Mechanism of associative oxygen desorption from Pt(111) surface

Mechanism of the associative desorption of oxygen from the Pt(111) surface has been studied on atomic level by means of DFT/GGA calculations and kinetic Monte Carlo simulations. It has been found that two oxygen adatoms can occur, with sufficient probability, in neighboring on-top sites, which is essential for formation and subsequent evaporation of the oxygen molecule. Monte Carlo simulations have demonstrated effectiveness of this channel for O₂ formation on Pt(111) and strongly support the suggested model of associative desorption from transition metal surfaces.     

Translational energy release in the recombinative desorption of H2 from Ag(111)

We have investigated the recombinative desorption of H₂ from Ag(111) using (2 + 1) REMPI to detect the desorbing molecules. We describe a method for determining the energy released into translational motion normal to the surface over a wide range of surface temperatures. This was achieved by using a weak electric field to disperse the ions, in contrast to the usual field-free method. Calibration and analysis methods are discussed and energy distributions P(E) are reported for H₂ (v=0). Desorption from a 295 K surface shows only a single low-energy peak ( ), whereas the translational energy release is bimodal for desorption from a 580 K surface, with mean desorption energies of approximately 140 meV and 1 eV for the two pathways. Sticking functions are calculated using detailed balance, revealing a large dependence on surface temperature.     

CO adsorption on the reduced RuO2(1 1 0) surface

The O-bridge atoms on a stoichiometric RuO₂(1 1 0) surface were removed by reaction with CO. The resulting reduced surface was then further exposed to CO. By means of thermal desorption spectroscopy and high-resolution electron energy-loss spectroscopy three adsorbed CO states were identified on bridge sites and assigned to double-bonded, single-bonded, and single-bonded species in the vicinity of O-bridge residues, respectively.     

Lateral interactions and nonequilibrium in adsorption and desorption. Part 1. Experimental results for (2 × 2)-(3O + NO)/Ru(0 0 1)

Extending earlier vibrational spectroscopy and thermal desorption measurements on this system, its geometrical structure and its adsorption/desorption kinetics have been investigated in detail. The adsorption and desorption of NO proceed, with little influence on the 3O template, on its (2 × 2) lattice of empty hcp sites. The desorption kinetics, with splitting of the TPD spectra into two peaks, are far from the expected behavior for independent sites. Also, the vibrational band structure shows dispersion beyond dipole-dipole interactions. So, despite the quite large NO-NO distance and their screening by the O atoms, there is clear evidence for static and dynamic lateral interactions which should be extractable from the data. A qualitative analysis suggests that these interactions are due to elastic coupling between the positions and vibrations, respectively, of the O and NO adsorbates. However, quantitative conclusions cannot be drawn directly as the kinetic data cannot be interpreted in a quasiequilibrium approach, as would be the normal procedure, due to the presence of strong nonequilibrium effects. The lack of internal equilibration is presumably caused by slow diffusion. The results are sufficiently complete and detailed to justify the effort of theoretical modeling with the aim to quantitatively describe both the lateral interactions and the nonequilibrium effects.     

Ultrasound-assisted extraction of highly nutritious date sugar from date palm (Phoenix dactylifera) fruit powder: Parametric optimization and kinetic modeling

Alternative sweeteners to white sugar with a lower calorie content and glycemic index obtained through date palm fruits is of great interest to the food industry. In this study, ultrasound-assisted extraction of nutritive sugar from date fruit powder was investigated through Box-Behnken design. A maximum total sugar content (TSC) of 812 mg glucose eq./g of DFP was obtained with a sugar extraction yield (SEY) of 81.40 ± 0.27 % under the following optimal extraction conditions: extraction temperature of 60 °C, extraction time of 30 min, and L/S ratio of 7.6 mL/g. Various modern techniques were used to characterize the obtained extracts and associated residues. The results showed that the extract contained fructose, glucose, and sucrose and had good thermal stability. Furthermore, SEM and TSC analysis revealed that ultrasonic treatment of the biomass improved mass transfer diffusion due to acoustic or ultrasonic cavitation, resulting in a higher sugar yield.     

