电色谱模式下四肽印迹整体柱分子识别机理的研究

本文采用原位聚合法制备了以四肽YPLG为模板的毛细管分子印迹整体柱,在毛细管电色谱模式下以模板分子和它的结构类似物YPGL为样品,对分子印迹聚合物的识别机理进行了研究。这两种四肽由于化学结构相似且等电点非常相近,普通的电色谱和毛细管电泳方法分离非常困难。但我们的实验表明,印迹整体柱对模板分子具有特异性识别能力,因此YPLG与YPGL之间的分离因子为1.73,分离度达3.72。实验中系统地研究了流动相中有机溶剂的含量、缓冲溶液的pH值、缓冲溶液的盐浓度以及柱温对四肽识别的影响。实验中我们观察到模板在印迹柱上具有非线性的Van’t Hoff行为,揭示可能存在多重保留机理。本研究结果表明,在毛细管电色谱模式下,分子印迹整体柱的分子识别主要决定于样品与印迹聚合物之间的氢键作用以及印迹孔穴的三维结构。     

4-氨基吡啶印迹聚合物毛细管整体柱的电色谱识别机理

在石英毛细管中原位聚合制备了4-氨基吡啶印迹聚合物毛细管整体柱，通过考察流动相中乙腈比例对4-氨基吡啶、2-氨基吡啶和硫脲在分子印迹聚合物毛细管整体柱、空白聚合物毛细管整体柱和硅烷化衍生的开管柱上迁移时间和分离情况的影响，研究了4-氨基吡啶分子印迹聚合物毛细管整体柱的CEC识别机理。发现有机添加剂的含量对印迹聚合物的印迹识别能力影响很大，甚至能改变混合物的流出顺序。根据随乙腈含量改变混合物迁移时间和流出顺序的变化规律，可以推测：随着乙腈含量的提高，色谱保留对迁移的影响越来越大；随着乙腈含量的降低，电泳对迁移的影响越来越大。     

水溶液微悬浮聚合法制备酸性药物吲哚美辛分子印迹微球及其色谱表征

以带有羧基的酸性药物吲哚美辛为模板分子、碱性的4-乙烯基吡啶为功能单体,采用水溶液微悬浮聚合法制备了用于色谱分离的微米级分子印迹微球.详细讨论了流动相中缓冲溶液的pH值对吲哚美辛在MIMs柱上的容量因子(k′)、分离因子(α)和印迹因子(β)的影响.通过MIMs柱对吲哚美辛和4-氨基吡啶(4-AP)的保留行为的比较,证明以4-乙烯基吡啶为功能单体制得的MIMs对吲哚美辛的识别作用,主要靠吡啶环上氮原子与吲哚美辛羧基之间的离子键相互作用,以及吡啶环与模板分子之间的π-π相互作用.     

分子印迹整体柱在高校液相色谱和电色谱手性分离中的应用

在常规不锈钢色谱管中以甲基丙烯酸为功能单体,采用原位聚合法制备了(5S,11S)-特罗格尔碱(S-TB)的印迹整体柱.考察了流动相中添加不同量的醋酸和水对分离的影响,结合台阶梯度洗脱模式在S-TB整体柱上实现了对TB消旋体的快速分离.另外,以碱性单体2-二甲基乙基胺甲基丙烯酸酯(DAMA)为功能单体,在毛细管中采用原位聚合法制备了毛细管分子印迹整体柱,用于在毛细管电色谱(CEC)中对消旋体1,1'-联-2-萘酚(BNL)进行手性分离.结果表明,以DAMA为功能单体可以制备其他酸性模板的分子印迹聚合物,从而扩大了分子印迹聚合物(MIP)在CEC分离中的应用范围.     

氨基安替比林MIP-CEC整体柱的制备及电色谱性能研究

以氨基安替比林为模板分子,在内径100 μm的石英毛细管内采用原位聚合法制备了分子印迹毛细管整体柱,以电色谱模式分离了氨基安替比林及其结构类似物安替比林,在乙腈(体积分数15%)-磷酸二氢钠缓冲液(5 mmol/L)作为流动相(pH 7.0)条件下,18 min内完成分离,分离因子为1.37.考察了缓冲液中乙腈含量、pH值、离子强度对电渗流、溶质保留时间及分离因子的影响,探讨了整体柱识别机理.     

