Facile and ultra large scale synthesis of nearly monodispersed CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles by a low temperature sol–gel route

Nearly monodispersed cobalt ferrite nanoparticles were synthesized by a low temperature sol–gel route using propylene oxide as a gelation agent. The nanoparticles were obtained by the reaction of FeCl₂ and CoCl₂ in ethanol solution with propylene oxide to form the sol, followed by the boiling of the sol solution. The unique chemistry of this procedure allows the formation of highly homogeneous gel intermediate, resulting in the great reducing of crystallization temperature of ferrites to less than 100 °C without postannealing step. This guarantees the preparation of well defined and non-aggregated ferrite nanoparticles on an ultra-large scale of about 75 g in a single reaction. This large scale synthesis strategy offers important advantages over other conventional routes for the preparation of CoFe₂O₄ nanoparticles, showing the promising application of this route in the industrial production.     

Synthesis on an ultra large scale of nearly monodispersed γ-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles with La(III) doping through a sol–gel route assisted by propylene oxide

Nearly monodispersed La³⁺ doped γ-Fe₂O₃ nanoparticles were synthesized on an ultra-large scale of about 60 g in a single reaction by a low temperature sol–gel route. The nanoparticles were obtained by the reaction of FeCl₂ and La(NO₃)₃ in ethanol solution with propylene oxide to form the sol, followed by the boiling of the sol solution. The La³⁺ doping promotes the phase transformation temperature of γ-Fe₂O₃ nanoparticles from 350 to 650 °C by the La³⁺ doping induced enhancement of phase transformation activation energy. This large scale synthesis strategy offers important advantages over other conventional routes for the preparation of undoped and doped γ-Fe₂O₃ nanoparticles. These guarantee the promising application of this route in the industrial production.     

Low temperature and size controlled synthesis of monodispersed γ-Fe<Subscript>2</Subscript>O<Subscript>3 </Subscript>nanoparticles by an epoxide assisted sol–gel route

Monodispersed γ-Fe₂O₃ nanoparticles were prepared by a procedure-simple and precursor-cheap route, epoxide assisted sol–gel method. The γ-Fe₂O₃ nanoparticles were obtained by the reaction of FeCl₂ in ethanol solution with propylene oxide to form the sol, following by the boiling of the solution. As compared with other metal ions of +2 formal charge, the unexpected acidity of FeCl₂ in ethanol solution assure the formation of sol. As an advantage, the unique chemistry of this route results in the low temperature of synthesis, leading to the extremely small particle size of 2.3 nm and non-aggregation state of the particles.     

Simple synthesis of Co<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoflakes using a low temperature sol–gel method suitable for photodegradation of dyes

In this work we describe and discuss the synthesis, and characterization of Co₃O₄ nanoflakes prepared by citric acid based sol–gel method using cobalt nitrate precursor. The average crystalline size of Co₃O₄ was estimated from the X-ray diffraction peaks of powders using Scherrer’s formula. The size of the particles deduced from TEM agrees with XRD based values. The FTIR confirms formation of Co₃O₄. The SEM micrographs show the nanoflake morphology. Here we report the lowest temperature sol–gel method of preparation of Co₃O₄ nanoflakes and its photocatalytic study for the degradation of dye pollutant methylorange.     

Novel sol–gel method for preparation of high concentration ε-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>/SiO<Subscript>2</Subscript> nanocomposite

ε-Fe₂O₃/SiO₂ nanocomposite was prepared by novel solgel method using single precursor for both nanoparticles and matrix. This method allows to prepare the samples free of α-Fe₂O₃ with 40% of Fe₂O₃ in SiO₂. Nanoparticles of 12 nm diameter were obtained by annealing at 1,000 °C. The samples were characterized by powder X-ray diffraction and transmission electron microscopy. Mössbauer spectroscopy identified ε-Fe₂O₃ as the only magnetically ordered phase at room temperature. Magnetic measurements revealed progressive necking of hysteresis loops measured at 300 and 2 K. In both cases the intrinsic coercivity reaches only 0.25 T. Measurements up to 14 T shows monotonous decreasing trend of saturated magnetization with increasing temperature.     