The dissimilar twins - a comparative, site-selective in situ study of CO adsorption and desorption on Pt(3 2 2) and Pt(3 5 5)

The adsorption and desorption of CO on stepped Pt(3 2 2) = Pt(S)-[5(1 1 1) × (1 0 0)] and Pt(3 5 5) = Pt(S)-[5(1 1 1) × (1 1 1)] were investigated using in situ high-resolution X-ray photoelectron spectroscopy at BESSY II, which allows to clearly distinguish between different step and terrace adsorption sites. For the two surfaces, with the same nominal terrace width of five atomic rows, but different step orientation, significant differences are observed. While for Pt(3 5 5) CO adsorption at steps only occurs at on-top sites, on Pt(3 2 2) both step on-top and bridge sites are occupied, albeit with a significantly lower coverage (0.07 vs. 0.13 ML at 200 K). On both surfaces terrace sites are only occupied when the step sites are almost saturated confirming the enhanced binding energy at step sites. CO adsorbed at the (1 1 1) steps on Pt(3 5 5) is more strongly bound than on the (1 0 0) steps on Pt(3 2 2), which is attributed to the different electronic and geometric structure of the steps. The relative occupation of terrace and step sites at a given coverage remains the same between 120 and 290 K on Pt(3 5 5) K, but shows major changes on Pt(3 2 2), between step on-top and bridge sites as well as terrace on-top and bridge sites. On Pt(3 5 5) a smaller CO terrace coverage is found (0.36 vs. 0.40 ML on Pt(3 2 2) at 200 K), mainly due to the lower occupation of terrace bridge sites. For Pt(3 2 2), an ordered adsorbate phase is deduced from a c(4 × 2)-like LEED pattern, which indicates adsorbate order beyond the extension of a single terrace. A model for this structure is proposed.     

Lateral interactions and nonequilibrium in adsorption and desorption. Part 2. A kinetic lattice gas model for (2 × 2)-(3O + NO)/Ru(0 0 1)

A kinetic lattice gas model is set up to study nonequilibrium effects in thermal desorption caused by limited mobility in the adsorbate. Treating the theoretical desorption spectra as input data we show that nonequilibrium effects must show up when different types of Arrhenius analyses, such as threshold and isosteric methods, are applied. We obtain estimates of the lateral NO interaction energies. The theory developed here has broader applicability beyond the present system.     

A molecular beam study of the adsorption dynamics of CO on Ru(0001), Cu(111) and a pseudomorphic Cu monolayer on Ru(0001)

We have investigated the sticking coefficient of CO on Ru(0001), a pseudomorphic Cu monolayer on Ru(0001), and a fully relaxed Cu(111) multilayer as function of kinetic energy, surface coverage, and surface temperature. At a low kinetic energy of 0.09 eV, the initial sticking coefficients, S₀, on these surfaces are determined to be 0.92, 0.96 and 0.87, respectively. In all cases, a decrease of S₀ with increasing beam energy was observed, yielding values of 0.58, 0.14 and 0.07, respectively, at a kinetic energy of 2.0 eV. For all three surfaces the coverage dependent sticking coefficients, S(Θ), display very characteristic behavior at low kinetic energies: S(Θ) remains more or less constant up to coverages close to saturation, indicative of precursor adsorption kinetics. However, characteristic minima at intermediate coverages are observed, which are correlated to the formation of well ordered adsorbate phases. For high kinetic energies we observe a transition towards a linear decrease of S(Θ) for Ru(0001). In contrast, for the pseudomorphic Cu monolayer and for Cu(111) we find an increase in the sticking coefficients at low coverages, followed by a decrease close to saturation. This behavior is attributed to adsorbate assisted sticking, that is, to a higher sticking coefficient on adsorbate covered regions than on the bare surface. The comparison between the pseudomorphic monolayer and Cu(111) reveals that the CO bond strength to the former is larger by 40%. The initial sticking coefficients for both surfaces are very similar at low kinetic energies; at high kinetic energies, S₀ for the pseudomorphic Cu monolayer is, however, larger by a factor of two.     

First principles calculations of the adsorption of acetylene on the Si(0 0 1) surface at low and full coverage

The adsorption of acetylene on the Si(0 0 1)-c(2 × 4) surface at low and full coverage is studied by first principles density functional calculations using the generalized gradient approximation. For a single acetylene molecule, the most stable configuration corresponds to the di-σ site, on-top of a silicon dimer. This configuration is 0.36 eV more stable than the end-bridge site between two adjacent Si dimers. However, if there are two acetylene molecules, the paired end bridge configuration becomes the most stable. We have also studied the kinetics of the adsorption of a single acetylene molecule. Our calculations show that the reaction is barrier-free for adsorption in the di-σ configuration, while there is an energy barrier of 0.19 eV for adsorption in the end-bridge site. At monolayer coverage, the most stable configuration corresponds to acetylene molecules in the pair-end bridge configuration, in agreement with previous calculations. We have found a noticeable coverage dependence only for the end-bridge site, but not for the di-σ. Our results show that to have an accurate picture of the adsorption of acetylene on the Si(0 0 1) surface, a large unit cell is needed.     

