Development of a voltammetric method for the determination of iron(III) in Zn-Fe alloy galvanic baths

A square wave voltammetric method whith a static mercury drop electrode (SMDE) was developed for the quantitative determination of iron (III) in Zn-Fe alloy galvanic baths. Real alloy bath samples were analyzed by the standard addition method and recovery tests were carried out. 0.50 mol L^–1 sodium citrate (pH 6.0) or 0.20 mol L^–1 oxalic acid (pH 4.0) were applied as supporting electrolytes resulting in both cases in a peak potential of about –0.20 V vs. Ag|AgCl (saturated KCl). The iron (III) concentration in the alloy bath was 9.0 × 10^–4 mol L^–1. A good correlation (r = 0.9999) was achieved between the iron (III) concentration and the peak current in the electrolytes studied, with linear response ranges from 1.0 × 10^–6 to 1.2 × 10^–4 mol L^–1. Interference levels for some metals such as copper (II), lead (II), chromium (III) and manganese (II) that can hinder the Zn-Fe alloy deposition were evaluated; only copper (II) interferes seriously. Received: 4 April 2000 / Revised: 19 June 2000 / Accepted: 22 June 2000     

Separation and determination of trace amounts of aluminium(III), vanadium(V), iron(III), copper(II) and nickel(II) with CALKS and PAR by RP-HPLC.

An RP-HPLC method for the separation and determination of aluminium(III), vanadium(V), iron(III), copper(II) and nickel(II) with CALKS (Chromazol KS) and PAR ([4-(2-pyridylazo)resorcinol]) chelating on a YWG-ODS column was developed. A mixture of methanol-tetrahydrofuran(THF)-water (60:5:35 v/v) containing 0.2 mol/L LiCl, 5 x 10(-5) mol/L CALKS, 5 x 10(-5) mol/L PAR and acetate buffer solution (pH 4.9) was selected as mobile phase. The method has high sensitivity, with the detection limits being 6 ng/mL for aluminium(III), 3.5 ng/mL for vanadium(V), 10.4 ng/mL for iron(III), 6.3 ng/mL for copper(II) and 8.7 ng/mL for nickel(II). It also has good selectivity, so that most foreign metal ions do not interfere under the optimum conditions. The method can be applied to the simultaneous determination of trace amounts of aluminium, vanadium, iron, copper and nickel in rice and flour samples.     

Chemical reduction and spectrophotometric determination of silver, copper and nickel

Silver(I), copper(II) and nickel(II) can be reduced to the metallic state by formaldehyde at pH 11, chromium(II) in 2.5M sulphuric acid, and borohydride at pH 5.5-6.0, respectively. Reoxidation of these metals with iron(III) in the presence of Ferrozine enables their determination at concentration below 1 mug/ml by measurement of the absorbance of the iron(II)-Ferrozine complex at 562 nm, with a precision better than 3%. The apparent molar absorptivities for silver, copper and nickel are 2.78 x 10(4), 5.56 x 10(4) and 5.58 x 10(4) l.mole(-1).cm(-1), respectively. The average thickness of silver films on glass surfaces can be determined in the way.     

Chemiluminescence investigation of NH(2)OH-fluorescein-Cu(2+) system and its application to copper analysis in serum

A novel chemiluminescent system, fluorescein-NH(2)OHOH(-), was developed for the determination of copper(II) in serum. A weak light emission arises from hydroxylamine in the presence of the organic reagent fluorescein in basic aqueous solution. Under the conditions of 1.2 x 10(-3) mol l(-1) NH(2)OH and 5 x 10(-3) mol l(-3) fluorescein, the light intensity is linearly dependent upon the concentration of copper(II) within the range 1-20 ppb. The relative standard deviation of the determination of copper(II) is 4.2% (n = 13) and the detection limit is 0.5 ppb. The system is highly selective for copper except in the presence of iron(II,III) and cobalt(II). In conjunction with potassium fluoride as masking agent, the method was successfully applied to the determination of microamounts of copper(II) in serum. A mechanistic study of the chemiluminescence reaction is also discussed.     