High-temperature low-friction behaviors of γ-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>@SiO<Subscript>2</Subscript> nanocomposite coatings obtained through sol–gel method

In the present paper, the γ-Fe₂O₃@SiO₂ nanocomposite is prepared by sol–gel method and the γ-Fe₂O₃@SiO₂ nanocomposite coatings are deposited on the steel substrate. The microstructure, surface topography, and tribological properties of the γ-Fe₂O₃@SiO₂ nanocomposite were measured and investigated by X-ray diffraction (XRD), fourier transform infrared spectrometry (FTIR), transmission electron microcopy (TEM), and high-temperature tribometer, respectively. The tribotest were performed by high-temperature tribometer in the temperature ranges from 400 to 600?°C to investigate the tribological properties of the nanocomposites under high temperature. The experimental results show that there is the core-shell structure in the γ-Fe₂O₃@SiO₂ nanocomposite. It is also found that the γ-Fe₂O₃@SiO₂ nanocomposite coatings exhibit low friction (0.05) from 500 to 600?°C. XRD measurements show that low-friction behavior of the friction pair under high temperature is involved in the transformation between α-Fe₂O₃ and γ-Fe₂O₃ and the oxidations of the steel substrate during sliding. The core-shell structure of the nanocomposites inhibits γ-Fe₂O₃ of the soft phase changing into α-Fe₂O₃ phase and the thermal energy of the friction heat activates the oxidation of the steel substrate in ambient air, which are beneficial to form low shear interface and achieve high temperature low friction.

Open image in new window

The γ-Fe₂O₃@SiO₂ nanocomposite coatings by sol–gel method with amorphous and multi-core SiO₂ wrapping nano crystalline γ-Fe₂O₃ exhibit low coefficient of friction (CoF) from 500 to 600?°C.

     

Electrophoretic sol–gel synthesis of SrBi<Subscript>2</Subscript>Ta<Subscript>2</Subscript>O<Subscript>9</Subscript> nanowires

We report the independent invention of perovskite ferroelectric nanowires strontium bismuth tantalate (SrBi₂Ta₂O₉, SBT). Electrophoretic sol–gel techniques have been used successfully. The morphology and structures are analyzed via SEM, TEM and XRD. SBT nanowires and nanoparticles filled template revealed 30 and 40 μm long, respectively. SBT are proved to be a single phase of orthorhombic perovskite structure. As it indicated, SBT nanowires has been crystallized at 700 °C. To minimize surface polarity, SBT nanowires oriented preferentially along the growing axis (c axis) by translation and rotation of atomic clusters of SBT.     

Structural and optical characterization of sol–gel derived boron doped Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanostructured films

Pure and boron (B) doped iron oxide (Fe₂O₃) nanostructured thin films were prepared by sol–gel spin coating method. The effects of B (0.1, 0.2, 0.5 and 1 %) content on the crystallinity and morphological properties of Fe₂O₃ films were investigated by X-ray diffractometer and atomic force microscopy. X-ray diffraction patterns revealed that the Fe₂O₃ films have a rhombohedral crystalline phase of α-Fe₂O₃ phase (hematite) with nanostructure and their crystallite size (D) is changed from 27 ± 2 to 45 ± 5 nm with B dopant content. The minimum crystallite size value of 27 ± 2 nm was obtained for 0.2 % B doped Fe₂O₃ film. Carrying out UV–VIS absorption study for both doped and undoped films at room temperature, it was realized that allowed optical transitions may be direct or indirect transitions. The direct and indirect energy gap values for pure Fe₂O₃ were obtained to be 2.07 and 1.95 eV, respectively. The optical band gap value of the films was changed with 0.1 % B doping to reach 1.86 eV for direct band gap and 1.66 eV in case of indirect band gap.     