Molecular adsorption and growth of n-butane adlayers on Pt(1 1 1)

The molecular adsorption of n-butane and the growth of n-butane adlayers on Pt(1 1 1) was investigated using molecular beam techniques, temperature-programmed desorption (TPD) and low-energy electron diffraction (LEED). It is found that as the surface coverage of n-butane increases, structural changes occur in the adlayer at surface temperatures near 98 K that are accompanied by changes in the binding energy and mobility of the adsorbed species. The film growth process can be divided into four distinct coverage regimes. At low coverages (θ<0.14 ML, where 1 ML is defined as one butane molecule per Pt atom) a disordered monolayer forms in which the butane molecules prefer to lie parallel to the surface in order to minimize their binding energy. At coverages from 0.14 to 0.20 ML, ordered regions develop within the monolayer in which the butane molecules also lie parallel to the surface. The binding energy in the ordered phase is lower than that in the disordered phase due to repulsive intermolecular interactions. A more densely-packed ordered phase begins to form at 98 K after the low-coverage ordered phase saturates at 0.20 ML. The experimental results suggest that the n-butane molecules tilt away from the surface in the high-coverage ordered phase. Finally, a disordered second layer phase forms after the high coverage ordered phase saturates at 0.35 ML. The molecules in the second layer are very mobile at 98 K and rapidly diffuse to the edges of the beam spot. Interchange of molecules between the second layer and ordered monolayer is found to govern the net rate of second layer diffusion at surface temperatures less than 133 K. The adsorption probability of n-butane on Pt(1 1 1) continuously increases with increasing coverage, with no significant dependencies on the structure of the n-butane adlayer. This finding indicates that the long-range arrangements and molecular orientations of a mobile alkane adlayer have a negligible influence on the intrinsic adsorption dynamics, suggesting that the energy transfer processes that facilitate adsorption are highly localized.     

TiC-和TiN-(001)表面吸附性能的密度泛函理论研究

基于密度泛函理论系统研究了碳化钛(TiC)和氮化钛(TiN)非极性(001)表面吸附气体分子和原子的性能。鉴于这些材料拥有不同的电子结构特征,发现受电子的CO分子或未饱和的O和H原子在TiC(001)和TiN(001)表面吸附于不同的活性位点,而供电子的NH3和H2O气体分子或完全饱和的O2和H2分子仅倾向与两个表面的金属原子位点结合。这些吸附特性可能与此类材料表面的电子结构有关。     

Methods for calculating the desorption rate of molecules from a surface at non-zero coverage: Water on MgO(0 0 1)

We present calculations of the desorption rate of water molecules from MgO(0 0 1) at a range of coverages θ and temperatures T. Our aim is to demonstrate that this can be done without making uncontrollable statistical mechanical approximations, and we achieve this by using the potential of mean force method reported previously. As in our earlier work on desorption of isolated molecules, we use a classical interaction model. We find that correlations between adsorbed molecules greatly increase the simulation time needed to obtain good statistical accuracy, compared with the isolated molecule. The activation energy for desorption varies significantly with coverage. The calculations also yield the chemical potential of adsorbed molecules as a function of θ and T, from which we can deduce the critical temperature and coverage for phase separation of adsorbed molecules.     

A temperature programmed desorption study of the reaction of methylacetylene on Pt(111) and Sn/Pt(111) surface alloys

The adsorption and reaction of methylacetylene (H₃CC≡CH) on Pt(111) and the p(2×2) and

Full-size image

surface alloys were investigated with temperature programmed desorption, Auger electron spectroscopy and low energy electron diffraction. Hydrogenation of methylacetylene to form propylene is the most favored reaction pathway on all three surfaces accounting for ca 20% of the adsorbed monolayer. Addition of Sn to the Pt(111) surface to form these two ordered surface alloys suppresses the decomposition of methylacetylene to surface carbon. The alloy surfaces also greatly increase the amount of reversibly adsorbed methylacetylene, from none on Pt(111) to 60% of the adsorbed layer on the

Full-size image

surface alloy. Methylacetylene reaction also leads to a small amount of desorption of benzene, along with butane, butene, isobutylene and ethylene. There is some difference in the yield of these other reaction products depending the Sn concentration, with the (2×2)-Sn/Pt(111) surface alloy having the highest selectivity for these. Despite previous experiments showing cyclotrimerization of acetylene to form benzene on the Pt–Sn surface alloys, the analogous reaction of methylacetylene on the alloy surfaces was not observed, that is, cyclotrimerization of methylacetylene to form trimethylbenzene. It is proposed that this and the high yield of propylene is due to facile dehydrogenation of methylacetylene because of the relatively weak H–CH₂CCH bond compared to acetylene. The desorption of several C₄ hydrocarbon products at low (<170 K) temperature indicates that some minor pathway involving C–C bond breaking is possible on these surfaces.     

