静态顶空气相色谱法测定有机残留溶剂二甲基亚砜

建立了高灵敏度、高精确度的静态顶空气相色谱结合氢火焰离子化检测器测定药物辅料中二甲基亚砜残留溶剂的方法.以液体石蜡为溶解溶剂,优化了顶空瓶的液相体积,并对顶空气相色谱的关键实验参数:自动进样时间、顶空加压时间、顶空平衡温度、顶空平衡时间及气相柱温箱升温程序等进行了优化.在最优条件下,确定了方法的检出限和定量限分别为1....     

Preparation and evaluation of a neutral methacrylate-based monolithic column for hydrophilic interaction stationary phase by pressurized capillary electrochromatography

A polar and neutral polymethacrylate-based monolithic column was evaluated as a hydrophilic interaction capillary electrochromatography (HI-CEC) stationary phase with small polar–neutral or charged solutes. The polar sites on the surface of the monolithic solid phase responsible for hydrophilic interactions were provided from the hydroxy and ester groups on the surface of the monolithic stationary phase. These polar functionalities also attract ions from the mobile phase and impart the monolithic solid phase with a given zeta potential to generate electro-osmotic flow (EOF). The monolith was prepared by in situ copolymerization of a neutral monomer 2-hydroxyethyl methacrylate (HEMA) and a polar cross-linker with hydroxy group, pentaerythritol triacrylate (PETA), in the presence of a binary porogenic solvent consisting cyclohexanol and dodecanol. A typical HI-CEC mechanism was observed on the neutral polar stationary phase for both neutral and charged analytes. The composition of the polymerization mixture was systematically altered and optimized by altering the amount of HEMA in the polymerization solution as well as the composition of the porogenic solvent. The monoliths were tested in the pCEC mode. The resulting monoliths had different characteristics of hydrophilicity, column permeability, and efficiency. The effects of pH, salt concentration, and organic solvent content on the EOF velocity and the separation of nucleic acids and nucleosides on the optimized monolithic column were investigated. The optimized monolithic column resulted in good separation and with greater than 140,000 theoretical plates/m for pCEC.     

Ultra-performance liquid chromatography/mass spectrometry of intact proteins

Given that numerous small molecule applications of ultra-performance liquid chromatography (UPLC) have been published, efforts were made to examine the potential of UPLC to enhance the separation of intact proteins. Beginning with typically employed conditions, column temperature and organic solvent were optimized followed by an HPLC vs. UPLC comparison. When applied to a mixture of 10 protein standards, the optimized method yielded improved chromatographic resolution, enhanced sensitivity, and a threefold increase in throughput. Subsequent cell lysate analysis demonstrated no compromise in chromatographic or mass spectral data quality at 1/3 of the original run time.     

Solvent extraction of Sb(III) with malachite green into chloroform

A rapid and selective method for the solvent extraction of Sb(III) using malachite green (C. I. Basic green 4) has been described. Effect of different parameters affecting the extraction coefficient value of Sb(III) such as acidity, time of equilibration, KI concentration, solvents, anions, etc. has been studied. For various elements the separation factor has been evaluated. The stoichiometry of the extracted species has been determined by the method of substoichiometric extraction. The decontamination factor for some elements using substoichiometric quantities of the extracting agent has been evaluated. Radiotracers were employed for the extraction studies. The method elaborated has been employed for the quantitative determination of antimony in normal, benign and cancerous tissues of the human brain.     

甲基丙烯酸酯整体柱毛细管电色谱法快速分析白芷中的主要活性成分

以甲基丙烯酸酯整体柱为分离柱,建立了一种快速分离、分析白芷药材提取物中的主要活性成分欧前胡素(imperatorin)、异欧前胡素(isoimperatorin)、珊瑚菜内酯(phelloptorin)和发卡二醇(falcarindiol)的毛细管电色谱(CEC)方法。在整体柱制备实验中对三元致孔剂组成成分的比例进行了系统的考察。在分离实验中对流动相的组成(包括有机相组成、缓冲液浓度和缓冲液的pH值)进行了优化。最终的优化条件为: 流动相为乙腈-20 mmol/L NaH2PO4(pH 4.95)(50:50, v/v),分离电压为－25 kV。结果表明,所制备的甲基丙烯酸酯毛细管整体柱具有良好的渗透性和重现性;4种分析物的标准曲线线性关系良好(r2＞0.997),检出限均小于0.34 mg/L,加样回收率为95.18%～98.44%。该方法快速、简便、可靠。应用该方法对18个不同产地的白芷样品进行了测定,并对其药材质量进行了评价。     