Molybdenum determination in iron matrices by ICP-AES after separation and preconcentration using polyurethane foam

A procedure is proposed for the separation and determination of molybdenum in iron matrices by a batch process. It is based on the solid-phase extraction of the molybdenum(V) ion as thiocyanate complex on polyurethane (PU) foam. The extraction parameters were optimized. Using 0.20 mol L-1 hydrochloric acid, a thiocyanate concentration of 0.10 mol L-1, 100 mg of polyurethane foam and shaking time of 10 min, molybdenum (5-400 micrograms) can be separated and preconcentrated from large amounts of iron (10 mg). Desorption was carried out instantaneously by conc. nitric acid or acetone. Distribution coefficients, sorption capacity of the PU foam and coefficients of variation were also evaluated. The effect of some ions on the separation procedure was assessed. Iron(III) should be reduced to iron(II). The proposed procedure was used to determine molybdenum in standard iron matrices such as steel and pure iron. The achieved results did not show significant differences with certified values.     

The polarographic and voltammetric behaviour of the copper(II) mitoxantrone complex and its analytical application

The polarographic and voltammetric behaviour of the copper(II)-mitoxantrone complex have been studied. A well-defined linear sweep voltammetric peak was obtained at -0.275 V (vs. Ag AgCl ) or -0.325 V (vs. SCE) in ammonia-ammonium chloride (20 mmoll(-1), pH 9.0). The characteristics of the peak have been examined in detail. The experimental results show that the reduction of the copper(II) mitoxantrone complex is irreversible and the peak displays adsorption characteristics at the dropping mercury electrode. A mechanism is proposed for the reduction of the complex, comprising one-electron reduction of the copper(II) of the complex, is reduced directly in the complex form. A single-sweep oscillopolarographic method was develped for the determination of copper(II). The peak current is proportional to the concentration over the range 5 x 10(-8)-2 x 10(-5) mol l(-1). The method reported here has the advantage that the interference of many common metal ions is small.     

Selective extraction of iron(III) from aqueous nitrate solution in the presence of cobalt(II), copper(II) and nickel(II) ions using bis(delta2-2-imidazolinyl)-5,5'-dioxime.

The feasibility of using bis(delta2-2-imidazolinyl)-5,5'-dioxime (H2L) for the selective extraction of iron(III) from aqueous solutions was investigated by employing an solvent-extraction technique. The extraction of iron(III) from an aqueous nitrate solution in the presence of metal ions, such as cobalt(II), copper(II) and nickel(II), was carried out using H2L in binary and multicomponent mixtures. Iron(III) extraction has been studied as a function of the pH, equilibrium time and extractant concentration. From the extracted complex species in the organic phase, iron(III) was stripped with 2 M HNO3, and later determined using atomic-absorption spectrometry. The extraction was found to significantly depend on the aqueous solution pH. The extraction of iron(III) with H2L increases with the pH value, reaching a maximum in the zone of pH 2.0, remaining constant between 2 and 3.5 and subsequently decreasing. The quantitative extraction of iron(III) with 5 x 10(-30 M H2L in toluene is observed at pH 2.0. H2L was found to react with iron(III) to form ligand complex having a composition of 1:2 (Fe:H2L).     

Determination of traces of iron in indium phosphide by electrothermal atomic absorption spectrometry combined with solvent extraction

An electrothermal atomic absorption (ETAAS) method for the determination of traces of iron (0.1-1.0 microgram g-1) in Fe-doped indium phosphide (InP) has been developed. In order to overcome the indium matrix-effect and to achieve a useful detection limit, a preliminary solvent-extraction of Fe(III) with acetylacetone (HAA) is necessary. After sample dissolution with hydrochloric acid (1 + 1) the digest is evaporated to dryness, Fe(II) is oxidized to Fe(III) with nitric acid, the residue is dissolved in 0.01 mol L-1 HCl and the iron is extracted at pH 2.0 with 0.5 mol L-1 HAA in toluene. The organic phase is injected into the graphite furnace and the iron is directly evaluated by external organic standard calibration. The limit of detection (3SB) resulting from further in-situ preconcentration is 0.03 microgram g-1. When the method was applied to the analysis of real samples containing 0.2-0.7 microgram g-1 Fe, the RSD was in the range 8-21%. Results were compared with those independently obtained on the decomposed sample solution with inductively coupled atomic emission spectrometry (ICP-AES). The detection limit of the ICP-AES method, that needs matrix-matched standards, is 0.20 microgram g-1.     

