Application of hybrid oxidative processes based on cavitation for the treatment of commercial dye industry effluents

The present work demonstrates the significant role of ultrasound (US) in intensifying the efficacy of the combination with Fenton reagent and/or ozone for the treatment of real dye industry industrial effluent procured from the local industry. Initial part of the work focused on analysing the literature based on combination approaches of US with different oxidants applied for the treatment of real and simulated effluents focusing on the dyes. The work also provides guidelines for the selection of optimal operating parameters for maximizing the intensification of the degradation. The second part of the work presents an experimental study into combined approaches of ultrasound with ozone (O₃) and Fenton’s reagent for treatment of real effluent. Under optimized conditions (100 W, 20 kHz and duty cycle of 70%), maximum COD reductions of 94.79% and 51% were observed using a combined approach of US + Fenton oxidation followed by lime treatment for the treatment of effluent-I and effluent-II respectively at H₂O₂ loading of 17.5 g/L, H₂O₂/Fe²⁺ ratio of 3, pH of 4, CaO dose of 1 g/L and an overall treatment time of 70 min. US + Fenton + O₃ followed by lime was also applied for treatment under ozone loading of 1 g/h for the treatment of effluent-I and it was found that maximum COD reduction of 95.12% was obtained within 30 min of treatment time, indicating use of ozone did not result in significant value addition in terms of COD reduction but resulted in faster treatment. HC (inlet pressure: 4 bar) + Fenton + Lime scheme was successfully replicated on a pilot-scale resulting in maximum COD reduction of 57.65% within 70 min of treatment time. Overall, it has been concluded that the hybrid oxidative processes as US + Fenton followed by lime treatment is established as the best approach ensuring effective COD reduction at the same time obtaining final colourless/reusable effluent.     

Degradation of imidacloprid containing wastewaters using ultrasound based treatment strategies

The present work deals with application of sonochemical reactors for the treatment of imidacloprid containing wastewaters either individually or in combination with other advanced oxidation processes. Experiments have been performed using two different configurations of sonochemical reactors viz. ultrasonic horn (20 kHz frequency and rated power of 240 W) and ultrasonic bath equipped with radially vibrating horn (25 kHz frequency and 1 kW rated power). The work also investigates the effect of addition of process intensifying agents such as H₂O₂ and CuO, which can enhance the production of free radicals in the system. The combination studies with advanced oxidation process involve the advanced Fenton process and combination of ultrasound with UV based oxidation. The extent of degradation obtained using combination of US and H₂O₂ at optimum loading of H₂O₂ was found to be 92.7% whereas 96.5% degradation of imidacloprid was achieved using the combination of US and advanced Fenton process. The process involving the combination of US, UV and H₂O₂ was found to be the best treatment approach where complete degradation of imidacloprid was obtained with 79% TOC removal. It has been established that the use of cavitation in combination with different oxidation processes can be effectively used for the treatment of imidacloprid containing wastewater.     

Ultrasound-assisted electrochemical treatment for phenolic wastewater

With the rapid development of industry, especially the rapid rise of the chemical industry, the problem of water pollution is becoming more and more serious. Among them, the discharge of organic pollutants represented by phenolic substances has always been at the forefront. In this paper, ultrasound-assisted electrochemical treatment for phenolic wastewater is investigated. The effects of ultrasonic frequency, current, pH value and the amount of fly ash-loaded titanium TiO₂-Fe³⁺ particles on phenol removal from phenol-containing wastewater are investigated. The experimental results demonstrate that the removal rate of phenol in phenol-containing wastewater is the best when ultrasonic frequency is 45 kHz, power is 200 W, the current is 1.2 A, pH is 5 and the dosage of fly ash-loaded titanium TiO₂-Fe³⁺ particles is 3 g. In addition, microwave-assisted-Fenton reagent treatment for phenol wastewater is investigated. The effects of Fenton reagent dosage, initial pH value, microwave power density and radiation time on phenol degradation rate are investigated. The results show that microwave can accelerate the reaction rate, reduce the number of metal ions, save the process cost and reduce the difficulty of post-treatment. Finally, the research status of phenol wastewater treatment technology at the present stage is reviewed, and the future development direction is discussed.     

