Complexation of Hg2+ with α‐Lipoic and Dihydrolipoic Acids: Study by Differential Pulse Voltammetry on Rotating Au‐Disk Electrode and ESI‐MS

The complexation of the natural antioxidants α‐lipoic acid (ALA) and its reduced form dihydrolipoic acid (DHLA) with Hg²⁺ was investigated by a recently proposed differential pulse voltammetric (DPV) method using the rotating Au‐disk electrode. Complexation processes are proposed from the multivariate curve resolution by alternating least squares (MCR‐ALS) analysis of DPV titration data. Main complexes were both 1 : 1 Hg : ALA and Hg : DHLA, although the formation of 1 : 2 complexes can be also deduced. ALA and DHLA show different Hg²⁺‐binding patterns at different pH. Voltammetric findings are completed with the data obtained by electrospray ionization mass‐spectrometry (ESI‐MS), especially in negative mode.     

Cover: Journal of the Chinese Chemical Society 2/2023

In this figure , a new NBD-based chemosensor NTCH was developed for detecting Hg²⁺ through a color change from pale yellow to pink. NTCH was utilized for detecting Hg²⁺ with a low detection limit in real water samples and test strips. Detection mechanism of NTCH to Hg²⁺ was explained with the spectroscopic studies and theoretical calculations. More details about this figure will be discussed by Prof. Cheal Kim and his coworkers on page 128-135 in this issue.

     

A Highly Selective Colorimetric and Fluorescent Probe for Cu2+ and Hg2+ Ions Based on a Distyryl BODIPY with Two Bis(1,2,3‐triazole)amino Receptors

A new distyryl boron dipyrromethene (BODIPY) with two bis(1,2,3‐triazole)amino substituents has been prepared by typical Knoevenagel condensation followed by click reaction. The compound selectively binds to Cu²⁺ and Hg²⁺ ions in CH₃CN/H₂O (1:1 v/v) to give remarkably blueshifted electronic absorption and fluorescence bands as a result of inhibition of the intramolecular charge‐transfer process upon binding to these metal ions. The color changes can be easily seen by the naked eye. The binding stoichiometry between this probe and Cu²⁺ ions has been determined to be 1:2 by a Job plot of the fluorescence data with a binding constant of ((6.2±0.6)×10⁹) M ^?2. The corresponding value for Hg²⁺ ions is about sixfold smaller.     

2-Aminopyridine derivative as fluorescence ‘On–Off’ molecular switch for selective detection of Fe3+/Hg2+

2-Amino-6-methyl-4-phenyl-nicotinonitrile 1, a 2-aminopyridine-based fluorescent compound, was found to be a fluorescent chemosensor for the detection of Fe³⁺ and Hg²⁺ ions over a number of other metal ions. Compound 1 was synthesized in one step using a multicomponent reaction, and characterized using common spectroscopic tools. During Fe³⁺/Hg²⁺ sensing the compound 1 followed a ‘switch-off’ mechanism. Further, compound 1 could sense Fe³⁺ over Hg²⁺ by its distinct absorption and fluorescence quenching behaviors. 1:1 complex formation of 1 with Fe³⁺ and Hg²⁺ was clearly understood from Job’s plot. The present work brings additional evidence on the importance of multicomponent reactions which could lead to the development of fluorescence chemosensor in one step for the selective detection of biologically important metal ions.     

Using electrospray ionization mass spectrometry to explore the interactions among polythymine oligonucleotides, ethidium bromide, and mercury ions

We have used electrospray ionization mass spectrometry (ESI-MS) and fluorescence and circular dichroism (CD) spectroscopy to explore the binding of ethidium bromide (EthBr) to non-self-complementary polythymine (polyT) strands in the absence and presence of Hg²⁺ ions. In the gas phase, ESI-MS revealed that Hg²⁺ ions have greater affinity, through T-Hg²⁺-T coordination, toward polyT strands than do other metal ions. These findings are consistent with our fluorescence and CD results obtained in solution; they revealed that more T₃₃-EthBr-Hg²⁺ complexes existed upon increasing the concentrations of Hg²⁺ ions (from 0 to 50 μM). Surprisingly, the ESI-MS data indicated that the Hg²⁺ concentration dependence of the interaction between T₃₃ and EthBr is biphasic. Our ESI-MS data revealed that the T₃₃-EthBr-Hg²⁺ complexes formed with various stoichiometries depending on their relative concentrations of the components and the length of the DNA strand. When the concentrations of T₃₃/EthBr/Hg²⁺ were 5/5/2. 5 μM and 5/10/7. 5 μM, 1:1:1 and 1:1:2 T₃₃-EthBr-Hg²⁺ complexes were predominantly formed, respectively. Thus, Hg²⁺-induced DNA conformational changes clearly affect the interactions between DNA and EthBr.     

