Improved direct synthesis of TiO2 catalyst using sonication and its application for the desulfurization of thiophene

TiO₂ catalyst was synthesized in the presence of ultrasound (ultrasonic horn at 20 kHz frequency and 70% duty cycle) at different power (80 W to 120 W) and durations as well as surfactant concentration with an objective of establishing best conditions for achieving lowest particle size of the photocatalyst. Detailed characterization in terms of crystal phase, crystallinity, functional groups and morphology of the photocatalyst has been performed using SEM, XRD and FTIR analysis. It was demonstrated that sonication significantly reduced the particle size with high degree of sphericity and homogeneity as compared to conventionally synthesized TiO₂ with similar crystallinity in both cases. The catalytic performance was subsequently evaluated for the deep desulfurization of thiophene. Different desulfurization approaches including individual US (ultrasonic horn at 20 kHz frequency, 110 W power and 70% duty cycle) and UV irradiations, US/UV, US/UV/H₂O₂, US/UV/TiO₂ and US/UV/H₂O₂/TiO₂ were applied to evaluate the catalytic activity. The best approach was demonstrated as US/UV/H₂O₂/TiO₂ and also activity of catalyst synthesized using ultrasound was much better compared to conventionally synthesized catalyst. The studies related to different model solvents demonstrated lowest reactivity for toluene whereas n-hexane and n-octane resulted in complete desulfurization in 60 min and 50 min treatment respectively. The desulfurization followed pseudo first order reaction kinetics irrespective of the solvent used. Overall the work clearly demonstrated the efficacy of ultrasound in improving the catalyst synthesis as well as desulfurization of thiophene.     

Ultrasound assisted intensification of biodiesel production using enzymatic interesterification

Ultrasound assisted intensification of synthesis of biodiesel from waste cooking oil using methyl acetate and immobilized lipase obtained from Thermomyces lanuginosus (Lipozyme TLIM) as a catalyst has been investigated in the present work. The reaction has also been investigated using the conventional approach based on stirring so as to establish the beneficial effects obtained due to the use of ultrasound. Effect of operating conditions such as reactant molar ratio (oil and methyl acetate), temperature and enzyme loading on the yield of biodiesel has been investigated. Optimum conditions for the conventional approach (without ultrasound) were established as reactant molar ratio of 1:12 (oil:methyl acetate), enzyme loading of 6% (w/v), temperature of 40 °C and reaction time of 24 h and under these conditions, 90.1% biodiesel yield was obtained. The optimum conditions for the ultrasound assisted approach were oil to methyl acetate molar ratio of 1:9, enzyme loading of 3% (w/v), and reaction time of 3 h and the biodiesel yield obtained under these conditions was 96.1%. Use of ultrasound resulted in significant reduction in the reaction time with higher yields and lower requirement of the enzyme loading. The obtained results have clearly established that ultrasound assisted interesterification was a fast and efficient approach for biodiesel production giving significant benefits, which can help in reducing the costs of production. Reusability studies for the enzyme were also performed but it was observed that reuse of the catalyst under the optimum experimental condition resulted in reduced enzyme activity and biodiesel yield.     

Ultrasound assisted enzyme catalyzed synthesis of glycerol carbonate from glycerol and dimethyl carbonate

The present work illustrates the transesterification of glycerol to glycerol carbonate (GlyC) from dimethyl carbonate (DMC) using commercial immobilized lipase (Novozym 435) under ultrasonic irradiation. The experiments were performed in a batch reactor placed in an ultrasonic water bath using a sequence of experimental protocol to evaluate the effects of temperature, molar ratios of substrates, enzyme loading, duty cycle and ultrasound power on the conversion of glycerol to GlyC. It has been found that ultrasound-assisted lipase-catalyzed transesterification of glycerol would be a potential alternative to conventional alkali-catalyzed method, as high conversion (99.75%) was obtained at mild operating conditions: molar ratio of DMC to glycerol 3:1, catalyst amount of 13% (w/w), lower power input (100 W), duty cycle 50% and temperature (60 °C) in a relatively short reaction time (4 h) using Novozym 435 as catalyst. Ultrasound reduces the reaction time up to 4 h as compared to conventional stirring method (14 h) catalyzed by Novozym 435. The repeated use of the catalyst under the optimum experimental condition resulted in decay in both enzyme activity and product conversion.     

