Facile synthesis and optical property of SnO2 flower-like architectures

Two-dimensional (2D) hierarchical tin dioxide (SnO₂) flower-like architectures consisting of sheet-like nanoparticles have been successfully prepared by a simply mild hydrothermal method based on the reaction between tin foil, NaOH and KBrO₃. The photoluminescence (PL) spectrum exhibit that the flower-like architectures of SnO₂ have strong PL emission, which suggest its possible applications in nanoscaled optoelectronic devices. The formation process of SnO₂ architectures is investigated and the corresponding mechanism is also proposed.     

Instantaneous integration of magnetite nanoparticles on graphene oxide assisted by ultrasound for efficient heavy metal ion retrieval

We fabricated a magnetite nanoparticle-graphene oxide (GO) hybrid via a non-chemical and one-step process assisted by ultrasound in an aqueous solution where the nanoparticle attached to the hydrophobic region on graphite oxide (multi-layered GO) which, at the same time, was exfoliated. Unlike chemical methods such as precipitation, oxygen-containing functional groups on GO have not been consumed or reduced during the hybridization, leading that this hybrid exhibited good water solubility and high adsorption capacity for heavy metal ions such as Pb(II) and Au(III). After the adsorption, the hybrid was instantly collected using a magnet. This method can be useful for hybridizing various nanoparticles with GO.     

Synthesis of flower-like MoS2/CNTs nanocomposite as an efficient catalyst for the sonocatalytic degradation of hydroxychloroquine

Contamination of water resources by pharmaceutical residues, especially during the time of pandemics, has become a serious problem worldwide and concerns have been raised about the efficient elimination of these compounds from aquatic environments. This study has focused on the development and evaluation of the sonocatalytic activity of a flower-like MoS₂/CNTs nanocomposite for the targeted degradation of hydroxychloroquine (HCQ). This nanocomposite was prepared using a facile hydrothermal route and characterized with various analytical methods, including X-ray diffraction and electron microscopy, which results confirmed the successful synthesis of the nanocomposite. Moreover, the results of the Brunauer–Emmett–Teller and diffuse reflectance spectroscopy analyses showed an increase in the specific surface area and a decrease in the band gap energy of the nanocomposite when compared with those of MoS₂. Nanocomposites with different component mass ratios were then synthesized, and MoS₂/CNTs (10:1) was identified to have the best sonocatalytic activity. The results indicated that 70% of HCQ with the initial concentration of 20 mg/L could be degraded using 0.1 g/L of MoS₂/CNTs (10:1) nanocomposite within 120 min of sonocatalysis at the pH of 8.7 (natural pH of the HCQ solution). The dominant reactive species in the sonocatalytic degradation process were identified using various scavengers and the intermediates generated during the process were detected using GC–MS analysis, enabling the development of a likely degradation scheme. In addition, the results of consecutive sonocatalytic cycles confirmed the stability and reusability of this nanocomposite for sonocatalytic applications. Thus, our data introduce MoS₂/CNTs nanocomposite as a proficient sonocatalyst for the treatment of pharmaceutical contaminants.     

Facile synthesis of Co-doped SnS2 as a pre-catalyst for efficient oxygen evolution reaction

Co-doped flower-like SnS₂ was synthesized using a one-step hydrothermal method. The Co content of Co-doped SnS₂ was facilely tuned by controlling the [Co]/[Sn] molar concentration ratio (SC-x; x = 0.05, 0.5, 1.0 2.0, where x indicates the [Co]/[Sn] ratio). The morphology of the samples did not significantly change despite changes in the Co dopant content. Compared to SC-0 (667 mV), SC-0.05 (400 mV), SC-0.5 (382 mV), and SC-1.0 (374 mV), SC-2.0 showed higher catalytic performance, with an overpotential of 323 mV at a current density of 10 mA/cm² in 1 M KOH solution. Moreover, SC-2.0 exhibited high stability for 12 h during chronopotentiometry. SC-2.0 was unexpectedly transformed to weakly crystallized CoOOH nanoparticles after the stability test. The transformation rate from Co-doped SnS₂ to CoOOH was decreased with an increase in the Co content.     

Facile synthesis of nanostructured CuO for low temperature NO2 sensing

Detection of environmental pollutant and health hazardous, nitrogen dioxide (NO₂) is reported using nanostructured CuO particulates (NPs). Powder X-ray diffraction and field emission scanning electron microscopy were used to probe crystalline phase and morphological details, respectively. Small crystallites of ∼10–12 nm and a strain of 4% were found in the leafy structure of CuO. Raman studies further supported the presence of nanosized CuO phase. This is the first instance of utilizing CuO NPs to detect 5 ppm of NO₂ even at a low operating temperature of 50 °C. The highest sensitivity for NO₂ was observed at 150 °C, for the first time, in CuO NPs. A low activation energy of 0.18 eV was found for sensing process. The CuO NPs sensor responded to NO₂ within a few seconds and recovered totally under a minute. The kinetics of the NO₂ gas adsorption on the CuO film surface was described following the Elovich model.     