DFT study on dissociative adsorption of SiH4 and GeH4 on SiGe(1 0 0)-2 × 1 surface

SiH₄ and GeH₄ dissociative adsorptions on a buckled SiGe(1 0 0)-2 × 1 surface have been analyzed using density functional theory (DFT) at the B3LYP level. The Ge alloying in the Si(1 0 0)-2 × 1 surface affects the dimer buckling and its surface reactivity. Systematic Ge influences on the reaction energetics are found in SiH₄ and GeH₄ reactions with four dimers of Si^∗-Si, Ge^∗-Si, Ge^∗-Ge, and Si^∗-Ge (∗ denotes the protruded atom). On a half H-covered surface, the energy barriers for silane and germane adsorption are higher than those on the pristine surface. The energy barrier for silane adsorption is higher than the corresponding barrier for germane adsorption. Rate constants are also calculated using the transition-state theory. We conclude that the SiGe surface reactivity in adsorption reaction depends on the Ge presence in dimer form. If the surface Ge is present in form of Ge^∗-Ge, the surface reactivity decreases as the Ge^∗-Ge content increases. If the surface Ge prefers to be in form of Ge^∗-Si at low Ge contents, the surface reactivity increases first, then decreases at high Ge surface contents when Ge^∗-Ge prevails. The calculated rate constant ratio of GeH₄ adsorption on Si^∗-Si over Ge^∗-Ge at 650 °C is 2.1, which agrees with the experimental ratio of GeH₄ adsorption probability on Si(1 0 0) over Si(1 0 0) covered by one monolayer Ge. The experimental ratio is 1.7 measured through supersonic molecular beam techniques. This consistency between calculation and experimental results supports that one monolayer of Ge on Si(1 0 0) exists in form of Ge^∗-Ge dimer.     

An STM investigation of the interaction and ordering of pentacene molecules on the Ag/Si(1 1 1)-(√3×√3)R30° surface

Scanning tunneling microscopy has been used to study the ordering of pentacene (C₂₂H₁₄) molecules on the Ag/Si(1 1 1)-(√3×√3)R30° surface at room temperature. Two solid phases, S1 and S2, are observed at coverages of ∼0.35 monolayer (ML) and ∼1.0 ML respectively. It is shown that the solid phase S1 has a high-order commensurate lattice, Ag/Si(1 1 1)-(25 × 25)-pentacene, containing 75 molecules. The structure of this phase is determined from STM measurements at very low coverages where it is possible to image both the pentacene molecules and the structure of the Ag/Si(1 1 1) substrate. Two adsorption sites are identified, a three-fold hollow site at the centre of a Ag-trimer (CA-site) and a six-fold hollow site at the centre of the hexagonal arrangement of silver atoms (CB-site). A higher pentacene coverage of ∼1 ML lead to a molecular reorganization and forms a new commensurate structure Ag/Si(1 1 1)-(2 × 3)-pentacene, containing two molecules per unit cell. Because low energy electron diffraction patterns were not obtainable for this system, the structure of this second phase is determined by using the bias voltage as a tunable parameter to “focus” on either the molecular film or on the substrate. In this phase adsorption takes place exclusively on the Ag-trimer (CA) site and the CB-site is lost because of strong lateral molecule-molecule interactions. The role of competition between intermolecular and molecule-substrate interactions and the nature of the adsorption sites in determining the structure of the pentacene layers is discussed.     

Transient desorption of HD and D2 molecules from the D/Si(1 0 0) surfaces exposed to a modulated H-beam

We have studied the direct and indirect abstraction of D adatoms by H on the Si(1 0 0) surfaces by employing a pulsed H-beam. Desorptions of HD molecules is found to occur promptly as a result of direct abstraction at the beam on-cycles. In contrast, we find that D₂ desorption induced by adsorption of H atoms, i.e., the so-called adsorption-induced desorption (AID), occurs even at the beam off-cycles. The D₂ rate curves measured with the pulsed-H beam are decomposed into four components characterized with the reaction lifetimes of ?0.005, 0.06 ± 0.01, 0.8 ± 0.1, and 30 ± 5 s. We propose that the fastest and the second fastest AID channels are related to the thermodynamical instability of (1 × 1) dihydride domains locally formed on the (3 × 1) monodeuteride/dideuteride domains. The 0.8 s AID channel is attributed to the desorption occurring at the stage when (3 × 1) monodeuteride/dideuteride domains are built up upon H adsorption onto the (2 × 1) monohydride surface. The 30 s AID path is attributed to the thermal desorption accompanied by the shrinkage of the (3 × 1) domains which were excessively formed during the beam on-cycles on the (2 × 1) monohydride surface. Atomistic mechanisms are proposed for these three AID pathways.     