分子印迹整体柱在高效液相色谱和电色谱手性分离中的应用

在常规不锈钢色谱管中以甲基丙烯酸为功能单体,采用原位聚合法制备了(5S,11S)-特罗格尔碱(S-TB)的印迹整体柱。考察了流动相中添加不同量的醋酸和水对分离的影响,结合台阶梯度洗脱模式在S-TB整体柱上实现了对TB消旋体的快速分离。另外,以碱性单体2-二甲基乙基胺甲基丙烯酸酯(DAMA)为功能单体,在毛细管中采用原位聚合法制备了毛细管分子印迹整体柱,用于在毛细管电色谱（CEC）中对消旋体1,1′-联-2-萘酚(BNL)进行手性分离。结果表明,以AMA为功能单体可以制备其他酸性模板的分子印迹聚合物,从而扩大了分子印迹聚合物MIP）在CEC分离中的应用范围。     

L-扁桃酸金属配位分子烙印聚合物的手性分离能力

以CuⅡ-[N-(4-vinylbenzyl)]im inod iacetic ac id为功能单体、三甲氧基丙烷三甲基丙烯酸酯为交联剂、甲醇为聚合溶剂,制备了L-扁桃酸的金属配位分子烙印聚合物。用它作为色谱固定相,系统考察了流动相的pH、甲醇含量以及缓冲溶液的浓度对其手性分离能力的影响。在中性或弱碱性(pH 7~9)流动相条件下,L-扁桃酸的金属配位分子烙印聚合物对D,L-扁桃酸的手性分离效果最好;其手性分离能力随流动相中甲醇含量和缓冲溶液浓度的增大而增强。本研究的工作为在极性溶剂中制备高选择性的分子烙印聚合物提供了实践支持。     

腈菌唑分子印迹聚合物的制备及识别性能研究

以腈菌唑为模板分子,采用原位分子印迹技术,制备具有特定识别性能的连续棒状分子印迹聚合物。考察了流动相中酸量对分离的影响,研究了几种结构类似物在所得分子印迹柱上的保留特性。结果表明,这种棒状分子印迹聚合物比相应的空白聚合物有高的识别性能和选择性。     

分子印迹整体柱快速分离烟酰胺及烟酸

以药物烟酰胺为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,甲苯和正十二醇的混合溶液为致孔剂,采用原位聚合法制备了具有特定识别性能和分离能力的分子印迹聚合物,并将其作为高效液相色谱固定相,实现了模板分子与烟酸在2 min内的快速分离。在规格为50 mm×4.6 mm i.d.色谱柱上,以纯水为流动相（流速为7.0 mL/min）、操作温度为室温的色谱条件下,模板分子与烟酸的分离度达1.8。讨论了流动相中有机溶剂含量、醋酸及碱含量和流速对分离的影响。结果表明,原位聚合法制备的整体分子印迹聚合物在以纯水作流动相时对模板分子与其类似物有快速分离能力,这对于体内药物的分离富集研究具有很好的应用前景。     

2,4-二氯苯氧乙酸分子印迹整体柱的制备、表征及色谱性能研究

以2,4-二氯苯氧乙酸分子为模板,甲基丙烯酸为单体,乙二醇二甲基丙烯酸酯为交联剂,甲苯和十二醇为混合致孔剂,采用热引发原位聚合法制备了作为高效液相色谱固定相的分子印迹整体柱.用红外光谱、扫描电镜、比表面积分析法对聚合物进行了表征.考察了模板分子在不同条件下合成的印迹整体柱及空白整体柱上容量因子的变化规律,同时探讨了流动相中甲醇的体积分数、pH值、流速对印迹整体柱分离性能的影响.结果表明,在优化的合成条件下制备的分子印迹整体柱可在15 min内分离2,4-二氯苯氧乙酸及其类似物苯氧乙酸,分离度为1.52.对柑桔提取液进行了分离测试,结果满意.     