High frequency ultrasound as a selective advanced oxidation process to remove penicillinic antibiotics and eliminate its antimicrobial activity from water

This work studies the sonochemical degradation of a penicillinic antibiotic (oxacillin) in simulated pharmaceutical wastewater. High frequency ultrasound was applied to water containing the antibiotic combined with mannitol or calcium carbonate. In the presence of additives, oxacillin was efficiently removed through sonochemical action. For comparative purposes, the photo-Fenton, TiO₂ photocatalysis and electrochemical oxidation processes were also tested. Therefore, the evolution of the antibiotic and its associated antimicrobial activity (AA) were monitored. A high inhibition was found for the other three oxidation processes in the elimination of the antimicrobial activity caused by the additives; while for the ultrasonic treatment, a negligible effect was observed. The sonochemical process was able to completely degrade the antibiotic, generating solutions without AA. In fact, the elimination of antimicrobial activity showed an excellent performance adjusted to exponential kinetic-type decay. The main sonogenerated organic by-products were determined by means of HPLC-MS. Four intermediaries were identified and they have modified the penicillinic structure, which is the moiety responsible for the antimicrobial activity. Additionally, the possible oxacillin sonodegradation mechanism was proposed based on the evolution of the by-products and their chemical structure. Furthermore, the high-frequency ultrasound action over 120 min readily removed oxacillin and eliminated its antimicrobial activity. However, the pollutant was not mineralized even after a long period of ultrasonic irradiation (360 min). Interestingly, the previously sonicated water containing oxacillin and both additives was completely mineralized using non-adapted microorganisms from a municipal wastewater treatment plant. These results show that the sonochemical treatment transformed the initial pollutant into substances that are biotreatable with a typical aerobic biological system.     

Performance evaluation of a novel pilot-scale pinned disc rotating generator of hydrodynamic cavitation

This study investigates hydrodynamic performance of a novel pinned disc rotating generator of hydrodynamic cavitation in comparison with a serrated disc variant on a pilot-scale. Experimental results show that at a given rotational speed and liquid flow rate, the pinned disc generates more intense cavitation (i.e. lower cavitation number, higher volume fraction of vapor and higher amplitude of pressure fluctuations) than the serrated disc, while also consuming less energy per liquid pass (i.e., higher flow rate and pumping pressure difference of water at similar power consumption). Additionally, mechanical and chemical wastewater treatment performance of the novel cavitator was evaluated on an 800 L influent sample from a wastewater treatment plant. Mechanical effects resulted in a reduction of average particle size from 148 to 38 µm and increase of specific surface area, while the oxidation potential was confirmed by reduction of COD, TOC, and BOD up to 27, 23 and 30% in 60 cavitation passes, respectively. At optimal operating conditions and 30 cavitation passes, pinned disc cavitator had a 310% higher COD removal capacity while consuming 65% less energy per kg of COD removed than the serrated disc cavitator. Furthermore, the specific COD-reduction energy consumption of the pinned disc cavitator on the pilot scale is comparable to the best cases of lab-scale orifice and venturi devices operating at much lower wastewater processing capacity.     

Wastewater treatment using hybrid treatment schemes based on cavitation and Fenton chemistry: A review

Advanced oxidation processes such as cavitation and Fenton chemistry have shown considerable promise for wastewater treatment applications due to the ease of operation and simple reactor design. In this review, hybrid methods based on cavitation coupled with Fenton process for the treatment of wastewater have been discussed. The basics of individual processes (Acoustic cavitation, Hydrodynamic cavitation, Fenton chemistry) have been discussed initially highlighting the need for combined processes. The different types of reactors used for the combined processes have been discussed with some recommendations for large scale operation. The effects of important operating parameters such as solution temperature, initial pH, initial pollutant concentration and Fenton’s reagent dosage have been discussed with guidelines for selection of optimum parameters. The optimization of power density is necessary for ultrasonic processes (US) and combined processes (US/Fenton) whereas the inlet pressure needs to be optimized in the case of Hydrodynamic cavitation (HC) based processes. An overview of different pollutants degraded under optimized conditions using HC/Fenton and US/Fenton process with comparison with individual processes have been presented. It has been observed that the main mechanism for the synergy of the combined process depends on the generation of additional hydroxyl radicals and its proper utilization for the degradation of the pollutant, which is strongly dependent on the loading of hydrogen peroxide. Overall, efficient wastewater treatment with high degree of energy efficiency can be achieved using combined process operating under optimized conditions, as compared to the individual process.     