Facile synthesis of nitrogen-doped reduced graphene oxide as an efficient counter electrode for dye-sensitized solar cells

A nitrogen-doped reduced graphene oxide (N-RGO) nanosheet was synthesized by a simple hydrothermal method and characterized by X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, and scanning electrode microscopy. After being deposited as counter electrode film for dye-sensitized solar cells (DSSCs), it is found that the synthesized N-RGO nanosheet has smaller charge-transfer resistance and better electrocatalytic activity towards reduction of triiodide than the reduced graphene oxide (RGO) nanosheet. Consequently, the DSSCs based on the N-RGO counter electrode achieve an energy conversion efficiency of 4.26%, which is higher than that of the RGO counter electrode (2.85%) prepared under the same conditions, and comparable to the value (5.21%) obtained with the Pt counter electrode as a reference. This N-RGO counter electrode offers the advantages of not only saving the cost of Pt itself but also simplifying the process of counter electrode preparation. Therefore, an inexpensive N-RGO nanosheet is a promising counter electrode material to replace noble metal Pt.

Open image in new window

Graphical abstract A nitrogen-doped reduced graphene oxide nanosheet was synthesized by a simple hydrothermal method, which is a promising counter electrode material to replace noble metal Pt.

     

Ultrasound assisted one pot synthesis of imidazole derivatives using diethyl bromophosphate as an oxidant

A one pot, three-component condensation of benzoin/benzyl, an aldehyde, and ammonium acetate using diethyl bromophosphate as a mild oxidant is achieved to form trisubstituted imidazole compounds. Under ultrasound irradiation, a smooth condensation occurs to get the 2, 4, 5-triaryl-1H-imidazole compounds in good to excellent yields. The study explores the scope and limitation of diethyl bromophosphate as an oxidant and suggests advantages, viz., simplicity of operation, reduction in time, and an increase in product yields.     

V2CN2负载过渡金属双原子电催化固氮的第一性原理研究

电催化剂固氮能够在温和条件下催化氮气还原制氨.本工作基于第一性原理计算,系统地探究了分散在二维V₂CN₂上过渡金属二聚体(Fe, Mo, Ru)形成的双原子催化剂用于电催化固氮的可行性.双原子的协同作用使氮气得到较好的活化.吉布斯自由能计算表明,在V₂CN₂负载双铁原子(Fe₂@V₂CN₂)体系进行的催化反应过电位最低,仅为0.25 eV.进一步的分子动力学计算表明Fe₂@V₂CN₂具有较好的结构稳定性,并且该体系能很好的抑制HER反应的发生.通过与Mo₂@V₂CN₂,Ru₂@V₂CN₂体系的比较可知,氮气分子的吸附构型以及HER反应的竞争对催化剂的选择影响很大.我们的计算能够为双原子催化剂的设计提供更多的依据.     

Carbon-silica composites supported Pt as catalyst for asymmetric hydrogenation of ethyl 2-oxo-4-phenylbutyrate

Mesoporous carbon-silica composites supported Pt nanoparticle catalysts (Pt/MCS) were firstly applied to the heterogeneous asymmetric hydrogenation of ethyl 2-oxo-4-phenylbutyrate (EOPB). A series of different silica contents were investigated in the fabrication of this mesoporous material. When the volume of added tetraethyl orthosilicate (TEOS) during the preparation of composites is 8 mL, Pt/MCS-8 holds carbon and silica as the main components and possesses relatively strong acidity, mesoporous structures with micropores, appropriate Pt nanoparticle size and high dispersibility showing by XRD, XPS, TPD, N₂ sorption and TEM. These properties cause its good catalytic performance in the heterogeneous asymmetric hydrogenation of EOPB with the enantiomeric excess value and conversion up to 85.6% and 97.8%, respectively.     

Facile synthesis of gelatin‐protected silver nanoparticles for SERS applications

Gelatin‐protected silver nanoparticles have been synthesized by a one‐pot, green method for surface‐enhanced Raman scattering (SERS) applications using gelatin as the reducing and stabilizing agent. The gelatin protection on silver nanoparticle surface helps improve its stability greatly and water dispersibility, while retaining high SERS activity of silver nanoparticles. The gelatin‐protected silver nanoparticles showed SERS signals as low as 100 nM of the typical Raman reporter molecules, RuBPY and R6G and 10 μM of other molecules of interest, melamine and folic acid. Copyright © 2013 John Wiley & Sons, Ltd.     

