Ultrasonic-assisted ozone degradation of organic pollutants in industrial sulfuric acid

In this work, a combination of ozone (O₃) and ultrasound (US) has been firstly used to decolorize black concentrated sulfuric acid with high organic content. The effect of different reaction factors on the transparency, extent of decolorization, H₂SO₄ mass fraction, and organic pollutants removal is studied. In addition, the systematic interaction between ultrasound and ozone on the decolorization process is reviewed through comparative experiments of O₃, US and US/O₃. A sulfuric acid product that meets the requirements for first-class products in national standards, with an extent of decolorization of 74.07%, transparency of 70 mm, and a mass fraction of 98.04%, is obtained under the optimized conditions. Under the same conditions, it has been established that the treatment time can be saved by 25% using the US/O₃ process compared to using O₃. Further, the production of oxidative free radicals (•OH) in a concentrated sulfuric acid system is enhanced using the US/O₃ process compared with O₃. In addition, the degree of effectiveness of different oxidizing components on the decolorization process is revealed by adding different free radical shielding agents when the US/O₃ process is used.     

A critical review on the sonochemical degradation of organic pollutants in urine,seawater, and mineral water

Substances such as pharmaceuticals, pesticides, dyes, synthetic and natural hormones, plasticizers, and industrial chemicals enter the environment daily. Many of them are a matter of growing concern worldwide. The use of ultrasound to eliminate these compounds arises as an interesting alternative for treating mineral water, seawater, and urine. Thereby, this work presents a systematic and critical review of the literature on the elimination of organic contaminants in these particular matrices, using ultrasound-based processes. The degradation efficiency of the sonochemical systems, the influence of the nature of the pollutant (volatile, hydrophobic, or hydrophilic character), matrix effects (enhancement or detrimental ability compared to pure water), and the role of the contaminant concentration were considered. The combinations of ultrasound with other degradation processes, to overcome the intrinsic limitations of the sonochemical process, were considered. Also, energy consumptions and energy costs associated with pollutants degradation in the target matrices were estimated. Moreover, the gaps that should be developed in future works, on the sonodegradation of organic contaminants in mineral water, seawater, and urine, were discussed.     

Ultrasound for the remediation of contaminated waters with persistent organic pollutants: A short review

The rising amount of persistent organic contaminants released into water reservoirs in the last years became a cause of concern for the industry, academy, and public administration, due to their bioaccumulation, mutagenicity, and photosynthesis reduction. Therefore, the search for processes that efficiently remove such contaminants became of primary importance. In this context, ultrasound (US) is one of the most promising and economically viable alternatives to degrade organic pollutants in varied environments. Whereas the use of other advanced oxidation processes (AOPs), such as Fenton and photocatalysis, has been widely reported for this purpose, only a few papers deal with ultrasound application as a possible AOP. In this review, a general overview of ultrasound is provided, covering the last twenty years. It includes fundamental aspects of ultrasound and applications, individually or combined with other AOPs, to deplete organic pollutants from various classes in an aqueous environment. Finally, the review concludes by indicating that additional research should be conducted worldwide to explore the full potential of ultrasound as a useful AOP.     

A review on heterogeneous sonocatalyst for treatment of organic pollutants in aqueous phase based on catalytic mechanism

Heterogeneous sonocatalysis, as an emerging advanced oxidation process (AOP), has shown immense potential in water treatment and been widely demonstrated to remove persistent organic compounds in the past decade. The present article aims to provide a comprehensive review on the development of a heterogeneous catalyst for enhancing the ultrasonic degradation rate of organic pollutants from a viewpoint of sonocatalytic mechanism. The rational design and fundamentals for preparing sonocatalysts are presented in the context of facilitating the heterogeneous nucleation and photo-thermal-catalytic effects as well as considering the mechanical stability and separation capacity of the heterogeneous catalyst. In addition, some new trends, ongoing challenges and possible methods to overcome these challenges are also highlighted and proposed.     