The effect of ferroelectric polarization on the interaction of water and methanol with the surface of LiNbO3(0 0 0 1)

Water and methanol temperature programmed desorption (TPD) measurements were performed on the positive (c⁺) and negative (c⁻) surfaces of poled ferroelectric lithium niobate (LiNbO₃) single crystals. The results indicate that the molecule-surface interactions are both coverage and polarization-dependent. From a comparison of the TPD spectra for the positive and negative surfaces, it is shown that the desorption temperatures of water and methanol are consistently lower on the negative surface by 15 K and 20 K, respectively. The TPD spectra were simulated using the Polanyi-Wigner equation with a coverage-dependent energy term. These calculations show that the polarization dependence of the desorption temperature is due to a difference in the zero-coverage desorption energies on the two surfaces equal to a few kJ per mole. The mechanism for the polarization effect is explored with in situ pyroelectric voltage measurements, which indicate that a surface voltage of ±2 mV develops in the LiNbO₃(0 0 0 1) samples during TPD measurements. The magnitude of the pyroelectric-induced surface charge is heating rate dependent.     

NO adsorption on the Rh(110) surface: kinetics and composition of the adlayer studied by fast XPS

The adsorption and dissociation of NO on the Rh(110) surface were studied by synchrotron radiation X-ray photoemission spectroscopy at temperatures in the range 210–370 K. The O 1s or N 1s spectra were collected every 14 s while the surface was continuously exposed to a steady NO gas pressure. The difference in the binding energies for the atomic oxygen (O 1s ≤530.2 eV), atomic nitrogen (N 1s 397.2 eV) and molecular upright bonded NO molecules (O 1s ≥531.0 eV and N 1s 400 eV) allowed us to distinguish these surface species and to follow the evolution of the adsorbate layer. In addition to these dominating surface species a new species, characterized by O 1s binding energy of 530.7 eV and N 1s binding energy similar to that of the atomic nitrogen, was detected within a narrow coverage range. This state is tentatively assigned to a “lying down” NO bonding configuration, detectable at the timescale of the measurements. The uptake plots, constructed using the integrated intensity of the deconvoluted O 1s and N 1s spectra, are used to elucidate the effect of the reaction temperature and surface coverage and composition on the kinetics of dissociative and molecular NO adsorption of Rh(110).     

An FTIR study of the bonding of methoxy on Ni(100): effects of coadsorbed sulfur, carbon monoxide and hydrogen

The vibrational spectra of CH₃O_(a), CD₃O_(a), CDH₂O_(a) and CD₂HO_(a) on Ni(100) are analyzed and interpreted in terms of resonances between fundamental modes and either combinations or overtones. Analysis of the symmetry of the modes observed suggests that methoxy binds normal to the surface with C_s symmetry, at least at low coverages. Two distinct vibrational bands emerge in the vibrational spectrum of methoxy in the v(CO) region as the coverage increases which are attributed to bonding in four-fold hollow sites and bridging sites. These bands exhibit blue shifts of about 25 cm⁻¹ with increasing coverage up to the saturation coverage. The vibrational bands in the v(CH) region appear concomitantly at all coverages and shift down 12 cm⁻¹ as the coverage is increased. These shifts are attributed to changes in the metal-oxygen bond which are reflected in changes in the strength of the C---O and C---H bonds. Affects on the bonding also appear to occur with the coadsorption of hydrogen or CO with methoxy. Coadsorption of 0.36 ML hydrogen with 0.04 ML methoxy induces blue shifts of 15 and 7 cm⁻¹ for the v(CO) bands at 949 and 984 cm⁻¹, respectively. Adsorbing 0.43 ML of CO with 0.04 ML methoxy (and 0.04 ML hydrogen) causes a red shift of 20 and 12 cm⁻¹ for these bands. A drastic drop in mode intensities for methoxy when CO is coadsorbed suggests that the methoxy tilts away from the surface normal. Pre-adsorbing sulfur on the Ni(100) surface reduces the amount of methoxy formed from methanol, but the v(CO) methoxy bands are unshifted in frequencies relative to their position for the same methoxy coverage on the clean surface.