Intensified sonochemical degradation of 2-Picoline in combination with advanced oxidizing agents

2-picoline is a very important pyridine derivative with significant applications though it is also poisonous and harmful having considerable adverse influence on aquatic life, environment and organisms. The need for developing effective treatment methodologies for 2-Picoline directed the current work focusing on degradation of 2-Picoline using the combination of ultrasound and advanced oxidants such as hydrogen peroxide (H₂O₂), potassium persulphate (KPS), Fenton’s reagent, and Peroxymonosulphate (PMS) along with the use of Titanium oxide (TiO₂) as catalyst. Ultrasonic bath having 8 L capacity and operating frequency of 40 ± 2 kHz has been used. The effect of parameters like power, initial pH, temperature, time and initial concentration of 2-Picoline were studied to establish best operating conditions which were further used in the combination treatment approaches of ultrasound with oxidising agents. The chemical oxygen demand (COD) reduction for the optimized approaches of ultrasound in combination with oxidizing agents was also determined. Degradation experiments were performed using oxidising agents also in absence of ultrasound to investigate the individual treatment capacity of the oxidants and also the synergetic index for the combination. Kinetic study demonstrated that second order model suited for all the treatment approaches except US/Fenton where first order model fitted better. Ultrasound in combination with Fenton reagent demonstrated a substantial synergy for the degradation of 2-Picoline compared to other treatment approaches showing highest degradation of 97.6 %, synergetic index as 5.71, cavitational yield of 1.82 × 10⁻⁵ mg/J and COD removal of 82.4 %.     

Ultrasound assisted oxidative desulfurization of model diesel fuel

Very stringent environmental regulations have limited the level of sulfur in diesel, therefore deep desulfurization of fuels is required. For that purpose, the frequently used industrial process is hydrodesulfurization (HDS) which enables effective elimination of sulfur compounds such as mercaptanes, thiols, sulfides, disulfides from diesel oil, but removal of thiophene sulfur compounds (benzothiophene, dibenzothiophene, 4,6 dimethyldibenzothiophene) is insufficient. Ultrasound assisted oxidative desulfurization (UAOD) as one of several new technologies enables performance under mild conditions without use of explosive hydrogen. A higher reactivity of thiophene sulfur compounds during UAOD also provides conversion into highly polar sulfoxides and sulfones that are easily removed by adsorption or extraction. Nowadays, different catalyst/oxidants systems are being studied to improve oxidation reaction efficiency and enhance the mass transfer in the interfacial region. In this paper, the effect of reaction temperature (40–70 °C) and oxidation time (5–150 min) for UAOD of model diesel fuel with a catalyst/oxidants system (acetic acid/hydrogen peroxide) was investigated in a 70 ml batch reactor. Furthermore, the effects of different initial concentrations of dibenzothiophene (DBT) and of ultrasound amplitude were additionally examined to achieve efficient sulfur removal. The obtained results indicated that temperature and US amplitude of 70 °C and 80% respectively were efficient for conversion of DBT (sulfur concentration up to 3976.86 ppm). The results indicate a rise in the yield of sulfones at higher temperatures and subsequent extraction with N,N-dimethylformamide conducted after the process of oxidation at different solvent/oil ratio revealed sulfur removal efficiency of 98.35%.     

Excitation wavelength dependence and magnetic field effect on aerosol particle formation from a gaseous mixture of carbon disulphide and glyoxal

Upon excitation of carbon disulphide (CS₂) molecules under UV light irradiation at 313?nm a gaseous mixture of CS₂ and glyoxal deposited sedimentary aerosol particles only. The nucleation process of the aerosol particles was investigated by measuring the He–Ne laser light intensity scattered by the aerosol particles formed under light irradiation at 313?nm, and the chemical structure of the sedimentary particles was analysed by measuring the FT-IR and X-ray photoelectron spectra. On application of a magnetic field of up to 5?T, the nucleation process was decelerated and the chemical species originating from CS₂ were less abundant. The results were compared with those obtained under visible light irradiation at 435.8?nm reported previously. Chemical reactions between CS₂ and glyoxal molecules, which were responsive to the magnetic field, are discussed briefly.     

Carbon nanotubes supported Cu-Ni bimetallic catalysts and their properties for the direct synthesis of dimethyl carbonate from methanol and carbon dioxide

Multi-walled carbon nanotubes (MWCNTs) supported Cu-Ni bimetallic catalysts for the direct synthesis of dimethyl carbonate (DMC) from CH₃OH and CO₂ were synthesized and investigated. The supporting materials and the synthesized catalysts were fully characterized using FTIR, scanning electron microscopy (SEM), transmission electron microscopy (TEM), temperature-programmed reduction (TPR), X-ray diffraction (XRD) and X-ray photoelectron spectrum (XPS) techniques. The catalytic activities were investigated by performing micro-reactions. The experimental results showed that the metal phase and Cu-Ni alloy phase in the catalyst were partially formed during the calcination and activation step. Active metal particles were dispersed homogeneously on the surface of the MWCNTs. Cu-Ni/MWCNTs catalysts were efficient for the direct synthesis of DMC. The highest conversion of CH₃OH was higher than 4.3% and the selectivity of DMC was higher than 85.0% under the optimal catalytic conditions of 120 °C and around 1.2 MPa. The high catalytic activity of Cu-Ni/MWCNTs in DMC synthesis can be attributed to the synergetic effects of metal Cu, Ni and Cu-Ni alloy in the activation of CH₃OH and CO₂, the unique structure of MWCNTs and the interaction between the metal particles and the supports.     