Optimization using response surface methodology for fast removal of hazardous azo dye by γ-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>@CuO nanohybrid synthesized by sol–gel combustion

An efficient adsorption system was developed for removal of hazardous Direct Blue 71 as a sample azo dye. The γ-Fe₂O₃@CuO adsorption system was synthesized based on a sol–gel combustion route and characterized by energy-dispersive X-ray (EDX) analysis, X-ray diffraction (XRD) analysis, vibrating-sample magnetometry (VSM), and field-emission scanning electron microscopy (FESEM) techniques. The response surface methodology with Box–Behnken design was used to evaluate the effects of pH, shaking time, and adsorbent dose on dye adsorption. The results showed that solution pH was the parameter with greatest effect on dye adsorption. Adsorption equilibrium was reached quickly, within 8 min. Study of isotherms revealed adsorption capacity of 45.7 mg g^?1 according to the Freundlich model. Sorbent regeneration could be performed using methanol–NaOH (0.1 mol L^?1) solution.     

Synthesis and characterization of sol–gel derived bioactive CaO–SiO<Subscript>2</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses containing magnetic nanoparticles

Magnetic bioglasses in the system CaO–SiO₂–P₂O₅ were prepared by interaction of acetic acid vapors with iron nitrate dispersed on the surface of sol–gel derived porous silicate network. Upon pyrolysis, the created iron acetate species transform into magnetic iron oxide nanoparticles. X-ray diffraction (XRD), FT-infrared (FT-IR) spectroscopy and surface area measurements (BET) were employed to monitor the evolution of glass structural features during the synthetic pathway as well as the structure and the texture of the resultant glasses. XRD, Raman spectroscopy and vibration magnetic measurements (VSM) revealed the features of magnetic phases, developed in the form of γ-Fe₂O₃ and magnetite. The obtained glasses exhibit in vitro bioactivity, expressed by spontaneous formation of hydroxyapatite on their surface after immersion in SBF at 37 °C, confirmed with μ-Raman and FT-IR spectroscopies.     

Sol–gel synthesis of iron yttrium garnet Y<Subscript>3</Subscript>Fe<Subscript>5</Subscript>O<Subscript>12</Subscript> using metal acetylacetonates

The synthesis of hydrolytically active heteroligand complexes of the composition [M(O₂C₅H₇)x(ⁱOC₅H₁₁)_y] (M = Fe³⁺ and Y³⁺) using iron and yttrium acetylacetonates was studied. Their reactivity was shown to be dependent on the degree of shielding of iron and yttrium cations in hydrolysis and polycondensation during the formation of a connected dispersion system. The crystallization temperature of iron yttrium garnet Y₃Fe₅O₁₂ upon heating xerogel was determined. It was found that the dispersity, microstructure, and magnetic characteristics of the products depend on the synthesis conditions.     

Highly transparent UV absorption TiO<Subscript>2</Subscript>-SiO<Subscript>2</Subscript>-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> films without oxidation catalytic activity prepared by a room temperature sol–gel route

TiO₂-SiO₂-Fe₂O₃ films as new UV absorption material were prepared through an epoxide derived sol–gel route. The films were formed at room temperature by doping of a little amount of γ-Fe₂O₃ nanoparticles in TiO₂-SiO₂. The obtained films show advantages such as high stability, efficient absorption in the UV region, high transparency in the visible range, and low oxidation catalytic activity to organic materials. It was found that 2.3 nm γ-Fe₂O₃ nanoparticles doped films exhibit stronger UV absorption than the films doped with 5.1 nm particles because of the increased grain strain of the nanoparticles with smaller size. These advantages of the films guarantee the broad application of this inorganic UV absorption film in the protection of heat sensitive organic materials such as artworks.     