甲烷部分氧化制合成气Pt/Al_2O_3催化剂的表征及其反应性能评价

采用浸渍法制备了3种不同负载量的Pt/Al2O3催化剂,考察了催化剂的甲烷选择氧化性能,并用程序升温还原技术,程序升温脱附技术以及微型脉冲催化色谱技术对催化剂进行表征。结果表明,随着Pt的负载量升高,甲烷催化氧化的性能也越好,对CO与H2的选择性也越高。其中,在750℃原料气组成CH4/O2为2∶1,4%Pt负载量的催化剂,甲烷转化率达到98%以上。     

FTIR sensitivity enhancement on Pt/SiO2/Au layered structures: A novel method for CO adsorption studies on Pt surfaces

Specular reflectance FTIR study of carbon monoxide adsorbed on platinum is performed on Pt/SiO₂/Au layered structures prepared by deposition of thin films on silicon (1 0 0) wafers. The layered structures consist of 5 nm thick platinum films over SiO₂ films of varying thicknesses with 50 nm thick reflecting gold films underneath. Due to optical interference effects, the reflectance of each of these structures varies with the incident infrared wavelength and goes through a minimum at a wavelength that depends on the thickness of the SiO₂ layer. The decrease in the reflectance R causes an effective increase in the ΔR/R value resulting in a large increase in the infrared absorption band intensity of linearly-adsorbed CO. The peak height changes with changing the SiO₂ thickness in the structures and is greatest for the sample which has lowest reflectance near the absorption wavelength of CO (∼2100 cm⁻¹). This improvement in the ratio of FTIR signal to background reflectance can be very useful for probing low surface area model catalytic surfaces at atmospheric pressures and under reaction conditions. A spectrum of CO adsorbed on nanofabricated Pt nanowire catalysts on TiO₂ support is also shown as an example of the sensitivity enhancement on layered structures.     

Novel,fast and efficient one-pot sonochemical synthesis of 2-aryl-1,3,4-oxadiazoles

Ultrasound promoted synthesis of 2-aryl-1,3,4-oxadiazoles at ambient temperature is reported. The remarkable features of the new procedure are shorter reaction time, excellent yields, cleaner reaction profile and simple experimental and workup procedure.     

Facile synthesis of porous CuS film as a high efficient counter electrode for quantum-dot-sensitized solar cells

In this paper, porous CuS film has been successfully prepared by a facile method and employed as a counter electrode (CE) in quantum-dot-sensitized solar cells (QDSSCs) for its highest catalytic activity. This CuS thin film was deposited on FTO substrate via spin coating process which is simple to operate, and its electrochemical properties were further studied by EIS and Tafel measurement. With the cycling time of depositing CuS up to 8, it displays high electrocatalytic activity toward polysulfide reduction, rationalizing the improved QDSSCs performance. Using the CdS/CdSe-sensitized QDSSCs, the cells exhibit improved short-circuit photocurrent density (J _sc) and fill factor (FF), achieving solar cell conversion efficiency (η) as high as 5.60 % under AM 1.5 illumination of 100 mW cm^?2. This work provides a novel and simple method for the preparation of CEs, which could be utilized in other metal sulfides CEs for QDSSCs.     

Studies of sol–gel TiO2 and Pt/TiO2 catalysts for NO reduction by CO in an oxygen-rich condition

The textural properties, morphological features, surface basicity and oxygen reduction behaviours of titania and Pt supported titania catalysts synthesized via a sol–gel method were studied by means of N₂ physisorption, SEM, TEM, CO₂-TPD and H₂-TPR techniques. Mesostructured TiO₂ shows a very narrow pore size distribution that uniformly centred at about 4 nm. High resolution TEM images confirmed that most of Pt particles on Pt/TiO₂-SG had a size smaller than 2 nm. Both the titania support and Pt loaded catalysts chiefly contained weak basic sites with small amount of strong basic sites. Loading Pt did not significantly alter the surface reduction characters of titania, indicating a weak interaction between Pt metals and titania support. Catalytic evaluation revealed that the selectivity of NO reduction over titania was insensitive to variation of textural property. On the bare titania, low NO conversion but high selectivity to N₂O was obtained. However, the Pt/TiO₂-SG catalysts exhibited high NO conversion and high selectivity to N₂, which is assumed to relate to NO dissociation catalysed by the metallic Pt clusters. In addition, when the reaction temperature was above 200 °C, 3–11% NO₂ was yielded over the Pt/TiO₂-SG catalysts, which was discussed on a basis of reaction competition, metal-support interaction and NO dissociation.     