Structural characterization of silicone polymers using compositional ultra-high performance liquid chromatography separation,electrospray ionization,and high resolution/accurate mass

In this article, the development of an on-line ultra-high performance liquid chromatography (UHPLC)-high resolution/accurate mass (HR/AM) methodology for timely characterization of a broad range of silicone polymers is described. Electrospray ionization was optimized for silicone polymers to enable the direct coupling of the separation with mass spectrometry. Reverse-phase UHPLC was optimized to provide a high resolution separation of oligomers by molar mass and by end-group composition. With the high resolution compositional separation, multiple pseudo-molecular ion species were indexed with retention time and assisted in rapid identification of oligomer species. Relative retention times of different oligomer end-group species separated based on polarity provided additional information to aid data interpretation. These additional pieces of information were combined with accurate mass to provide a high information content analysis in a relatively short time frame. This methodology was applied to polymer end-group characterization, as well as comparative analysis examples.     

“改进的棱柱形”优化系统在高效液相色谱中的建立和应用 Ⅰ.“棱柱形”溶剂强度优化系统的改进

本文建立了适于高效液相色谱的“Improved-PRISMA”优化系统,利用全范田二元线性梯度淋洗进行溶剂强度的优化,只需一次实验即可得知所需溶剂的最佳强度,简化了原“PRISMA”系统选择溶剂强度的过程。将此系统用于七个有机磷化合物的分离,得到了满意的结果。     

Solid‐phase microextraction of methadone in urine samples by electrochemically co‐deposited sol–gel/Cu nanocomposite fiber

Electrochemically co‐deposited sol–gel/Cu nanocomposites have been introduced as a novel, simple and single‐step technique for preparation of solid‐phase microextraction (SPME) coating to extract methadone (MDN) (a synthetic opioid) in urine samples. The porous surface structure of the sol–gel/Cu nanocomposite coating was revealed by scanning electron microscopy. Direct immersion SPME followed by HPLC‐UV determination was employed. The factors influencing the SPME procedure, such as the salt content, desorption solvent type, pH and equilibration time, were optimized. The best conditions were obtained with no salt content, acetonitrile as desorption solvent type, pH 9 and 10 min equilibration time. The calibration graphs for urine samples showed good linearity. The detection limit was about 0.2 ng mL⁻¹. Also, the novel method for preparation of nanocomposite fiber was compared with previously reported techniques for MDN determination. The results show that the novel nanocomposite fiber has relatively high extraction efficiency.     

Extractive separation of group IVB elements: analysis of alloy samples

A method is proposed for the extraction and mutual separation of quadrivalent titanium, zirconium and hafnium from hydrochloric acid using triphenylphosphine oxide dissolved in toluene as an extractant. The optimum conditions for the extraction and separation have been evaluated from critical study of acid concentration, extractant concentration, period of equilibration and effect of diluent. The effect of foreign ions on the extraction and determination is also discussed. The probable composition of the extracted species has been deduced from logD-logC plots. The method affords mutual separation of titanium, zirconium and hafnium and is applicable to the analysis of alloy samples.     

Stereochemistry of the reduction of tropinone

Tropinone has been reduced under various conditions of time, temperature, solvent and reducing agent. The stereoisomeric composition of the reduction product was determined by infra-red spectrophotometry. The results indicate the participation of kinetic and thermodynamic factors in the stereoisomeric course of the reduction, the former depending upon the effective size of the reducing species. An assignment of the order of size of reducing species in particular solvents is made.

The stereoisomeric composition of the product of equilibration is independent of the reagent and the temperature in the system studied.     

High response smart gels: synthesis and application

Stimuli-responsive hydrogels change their volume and elasticity in dependence on the properties of the liquid phase. The amount of solvent uptake is dependent upon the chemical nature of the gel and the nature of its environment, e.g. solvent composition, temperature, pH, etc. The swelling/deswelling process is time consuming. For many applications the response time must be short. According to Tanaka's equation the rate of equilibration is inversely proportional to the square of gel size and proportional to the mutual (or cooperative) diffusion of the network and the solvent. D_coop is determined by the properties of the cross-linked polymer and can not be changed for a given chemical system. By decreasing the characteristic dimension of the gel, it is possible to reduce the time for equilibration. The synthesis, characterization of thin layers and small particles of T-sensitive polymers and their application in a micro-valve is described.     