超声处理有机废水的现状与进展

从超声降解有机废水的机理入手,对当前单频和多频(二维正交和三维)超声以及超声技术与其他技术联用降解污水的原理、影响因素和效果和国内外研究现状进行了总结和回顾,同时对该技术在处理有机废水方面的研究趋势进行了展望。     

Mechanistic insight into sono-enzymatic degradation of organic pollutants with kinetic and thermodynamic analysis

In this paper, we have attempted to get a physical insight into process of sono-enzymatic treatment for degradation of recalcitrant organic pollutants. Decolourization of an azo dye has been used as model reaction with different experimental protocols that alter characteristics of ultrasound and cavitation phenomena in the system. Experimental data is analyzed to determine kinetic and thermodynamic parameters of decolorization process. The trends observed in kinetic and thermodynamic parameters of decolourization are essentially manifestations of the dominating mechanism of the decolorization of the textile dye (or nature of prevalent chemical reaction in the system), viz. either molecular reaction due to enzyme or radical reaction due to transient cavitation. The activation energy for sonochemical protocol is negative, which indicates instantaneity of the radical reactions. The frequency factor is also low, which is attributed to high instability of radicals. For enzymatic and sono-enzymatic protocols, activation energy is positive with higher frequency factor. Enthalpy change for sonochemical protocol is negative, while that for enzymatic and sono-enzymatic protocols is positive. The net entropy change for sonochemical protocol is more negative than enzymatic or sono-enzymatic protocol due to differences in prevalent chemical mechanism of dye decolorization. Due to inverse variations of frequency factor and activation energy, marginal rise in reaction kinetics is seen for sono-enzymatic protocol, as compared to enzymatic treatment alone. Due to inverse variations of enthalpy and entropy change, net Gibbs energy change in all experimental protocols shows little variation indicating synergism of the mechanism of ultrasound and enzyme.     

High vis-light photocatalytic property of g-C3N4 on four pollutants (RhB,MB, TC-HCl and P-Nitrophenol)

The g-C₃N₄ nanosheets were synthesized by a multistage program calcination with different heating rate, which was an easy, low-cost, and quick method. The morphology and structure of samples were characterized by various techniques. The performance evaluation of the samples was tested by degrading Rhodamine B, Methylene Blue, Tetracycline Hydrochloride and P-Nitrophenol in visible light. The results show that the photodegradation properties of TP-g-C₃N₄ prepared by multistage program calcination are the best than others. In particular, the degradation rate of TP-g-C₃N₄ to Rhodamine B reached 99.6% in just 4 min. TP-g-C₃N₄ catalyst has excellent stability and recycling performance. According to free radical capture experiments, •O₂⁻ may be the main active species for pollutant degradation. The possible photocatalytic degradation mechanism was also discussed. Due to the high specific surface area and a narrow band gap, the TP-g-C₃N₄ becomes a promising photocatalyst.     

Biosynthesis of gold nanoparticles by Aspergillum sp. WL-Au for degradation of aromatic pollutants

A simple method for synthesis of gold nanoparticles (AuNPs) using Aspergillum sp. WL-Au was presented in this study. According to UV–vis spectra and transmission electron microscopy images, the shape and size of AuNPs were affected by different parameters, including buffer solution, pH, biomass and HAuCl₄ concentrations. Phosphate sodium buffer was more suitable for extracellular synthesis of AuNPs, and the optimal conditions for AuNPs synthesis were pH 7.0, biomass 100 mg/mL and HAuCl₄ 3 mM, leading to the production of spherical and pseudo-spherical nanoparticles. The biosynthesized AuNPs possessed excellent catalytic activities for the reduction of 2-nitrophenol, 3-nitrophenol, 4-nitrophenol, o-nitroaniline and m-nitroaniline in the presence of NaBH₄, and the catalytic rate constants were calculated to be 6.3×10⁻³ s⁻¹, 5.5×10⁻³ s⁻¹, 10.6×10⁻³ s⁻¹, 8.4×10⁻³ s⁻¹ and 13.8×10⁻³ s⁻¹, respectively. The AuNPs were also able to catalyze the decolorization of various azo dyes (e.g. Cationic Red X-GRL, Acid Orange II and Acid scarlet GR) using NaBH₄ as the reductant, and the decolorization rates reached 91.0–96.4% within 7 min. The present study should provide a potential candidate for green synthesis of AuNPs, which could serve as efficient catalysts for aromatic pollutants degradation.     