Simultaneous spectrophotometric determination of La, Ho, Mn 5-Br-PADAP complexes using multivariate calibration with partial least-squares (PLS) data evaluation

A simple and fast analytical pocedure is proposed for the simultaneous spectrophotometric determination of lanthanum, holmium and manganese in synthetic ceramics, (La(0.8-x) Hox Sr0.2 MnO3), by using the partial least-squares (PLS) method. As chromogenic agent 5-Br-PADAP [2-(5-bromo-2-pyridylazo)-5-diethylaminophenol] was used, which form colored complexes with the three elements studied. To avoid metal hydrolysis, a mixture of ethanol and Triton X-100 at pH 9.5 was used for all experiments. A set of 17 calibration solutions measured throughout the 400-700 nm wavelength range was used in the calibration step. The concentration range for Mn(II) was 1-12 x 10(-6) mol L-1, while the range for the rare earth elements La(III) and Ho(III) was 2-8 x 10(-6) mol L-1. In order to demonstrate the applicability of the proposed method, a set of artificial samples containing the three analytes in variable proportions was prepared and analyzed. The analytical results obtained were quite acceptable with relative errors not greater than 7% in most cases.     

Non-extractive derivative spectrophotometric determination of cobalt in neutral micellar medium

A sensitive derivative spectrophotometric method using 1-nitroso-2-naphthol has been developed for determination of trace amounts of cobalt in the presence of a neutral surfactant. Photometric parameters, viz., lambda(max), molar absorption coefficient and analytical sensitivity of the complex formed in micellar media are 420 nm, 3.18x10(4) l mol(-1) cm(-1) and 2.05 ng ml(-1), respectively. Beer's law holds from 0.20 to 3.0 mug ml(-1) of the analyte concentration. The method has a high sensitivity with a detection limit of 1.68 ng ml(-1). A selective determination of cobalt in presence of copper(II) or iron(III) using derivative spectral profiles and without any masking or pre-separation is also reported. Samples of drugs and standard alloys analysed by the proposed method yielded results comparable to those obtained using recommended procedures.     

Determination of anti-inflammatory drugs in water samples, by in situ derivatization, solid phase microextraction and gas chromatography-mass spectrometry

In this work, the reactions of various copper ions with 1,3,3-trimethyl-2-[5-(1,3,3-trimethyl-1,3-dihydro-indol-2-ylidene)-penta-1,3-dienyl]-3H-indolium--more commonly known as dimethylindodicarbocyanine polymethyne dye (DIDC)--as well as the application of the results obtained for the development of a spectrophotometric method for the determination of Cu(I), Cu(II) and Cu(III) are described. Cu(I) and Cu(II) in the presence of chloride ions and DIDC reagent are extractable by a variety of organic solvents. It is important to emphasize that Cu(I) was extracted under considerably different experimental conditions than Cu(II). The optimum conditions for the extraction of the Cu ion associates with DIDC by amyl acetate and the determination of Cu(I) and Cu(II) were found to be: pH 3-5 and pH 3-6 and chloride concentrations of 0.5-0.8 mol L(-1) and 3-6 mol L(-1) for Cu(I) and Cu(II), respectively. The molar absorptivities for Cu(I) and Cu(II) are 1.8x10(5) L mol(-1) cm(-1) and 1.2x10(5) L mol(-1) cm(-1), respectively. A reaction mechanism is suggested. Cu(III) does not extract in the presence of chloride ions. However, Cu(III) is a strong oxidative agent which can cause the decolourisation of the DIDC reagent. The optimum conditions for Cu(III) determination were found to be: 2x10(-5) mol L(-1) DIDC; pH 8; water:acetone 4:1 medium. The developed procedures were tested for the determination of Cu(I), Cu(II) and Cu(III) in semiconductor samples.     

Diformylhydrazine as analytical reagent for spectrophotometric determination of iron(II) and iron(III)

The bidentate ligand diformylhydrazine (OHC-HN-NH-CHO), DFH, combines with iron(II) and iron(III) in alkaline media in the pH range 7.3-9.3 to form an intensely colored red-purple iron(III) complex with an absorption maximum at 470 nm. Beer's law is obeyed for iron concentrations from 0.25 to 13 microg mL(-1). The molar absorptivity was in the range 0.3258x10(4)-0.3351x10(4) L mol(-1) cm(-1) and Sandell's sensitivity was found to be 0.0168 microg cm(-2). The method has been applied to the determination of iron in industrial waste, ground water, and pharmaceutical samples.     

Flow-injection spectrophotometric determination of paraoxon by its inhibitory effect on the enzyme acetylcholinesterase.