Calix[4]arene-based crab-like molecular sensors for highly selective detection of mercury and copper ions

In this work, two novel chemosensors based on calix[4]arene bearing (thio)barbituric acid groups (BC1 and BC2) were synthesised, and their structures were characterised by HRMS, NMR and FTIR. Furthermore, their binding properties towards various biologically relevant metal ions were studied by fluorescence titrations, ¹H NMR spectroscopies and Job’s plot evaluations. The chemosensor BC1 displayed excellent binding affinity and selectivity towards Cu²⁺, which was characterised using fluorescence spectroscopy. On the other hand, BC2 exhibited a very remarkable fluorescence enhancement as well as visible colour change from pale green to sunset yellow, in presence of Hg²⁺ ions. Finally, Job’s plot method revealed 1:1 binding stoichiometry for both BC1:Cu²⁺ complex and BC2:Hg²⁺ complex.     

A bis(rhodamine 6G)-based fluorescent sensor for Hg2+: microwave-assisted synthesis,photophysical properties,and computational studies

A fluorescent and colorimetric sensor based on rhodamine 6 g (RD6g) was designed, synthesized, and characterized using microwave irradiation. The sensing behavior of this compound was studied by UV–visible and fluorescence spectroscopy. Sensor RD6g exhibits a high selectivity and an excellent sensitivity and is a dual-responsive colorimetric and fluorescent Hg²⁺-specific sensor in aqueous buffer solution. Mercury ions give rise to the development of a very fluorescent ring-open amide spirolactam system. The detection limit for Hg²⁺ was found to be 1.2?×?10^?8 M. The binding ratio of RD6g-Hg²⁺ complex was determined to be 1:1 according to the Job’s plot. The reversibility of RD6g?Hg²⁺ complex has been achieved with CN^? anions. The test strip based on RD6g was developed, which could be used as a suitable and methodical Hg²⁺ test kit.

     

Rhodamine based derivative and its zinc complex: synthesis and recognition behavior toward Hg(II)

A simple fluorescent probe, which contains rhodamine and aminoquinoline moieties, was designed and prepared for selective detection of Hg²⁺ in acetonitrile. RbQ exhibited high selectivity and sensitivity toward Hg²⁺ over other common metal ions. The recognition of RbQ toward Hg²⁺ can be detected by fluorescence spectra, absorption spectra, and even by naked eyes. The binding ratio of the RbQ–Hg²⁺ complex was found to be 1:1 according to Job plot experiment, and the limit of detection was 1.05×10⁻⁷ M. Moreover, the prepared complex RbQ–Zn²⁺ (RbQZ) could detect Hg²⁺ in a ratiometric way and showed lower limit of detection (2.95×10⁻⁸ M) than RbQ in the same condition. Finally, we also demonstrated that the aminoquinoline–zinc complex could be served as a new and effective FRET donor for rhodamine derivatives.     

The turn-off fluorescent sensors based on thioether-linked bisbenzamide for Fe3+ and Hg2+

Some dibenzamide derivatives with a thioether linker were designed, synthesized and characterized. The specific responses to Hg²⁺ and Fe³⁺ were investigated by fluorescence. According to fluorescence titration, the Job plot, ¹H NMR, and ESI-mass analysis, the derivative with mono-hydroxyl substituent (1b) on the aromatic ring has high selectivity for Fe³⁺ ion with the formation of 1:1 1b-Fe³⁺ complexes. The specificity of 1c for Hg²⁺ could be switched by swapping the substituent from hydroxyl to amino, and a 1:2 (1c-Hg²⁺) complex was formed. Along with the obtained results, density functional theory (DFT) and natural bond orbital (NBO) analyses, Time-dependent (TD) DFT and natural transition orbital (NTO) analyses were employed to explore the geometric structures, properties and possible mechanisms.     