Sonochemical processes for the degradation of antibiotics in aqueous solutions: A review

Antibiotic residues in water are general health and environmental risks due to the antibiotic-resistance phenomenon. Sonication has been included among the advanced oxidation processes (AOPs) used to remove recalcitrant contaminants in aquatic environments. Sonochemical processes have shown substantial advantages, including cleanliness, safety, energy savings and either negligible or no secondary pollution. This review provides a wide overview of the different protocols and degradation mechanisms for antibiotics that either use sonication alone or in hybrid processes, such as sonication with catalysts, Fenton and Fenton-like processes, photolysis, ozonation, etc.     

Ultrasonic degradation of oxalic acid in aqueous solutions

This paper describes the ultrasonic degradation of oxalic acid. The effects of ultrasonic power, H₂O₂, NaCl, external gases on the degradation of oxalic acid were investigated. Reactor flask containing oxalic acid was immersed in the ultrasonic bath with water as the coupling fluid. Representative samples withdrawn were analysed by volumetric titration. Degradation degree of oxalic acid increased with increasing ultrasonic power. It was observed that H₂O₂ has negative contribution on the degradation of oxalic acid and there was an optimum concentration of NaCl for enhancing the degradation degree of oxalic acid. Although bubbling nitrogen gave higher degradation than that for bubbling air, both gases (for 20 min before sonication and during sonication together) could not help to enhance the degradation of oxalic acid when compared with the degradation without gas passage.     

Preparation of organic/inorganic hybrid nanocomposites by ultraviolet irradiation and their packaging applications for organic optoelectronic devices

By ultraviolet (UV)-assisted synthetic procedure, we have successfully prepared several UV curable organic/inorganic hybrid nanocomposites with excellent gas barrier capabilities, moderate hardness, and good adhesive strength. The experimental results reveal that the physical properties of nanocomposites depend on their chemical structures. Therefore, introduction of silicone and polyurethane (PU) into the Acrylics backbone dramatically raises the adhesive strength as well as refractive index and lowers the gas penetration. Furthermore, we have also applied lab-made nanocomposite g for the encapsulation of organic optoelectronic devices such as OLEDs, flexible OLEDs, and organic solar cells. With the package of lab-made nanocomposite g, the organic optoelectronic devices effectively resist the entry of moisture and oxygen in the air, extending the lifetimes.     

A parametric review of sonochemistry: Control and augmentation of sonochemical activity in aqueous solutions

In this review the phenomenon of ultrasonic cavitation and associated sonochemistry is presented through system parameters. Primary parameters are defined and considered, namely; pressure amplitude, frequency and reactor design; including transducer type, signal type, vessel-transducer ratio, liquid flow, liquid height, liquid temperature and the presence of a reflective plate. Secondary parameters are similarly characterised and involve the use of gas and liquid additives to influence the chemical and physical environments. Each of the parameters are considered in terms of their effect on bubble characteristics and subsequent impact on sonochemical activity. Evidence suggests that via parametric variation, the reaction products and efficiency may be controlled. This is hypothesised to occur through manipulation of the structural stability of the bubble.     

Sonolytic degradation of hazardous organic compounds in aqueous solution

Benzene, chlorobenzene, 1,2-, 1,3-, 1,4-dichlorobenzene, biphenyl, and polychlorinated biphenyls such as 2-, 4-chlorobiphenyl and 2,2′-dichlorobiphenyl in aqueous solutions have been subjected to sonolysis with 200 kHz ultrasound at an intensity of 6 W cm⁻² under an argon atmosphere. 80–90% of initial amount of these compounds were degraded by 30–60 min of sonication when the initial concentrations were 10–100 μmol l⁻¹. The degradation rate of these compounds increased with increase in their vapor pressures. In all cases of sonolysis of chlorinated organic compounds, an appreciable amount of liberated chloride ion was observed.     

Sonozonation: Enhancing the antimicrobial efficiency of aqueous ozone washing techniques on cherry tomato

Ultrasound requires high power and longer treatment times to inactivate microorganisms when compared to ultrasound combined with other technologies. Also, the antimicrobial efficiency of aqueous ozone increases with an increase in its concentration and exposure time, but with a detrimental effect on the quality of the treated food. In this study, the effect of aqueous ozone at low concentration, multi-mode frequency irradiation and their combination on microbial safety and nutritional quality of cherry tomato was investigated. Individual washing with aqueous ozone and mono-mode frequency irradiation resulted in <1 log CFU/g reduction in the spoilage microorganisms, while dual-mode frequency irradiation (DMFI) resulted in higher microbial reduction (1.3–2.6 1 log CFU/g). The combined system (20/40 kHz + aqueous ozone) on the other hand, resulted in >3 log CFU/g microbial reduction. The application of DMFI enhanced the antimicrobial efficiency of aqueous ozone without any detrimental effect on the physicochemical properties (except the firmness), bioactive compounds, and antioxidants of the cherry tomato during 21 days refrigerated storage. The result obtained indicates the promising substitute to the single washing technique for microbial safety as well as preserving the nutritional quality and enhancing the shelf life of cherry tomato.     