A spectrophotometric enzymatic flow injection (FI) system for the determination of diethyl-p-nitrophenylphosphate (paraoxon) is proposed. The method was based on the determination of the acetic acid formed by the enzymatic reaction of the acetylcholinesterase, immobilized on glass beads, with the substrate acetylcholine. The acetic acid formed permeates through a PTFE membrane and is received by a solution (pH 7.0) containing the acid-base indicator Bromocresol Purple (B.C.P.), leading to a pH change and therefore to a color change. The variation of the absorbance of the solution is detected spectrophotometrically at 400 nm. The determination of paraoxon is related to its inhibitory action on the enzyme. Therefore the analytical signal is the difference between the signal that corresponds to the free and the one that corresponds to the inhibited enzyme, considering a fixed acetylcholine concentration. The correlation between the peak height and paraoxon concentration at a given acetylcholine concentration is linear in the range from 5.0 x 10(-7) mol L-1 to 5.0 x 10(-5) mol L-1 (r = 0.998) of paraoxon, with a relative estimated standard deviation (R.S.D.) of +/- 1.7% (n = 10) considering a solution containing 5.0 x 10(-6) mol L-1 of paraoxon and a solution containing 5.0 x 10(-3) mol L-1 of acetylcholine. Therefore, the quantitative limit detection is about 2.5 x 10(-7) of paraoxon (3 sigma). A 1,1'-trimethylene-bis(4-formylpyridinium bromide)dioxime (TMB-4) solution was used to reactivate the enzyme.     

High selective determination iron(II) by its enhancement effect on the fluorescence of pyrene-tetramethylpiperidinyl (TEMPO) as a spin fluorescence probe

A novel fluorescence method determination for iron(II) with a high selectivity and sensitivity has been proposed, based on the enhancement of fluorescence signals resulting from specific redox reaction between synthesized spin fluorescence probe pyrene-tetramethylpiperidinyl (TEMPO) and iron(II). Under the experimental conditions, fluorescent probe displayed a rapid and linear response for iron(II) over the concentration range from 2.4 x 10(-7) to 3.6 x 10(-6) mol/L. The limit of detection was 4.0 x 10(-8) mol/L. The relative standard deviation of six replicate measurements was 1.90% for 3.0 x 10(-7) mol/L iron(II). Because of the specific redox reaction between developed spin fluorescence probe and iron(II), there are few interference by other ions, especially in the presence of relative high concentration iron(III). The method has been successfully applied for iron(II) determinations in two different kinds of real samples. Results determined by the proposed method agree favorably with those determined UV-vis spectrometry method with 1,10-phenanthroline.     

Spectrophotometr1c determination of cadmium with 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol

The reaction between cadmium and 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol (5-Cl DMPAP) in aqueous alcohol media at pH 8.8-10.7 results in an intense violet colour which is stable for at least 8 hr. The composition is 2:1 reagent:metal and the formation constant (5.29 +/- 0.01) x 10(18). Beer's law is obeyed up to 1.34 ppm of cadmium at 550 nm. The optimal concentration range (Ringbom) is between 0.16 and 0.72 ppm. The apparent molar absorptivity at 550 nm is (1.20 +/- 0.01) x 10(5) l.mole(-1). cm(-1), making the sensitivity one of the highest known. The interference due to copper(III), iron(III), cobalt(II), nickel(II), gold(III), zinc(II) and manganese(II) can be suppressed.     

Polarographic determination of total iron content using a Fe(2+/3+)-Methylthymol Blue-NO2- system.

In the buffer solution of NH3-NH4Cl (pH = 8.5, 0.04 mol l(-1)), iron-Methylthymol Blue (MTB) can produce a sensitive polarographic wave at -1.10 V (vs. SCE) in the NaNO2. The peak current is linear with the concentration of the iron in the range of 3 x 10(-8)-5 x 10(-6) mol l(-1), and the detection limit is 1 x 10(-8) mol l(-1). By studying the characteristics of the wave and the electrode reaction mechanism, we can prove that the catalytic wave is an adsorption wave and that the peak current comes from the reduction of Fe(II). The molar ratio of iron to ligand was found to be 1:1. Adsorption particles are neutral molecules, the saturated adsorption quantity of the complex on the mercury electrode is 1.92 x 10(-9) mol cm(-2), according with the Frumkin isothermal formula. In the experiments, the adsorption coefficient (beta) is 4.05 x 10(5); the adsorption factor (gamma) is 0.70: the electron transfer number (n) is 2; the free energy (deltaG(o)) is 31.99 kJ mol(-1); the transfer coefficient of the irreversible adsorption is 0.42-0.45; and the reaction velocity constant (Ks) is 1.35 s(-1). This method, whose result is satisfying, can be applied to the detection of trace total iron contents in medicinal products.     