Mechanism of molecular recognition on molecular imprinted monolith by capillary electrochromatography

The recognition mechanism of molecularly imprinted polymer (MIP) in capillary electrochromatography (CEC) is complicated since it possesses a hybrid process, which comprises the features of chromatographic retention, electrophoretic migration and molecular imprinting. For an understanding of the molecular recognition of MIP in CEC, a monolithic MIP in a capillary with 1,1'-binaphthyl-2,2'-diamine (BNA) imprinting was prepared by in situ copolymerization of imprinted molecule, methacrylic acid and ethylene glycol dimethacrylate in porogenic solvent, a mixture of toluene-isooctane. Strong recognition ability and high column performance (theory plates was 43,000 plates/m) of BNA were achieved on this monolithic MIP in CEC mode. In addition, BNA and its structural analogue, 1,1'-bi-2, 2'-naphthol, differing in functional groups, were used as model compounds to study imprinting effect on the resultant BNA-imprinted monolithic column, a reference column without imprinting of BNA and a open capillary. The effects of organic modifier concentration, pH value of buffer, salt concentration of buffer and column temperature on the retention and recognition of two compounds were investigated. The results showed that the molecular recognition on MIP monolith in CEC mode mainly derived from imprinting cavities on BNA-imprinted polymer other than chromatographic retention and electrophoretic migration.     

Preparation and characterization of molecularly imprinted monolithic column based on 4-hydroxybenzoic acid for the molecular recognition in capillary electrochromatography

A novel prepared method of molecularly imprinted monolithic polymers (MIPs) using 4-hydroxybenzoic acid (4-HBA) as templates for capillary electrochromatography (CEC) was developed. A strategy of high concentration of monomers in the pre-polymerization mixture was used to fulfil the solubility of polar imprinted molecule and reduction of the interference during complex formation. The imprinted polymer capillary monolithic column was synthesized by an in situ therm-initiated copolymerization of methacrylic acid (MAA) and ethylene glycol dimethacrylate with a mixture of toluene-isooctane as a porogenic solvent in the presence of a polar model imprinting molecule, 4-HBA. On the resultant MIP monolithic column, the effect of parameter of CEC on electroosmotic flow (EOF) and the retention of 4-HBA was investigated. The column efficiency of the imprinted molecule, 4-HBA, was 13,000 plates/m. The resolution of isomers of HBA was 5.0 and good molecular recognition was achieved for 4-HBA.     

Investigation of enantiomer recognition of molecularly imprinted polymeric monoliths in pressurized capillary electrochromatography screening the amino acids and their derivatives

Molecularly imprinted monolithic columns were prepared for chiral separation of tyrosine and its amino acid derivatives by in situ therm-initiated copolymerization of methacrylic acid, 4-vinylpyridine and ethylene glycol dimethacrylate. The enantiomers were rapidly separated on monolithic columns in less than 10 min by pressurized capillary electrochromatography (pCEC). The influences of several parameters such as the content of cross-linking monomer on the composition of the pre-polymerization mixture were systematically investigated. The influence of the pCEC conditions including the composition of the mobile phase was also optimized to obtain the good enantioseparation. It was found that in addition to molecularly imprinted recognition, chromatographic retention and electrophoretic migration play important roles in the retention and chiral recognition of molecularly imprinted polymer (MIP) columns. The cross-selectivity for similar amino acids and its derivatives were systematical investigated for understanding the recognition mechanism on the MIP monolithic columns. The results indicated that molecularly imprinted polymer recognizes the template molecule by its molecular shape defined binding cavity.     

Recognition of oxytocin by capillary electrochromatography with monolithic tetrapeptide-imprinted polymer used as the stationary phase

Using YPLG (Tyr-Pro-Leu-Gly), a tetrapeptide, as the template, an imprinted monolithic column was prepared and applied to the selective recognition of oxytocin based on the epitope approach and capillary electrochromatography (CEC). By optimizing the polymerization solution in terms of functional monomer, cross-linking reagent, porogen, and imprinted template via CEC evaluations of synthesized columns, an imprinted monolith with good recognition capacity (the imprinting factors for YPLG and oxytocin were 4.499 and 4.013, respectively) and high column efficiency (theoretical plates for YPLG and oxytocin were 22,995 plates/m and 16,952 plates/m, respectively) was achieved. In addition, the effects of various experimental parameters on the recognition of oxytocin, including the organic modifier content, the buffer concentration, and the pH value, were studied systematically. Furthermore, a mixture of oxytocin and other proteins was analyzed using this monolithic CEC column, and oxytocin was eluted much more slowly than other large biomolecules, which demonstrated the high selective recognition ability of such an imprinted monolith for oxytocin with PLG (Pro-Leu-Gly) as the epitope. Figure Separation of a mixture of oxytocin, BSA, bovine hemoglobin, ovalbumin, and lysozyme on the open column, the blank monolithic column, and the monolithic YPLG-imprinted column     