Enhanced sonocatalytic degradation of organic dyes from aqueous solutions by novel synthesis of mesoporous Fe3O4-graphene/ZnO@SiO2 nanocomposites

Fe₃O₄-graphene/ZnO@mesoporous-SiO₂ (MGZ@SiO₂) nanocomposites was synthesized via a simple one pot hydrothermal method. The as-obtained samples were investigated using various techniques, as follows: scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and specific surface area (BET) vibrating sample magnetometer (VSM), among others. The sonocatalytic activities of the catalysts were tested according to the oxidation for the removal of methylene blue (MB), methyl orange (MO), and rhodamine B (RhB) under ultrasonic irradiation. The optimal conditions including the irradiation time, pH, dye concentration, catalyst dosage, and ultrasonic intensity are 60 min, 11, 50 mg/L, 1.00 g/L, and 40 W/m², respectively. The MGZ@SiO₂ showed the higher enhanced sonocatalytic degradation from among the three dyes; furthermore, the sonocatalytic-degradation mechanism is discussed. This study shows that the MGZ@SiO₂ can be applied as a novel-design catalyst for the removal of organic pollutants from aqueous solutions.     

A new sono-electrochemical method for enhanced detoxification of hydrophilic chloroorganic pollutants in water

A new method for detoxification of hydrophilic chloroorganic pollutants in effluent water was developed, using a combination of ultrasound waves, electrochemistry and Fenton's reagent. The advantages of the method are exemplified using two target compounds: the common herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) and its derivative 2,4-dichlorophenol (2,4-DCP). The high degradation power of this process is due to the large production of oxidizing hydroxyl radicals and high mass transfer due to sonication. Application of this sono-electrochemical Fenton process (SEF) treatment (at 20 kHz) with quite a small current density, accomplished almost 50% oxidation of 2,4-D solution (300 ppm, 1.2 mM) in just 60 s. Similar treatments ran for 600 s resulted in practically full degradation of the herbicide; sizable oxidation of 2,4-DCP also occurs. The main intermediate compounds produced in the SEF process were identified. Their kinetic profile was measured and a chemical reaction scheme was suggested. The efficiency of the SEF process is tentatively much higher than the reference degradation methods and the time required for full degradation is considerably shorter. The SEF process maintains high performance up to concentrations which are higher than reference methods. The optimum concentration of Fe²⁺ ions required for this process was found to be of about 2 mM, which is lower than that in reference techniques. These findings indicate that SEF process may be an effective method for detoxification of environmental water.     

Enhanced mechanism of catalytic ozonation by ultrasound with orthogonal dual frequencies for the degradation of nitrobenzene in aqueous solution

The experiments have been performed with a semi-continuous batch reactor to investigate the degradation efficiency of nitrobenzene in aqueous solution by ultrasound with the different orthogonal dual frequencies catalytic ozonation. The introduction of ultrasound can enhance the degradation efficiency of nitrobenzene compared to the results obtained from the processes of ozonation alone and ultrasound alone. The degradation of nitrobenzene is found to be zero-order in the two systems of ultrasound alone, and the reactions follow the pseudo-first-order kinetic model in the processes of ozone alone and ozone/ultrasound. The investigation confirms that the degradation of nitrobenzene follows the mechanism of hydroxyl radical (^•OH) oxidation, and the enhancement function is even more pronounced in the presence of ultrasound with the greater difference between the orthogonal dual frequencies due to the obvious synergetic effect between ozone and ultrasound, which increases the utilization efficiency of ozone, and accelerates the initiation of ^•OH and the formation of H₂O₂, resulting in the rapid formation of an increasing diversity of byproducts and the advancement degree of mineralization of total organic carbon (TOC). The oxidative byproducts have been, respectively identified in the different processes selected, including o, p, m-nitrophenols, phenol, malonic acid, 4-nitrocatechol, nitrate ion, maleic acid, oxalic acid, hydroquinone, p-quinone, 1,2,3-trihydroxy-5-nitrobenzene and acetic acid.     