芦丁的方波溶出伏安行为及其分析检测

应用方波溶出伏安法研究了芦丁在0.1mol.L-1HAc-NaAc缓冲溶液中于玻碳电极上的电化学行为.考察了溶液酸度、沉积电位、沉积时间等因素对芦丁方波溶出伏安行为的影响,优化了实验参数.结果表明,在pH3.0的HAc-NaAc缓冲溶液中,芦丁在-0.46 V产生溶出峰,峰电流与芦丁的浓度在5.0×10-8mol.L-1~1.0×10-6mol.L-1范围内呈现良好的线性关系,相关系数0.997 99,检测限1.1×10-8mol.L-1.可用于药剂中芦丁含量的测定.     

Speciation of Co(II), Co(III), and Cu(II) in ethylenediamine solutions by capillary electrophoresis

A capillary electrophoretic (CE) method for the speciation of Co(II), Co(III), and Cu(II) in electroless copper-plating baths containing ethylenediamine (En) has been developed. The method is based on the selective pre-capillary derivatization of Co(II) with 1,10-phenanthroline (Phen) followed by CE separation of stable [CoPhen(3)](2+), [CoEn(3)](3+), and [CuEn(2)](2+) chelates. The proposed derivatization procedure protects Co(II) from oxidation by dissolved oxygen and enables rapid determination of all three metal species within a single run. The optimized separations were carried out in a fused silica capillary (57 cmx75-microm I.D.) filled with an ethylenediamine sulfate electrolyte (20 mmol L(-1) H(2)SO(4), pH 7.0 with En, applied voltage +30 kV) using direct UV detection at 214 nm. The detection limits for a signal-to-noise ratio of 3 and 10 s, hydrodynamic injections were 5x10(-6) mol L(-1) for Cu(II), 1x10(-6) mol L(-1) for Co(III), and 4x10(-7) mol L(-1) for Co(II). Application of the method to the speciation of Co(II), Co(III), and Cu(II) in copper-plating bath samples is also demonstrated.     

X-ray fluorescence analysis of trace metal ions following a preconcentration of metal-diethyldithiocarbamate complexes by homogeneous liquid-liquid extraction

A homogeneous liquid-liquid extraction method for 36 metal ions with diethyldithiocarbamate was studied. As a result, 11 metal ions were extracted as metal-chelates. Under the experimental conditions, the maximum concentration factor was 500 (i.e., 0.1 mL of sedimented liquid phase was produced from 50 mL of aqueous phase). Moreover, the proposed method was utilized as a preconcentration method for X-ray fluorescence analysis of these metals. The recovery of each metal was ca. 97-100%. All calibration curves were linear over the range of 5.0 x 10(-7) mol L-1 to 1.0 x 10(-5) mol L-1. The detection limits were at the 10(-8) mol L-1 levels and the relative standard deviations were below 5% (5 determinations). When the proposed method was used for the determination of contaminants in a synthetic sample (Al-based alloy model) and of components in an Au-Pd alloy, the results were satisfactory.     

Adsorptive and electrochemical behaviors of estradiol valerate at a mercury electrode

It was found that estradiol valerate could be adsorbed at a mercury electrode under open circuit. The adsorptive and electrochemical behaviors of estradiol valerate on a static mercury electrode were investigated by cyclic voltammetry, linear scan voltammetry and chronocoulometry. Based on this, a sensitive and selective adsorptive stripping square-wave voltammetric method was developed for the determination of estradiol valerate based on the optimization of solution conditions and electrochemical parameters. It was found that in a Britton-Robinson buffer solution containing 18% alcohol (pH 9.5), estradiol valerate gave a sensitive reductive peak at potential -1.29 V (vs. SCE) and the peak current was linear with the concentration of estradiol valerate in the range 2.0 x 10(-8)-2.5 x 10(-6) mol L-1. The detection limit was 1.1 x 10(-8) mol L-1. The interference of some common steroid estrogens was examined and it was found that they did not interfere in the determination of estradiol valerate in the present system.