液Zn对Fe_2Al_5涂层侵蚀的相变过程研究

本文对Fe2Al5涂层在液态Zn中的侵蚀相变过程进行了研究,实验结果表明:在侵蚀初期,靠界面张力平衡的作用,先发生热侵蚀,在试样表面形成热蚀沟,当热蚀沟达到一定程度后,液Zn与Fe2Al5相由不浸润变为浸润;同时Zn原子扩散进入Fe2Al5相并形成Fe2Al5-Znx固溶体相(η相);随着侵蚀时间的增加,发生在腐蚀界面上的液Zn对Fe2Al5涂层的侵蚀过程是恒温相变过程,相变过程使Fe2Al5涂层发生定向熔化.相变的驱动力来自于相成分的改变所引起的各相自由能的变化及各相间的相平衡的重新建立.     

Tb0.3Dy0.7－xPrx(Fe0.9Al0.1)1.95合金的磁致伸缩、自旋重取向和穆斯堡尔谱研究

系统研究了室温下Tb_0.3Dy_0.7-xPr_x(Fe_0.9Al_0.1)_1.95 (x=0，0.1，0.2，0.25，0.3，0.35)合金中稀土元素Pr替代Dy对晶体结构、磁致伸缩、各向异性和自旋重取向的影响. 结果发现，x≤0.1时，Tb_0.3Dy_0.7-xPr_x(Fe_0.9Al_0.1)_1.95完全保持MgCl₂立方Laves相结构，0.1<x≤0.3，有杂相出现并且随Pr替代量逐渐增多；晶格常数a随Pr含量x的增加缓慢增大. 磁致伸缩测量发现，随着替代量x的增多磁致伸缩减小；x>0.2时超磁致伸缩效应消失. 然而，x=0.1时合金的磁致伸缩略大于没有替代的，而且磁致伸缩随磁场更易趋于饱和，说明Pr替代有助于降低磁晶各向异性. 内禀磁致伸缩λ₁₁₁随Pr替代量x的增加接近线性增加. 由相对磁化率随温度的变化关系可以看出，自旋重取向温度随Pr替代量的增多呈先增后降趋势，在x=0.1处出现极大值. 穆斯堡尔效应表明，随Pr含量的增加Tb_0.3Dy_0.7-xPr_x(Fe_0.9Al_0.1)_1.95合金中易磁化轴可能在{110}面上绕主对称轴作微小转动，发生自旋重取向. 与Al元素替代效应相比，Pr替代Dy对自旋重取向的影响相对较小.     

虚晶近似法研究AlN-Al2O3固溶体系的力学性能和电子结构

基于密度泛函理论的第一性原理平面波赝势方法, 运用虚晶近似方法计算了AlN-Al₂O₃固溶区内尖晶石相氮氧化铝(Al₂₄O₂₄N₈, Al₂₃O₂₇N₅和Al₂₂O₃₀N₂)和α-Al₂O₃, AlN的力学性能和电子结构. 结果证明虚晶近似法应用到氮氧化铝结构计算中是可行的. 力学常数计算结果和弹性模量B, 剪切模量G, 杨氏模量E反映的材料硬度变化趋势与实验基本一致;Al₂O₃-AlN固 溶区内五种结构均为脆性性质且Al₂₃O₂₇N₅脆性最低, 硬度高、脆性低的特性反映了Al₂₃O₂₇N₅优异的抗弯强度性能. 五种结构满足力学结构上的稳定性, 立方尖晶石相氮氧化铝表现为弹性各向异性. 能带和态密度的计算分析表明这五种结构均为直接宽带隙结构. 在费米能级附近, 氮氧化铝结构中阴离子的2p态和阳离子的3s, 3p态发生了轨道杂化. 理论结果与实验数据基本符合, 为进一步研究提供了一定的理论方法和依据.     