Ultrasound assisted extraction of pectin from waste Artocarpus heterophyllus fruit peel

Four factors three level face centered central composite response surface design was employed in this study to investigate and optimize the effect of process variables (liquid-solid (LS) ratio (10:1–20:1 ml/g), pH (1−2), sonication time (15–30 min) and extraction temperature (50–70 °C)) on the maximum extraction yield of pectin from waste Artocarpus heterophyllus (Jackfruit) peel by ultrasound assisted extraction method. Numerical optimization method was adapted in this study and the following optimal condition was obtained as follows: Liquid-solid ratio of 15:1 ml/g, pH of 1.6, sonication time of 24 min and temperature of 60 °C. The optimal condition was validated through experiments and the observed value was interrelated with predicted value.     

Ultrasound assisted intensified recovery of lactose from whey based on antisolvent crystallization

The current work deals with understanding the fundamental aspects of intensified recovery of lactose from paneer (cottage cheese) whey using the anti-solvent induced sonocrystallization. Ultrasonic horn (22 kHz) with varying power levels over the range of 40–120 W has been used for initial experiments at 100% duty cycle and two different levels of ultrasonic exposure time as 10 min and 20 min. Similar experiments were also performed using ultrasonic bath for the same time of exposure but with at two ultrasonic frequencies (22 kHz and 33 kHz). It was observed that the lactose recovery as well as purity increased with an increase in ultrasonic power at 100% duty cycle for the case of treatment time as 10 min whereas the lactose recovery and purity increased only till an optimum power for the 20 min treatment. In the case of ultrasonic bath, lactose purity increased with an increase in the ultrasonic frequency from 22 kHz to 33 kHz though the lactose recovery marginally decreased. Overall, it was observed that the maximum lactose recovery was ∼98% obtained using ultrasonic horn while the maximum lactose purity was ∼97%. It was also observed that maximum lactose recovery was ∼94% for the case of ultrasonic bath while the maximum lactose purity was ∼92%. The work has enabled to understand the optimized application of ultrasound so as to maximize both the lactose yield and purity during the recovery from whey.     

Ultrasound assisted preparation of calcium alginate beads to improve absorption of Pb+2 from water

Calcium alginate (CaAlg) beads were prepared using ultrasound for use in the removal of lead from natural and wastewaters by ion exchange. Ultrasound was applied in a batch mode with an ultrasonic bath or in a flow mode using an ultrasonic clamp-on device. For comparison purposes the synthesis was performed in batch mode in the absence of the ultrasound. The beads prepared using ultrasound showed a greater ion exchange capability which could be ascribed to a larger specific surface area as a result of surface roughening induced by cavitation.Scanning Electron Microscopy (SEM) images revealed that the roughening was in the form of corrugation for the product with the best ion exchange capability obtained in the flow process where preformed CaAlg droplets were subjected to ultrasound during the setting process. These beads performed 11% better for lead removal than those synthesized in the absence of ultrasound.     

Ultrasound assisted enhancement in natural dye extraction from beetroot for industrial applications and natural dyeing of leather

There is a growing demand for eco-friendly/non-toxic colorants, specifically for health sensitive applications such as coloration of food and dyeing of child textile/leather garments. Recently, dyes derived from natural sources for these applications have emerged as an important alternative to potentially harmful synthetic dyes and pose need for suitable effective extraction methodologies. The present paper focus on the influence of process parameters for ultrasound assisted leaching of coloring matter from plant materials. In the present work, extraction of natural dye from beetroot using ultrasound has been studied and compared with static/magnetic stirring as a control process at 45 °C. The influence of process parameters on the extraction efficiency such as ultrasonic output power, time, pulse mode, effect of solvent system and amount of beetroot has been studied. The use of ultrasound is found to have significant improvement in the extraction efficiency of colorant obtained from beetroot. Based on the experiments it has been found that a mixture of 1:1 ethanol–water with 80 W ultrasonic power for 3 h contact time provided better yield and extraction efficiency. Pulse mode operation may be useful in reducing electrical energy consumption in the extraction process. The effect of the amount of beetroot used in relation to extraction efficiency has also been studied. Two-stage extraction has been studied and found to be beneficial for improving the yield for higher amounts of beetroot. Significant 8% enhancement in % yield of colorant has been achieved with ultrasound, 80 W as compared to MS process both using 1:1 ethanol–water. The coloring ability of extracted beet dye has been tested on substrates such as leather and paper and found to be suitable for dyeing. Ultrasound is also found to be beneficial in natural dyeing of leather with improved rate of exhaustion. Both the dyed substrates have better color values for ultrasonic beet extract as inferred from reflectance measurement. Therefore, the present study clearly offers efficient extraction methodology from natural dye resources such as beetroot with ultrasound even dispensing with external heating. Thereby, also making eco-friendly non-toxic dyeing of fibrous substances a potential viable option.     