Effects and mechanism of diclofenac degradation in aqueous solution by US/Zn0

A system of ultrasound radiation coupled with Zn⁰ was applied to degrade diclofenac. The effects of initial pH, dosage of Zn⁰ and ultrasound density were investigated. To further explore the mechanism of the microcosmic reaction, the fresh and used Zn⁰ powders were characterized by SEM, XRD and XPS. Radical scavengers were used to determine the oxidation performance of strong oxidizing free radicals on diclofenac, including hydroxyl radicals and superoxide radicals. The results showed that the optimum removal of diclofenac reached to over 85% at pH of 2.0 in 15 min, with Zn⁰ dosage of 0.1 g/L and ultrasound density of 0.6 W/cm³. TOC removal of 72.6% in 15 min and dechlorination efficiency of diclofenac reached 70% in 30 min. Characterization results showed that a ZnO membrane was generated on the surface of Zn particles after use. According to the mass spectrometry results, several possible pathways of diclofenac degradation were proposed, and most diclofenac was turned into micro-molecules or CO₂ finally. The synergistic effect of US/Zn⁰ in the reactions led to a proposed degradation mechanism in which zinc could directly attack the target contaminant diclofenac because of its good reducibility with the auxiliary functions of ultrasonic irradiation, mechanical shearing and free radical oxidation.     

Sonozonation (sonication/ozonation) for the degradation of organic contaminants – A review

Ozonation (OZ) is an important advanced oxidation process to purify water and wastewater. Because of the lower solubility and instability of ozone (O₃), selective oxidation and dependence on pH value, the industrial applications of OZ have been hindered by the following disadvantages: incomplete removal of pollutants, lower mineralization efficiency and the formation of toxic by-products. Meanwhile, OZ seems to have higher processing costs than other technologies. To improve the treatment efficiency and O₃ utilization, several combined processes, such as H₂O₂/O₃, UV/O₃, and Cavitation/O₃, have been explored, while the combined method of ultrasonication (US) with OZ is a promising treatment technology with a complex physicochemical mechanism. In US alone, the sonolysis of water molecules can produce more powerful unselective oxidant hydroxyl radicals (OH), and directly cause the sonochemical pyrolysis of volatile pollutants. In US/OZ, US can promote the mass transfer of O₃, and also drive the chemical conversion of O₃ to enhance the formation of OH. Various layouts of US/OZ devices and the interactive effects of US/OZ (synergism or antagonism) on the degradation of various organics are illustrated in this review. The main factors, including US frequency, pH value, and radical scavengers, significantly affect the mass transfer and decomposition of O₃, the formation of OH and H₂O₂, the degradation rates of organics and the removal efficiencies of COD and TOC (mineralization). As a result, US can significantly increase the yield of OH, thereby improving the degradation efficiency and mineralization of refractory organics. However, US also enhances the decomposition of ozone, thereby reducing the concentration of O₃ in water and impairing the efficiency of selective oxidation with O₃ molecules.     

A review on textile sonoprocessing: A special focus on sonosynthesis of nanomaterials on textile substrates

The chemical and physical effects of ultrasound with a frequency above 16 kHz, higher than the audible frequency of the human ear, have proven to be a useful tool for variety of systems ranging from the application of ultrasound in environmental remediation to the cooperation of ultrasound waves with chemical processing regarding as sonochemistry. Ultrasound opened up new advances in textile wet processing including desizing, scouring, bleaching, dyeing, printing and finishing and also nanoprocessing including nanopretreatment, nanodyeing, nanoprinting and nanofinishing. Use of ultrasound appears to be a promising alternative technique to reduce energy, chemicals and time involved in various operations. Over the past years there has been an enormous effort on using sonochemistry for the synthesis of nanomaterials on various textile materials. In situ sonosynthesis of nanoparticles and nanocomposites on different textiles is a pioneering approach driving future investigations. With such wide range of applications and vast ever increasing publications, the objective of this paper is presenting a comprehensive review on ultrasound application in textile from early time to now by the main emphasis on the sonosynthesis of nanomaterials outlining directions toward future research.