Al-Cu-Fe二十面体准晶的深过冷研究

通过循环过热净化法研究了Ａｌ－Ｃｕ－Ｆｅ合金系中Al₆₅Cu₂₀Fe₁₅合金液的深过冷采用循环过热净化法净化Al₆₅Cu₂₀Fe₁₅合金液，获得了９８Ｋ的过冷度，并制备出直径为６ｍｍ的高纯度的Ａｌ－ＣＳ－ＦＳ二十面体准晶球．随着Al₆₅Cu₂₀Fe₁₅合金液过冷度的不同，Al₆₅Cu₂₀Fe₁₅合金液的第一形核相也发生变化．此外，提高对Al₆₅Cu₂₀Fe₁₅合金液的净化程度，可以提高合金液的形成Ａｌ－Ｃｕ－Ｆｅ二十面体准晶的能力．     

Al2O3Hx(x=1—3)分子团簇的结构与光谱研究

用密度泛函理论(DFT)的B3lyp方法在6-311++g(d,p)水平上对Al₂O₃H_x(x=1—3)分子的几何构型, 电子结构, 振动频率等性质进行了系统研究. 并给出了它们可能基态结构的总能量(E_T), 零点能(E_z), 摩尔热容(C_v), 标准熵(S), 原子化能(ΔE_m), 垂直电离能(IP)及垂直电子亲和能(E_A). Al₂O₃H和Al₂O₃H₂分子可能的基态的几何构型都为平面结构. Al₂O₃H₃的两个可能为基态的几何构型都是在立体Al₂O₃(D_3h)的几何结构基础上加三个氢原子构成. 这三个分子的能量最低结构为Al₂O₃H(²A′)C_s, Al₂O₃H₂(¹A′) C_s, Al₂O₃H₃ (²A) C₁.     

一级相变材料Mn1.2Fe0.8P0.4Si0.6的热磁发电性能

本文报道把热能直接转换电能的热磁发电技术所用一级相变新材料Mn_1.2Fe_0.8P_0.4Si_0.6的磁性和热磁发电性能.用高能球磨机械合金化技术和固相烧结合成方法制备了Mn_1.2Fe_0.8P_0.4Si_0.6化合物.磁性测量结果表明,该化合物呈现从铁磁状态变为顺磁状态的一级相变,居里温度为337K,并伴随巨大的磁化强度的变化.根据该材料的这一特性,设计制作了热磁发电演示装置,测定了热流引起材料的相变而产生的电流,并研究了固定磁场中热致磁转变产生的电流随热流温度和样品质量的变化.研究结果表明Mn_1.2Fe_0.8P_0.4Si_0.6化合物具有很好的热磁发电性能,可作为热磁发电材料.     

铁基Heusler合金Fe2Co1-xCrxSi的结构、磁性和输运性质的研究

基于多种实验手段和能带计算的方法, 对四元合金Fe₂Co_1-xCr_xSi的晶体结构、 磁性、输运性质及能带结构进行了研究. 研究发现, 随着Cr的增加, 合金Fe₂Co_1-xCr_xSi保持了高度有序结构, 逐渐从Hg₂CuTi结构的Fe₂CoSi 过渡到L2₁结构的Fe₂CrSi; 由于次晶格网络的破坏, 居里温度逐渐下降; 系列合金的分子磁矩呈现线性下降, 符合半金属特性; 剩余电阻比率与原子占位有序程度密切相关, 呈现两端大、 中间小的特点. 在Cr替代Co的过程中, 材料半金属能隙逐渐打开, 表现半金属特征. 同时费米能级从Fe₂CoSi半金属能隙的价带顶上移至Fe₂CrSi能隙的导带底. 最大的能隙宽度出现在x= 0.75处, 这表明四元合金有可能成为具有更高自旋极化率和更强抗干扰能力的自旋电子学材料.     