Ultrasound assisted synthesis of amide functionalized metal-organic framework for nitroaromatic sensing

Nano plates of zinc(II) based metal-organic framework (MOF) were prepared via ultrasonic method without any surfactants at room temperature and atmospheric pressure. Control of particle size and morphology was enhanced in this synthesis method. Nano plates of an interpenetrated amide-functionalized metal-organic framework, [Zn₂(oba)₂(bpfb)]·(DMF)₅, TMU-23, (H₂oba = 4,4′-oxybis(benzoic acid); bpfb = N,N′-bis-(4-pyridylformamide)-1,4-benzenediamine, DMF = N,N-dimethyl formamide), was synthesized under ultrasound irradiation in different concentrations of initial precursor. The nano structure and morphology of the synthesized MOF were characterized by Field Emission Scanning Electron Microscopy (FE-SEM), powder X-ray diffraction, thermo gravimetric analysis (TGA), elemental analysis and FTIR spectroscopy. Moreover, Fluorescence emissions of nanoplates have been studied. Amide-functionalized MOF shows high selectivity for sensing of nitroaromatic compounds such as nitrophenol, nitroaniline, and nitrobenzene in acetonitrile solution. Fluorescence intensity decreased with increasing contents of nitroaromatics in acetonitrile solution due to fluorescence quenching effect.     

The effect of different parameters under ultrasound irradiation for synthesis of new nanostructured Fe3O4@bio-MOF as an efficient anti-leishmanial in vitro and in vivo conditions

In this work, a magnetic bio-metal–organic framework (MBMOF) nanocomposite with porous-layer open morphology is synthesized through a simple sonochemical approach and its effects on Leishmania major (MRHO/IR/75/ER) under both in vitro and in vivo conditions are investigated. The effects of sonication time, initial concentration of reagents and sonication power on size and morphology of MBMOF nanocomposites have been investigated and optimized. A comparison was then made between the structural information of the nanostructures and that of the bio-metal–organic framework crystals. Using the powder X-ray diffraction (PXRD), field emission scanning electron microscope (FE-SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), energy dispersive analysis of X-ray (EDAX), vibrating sample magnetometer (VSM), thermogravimetric analysis (TGA), and Brunauer-Emmet-Teller (BET) techniques, the prepared MBMOF nanocomposites were characterized. The mean numbers of promastigotes (cell/ml) in different MBMOF concentrations (3.12, 6.25, 12.5, 25, 50, 100, 200 and 400 µg mL⁻¹) were determined by direct counting after 24, 48 and 72 h. Using MTT assays, the cytotoxic impacts of the MBMOF nanocomposites on promastigotes, intracellular amastigotes, and J774 macrophages were estimated. In order to investigate their therapeutic effects, the prepared MBMOF nanocomposites (25 and 12.5 µg mL⁻¹) were used as ointment three times a week to treat Leishmania major in BALB/c mice. The lesion size and weight of mice were assessed before and during the treatment. The parasitic loads were measured in spleen and liver through the culture. After 72 h, the INF-γ and IL-4 cytokines levels in the supernatant of the spleen culture were measured. To the best of the authors’ knowledge, this study is the first to attempt to synthesize the bio-MOFs through an in-situ sonosynthesis route under ultrasound irradiation and examine their cytotoxicity effects on Leishmania major under in vitro and in vivo conditions.     

Facile synthesis of monodispersed CeO2 nanostructures

CeO₂ nanostructures were successfully prepared by a facile and environmentally friendly mixed-solvothermal method under mild conditions. The X-ray diffraction (XRD) and transmission electron microscope (TEM) results indicated that the as-synthesized products were cubic CeO₂ polycrystalline structures with uniform diameters in the range of 10–20 nm and lengths up to 80 nm. X-ray photoelectron spectroscopy (XPS) spectra and EDX data demonstrated that stoichiometric CeO₂ was formed. A possible growth mechanism of the CeO₂ nanostructures was proposed. Moreover, ultraviolet absorption measurement revealed the band gap of the CeO₂ nanorods was estimated to be 3.85 eV, which is larger than the reported value for the bulk CeO₂ (E_g=3.2 eV). Enhancement of the band gap of the CeO₂ nanorods is attributed to the well-known quantum size effect.     

Facile synthesis and capacitive performance of the Co(OH)2 nanostructure via a ball-milling method

Co(OH)₂ nanoparticles were synthesized using only CoSO₄·7H₂O and NaOH as reactants without other auxiliary reagents via a simple, low-cost and practical ball-milling technique and investigated as the active electrode materials for supercapacitors. The structure and morphology of the resulting Co(OH)₂ samples were examined by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy and transmission electron microscopy (TEM). The observations revealed the formation of brucite-like phase of β-Co(OH)₂, which had an irregular sphere-like shape with an average size of 50-100 nm. When investigated as electrode materials for supercapacitors, the β-Co(OH)₂ exhibited good energy-storage performances in terms of high specific capacitance of 599 F g⁻¹ and excellent capacity retention, suggesting its potential application in the electrode material for supercapacitors.