Effect of the 18-crown-6 and benzo-18-crown-6 on the solvent extraction and separation of lanthanide(III) ions with 8-hydroxyquinoline

The synergistic solvent extraction of 13 lanthanides with mixtures of 8-hydroxyquinoline (HQ) and the crown ethers (S) 18-crown-6 (18C6) or benzo-18-crown-6 (B18C6) in 1,2-dichloroethane has been studied. The composition of the extracted species has been determined as LnQ₃ · S. The values of the equilibrium constant and separation factor have been calculated. Here, the effect of the synergistic agent (18C6 or B18C6) on the extraction process is discussed.     

Optimization of binary porogen solvent composition for preparation of butyl methacrylate monoliths in capillary liquid chromatography

Butyl methacrylate monolithic columns in 320 microm i.d. fused silica capillaries for reversed-phase capillary liquid chromatography were prepared by radical polymerization initiated thermally with azobisisobutyronitrile (AIBN). Polymerization mixture contained butyl methacrylate (BMA) as the function monomer and ethylene dimethacrylate (EDMA) as the crosslinking agent with 1,4-butanediol and 1-propanol as a binary porogen solvent. Ratio of 1,4-butanediol to 1-propanol in the porogen solvent was optimized regarding the monolithic column efficiency and performance. Total porosity, column permeability, separation impedance, Walters hydrophobicity index, retention factors, peak asymmetry factors, height equivalents to a theoretical plate and peak resolutions were used for characterization of the prepared monolithic columns. The polymerization mixture consisting of 17.8% of BMA, 21.8% of EDMA, 18.0% of 1,4-butanediol, 42.0% of 1-propanol and 0.4% AIBN generated monolithic columns of the best performance having a sufficient permeability and the lowest separation impedance. It was also demonstrated that monolithic columns of this composition exhibited good preparation reproducibility and an excellent pressure resistance when applied in capillary liquid chromatography.     

Separation of hydrophobic solutes by organic-solvent-based micellar electrokinetic chromatography using cation surfactants

In this study, the separation of 13 homologous stick-like hydrophobic solutes, i.e., biphenyl nitrile derivatives, by organic-solvent-based micellar electrokinetic chromatography (MEKC) was investigated in terms of separation medium composition, species and concentration of surfactant, other additives, separation voltage and temperature. The results showed that the 13 strong hydrophobic compounds were baseline separated in 25 min with a repeatability of less than 1.3% (RSD) for migration time. The separation medium was a mixture of methanol, 2-propanol and water (58.5:10:31.5), containing 150 mM cetyltrimethylammonium bromide (CTAB) and 20 mM sodium borate. Variety of solvent composition, temperature and applied voltage all showed remarkable effect on the separation. The organic-solvent-based MEKC method proved to be superior to the aqueous MEKC and microemulsion electrokinetic chromatography (MEEKC) methods for the separation of strongly hydrophobic compounds.     

Comparison of sheathless and sheath-flow electrospray interfaces for the capillary electrophoresis-electrospray ionization-mass spectrometry analysis of peptides

Capillary electrophoresis coupled to mass spectrometry via an electrospray interface provides a powerful system for separation and characterization of a high number of biomolecules. The present paper describes a home-made sheathless interface and compares it with a commercial sheath-flow interface, using a separation method based on a peptide hormone mixture of therapeutic interest. In a previous work, we optimized the parameters involved in a sheath-flow interface and obtained good results in sensitivity and reproducibility. The sheathless interface is performed with a graphite-coated electrospray ionisation (ESI) tip attached to the separation capillary. We demonstrate that electrolyte composition is the main parameter affecting signal sensitivity and separation resolution. The effect of the nature and concentration of the organic solvent added to the separation electrolyte is carefully studied. Furthermore, a general comparison of both interfaces is made in terms of separation, reproducibility, and sensitivity obtained under the optimized conditions described. Advantages and disadvantages of both coupling setups have been evaluated.     

Preparation and characterization of V-shaped PS-b-PEO brushes anchored on planar gold substrate through the trithiocarbonate junction group

Trithiocarbonate group was introduced into the polystyrene-b-poly(ethylene oxide) (PS-b-PEO) block copolymers as the junction of the blocks through RAFT polymerization. Mixed PS and PEO brushes with a V-shape were prepared by anchoring the trithiocarbonate group on the planar gold substrate. The morphology of the V-shaped brushes was characterized by atomic force microscopy (AFM) and the surface composition responsive to solvent treatment was detected by X-ray photoelectron spectroscopy (XPS). Different morphologies were observed for the V-shaped PS-b-PEO brushes, depending on the chain structure and solvent treatment. The highly selective solvent for PEO, ethanol, can intensify or induce microphase separation of the V-shaped brushes, leading to vertical microphase separation. When the V-shaped brushes are treated with the co-solvent, THF, miscible morphology, lateral microphase separation, and vertical microphase separation are observed as the PS block length increases. After treatment with the non-selective poor solvent, cyclohexane, the V-shaped PS(106)-b-PEO(113) brush, exhibits a laterally microphase-separated morphology, but the V-shaped PS(52)-b-PEO(113) and PS(253)-b-PEO(113) brushes are vertically microphase-separated.     