Dual‐templates molecularly imprinted monolithic columns for the evaluation of serotonin and histamine in CEC

To extend the application of molecularly imprinted polymers, the dual‐templates molecularly imprinted monolithic columns were developed in a capillary format. Two templates serotonin and histamine were simultaneously imprinted using two different functional monomers such as methacrylic acid (MAA) and methylenesuccinic acid (MSA) in a mixture of ethylene glycol dimethacrylate (EDMA) as a cross‐linker and AIBN as polymerization initiator dissolved in DMF as porogen. The resulting molecular imprinted polymers (MIPs) were characterized based on their performance in the CEC separation of two imprinted templates. The optimization parameters such as pH, ACN composition, and concentration of the eluent were varied to achieve best resolution and efficiency for CEC separation of templates with each MIP column. It was found that the MIP monolith column fabricated using MSA offered better resolution and separation efficiency compared to column fabricated with MAA. This work utilized the dual‐templates imprinting approach successfully and broadens the scope of multi‐templates imprinting capabilities in capillary format in CEC application.     

Electroosmotic pump‐supported molecularly imprinted monolithic column for capillary chromatographic separation of nitrophenol isomers

In this work, a novel molecularly imprinted polymer (MIP) monolithic column with integrated in‐column electroosmotic pump (EOP) was designed and successfully prepared to facilitate the capillary chromatography with MIP column. A silica‐based EOP was synthesized at the detection end of the MIP monolithic capillary column by so‐gel to provide the hydrodynamic driven force for the capillary chromatography. Because of large surface area and low fluidic resistance of the silica monolith,a strong and steady EOF was generated by silica‐based EOP, indicating that the EOP was quite compatible with MIP capillary column. With the sufficient EOF provided by EOP, the electro‐driven based capillary chromatographic separation of nitrophenol isomers was achieved in 4‐vinylpyridine‐based MIP monolithic capillary, which was originally proved infeasible because of the EOF shortage. No significant influence upon the specific recognition of the MIP was found due to the setting of EOP after the detection window of the column. The influence of experimental parameters on the EOF such as voltage and pH value of running buffer was investigated. The column was also evaluated by capillary liquid chromatographic mode to compare with EOP‐driven capillary chromatography. Higher column efficiency was obtained by EOP‐driven separation with improved peak shape. The results suggested that EOP‐supported technique would be a good way to solve the problem of weak EOF generation in electro‐driven capillary chromatography.     

Triazine herbicide imprinted monolithic column for capillary electrochromatography

Trietazine was selectively separated from aqueous solution containing the competitor molecule cyanazine, which is similar in size and shape to the template molecule. Structural features of the molecularly imprinted column were figured out by SEM. The influence of the mobile‐phase composition, applied electrical field, and pH of the mobile phase on the recognition of trietazine by the imprinted monolithic polymer has been evaluated, and the imprint effect in the trietazine‐imprinted monolithic polymer was demonstrated by an imprinting factor. The optimized monolithic column resulted in separation of trietazine from a structurally related competitor molecule, cyanazine. In addition, fast separation was obtained within 6 min by applying higher electrical field, with the electrophoretic mobility of 2.97 × 10^?8 m²V^?1s^?1 at pH 11.0.     

分子印迹聚合物颗粒在毛细管电色谱中的应用

依据分子印迹技术(MIT)制备的分子印迹聚合物(MIP)颗粒对模板分子及其结构类似物具有特异性识别和选择性吸附作用,同时具有较大的比表面积和快速的传质动力学特性,因而被广泛用作液相色谱固定相和固相萃取材料。将MIP颗粒作为固定相应用于毛细管电色谱(CEC),结合了CEC的快速、高效和MIP的高亲和性、高选择性的特点,成为分析科学领域最具有发展前景的分离技术之一。MIP颗粒在CEC领域有几种不同的应用形式: 作为填充材料填充到毛细管柱中;作为嵌入材料嵌入到毛细管柱内部不同基质的骨架中;作为准固定相添加到CEC运行缓冲溶液中。本文综述了近几年MIP颗粒在CEC领域应用的发展,对该领域今后的发展前景进行了展望。