Tb1－xDyxFe2－y-Fe掺杂BaTiO3多层膜中的磁电耦合

用溶胶-凝胶法制备了Fe掺杂BaTiO₃粉体，在1350℃下烧结成圆片状多晶样品，并与Tb_1-xDy_xFe_2-y胶合成磁电(ME)双层膜或三层膜.实验分析表明Fe：BaTiO₃依然是四方相钙钛矿结构，但是居里温度及相变潜热均略低于纯净BaTiO₃.研究了Tb_1-xDy_xFe_2-y-Fe∶BaTiO₃双层膜和Tb_1-xDy_xFe_2-y-Fe∶BaTiO₃-Tb_1-xDy_xFe_2-y三层膜的ME效应.在2.8×10⁴A/m的磁场下，两者的横向ME电压系数均达其峰值，分别为6.225和26.25mV·(A·m^-1)^-1·cm^-1.并且，用掺杂BaTiO₃制备的双层膜和三层膜的横向ME电压系数均为相同条件下用纯净BaTiO₃制备的双层膜和三层膜的横向ME电压系数的1.5倍.另外由于不含铅，锆等有害物质，符合环保要求，因此采用掺杂BaTiO₃制备的磁电效应器件具有深入研究和应用价值.     

Sm(CobalFe0.1Cu0.1Zr0.033)6.9高温永磁合金的矫顽力

对Sm(Co_balFe_0.1Cu_0.1Zr_0.033)_6.9合金, 经810℃等温时效后以0.5℃/min逐渐冷却, 在600℃-400℃温度区间淬火, 研究了不同淬火温度下的磁滞回线、磁畴和矫顽力温度系数β. 发现时效600℃淬火后磁滞回线出现台阶状, 说明畴壁中应存在两处钉扎. 随淬火温度的降低, 合金的室温矫顽力显著增加, 磁滞回线的台阶消失. 通过磁畴形貌发现时效600℃淬火后的磁畴接近条形畴, 1:5相中Cu分布相对均匀, 形成的畴壁钉扎较弱, 从而使磁滞回线出现台阶, 决定矫顽力的畴壁钉扎位于两相界面处; 随时效淬火温度的降低, 磁畴逐渐细化, 畴壁1:5相中的畴壁能降低, 形成了较强的内禀钉扎, 并决定材料的矫顽力, 两相界面处的畴壁钉扎被掩盖. 对不同温度淬火合金的高温矫顽力研究表明, 最强的畴壁钉扎位于两相界面处时, 矫顽力随温度升高逐渐增加, 矫顽力出现温度反常现象; 最强的畴壁钉扎位于1:5相中心时, 矫顽力随温度升高逐渐衰减. 当测试温度达到500℃后不同淬火温度样品的矫顽力几乎相同, 此时最强畴壁钉扎均在两相界面处.     

一维Ni0.5Zn0.5Fe2O4/SiO2复合纳米结构的制备及其磁性能

采用溶胶-凝胶法结合静电纺丝技术制备了Ni_0.5Zn_0.5Fe₂O₄/SiO₂复合纳米纤维.利用热重-差热分析、X射线衍射、场发射扫描电镜、高分辨透射电镜和振动样品磁强计研究了前驱体纤维的热分解及相转化过程以及焙烧温度和SiO₂含量对目标纳米纤维的相组成、微观结构、形貌及磁性能的影响.结果表明,在450 ℃焙烧时,立方尖晶石结构已基本形成.随着焙烧温度由450 ℃升高到100     