A novel tryptamine-appended rhodamine-based chemosensor for selective detection of Hg2+ present in aqueous medium and its biological applications

A novel rhodamine–tryptamine conjugate–based fluorescent and chromogenic chemosensor (RTS) for detection of Hg²⁺ present in water was reported. After gradual addition of Hg²⁺ in aqueous methanol solution of RTS, a strong orange fluorescence and deep-pink coloration were observed. The probe showed high selectivity towards Hg²⁺ compared to other competitive metal ions. The 1:1 binding stoichiometry between RTS and Hg²⁺ was established by Job’s plot analysis and mass spectroscopy. Initial studies showed that the synthesized probe RTS possessed fair non-toxicity and effectively passed through cell walls of model cell systems, viz., human neuroblastoma (SHSY5Y) cells and cervical cells (HeLa) to detect intercellular Hg²⁺ ions, signifying its utility in biological system. The limit of detection (LOD) was found to be 2.1 nM or 0.42 ppb by fluorescence titration. Additionally, the potential relevance of synthesized chemosensor for detecting Hg²⁺ ions in environmental water samples has been demonstrated.

ᅟ

     

Detoxification of mercury species—an in vitro study with antidotes in human whole blood

To investigate the effects of mercury species intoxication and to test the efficiency of different commonly applied antidotes, human whole blood and plasma surrogate samples were spiked with inorganic mercury (Hg²⁺) and methylmercury (MeHg⁺, CH₃Hg⁺) prior to treatment with the antidotes 2,3-dimercaptopropan-1-ol (British Anti Lewisite), 2,3-dimercaptosuccinic acid (DMSA), and N-acetylcysteine (NAC). For mercury speciation analysis in these samples, liquid chromatography was coupled to either inductively coupled plasma mass spectrometry (ICP-MS) or electrospray ionisation time-of-flight mass spectrometry (ESI-TOF-MS). Adduct formation between mercury species and physiological thiols (cysteine and glutathione) was observed as well as the release of glutathione under treatment with the antidotes DMSA and NAC.     

A dual-function chemosensor based on coumarin for fluorescent turn-on recognition of Hg2+ and colorimetric detection of Cu2+ in aqueous media

A novel coumarin derivative CTT was synthesized via the condensation of 7-(N,N-diethylamino) coumarin-3-aldehyde with 5-amino-1,3,4-thiadiazole-2-thiol and its structure was characterized using infrared spectroscopy (IR), ¹H NMR, mass spectrometry (MS) techniques, and elemental analysis. The recognition properties of CTT with metal ions were investigated in CH₃CN–H₂O (v/v = 1/1) solution using UV–vis absorption and fluorescence emission spectrum method. The results showed that CTT could monitor Cu²⁺ and Hg²⁺ simultaneously as a dual-function chemosensor in CH₃CN–H₂O (v/v = 1/1). CTT could be used to detect Cu²⁺ colorimetrically; when using CTT, a color change from yellowish-brown to yellowish-green could be readily observed by the naked eye. CTT showed turn-on fluorescent recognition of Hg²⁺, the fluorescence enhancement was attributed to the inhibited C=N isomerization and the obstructed excited state intramolecular proton transfer (ESIPT) of CTT. The recognition mechanism of CTT for Cu²⁺ and Hg²⁺ was studied by experiments and theoretical calculations, respectively. Therefore, CTT has the ability to be a “single chemosensor for dual targets.”     

Selective Detection of Hg2+ Ions with Boron Dipyrromethene‐Based Fluorescent Probes Appended with a Bis(1,2,3‐triazole)amino Receptor