Determination of organotin compounds in biological samples using accelerated solvent extraction,sodium tetraethylborate ethylation,and multicapillary gas chromatography–flame photometric detection

A method has been developed for species-selective analysis of organotin compounds in solid, biological samples. The procedure is based on accelerated solvent extraction (ASE) of analytes and includes extraction of the tin species with a methanol–water (90% methanol) solution of acetic acid/sodium acetate containing tropolone (0.03% w/v), their ethylation with NaBEt₄, and separation and detection by GC–FPD. The analytical procedure was optimized with an unspiked sample of harbor porpoise (Phocoena phocoena) liver. Effects of ASE operational variables (extraction temperature and pressure, solvent composition, number of static extraction steps) are discussed. Method detection limits (MDL) were in the range 6–10 ng(Sn) g^–1 dry weight and 7–17 ng(Sn) g^–1 dry weight for butyl- and phenyltin compounds, respectively. Recoveries were comparable with or better than those obtained by use of other procedures reported in the literature. The analytical procedure was validated by analysis of NIES No. 11 (fish tissue) certified reference material.     

Analysis of black tea theaflavins by non-aqueous capillary electrophoresis.

In this study a new capillary electrophoresis (CE) method was developed to quantify the four major theaflavins occurring in black tea. Where aqueous based CE methods showed poor selectivity and considerable band broadening, non-aqueous CE achieved baseline separation of the theaflavins within 10 min. The effects of the organic solvent composition and background electrolyte concentration on the separation selectivity and electrophoretic mobilities were investigated. Our optimized separation solution consisted of acetonitrile-methanol-acetic acid (71:25:4, v/v) and 90 mM ammonium acetate. This method was used to analyze three black tea samples.     

Application of microchip-CE electrophoresis to follow the degradation of phenolic acids by aquatic plants

In this paper, we describe the separation and detection of six phenolic acids using an electrophoretic microchip with pulsed amperometric detection (PAD). The selected phenolic acids are particularly important because of their biological activity. The analysis of these compounds is typically performed by chromatography or standard CE coupled with a wide variety of detection modes. However, these methods are slow, labor intensive, involve a multistep solvent extraction, require skilled personnel, or use bulky and expensive instrumentation. In contrast, microchip CE offers the possibility of performing simpler, less expensive, and faster analysis. In addition, integrated devices can be custom-fabricated and incorporated with portable computers to perform on-site analysis. In the present report, the effect of the separation potential, buffer pH and composition, injection time and PAD parameters were studied in an effort to optimize both the separation and detection of these phenolic acids. Using the optimized conditions, the analysis can be performed in less than 3 min, with detection limits ranging from 0.73 microM (0.10 microg/mL) for 4-hydroxyphenylacetic acid to 2.12 microM (0.29 microg/mL) for salicylic acid. In order to demonstrate the capabilities of the device, the degradation of a mixture of these acids by two aquatic plants was followed using the optimized conditions.     

Preparative separation of flavone dimers from Dysosma versipellis by counter‐current chromatography: Trifluoroacetic acid as a solvent system modifier

The separation of natural products is grueling and time‐consuming work with repeated isolations needed to obtain purified compounds. However, using counter‐current chromatography, a unique liquid–liquid partition chromatography, constituents can usually be purified efficiently. During the separation of flavone dimers from Dysosma versipellis (Hance) by counter‐current chromatography, the separation resolution and sample loading was impeded by the emulsification of the sample. By screening, trifluoroacetic acid was selected as the solvent modifier to eliminate the emulsification. Then, a quaternary solvent system of hexane/ethyl acetate/methanol/water (4:6:5:5 v/v/v/v) with trifluoroacetic acid at a low concentration of 0.5% v/v was used to purify the components from D. versipellis. Compared to that without trifluoroacetic acid, the separation resolution as well as the sample loading both increased greatly. In addition, flavone dimers in low concentrations could be enriched and purified at high sample loading. As a result, five podophyllotoxins and 11 flavonoids were purified and characterized by interpretation of spectroscopic data, in which two of eight flavone dimers were new and a known flavone dimer was first separated from this species.