Rapid synthesis of the low thermal expansion phase of Al<Subscript>2</Subscript>Mo<Subscript>3</Subscript>O<Subscript>12</Subscript> via a sol–gel method using polyvinyl alcohol

Aluminum molybdate was successfully synthesized using a simplified PVA assisted sol–gel method resulting in highly crystalline, monophasic (monoclinic P2₁/a) samples. These materials could readily be obtained at temperatures of 600 and 700 °C after calcining for as little as 15–20 min. Scanning electron microscopy and X-ray powder diffraction indicated that even the sample calcined at 600 °C for 20 min was free of impurities and composed of submicron sized particles (~300 nm). Transmission electron microscopy was used to confirm the monophasic character and submicron dimensions of the as-prepared powders. In addition to producing high quality samples, it was also observed that the metal to PVA ratio used during this simplified synthesis, could be used as a control parameter for tailoring the particle sizes of the final product.     

Adsorption of Cl<Superscript>−</Superscript> ions on γ-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> oxide from nitrate solutions

The adsorption of chloride ions on γ-Fe₂O₃ oxide (maggemite) from nitrate solution is studied using the method of potentiometric titration and an ion-selective electrode. The specific character of adsorption is determined. It is shown that the maggemite surface coverage with Cl^? ions increases with increasing concentration of ions in the solution, decreasing pH value, and increasing potential. The adsorbability of ions changes drastically in the pH range about pH₀ (γ-Fe₂O₃)6.2. It is found that the adsorption of chloride ions from neutral nitrate solution exponentially increases in the potential range from 0.1 to 1.0 V. The type of adsorption isotherm and the adsorption parameters are determined. It is found that, in the absence of external polarization, the concentration dependences of adsorption of Cl^? ions are complex-shaped, and their initial portions are described by the Langmuir isotherm. Further increase of adsorption is explained by the penetration of Cl^? ions inwards the oxide.     

Magnetic properties of binary and ternary mixed metal oxides NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript> and Zn<Subscript>0.5</Subscript>Ni<Subscript>0.5</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> doped with rare earths by sol—gel synthesis

The spinel-type ferrites NiFe₂O₄ and Zn_0.5Ni_0.5Fe₂O₄ modified by lanthanide ions Eu³⁺ and Tb³⁺ were prepared by a sol—gel process with propylene oxide as a gelating agent. The phase homogeneity of the samples was tested by XRD and Mössbauer spectroscopy. Transmission electronic microscopy used for characterisation of the morphology of the samples revealed nanosized powdered samples with a narrow distribution of particle sizes. It was noted that the presence of Ln³⁺ ions influenced the magnetic properties of nanosized NiFe₂O₄ and Ni_0.5Zn_0.5Fe₂O₄ ferrites. The dependence of the magnetic properties of the samples on the rare-earth doping may be explained by the different grain sizes. The saturation magnetisation tends to decrease with increasing rare-earth doping and decreasing crystallite size. A similar trend was observed for the coercive field, with the exception of the Tb³⁺-doped Zn_0.5Ni_0.5Fe₂O₄ where it remained the same as in the pure ferrite.     

Low temperature synthesis of Co<Subscript>2</Subscript>SiO<Subscript>4</Subscript>/SiO<Subscript>2</Subscript> nanocomposite using a modified sol–gel method

The paper presents a study on the preparation of Co₂SiO₄/SiO₂ nanocomposites by a new modified sol–gel method. We have prepared gels starting from tetraethylorthosilicate (Si(OC₂H₅)₄), cobalt nitrate Co(NO₃)₂·6H₂O and some diols: ethylene glycol (C₂H₆O₂), 1,2propanediol (C₃H₈O₂) and 1,3propanediol (C₃H₈O₂), for a final composition: 30% CoO/70% SiO₂. During the heating of the gels at 140 °C, a redox reaction takes place between NO₃ ⁻ ions and diol with formation of some carboxylate anions. These carboxylate anions react with the Co(II) ions to form coordination compounds embedded in silica matrix, as evidenced by FT-IR spectrometry and thermal analysis. These Co(II) coordinative compounds thermally decompose in the range 250–300 °C to the corresponding oxides: CoO and/or Co₃O₄ inside the matrices pores. When CoO results, it reacts with SiO₂ at low temperature leading to Co₂SiO₄, which crystallizes at 700 °C. XRD patterns of the samples annealed at temperatures lower than 700 °C were characteristic to amorphous phases. The samples annealed at temperatures ≥700 °C, contain Co₂SiO₄ (olivine) as unique crystalline phase inside the amorphous silica matrix, according to XRD patterns. As evidenced by TEM images, Co₂SiO₄ nanoparticles are homogenously dispersed inside the silica matrix.     