Influence of ultrasonication and Fenton oxidation pre-treatment on rheological characteristics of wastewater sludge

The effect of ultrasonication and Fenton oxidation as physico-chemical pre-treatment processes on the change of rheology of wastewater sludge was investigated in this study. Pre-treated and raw sludges displayed non-Newtonian rheological behaviour with shear thinning as well as thixotropic properties for total solids ranging from 10 g/L to 40 g/L. The rheological models, namely, Bingham plastic, Casson law, NCA/CMA Casson, IPC Paste, and power law were also studied to characterize flow of raw and pre-treated sludges. Among all rheological models, the power law was more prominent in describing the rheology of the sludges. Pre-treatment processes resulted in a decrease in pseudoplasticity of sludge due to the decrease in consistency index K varying from 42.4 to 1188, 25.6 to 620.4 and 52.5 to 317.9; and increase in flow behaviour index n changing from 0.5 to 0.35, 0.62 to 0.55 and 0.63 to 0.58, for RS, UlS and FS, respectively at solids concentration 10–40 g/L. The correlation between improvement of biodegradability and dewaterability, decrease in viscosity, and change in particle size as a function of sludge pre-treatment process was also investigated. Fenton oxidation facilitated sludge filterability resulting in capillary suction time values which were approximately 50% of the raw sludges, whereas ultrasonication with high input energy deteriorated the filterability. Biodegradability was also enhanced by the pre-treatment processes and the maximum value was obtained (64%, 77% and 73% for raw, ultrasonicated and Fenton oxidized sludges, respectively) at total solids concentration of 25 g/L. Hence, pre-treatment of wastewater sludge modified the rheological properties so that: (1) the flowability of sludge was improved for transport through the treatment train (via pipes and pumps); (2) the dewaterability of wastewater sludge was enhanced for eventual disposal and; (3) the assimilation of nutrients by microorganisms for further value-addition was increased.     

Intensification of Red-G dye degradation used in the dyeing of alpaca wool by advanced oxidation processes assisted by hydrodynamic cavitation

Red-G dye is one of the main dyes used in the textile industry to dye alpaca wool. Therefore, considering the large volume of processed wool in Perú, the development of efficient technologies for its removal is a present scientific issue. In this study, an integrated system based on hydrodynamic cavitation (HC) and photo-Fenton process was evaluated to remove the Red-G dye. Using a hybrid cavitation device (venturi + orifice plate), the effect of pH was evaluated, achieving 21 % of removal at pH 2 which was more than 80 % higher compared to pH 4 and 6. The effect of temperature was also evaluated in HC-system at pH 2, where percentage of dye degradation increased at lower temperatures (around 20 °C). Then, 50.7 % of dye was removed under optimized condition of HC-assisted Fenton process (FeSO₄:H₂O₂ of 1:30), that value was improved strongly by UV-light incorporation in the HC-system, increasing to 99 % removal efficiency with respect to HC-assisted Fenton process and reducing the time to 15 min. Finally, the developed cavitation device in combination with photo-Fenton process removed efficiently the dye and thus could be considered an interesting option for application to real wastewater.     

Treatment of industrial wastewater effluents using hydrodynamic cavitation and the advanced Fenton process

For the first time, hydrodynamic cavitation induced by a liquid whistle reactor (LWR) has been used in conjunction with the advanced Fenton process (AFP) for the treatment of real industrial wastewater. Semi-batch experiments in the LWR were designed to investigate the performance of the process for two different industrial wastewater samples. The effect of various operating parameters such as pressure, H2O2 concentration and the initial concentration of industrial wastewater samples on the extent of mineralization as measured by total organic carbon (TOC) content have been studied with the aim of maximizing the extent of degradation. It has been observed that higher pressures, sequential addition of hydrogen peroxide at higher loadings and lower concentration of the effluent are more favourable for a rapid TOC mineralization. In general, the novel combination of hydrodynamic cavitation with AFP results in about 60-80% removal of TOC under optimized conditions depending on the type of industrial effluent samples. The combination described herein is most useful for treatment of bio-refractory materials where the diminution in toxicity can be achieved up to a certain level and then conventional biological oxidation can be employed for final treatment. The present work is the first to report the use of a hydrodynamic cavitation technique for real industrial wastewater treatment.     