By using a copper‐promoted alkyne–azide cycloaddition reaction, two boron dipyrromethene (BODIPY) derivatives bearing a bis(1,2,3‐triazole)amino receptor at the meso position were prepared and characterized. For the analogue with two terminal triethylene glycol chains, the fluorescence emission at 509 nm responded selectively toward Hg²⁺ ions, which greatly increased the fluorescence quantum yield from 0.003 to 0.25 as a result of inhibition of the photoinduced electron transfer (PET) process. By introducing two additional rhodamine moieties at the termini, the resulting conjugate could also detect Hg²⁺ ions in a highly selective manner. Upon excitation at the BODIPY core, the fluorescence emission of rhodamine at 580 nm was observed and the intensity increased substantially upon addition of Hg²⁺ ions due to inhibition of the PET process followed by highly efficient fluorescence resonance energy transfer (FRET) from the BODIPY core to the rhodamine moieties. The Hg²⁺‐responsive fluorescence change of these two probes could be easily seen with the naked eye. The binding stoichiometry between the probes and Hg²⁺ ions in CH₃CN was determined to be 1:2 by Job′s plot analysis and ¹H NMR titration, and the binding constants were found to be (1.2±0.1)×10¹¹ m ^?2 and (1.3±0.3)×10¹⁰ m ^?2, respectively. The overall results suggest that these two BODIPY derivatives can serve as highly selective fluorescent probes for Hg²⁺ ions. The rhodamine derivative makes use of a combined PET‐FRET sensing mechanism which can greatly increase the sensitivity of detection.     

Ratiometric Fluorescent Chemosensor for Selective Detection Cr3+ based on Carbazole and Benzimidazole

A novel Cr³⁺‐selective ratiometric fluorescent chemosensor 1‐substitued‐2‐carbazoleylbenzoimidazole ( L ) based on benzimidazole and carbazole was synthesized and characterized by nuclear magnetic resonance (¹H/¹³C NMR), Fourier transform infrared spectrometry (FTIR), and mass spectroscopy. L could selectively detect Cr³⁺ over other metal ions by UV–vis absorption and fluorescence emission spectroscopic methods in CH₃CN. L showed ratiometric fluorescent recognition of Cr³⁺; the fluorescent responses could be observed by naked eye under a UV lamp. The binding stoichiometry ratio of the L –Cr³⁺ complex was found to be 1:1 according to Job’s plot and MALDI‐TOF MS analysis. The results of DFT calculation supported this conclusion.     

Unexpected highly selective fluorescence ‘turn-on’ and ratiometric detection of Hg based on fluorescein platform

Methylated fluorescein 1 was explored for fluorescence ‘turn-on’ and ratiometric detection of Hg²⁺ in THF and CH₂Cl₂/MeOH (v/v=9:1), respectively, with unexpected high selectivity. In the presence of Hg²⁺, characteristic structured absorption band of 1 diminished and a new sharp band appeared at 445 nm. Meanwhile a blue shifted and enhanced emission was observed. The ratio of the fluorescence intensity at 559 and 478 nm increased linearly with [Hg²⁺], and solution color changing from yellow to cyan under irradiation at 365 nm in CH₂Cl₂/MeOH. Job plot indicated a 1:1 stoichiometry for 1-Hg²⁺ complex in solution. ¹H NMR titration and IR spectra suggested the coordination of carbonyl group in xanthene moiety to Hg²⁺, affording its spectral behavior. Compound 2 bearing two triazolyl amino esters in place of methyl group showed quite similar behavior to Hg²⁺, which indicated that substituents did not interfere with the specific binding behavior of fluorescein platform. Our work presents a new way to explore xanthene dyes as new chemosensors by modulating electron density on the xanthene ring through non-covalent interactions with carbonyl group.     

Gas‐phase copper and silver complexes with phosphorothioate and phosphorodithioate pesticides investigated using electrospray ionization mass spectrometry

Efforts to improve agricultural productivity have led to a growing dependency on organophosphorus pesticides. Phosphorothioate and phosphorodithioate pesticides are organophosphorus pesticide subclasses with widespread application for the control of insects feeding on vegetables and fruits. However, even low doses of these pesticides can cause neurological problems in humans; thus, their determination and monitoring in agricultural foodstuffs is important for human health. Phosphorothioate and phosphorodithioate pesticides may be poorly ionized during electrospray, adversely affecting limits of detection. These pesticides can form complexes with Cu²⁺ and Ag⁺, however, potentially improving ionization. In the present work, we used electrospray ionization/mass spectrometry (ESI/MS) to study fenitrothion, parathion, diazinon, and malathion coordination complexes with silver and copper ions. Stable 1 : 1 and 1 : 2 metal/pesticide complexes were detected. Mass spectra acquired from pesticide solutions containing Ag⁺ or Cu²⁺ showed a significant increase in signal‐to‐background ratio over those acquired from solutions containing only the pesticides, with Ag⁺ improving detection more effectively than Cu²⁺. Addition of Ag⁺ to a pesticide solution improved the limit of detection by ten times. The relative affinity of each pesticide for Ag⁺ was related to complex stability, following the order diazinon > malathion > fenitrothion > parathion. The formation of Ag⁺–pesticide complexes can significantly improve the detection of phosphorothioate and phosphorodithioate pesticides using ESI/MS. The technique could potentially be used in reactive desorption electrospray ionization/mass spectrometry to detect phosphorothioate and phosphorodithioate pesticides on fruit and vegetable skins. Copyright © 2015 John Wiley & Sons, Ltd.     