Preparation of LiTaO<Subscript>3</Subscript> nanoparticles by a sol–gel route

A sol–gel route was developed to prepare pure ultrafine LiTaO₃ powders using Ta₂O₅, Li₂CO₃, citric acid (CA) as chelating agent, ethylene glycol (EG) as esterification agent and polyethylene glycol (PEG) as dispersant. The effects of pH value and heat treatment temperature of powder precursor on the synthesis of LiTaO₃ powders were investigated. The phase content and morphology of the final product were evaluated by XRD, SEM and TEM. A transparent gel was produced when heating a mixed-solution of CA, EG, Li and Ta ions with a molar ratio of [CA]:[EG]:[Li]:[Ta] = 3.0:6.0:1.0:1.0 and 2‰ PEG additions with a pH value of 7 at water bath temperature of 80 °C. The results showed that single phase LiTaO₃ powders with average particle sizes of nanometers were produced after heat treatment of the powder precursor at 650, 700, 800, and 900 °C respectively for 2 h.     

The sol–gel chromium-modified V<Subscript>6</Subscript>O<Subscript>13</Subscript> as a cathodic material for lithium batteries

A new V₆O₁₃-based material has been synthesized via the sol–gel route. This sol–gel mixed oxide has been obtained from an appropriate heat treatment of the chromium-exchanged V₂O₅ xerogel performed under reducing atmosphere. This new compound, with the chemical formula Cr_0.36V₆O_13.50, exhibits a monoclinic structure (C2/m) with the following unit cell parameters, a=11.89 Å, b=3.68 Å, c=10.14 Å, β=101.18°. The electrochemical characterization of this compound has been performed using galvanostatic discharge–charge experiments in the potential range 4–1.5 V and completed by ac impedance spectroscopy measurements. It exhibits a specific capacity of about 370 mAh g^?1, which makes the compound Cr_0.36V₆O_13.50 the best one in the V₆O₁₃-based system: 85% of the initial capacity (315 mAh g^?1) after the 35th cycle is still available at C/25 without any polarization. From impedance spectroscopy, a high kinetics of Li transport (D _Li=1.8×10^?9 cm² s^?1) is found at mid-discharge.     

NiTiO<Subscript>3</Subscript> nanoparticles encapsulated with SiO<Subscript>2</Subscript> prepared by sol–gel method

NiTiO₃ (NTO) nanoparticles encapsulated with SiO₂ were prepared by the sol–gel method resulting on core-shell structure. Changes on isoelectric point as a function of silica were evaluated by means of zeta potential. The NTO nanoparticles heat treated at 600°C were characterized by X-ray diffraction, transmission electron microscopy (TEM) and energy dispersive X-ray analysis. TEM observations showed that the mean size of NTO is in the range of 2.5–42.5 nm while the thickness of SiO₂ shell attained 1.5–3.5 nm approximately.     

Synthesis of CeO<Subscript>2</Subscript> or α–Mn<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles via sol–gel process and their optical properties

Nanocrystalline cubic fluorite/bixbyite CeO₂ or α–Mn₂O₃ has been successfully synthesized by using methanol as a solvent via sol–gel method calcined at 400 °C. The obtained products were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), UV–vis absorption and Photoluminescence (PL) spectroscopy. TEM reveals that the as-synthesized ultra-fine samples consist of elliptical/spherical and sheet-like morphology of crystalline particles of 8/30 nm, which are weakly aggregated. Optical absorbance spectra reveal that the absorption of ceria in the UV region originates from the charge- transfer transition between the O²⁻ (2p) and Ce⁴⁺ (4f) orbit in CeO₂. However, α–Mn₂O₃ nanostructures with nearly pure band gap emission should be of importance for their applications as UV emitters.