Performance and energetic analysis of hydrodynamic cavitation and potential integration with existing advanced oxidation processes: A case study for real life greywater treatment

The current work is a “first of a kind” report on the feasibility and efficacy of hydrodynamic cavitation integrated Advanced Oxidation Processes (AOP’s) towards treatment of a real life greywater stream in form of kitchen wastewater. The work has been carried out in a sequential manner starting with geometry optimization of orifice plate (cavitating device) followed by studying the effects of inlet pressure, pH, effluent dilution ratio on degradation of TOC and COD. Under optimized conditions of pH 3, 4 bar pressure, TOC and COD reduction of 18.23 and 25% were obtained using HC for a period of 120 min. To improve the performance of HC, further studies were carried out by integrating H₂O₂ and O₃ with HC. Using 5 g/h optimum dosage of H₂O₂, 87.5% reduction in COD was obtained beyond which it started decreasing. Moreover, integrating O₃ (57.5% reduction in COD) increased the treatment cost. However, a hybrid process (HC + H₂O₂ + O₃) yielded 76.26 and 98.25% reductions in TOC and COD within 60 min. The energetics of all the processes and the treatment costs were studied in detail and it was concluded that combined process of HC + H₂O₂ + O₃ surpassed by far the performances of HC + H₂O₂ and HC + O₃.     

Sonochemical synthesis of Ce-TiO2 nanocatalyst and subsequent application for treatment of real textile industry effluent

Treatment of real textile industry effluent using photocatalysis, sonocatalysis, sonophotocatalysis and H₂O₂ assisted sonophotocatalysis have been studied based on the use of Ce-TiO₂ nanocatalyst synthesized using sonochemical co-precipitation method. Characterization studies of the obtained catalyst revealed crystallite size as 1.44 nm with particles having spherical morphology. A shift of the absorption edge to the visible light range was also observed in UV–Vis diffuse reflectance spectra (UV-DRS) analysis. The effects of different operational parameters viz catalyst dose (0.5 g/L-2 g/L), temperature (30 °C-55 °C) and pH (3–12) on the COD reduction were studied. The reduction in the COD was higher at lower pH and the optimum temperature established was 45 °C. It was also elucidated that the required catalyst dose was lesser in combined sonophotocatalysis when compared with individual photocatalysis and sonocatalysis. Combination of processes and addition of oxidants increased the COD reduction with the sonophotocatalytic oxidation combined with H₂O₂ treatment showing the best results for COD reduction (84.75%). The highest reduction in COD for photocatalysis was only 45.09% and for sonocatalysis, it was marginally higher at 58.62%. The highest reduction in COD achieved by sonophotocatalysis was 64.41%. Toxicity tests coupled with Liquid Chromatography Mass Spectrometry (LC-MS) analysis revealed that there were no additional toxic intermediates added to the system during the treatment. Kinetic study allowed establishing that generalized kinetic model fits the experimental results well. Overall, the combined advanced oxidation processes showed better results than the individual processes with higher COD reduction and lower requirement of the catalyst.     

Sonochemical effectiveness factor (eUS) in the reactors for wastewater treatment by sono-Fenton oxidation: Novel considerations

A comprehensive algorithm was recently proposed for calculation of the sonochemical effectiveness factor and wastewater treatment modeling. The presented approach implies that ultrasound is an auxiliary source of free radicals in Fenton type reactions; introduction of ultrasound represents an enhancement of pollutant degradation rates. The sonochemical effectiveness factor was introduced in kinetic models as the e_US factor (Gr?i? et al., 2012 [1]). As a substantial follow-up, this study presents novel considerations. The e_US factor was modeled as a function of employed frequency, actual cavitation-related power intensity of ultrasound and a portion of the cavitationally active zone, i.e. dimensionless active volume. The effect of temperature was disregarded in the present model considerations. Cavitationally active zone in reactors was determined based on the erosion of aluminum foil, resulting in cone-shaped space arising from transducer.In the present study, sonochemical treatment of industrial wastewater containing HCOONa as organic pollutant was performed using different equipment: ultrasonic baths (UB1, UB2 and UB3), cylindrical reactor with homogenizer (HCR) and three-frequency hexagonal cell, i.e. ultrasonic pilot reactor prototype (PP). Explored frequency range was from 20 to 120 kHz. Homogeneous and heterogeneous Fenton-type sonochemical processes, US/Fe(II)(FeSO₄,aq.)/H₂O₂ and US/Fe(II)(steel-plate)/H₂O₂, respectively, applied to industrial wastewater were investigated in terms of mineralization kinetics. Newly modeled e_US factor was introduced in corresponding kinetic models and the overall model was validated. Kinetic parameters of Fenton process were treated as independent of ultrasound, since e_US factor consists of cavitation-related phenomena responsible for the mineralization rate enhancement. In average, a 21% increase of mineralization efficiency was achieved using a single frequency, while more than 70% increase can be achieved by combining 20, 68 and 120 kHz in PP.     