Ultrasound assisted extraction (UAE) of bioactive compounds from fruit and vegetable processing by-products: A review

Growing fruit and vegetable processing industries generates a huge amount of by-products in the form of seed, skin, pomace, and rind containing a substantial quantity of bioactive compounds such as polysaccharides, polyphenols, carotenoids, and dietary fiber. These processing wastes are considered to be of negligible value compared to the processed fruit or vegetable due to lack of sustainable extraction technique. Conventional extraction has certain limitations in terms of time, energy, and solvent requirements. Ultrasound assisted extraction (UAE) can extract bioactive components in very less time, at low temperature, with lesser energy and solvent requirement. UAE as a non-thermal extraction technique is better equipped to retain the functionality of the bioactive compounds. However, the variables associated with UAE such as frequency, power, duty cycle, temperature, time, solvent type, liquid-solid ratio needs to be understood and optimized for each by-product. This article provides a review of mechanism, concept, factor affecting extraction of bioactive compounds with particular focus on fruit and vegetable by-products.     

Ultrasound assisted aqueous two-phase extraction of polysaccharides from Cornus officinalis fruit: Modeling,optimization, purification,and characterization

Ultrasound assisted aqueous two-phase extraction of polysaccharides from Cornus officinalis fruit was modeled by response surface methodology (RSM) and artificial neural network (ANN), and optimized using genetic algorithm coupled with ANN (GA-ANN). Statistical analysis showed that the models obtained by RSM and ANN could accurately predict the Cornus officinalis polysaccharides (COPs) yield. However, ANN prediction was more accurate than RSM. The optimum extraction parameters to achieve the highest COPs yield (7.85 ± 0.09)% was obtained at the ultrasound power of 350 W, extraction temperature of 51 ℃, liquid-to-solid ratio of 17 mL/g, and extraction time of 38 min. Subsequently, the crude COPs were further purified via DEAE-52 and Sephadex G-100 chromatography to obtain a homogenous fraction (COPs-4-SG, 33.64 kDa) that contained galacturonic acid, arabinose, mannose, glucose, and galactose in a molar ratio of 34.82:14.19:6.75:13.48:12.26. The structure of COPs-4-SG was also characterized with UV–vis, fourier-transform infrared spectroscopy (FT–IR), atomic force microscopy (AFM), scanning electron microscopy (SEM), Congo-red test, and circular dichroism (CD). The findings provide a feasible way for the extraction, purification, and optimization of polysaccharides from plant resources     

Ultrasound assisted extraction of Maxilon Red GRL dye from water samples using cobalt ferrite nanoparticles loaded on activated carbon as sorbent: Optimization and modeling

In this research, a selective, simple and rapid ultrasound assisted dispersive solid-phase micro-microextraction (UA-DSPME) was developed using cobalt ferrite nanoparticles loaded on activated carbon (CoFe₂O₄-NPs-AC) as an efficient sorbent for the preconcentration and determination of Maxilon Red GRL (MR-GRL) dye. The properties of sorbent are characterized by X-ray diffraction (XRD), Transmission Electron Microscopy (TEM), Vibrating sample magnetometers (VSM), Fourier transform infrared spectroscopy (FTIR), Particle size distribution (PSD) and Scanning Electron Microscope (SEM) techniques. The factors affecting on the determination of MR-GRL dye were investigated and optimized by central composite design (CCD) and artificial neural networks based on genetic algorithm (ANN-GA). CCD and ANN-GA were used for optimization. Using ANN-GA, optimum conditions were set at 6.70, 1.2 mg, 5.5 min and 174 μL for pH, sorbent amount, sonication time and volume of eluent, respectively. Under the optimized conditions obtained from ANN-GA, the method exhibited a linear dynamic range of 30–3000 ng mL⁻¹ with a detection limit of 5.70 ng mL⁻¹. The preconcentration factor and enrichment factor were 57.47 and 93.54, respectively with relative standard deviations (RSDs) less than 4.0% (N = 6). The interference effect of some ions and dyes was also investigated and the results show a good selectivity for this method. Finally, the method was successfully applied to the preconcentration and determination of Maxilon Red GRL in water and wastewater samples.