with trifluoroacetic acid, the mycotoxins aflatoxins, ochratoxin A (OTA), and zearalenone (ZEA) were determined simultaneously by liquid chromatography with fluorescence detection. The detection limits in different matrixes after cleanup with the new immunoaffinity column were very low: aflatoxins, 0.002-0.7 microg/kg; OTA, 0.07-0.25 microg/kg; ZEA, 1-3 microg/kg. The limits of determination were: aflatoxins, 0.25 microg/kg; OTA, 0.5 microg/kg; ZEA, 5 microg/kg. The recovery rates for aflatoxins, OTA, and ZEA for rye and rice were between 86 and 93% when a 0.5 g sample matter per immunoaffinity column was used.     

Determination of glycyrrhizin in liqueurs by on-line coupled capillary isotachophoresis with capillary zone electrophoresis

An on-line coupled capillary isotachophoresis-capillary zone electrophoresis method for the determination of glycyrrhizin in liqueurs is described. The optimised electrolyte system was 5 mM HCl+11 mM varepsilon-aminocaproic acid+0.05% hydroxyethylcellulose+30% methanol (leading electrolyte), 5 mM caproic acid+30% methanol (terminating electrolyte) and 20 mM caproic acid+10 mM histidine+0.1% hydroxyethylcellulose+30% methanol (background electrolyte). Method characteristics, i.e., linearity (20-500 ng/ml), accuracy (recovery 99+/-4%), intra-assay repeatability (2%), intermediate repeatability (3.8%) and detection limit (8 ng/ml) were determined. Speed of analysis, low laboriousness, high sensitivity and low-running cost are the typical attributes of the capillary isotachophoresis-capillary zone electrophoresis method. Developed method was successfully applied to analysis of liqueurs with liquorice extract and some foods (sweets and food supplements) containing liquorice. Found levels of glycyrrhizin in liqueurs, sweets and food supplements varied between 1-16 mg/l, 850-1050 mg/kg and 1.6-1.8 g/kg, respectively.