Role of H2O2 in the fluctuating patterns of COD (chemical oxygen demand) during the treatment of palm oil mill effluent (POME) using pilot scale triple frequency ultrasound cavitation reactor

Palm oil mill effluent (POME) is a highly contaminating wastewater due to its high chemical oxygen demand (COD) and biochemical oxygen demand (BOD). Conventional treatment methods require longer residence time (10–15 days) and higher operating cost. Owing to this, finding a suitable and efficient method for the treatment of POME is crucial. In this investigation, ultrasound cavitation technology has been used as an alternative technique to treat POME. Cavitation is the phenomenon of formation, growth and collapse of bubbles in a liquid. The end process of collapse leads to intense conditions of temperature and pressure and shock waves which assist various physical and chemical transformations. Two different ultrasound systems i.e. ultrasonic bath (37 kHz) and a hexagonal triple frequency ultrasonic reactor (28, 40 and 70 kHz) of 15 L have been used. The results showed a fluctuating COD pattern (in between 45,000 and 60,000 mg/L) while using ultrasound bath alone, whereas a non-fluctuating COD pattern with a final COD of 27,000 mg/L was achieved when hydrogen peroxide was introduced. Similarly for the triple frequency ultrasound reactor, coupling all the three frequencies resulted into a final COD of 41,300 mg/L compared to any other individual or combination of two frequencies. With the possibility of larger and continuous ultrasonic cavitational reactors, it is believed that this could be a promising and a fruitful green process engineering technique for the treatment of POME.     

Shear-induced hydrodynamic cavitation as a tool for pharmaceutical micropollutants removal from urban wastewater

In this study, the removal of clofibric acid, ibuprofen, naproxen, ketoprofen, carbamazepine and diclofenac residues from wastewater, using a novel shear-induced cavitation generator has been systematically studied. The effects of temperature, cavitation time and H₂O₂ dose on removal efficiency were investigated. Optimisation (50 °C; 15 min; 340 mg L⁻¹ of added H₂O₂) resulted in removal efficiencies of 47–86% in spiked deionised water samples. Treatment of actual wastewater effluents revealed that although matrix composition reduces removal efficiency, this effect can be compensated for by increasing H₂O₂ dose (3.4 g L⁻¹) and prolonging cavitation time (30 min). Hydrodynamic cavitation has also been investigated as either a pre- or a post-treatment step to biological treatment. The results revealed a higher overall removal efficiency of recalcitrant diclofenac and carbamazepine, when hydrodynamic cavitation was used prior to as compared to post biological treatment i.e., 54% and 67% as compared to 39% and 56%, respectively. This is an important finding since diclofenac is considered as a priority substance to be included in the EU Water Framework Directive.     

The effects of waste-activated sludge pretreatment using hydrodynamic cavitation for methane production

Disintegration of waste-activated sludge (WAS) is regarded as a prerequisite of the anaerobic digestion (AD) process to reduce sludge volume and increase methane yield. Hydrodynamic cavitation (HC), which shares a similar underlying principle with ultrasonication but is energy-efficient, was employed as a physical means to break up WAS. Compared with ultrasonic (180–3600 kJ/kg TS) and thermal methods (72,000 kJ/kg TS), HC (60–1200 kJ/kg TS) found to consume significantly low power. A synergetic effect was observed when HC was combined with alkaline treatment in which NaOH, KOH, and Ca(OH)₂ were used as alkaline catalysts at pH ranging from 8 to 13. As expected, the production yield of CH₄ gas increased proportionally as WAS disintegration proceeded. HC, when combined with alkaline pretreatment, was found to be a cost-effective substitute to conventional methods for WAS pretreatment.     