Optical spectroscopy of Ca3Sc2Si3O12, Ca3Y2Si3O12 and Ca3Lu2Si3O12 doped with Pr

The silicates Ca₃Sc₂Si₃O₁₂, Ca₃Y₂Si₃O₁₂ and Ca₃Lu₂Si₃O₁₂, both undoped and doped with Pr³⁺ ions, have been synthesized by solid-state reaction at high temperature. The luminescence spectroscopy and the excited state dynamics of the materials have been studied upon VUV and X-ray excitation using synchrotron radiation. All doped samples have shown efficient 5d-4f emission upon direct VUV excitation of 5d levels, but only Ca₃Sc₂Si₃O₁₂:Pr³⁺ shows luminescence upon interband VUV or X-ray excitation. The VUV excited emission spectra of Ca₃Y₂Si₃O₁₂:Pr³⁺ and Ca₃Lu₂Si₃O₁₂:Pr³⁺ show features attributed to emission from two distinct sites accommodating the Pr³⁺ dopant. The decay kinetics of the Pr³⁺ 5d-4f emission in Ca₃Sc₂Si₃O₁₂:Pr³⁺ upon VUV excitation across the band gap are characterized by decay times in the range 25-28 ns with no significant rise after the excitation pulse. They appear to be faster upon X-ray irradiation than for VUV excitation. Weak afterglow components are attributed to defect luminescence.     

Multilayer Bi1.5Zn1.0Nb1.5O7/Ba0.6Sr0.4TiO3/Bi1.5Zn1.0Nb1.5O7 thin films for tunable microwave applications

Bi_1.5Zn_1.0Nb_1.5O₇/Ba_0.6Sr_0.4TiO₃/Bi_1.5Zn_1.0Nb_1.5O₇ tunable multilayer thin film has been fabricated by pulsed laser ablation and characterized. Phase composition and microstructure of multilayer films were characterized by X-ray diffraction, scanning electron microscopy (SEM) and atomic force microscopy (AFM). The film has very smooth surface with RMS roughness of 1.5-2 nm and grain size of 100-150 nm. Total film thickness has been measure to be 375 nm. The BZN thin films at 300 K, on Pt(1 1 1)/SiO₂/Si substrate showed zero-field dielectric constant of 105 and dielectric loss tangent of 0.002 at frequency of 0.1 MHz. Thin films annealed at 700 °C shows the dielectric tunability of 18% with biasing field 500 kV/cm at 0.1 MHz. The multilayer thin film shows nonferroelectric behavior at room temperature. The good physical and electrical properties of multilayer thin films make them promising candidate for tunable microwave device applications.     

La0.67Ca0.33MnO3薄膜皮秒光电效应

在1064 nm波长脉冲激光（脉宽25 ps）的照射下，钙钛矿氧化物薄膜La0.67Ca0.33MnO3/SrTiO3具有超快光电效应，对激光脉冲显示ps量级的响应时间，上升沿响应时间300 ps，半高宽700 ps，同时，对激光能量的响应灵敏度为500 mV/mJ。     

合成反铁磁Ni81Fe19/Co90Fe10/Ru/Co90Fe10/Ni81Fe19的研究

采用直流磁控溅射方法制备了一系列的合成反铁磁及以其为自由层的自旋阀.研究发现,在Ni₈₁Fe₁₉与Ru层之间插入适当厚度的Co₉₀Fe₁₀层后,可有效地提高合成反铁磁两磁性层间的反铁磁耦合强度,得到具有饱和场H_s更高、饱和磁化强度M_s更低、热稳定性更好的合成反铁磁.另外,以这种合成反铁磁作自旋阀的自由层时,可有效提高自旋阀的稳定性. 关键词： 合成反铁磁 退火 自旋阀     

Structure and magnetic order in La0.7Ca0.3Mn0.5Co0.5O3 and La0.8Sr0.2Mn0.5Co0.5O3 perovskites

In this paper we report the study of the perovskites La_0.7Ca_0.3Mn_0.5Co_0.5O₃ and La_0.8Sr_0.2Mn_0.5Co_0.5O₃ by neutron powder diffraction at various temperatures and magnetization measurements in zero applied field and at low cooling regimes. The replacement of half Mn by Co in La_0.7Ca_0.3MnO₃ and La_0.8Sr_0.2MnO₃ destroys their long-range ferromagnetism exhibiting a cluster glass ferromagnetic order similar to the one observed in many cobaltites.     