A simple colorimetric chemosensor for relay detection of Cu2+ and S2− in aqueous solution

A simple colorimetric chemosensor 1 was developed for the sequential detection of Cu²⁺ and S^2?. Sensor 1 could rapidly detect Cu²⁺ by an obvious color change from colorless to yellow. The binding mode of 1 to Cu²⁺ was determined to be a 1:1 complexation stoichiometry through Job plot and ESI-mass spectrometry analyses. The sensing mechanism of Cu²⁺ by 1 was proposed by theoretical calculations. Importantly, the detection limit for Cu²⁺ was found to be 0.12 μM, which was much lower than the recommended value (31.5 μM) of the World Health Organization (WHO). Additionally, 1 could detect and quantify Cu²⁺ in real water samples. Moreover, the resulting 1-Cu²⁺ complex could be used as a highly selective colorimetric sensor for S^2? in the presence of various anions without any interference. The detection limit for S^2? was determined to be 1.66 μM, which was much lower than the guideline (14.8 μM) recommended by WHO in fresh water.     

A Coumarin-boronic Based Fluorescent “ON-OFF” Probe for Hg2+ in Aqueous Solution

In this work, we reported a simple coumarin-boronic acid ester fluorescent probe 1 , which displayed very high “ON-OFF” fluorescence response for Hg²⁺ in an aqueous environment (H₂O/CH₃CN = 1:1, v/v) or in a PBS solution (pH = 7.4). With the addition of Hg²⁺ to the solution of probe, a color change from light yellow to orange could be observed by naked eye. The detection limits were lower than the permitted level of Hg²⁺ in drinking water defined by WHO. Infrared spectroscopy, mass spectroscopy and ¹H NMR titration studies showed that probe 1 formed a 1:1 complex with Hg²⁺. In addition, the probe was non-toxic to cells and could stain specifically the membrane region surrounding the HeLa cell.     

Ethylenediaminetetraacetic acid (EDTA) as an auxiliary tool in the electrospray ionization mass spectrometry analysis of native and derivatized β-cyclodextrins,maltoses, and fructans contaminated with Ca and/or Mg

The effect of Ca²⁺ (and Mg²⁺) and the disodium salt of ethylenediaminetetraacetic acid (EDTA), a well known Ca²⁺ (and Mg²⁺) chelating agent, on the volatilization/ionization of carbohydrates by using electrospray ionization mass spectrometry has been studied. Model compounds such as maltoses (maltose to maltoheptaose), β-cyclodextrins (β-cyclodextrin, methyl-β-cyclodextrin, heptakis(2,6-di-O-methyl)-β-cyclodextrin, heptakis(2,3,6-tri-O-methyl)-β-cyclodextrin, and 2-hydroxypropyl-β-cyclodextrin) and fructans (sucrose, 1-ketose, nystose, and 1F-fructofuranosylnystose) were used.     

A fluorescent and colorimetric chemosensor for selective detection of aluminum in aqueous solution

We have synthesized a new Schiff base 1, which detects Al³⁺ through fluorescence and naked eye in aqueous solution. The sensor 1 exhibited selective and sensitive recognition toward Al³⁺ via significant fluorescence enhancement (31-fold). Moreover, it showed a significant color change from colorless to yellow. The complex formation was proposed to be 1:1 ratio, based on the Job plot, ESI-mass spectrometry analysis, ¹H NMR titration, and IR analysis. The detection limit was 1.00 μM, which is below the WHO acceptable limit (1.85 μM) in drinking water. In addition, the sensor 1 could be recyclable simply through treatment with a proper reagent such as EDTA.