Removal of pharmaceuticals from wastewater by biological processes,hydrodynamic cavitation and UV treatment

To augment the removal of pharmaceuticals different conventional and alternative wastewater treatment processes and their combinations were investigated. We tested the efficiency of (1) two distinct laboratory scale biological processes: suspended activated sludge and attached-growth biomass, (2) a combined hydrodynamic cavitation–hydrogen peroxide process and (3) UV treatment. Five pharmaceuticals were chosen including ibuprofen, naproxen, ketoprofen, carbamazepine and diclofenac, and an active metabolite of the lipid regulating agent clofibric acid.Biological treatment efficiency was evaluated using lab-scale suspended activated sludge and moving bed biofilm flow-through reactors, which were operated under identical conditions in respect to hydraulic retention time, working volume, concentration of added pharmaceuticals and synthetic wastewater composition. The suspended activated sludge process showed poor and inconsistent removal of clofibric acid, carbamazepine and diclofenac, while ibuprofen, naproxen and ketoprofen yielded over 74% removal. Moving bed biofilm reactors were filled with two different types of carriers i.e. Kaldnes K1 and Mutag BioChip? and resulted in higher removal efficiencies for ibuprofen and diclofenac. Augmentation and consistency in the removal of diclofenac were observed in reactors using Mutag BioChip? carriers (85% ± 10%) compared to reactors using Kaldnes carriers and suspended activated sludge (74% ± 22% and 48% ± 19%, respectively). To enhance the removal of pharmaceuticals hydrodynamic cavitation with hydrogen peroxide process was evaluated and optimal conditions for removal were established regarding the duration of cavitation, amount of added hydrogen peroxide and initial pressure, all of which influence the efficiency of the process. Optimal parameters resulted in removal efficiencies between 3–70%. Coupling the attached-growth biomass biological treatment, hydrodynamic cavitation/hydrogen peroxide process and UV treatment resulted in removal efficiencies of >90% for clofibric acid and >98% for carbamazepine and diclofenac, while the remaining compounds were reduced to levels below the LOD. For ibuprofen, naproxen, ketoprofen and diclofenac the highest contribution to overall removal was attributed to biological treatment, for clofibric acid UV treatment was the most efficient, while for carbamazepine hydrodynamic cavitation/hydrogen peroxide process and UV treatment were equally efficient.     

Sono-photo-Fenton oxidation of bisphenol-A over a LaFeO3 perovskite catalyst

In this study, oxidation of bisphenol-A (IUPAC name – 2,2-(4,4-dihydroxyphenyl, BPA), which is an endocrine disrupting phenolic compound used in the polycarbonate plastic and epoxy resin industry, was investigated using sono-photo-Fenton process under visible light irradiation in the presence of an iron containing perovskite catalyst, LaFeO₃. The catalyst prepared by sol–gel method, calcined at 500 °C showed a catalytic activity in BPA oxidation using sono-photo-Fenton process with a degradation degree and a chemical oxygen demand (COD) reduction of 21.8% and 11.2%, respectively. Degradation of BPA was studied by using individual and combined advanced oxidation techniques including sonication, heterogeneous Fenton reaction and photo oxidation over this catalyst to understand the effect of each process on degradation of BPA. It was seen, the role of sonication was very important in hybrid sono-photo-Fenton process due to the pyrolysis and sonoluminescence effects caused by ultrasonic irradiation. The prepared LaFeO₃ perovskite catalyst was a good sonocatalyst rather than a photocatalyst. Sonication was not only the effective process to degrade BPA but also it was the cost effective process in terms of energy consumption. The studies show that the energy consumption is lower in the sono-Fenton process than those in the photo-Fenton and sono-photo- Fenton processes.     