Depolarization currents in the Na0.5Bi8.5Ti2Nb4O27 and Na0.5Bi8.5Ti2Ta4O27 layered ferroelectrics

The influence of the prehistory on the electrical properties of layered ferroelectrics is investigated. It is established that the heating of short-circuited samples of the nonpolarized ceramic material Na_0.5Bi_8.5Ti₂Nb₄O₂₇ leads to the appearance of maxima of the current at temperatures below the Curie point only in the case of preliminary ageing of the samples. Original Russian Text ? A.I. Burkhanov, Yu.V. Kochergin, K. Bormanis, A. Kalvane, M. Dambekalne, 2009, published in Fizika Tverdogo Tela, 2009, Vol. 51, No. 7, pp. 1393–1394.     

Phase formation and characterization of Sr3Y2Ge3O12, Sr3In2Ge3O12, and Ca3Ga2Ge3O12 doped by trivalent europium

This work reports on the phase formation during a solid-state reaction of Eu³⁺-doped garnets with the general formula A₃B₂Ge₃O₁₂ (A=Ca, Sr and B=Ga, In, Y) and their luminescent properties. It is shown by XRD and DTA/TG experiments that the garnet-phase formation is completed at 1100-1200 °C. Moreover, it turned out that the position of the oxygen to europium charge-transfer band and the intensity of the forbidden 4f-4f transitions of Eu³⁺ is dependent on the covalent interaction between the Eu³⁺ activator and the surrounding oxygen anions. The investigated red-emitting luminescent materials show high lumen equivalents and deep red emission at the same time, which makes them attractive for the application in LEDs (light emitting diodes), in particular for near UV-emitting LEDs.     

Appearance of an inhomogeneous superconducting state in La0.67Sr0.33MnO3-YBa2Cu3O7-La0.67Sr0.33MnO3 trilayers

An experimental study of proximity effect in La_0.67Sr_0.33MnO₃-YBa₂CU₃O₇-La_0.67Sr_0.33MnO₃ trilayers is reported. Transport measurements on these samples show clear oscillations in critical current (I _c) as the thickness of La_0.67Sr_0.33MnO₃ layers (d _F) is scanned from ∼50 ? to ∼ 1100 ?. In the light of existing theories of ferromagnet-superconductor (FM-SC) heterostructures, this observation suggests a long range proximity effect in the manganite, modulated by its weak exchange energy (∼2 meV). The observed modulation of the magnetic coupling between the ferromagnetic LSMO layers as a function of d _F, also suggests an oscillatory behavior of the SC order parameter near the FM-SC interface.      

X-ray study of phase transitions in the system of solid solutions K2Pb4Nb10O30-Na2Pb4Nb10O30-K6W4Nb6O30

Boundaries of morphotropic phase transitions region in the system of solid solutions K₂Pb₄Nb₁₀O₃₀-Na₂Pb₄Nb₁₀O₃₀-K₆W₄Nb₆O₃₀ with the structure of the tetragonal tungsten bronze have been specified. Presence of the second morphotropic phase transition, perpendicular to the first one has been revealed. The temperature dependences of the structural parameters of some compounds have been investigated. The compounds with high values of Curie temperatures and working temperatures have been obtained.     

Incommensurate modulations in Ba2TiSi2O8, Sr2TiSi2O8, and Ba2TiGe2O8

Incommensurate modulations in Ba₂TiSi₂O₈, Sr₂TiSi₂O₈, and Ba₂TiGe₂O₈ are compared based on their corresponding electron diffraction patterns. The dependence of the modulations on chemical composition provides a suitable model system for the investigation of incommensurations in framework structures using high-resolution transmission electron microscopy (HRTEM). A widening of quantitative HRTEM utilising the concept of rigid units is proposed allowing for a determination of atomistic displacements responsible for the formation of incommensurately modulated structures.