Effects of ultrasonic reactor design on sewage sludge disintegration

The impact of ultrasound (US) reactor design on cavitation intensity distribution and disintegration efficiency was studied for sewage sludge pre-treatment, using a US flatbed reactor of variable reaction chamber height (RCH, 20–100 mm). Mapping of cavitation intensity and treatment effects was conducted using (i) hydrophone measurements, (ii) aluminum foil tests, and (iii) soluble chemical oxygen demand (COD) analyses. The overall disintegration efficiency was evaluated based on average COD solubilization. The impact of flow on treatment (in)homogeneity was additionally examined using computational fluid dynamics (CFD). Results of all measurement techniques suggest that small RCHs (20 mm, for instance) enable uniform and intense treatments, while large RCHs, which are subjected to strong sound wave attenuation, entail inhomogeneous treatments where large fractions of substrate are no longer exposed to notable cavitation activity. For instance, COD solubilization (relative to alkaline hydrolysis) measured in the channel center dropped from 6.4% to zero as RCH widened from 20 mm to 100 mm. Flow-through sonication further aggravates treatment inhomogeneity due to the high flow rates in the low-cavitation channel centers. Overall disintegration efficiency declined with increasing RCH, showing a drop in average COD solubilization by 73% from RCH = 20 mm to RCH = 100 mm. The drop correlated with average cavitation noise levels (R² = 0.82), indicating that hydrophone measurements may be a suitable tool for US reactor design optimization. Overall, results suggest that reactor geometry has a critical impact on both treatment (in)homogeneity and treatment efficiency and that equal specific energy inputs do not imply equal US treatments.     

Degradation of 2,4-dinitrophenol using a combination of hydrodynamic cavitation,chemical and advanced oxidation processes

In the present work, degradation of 2,4-dinitrophenol (DNP), a persistent organic contaminant with high toxicity and very low biodegradability has been investigated using combination of hydrodynamic cavitation (HC) and chemical/advanced oxidation. The cavitating conditions have been generated using orifice plate as a cavitating device. Initially, the optimization of basic operating parameters have been done by performing experiments over varying inlet pressure (over the range of 3–6 bar), temperature (30 °C, 35 °C and 40 °C) and solution pH (over the range of 3–11). Subsequently, combined treatment strategies have been investigated for process intensification of the degradation process. The effect of HC combined with chemical oxidation processes such as hydrogen peroxide (HC/H₂O₂), ferrous activated persulfate (HC/Na₂S₂O₈/FeSO₄) and HC coupled with advanced oxidation processes such as conventional Fenton (HC/FeSO₄/H₂O₂), advanced Fenton (HC/Fe/H₂O₂) and Fenton-like process (HC/CuO/H₂O₂) on the extent of degradation of DNP have also been investigated at optimized conditions of pH 4, temperature of 35 °C and inlet pressure of 4 bar. Kinetic study revealed that degradation of DNP fitted first order kinetics for all the approaches under investigation. Complete degradation with maximum rate of DNP degradation has been observed for the combined HC/Fenton process. The energy consumption analysis for hydrodynamic cavitation based process has been done on the basis of cavitational yield. Degradation intermediates have also been identified and quantified in the current work. The synergistic index calculated for all the combined processes indicates HC/Fenton process is more feasible than the combination of HC with other Fenton like processes.     

Degradation of imidacloprid using combined advanced oxidation processes based on hydrodynamic cavitation

The harmful effects of wastewaters containing pesticides or insecticides on human and aquatic life impart the need of effectively treating the wastewater streams containing these contaminants. In the present work, hydrodynamic cavitation reactors have been applied for the degradation of imidacloprid with process intensification studies based on different additives and combination with other similar processes. Effect of different operating parameters viz. concentration (20–60 ppm), pressure (1–8 bar), temperature (34 °C, 39 °C and 42 °C) and initial pH (2.5–8.3) has been investigated initially using orifice plate as cavitating device. It has been observed that 23.85% degradation of imidacloprid is obtained at optimized set of operating parameters. The efficacy of different process intensifying approaches based on the use of hydrogen peroxide (20–80 ppm), Fenton’s reagent (H₂O₂:FeSO₄ ratio as 1:1, 1:2, 2:1, 2:2, 4:1 and 4:2), advanced Fenton process (H₂O₂:Iron Powder ratio as 1:1, 2:1 and 4:1) and combination of Na₂S₂O₈ and FeSO₄ (FeSO₄:Na₂S₂O₈ ratio as 1:1, 1:2, 1:3 and 1:4) on the extent of degradation has been investigated. It was observed that near complete degradation of imidacloprid was achieved in all the cases at optimized values of process intensifying parameters. The time required for complete degradation of imidacloprid for approach based on hydrogen peroxide was 120 min where as for the Fenton and advance Fenton process, the required time was only 60 min. To check the effectiveness of hydrodynamic cavitation with different cavitating devices, few experiments were also performed with the help of slit venturi as a cavitating device at already optimized values of parameters. The present work has conclusively established that combined processes based on hydrodynamic cavitation can be effectively used for complete degradation of imidacloprid.