Ultrathin molecularly imprinted polymer sensors employing enhanced transmission surface plasmon resonance spectroscopy

An ultrathin novel nanosensor (31.5 +/- 4.1 nm thick in the absence of analytes), employing a molecularly imprinted polymer as a recognition element for cholesterol and gold nanoparticle enhanced transmission surface plasmon resonance spectroscopy for detection, was constructed.     

Nanoscale actuation of thermoreversible polymer brushes coupled with localized surface plasmon resonance of gold nanoparticles

This paper describes the fabrication of hybrid nanoassemblies with polymer brushes and gold nanoparticles enabling detection of nanoscale optical changes based on localized surface plasmon resonance. The reversible and thermosensitive nanoscale actuation is achieved by combining stimuli-responsive polymer brushes and gold nanoparticles independently and selectively assembled on substrates. These hybrid nanoassemblies are assembled on numerous substrates and will be applicable for optoelectronics, nanoactuator, and nanosensor applications.     

Nanosensors based on responsive polymer brushes and gold nanoparticle enhanced transmission surface plasmon resonance spectroscopy

Swelling (and shrinking) of poly(2-vinylpyridine), P2VP, polymer brushes, caused by pH changes, could be readily monitored by transmission surface plasmon resonance, T-SPR, spectroscopy. Gold nanoparticles attached to the P2VP polymer brushes dramatically enhanced the pH-induced shift in the T-SPR absorption spectra. (A 50 nm shift of the absorption maximum of the T-SPR spectrum of the supporting gold nanoislands was observed upon changing the pH from 5.0 to 2.0, corresponding to a swelling of the polymer brushes from 8.1 +/- 0.7 to 24.0 +/- 2.0 nm. Same shift in the opposite direction was observed upon changing the pH from 2.0 to 5.0.)     

Second harmonic generation and optical anisotropy of a spin-cast polymer film

The nonlinear susceptibilities (χ⁽²⁾₃₃, χ⁽²⁾₃₁), and the refractive index anisotropy, of a main chain accordion polymer, BCSC (see the text for the complete chemical formula), have been measured by the techniques of second harmonic generation (SHG) and waveguiding. A large birefringence, which is induced in the BCSC film by the spin-coating process, is almost removed by electric field poling. Our results demonstrate the fundamental difference between the birefringence associated with quadrupolar orientational order and the dipolar order associated with SHG. © 1993 John Wiley & Sons, Inc.     

A molecular spectroscopic view of surface plasmon enhanced resonance Raman scattering

The enhancement of resonance Raman scattering by coupling to the plasmon resonance of a metal nanoparticle is developed by treating the molecule-metal interaction as transition dipole coupling between the molecular electronic transition and the much stronger optical transition of the nanoparticle. A density matrix treatment accounts for coupling of both transitions to the electromagnetic field, near-resonant energy transfer between the molecule-excited and nanoparticle-excited states, and dephasing processes. This fully quantum mechanical approach reproduces the interference effects observed in extinction spectra of J-aggregated dyes adsorbed to metal nanoparticles and makes testable predictions for surface-enhanced resonance Raman excitation profiles.     

The effects of surface layers on third harmonic generation from solutions of a nematogenic polymer

Third harmonic generation (THG) is used to study the third-order nonlinear optical properties of nematic and isotropic solutions of poly(1,4-phenylene-2,6-benzobisthiazole) and related small-molecule model compounds. Maker fringe patterns (MFP) obtained using both plane slab and wedge-shaped cells for fundamental wavelengths of 1.542 and 1.907 μm are analyzed in terms of postulated surface layers in the isotropic preparations. The layers are postulated to comprise regions with concentration smaller than for the bulk sample, in which the rod-like chains tend to have their axes parallel to the plane of the surface, creating a negatively birefringent uniaxial nematic layer. The THG with the nematic solution exhibits intensity with polarization components unexpected for the uniaxial nematic symmetry attributed from linear optical properties, along with other unexpected features in the MFP. This behavior is attributed to the effects of surface layers, postulated to exhibit biaxial nematic symmetry, in which the uniaxial nematic symmetry is broken in regions on the scale of a wavelength. This provides for averaging that does not cause departure from the linear optical behavior expected for a uniaxial nematic, but does produce effects on nonlinear optical properties. © 1996 John Wiley & Sons, Inc.     

Recent developments and applications of hybrid surface plasmon resonance interfaces in optical sensing

Nanostructured noble metals exhibit an intense optical near field due to surface plasmon resonance, therefore promising widespread applications and being of interest to a broad spectrum of scientists, ranging from physicists, chemists, and materials scientists to biologists. A wealth of research is available discussing the synthesis, characterization, and application of noble metal nanoparticles in optical sensing. However, with respect to the sensitivity of the frequency and width of these surface plasmon resonance modes to the particle’s shape, size, and environment, in nearly every case, success strongly depends on the availability of highly stable, adhesive, and sensitive nanoparticles. This undoubtedly presents a challenging task to nanofabrication. The past decade has witnessed fascinating advances in this field, in particular, the construction of oxide-based hybrid plasmonic interfaces to overcome the problem addressed above by (1) coating the metallic nanostructures with thin overlayers to form sandwiched structures or (2) embedding metallic nanostructures in a dielectric matrix to obtain metal/dielectric matrix nanocomposite films. In this critical review, we focus on recent work related to this field, beginning with a presentation of hybrid films with enhanced structural and optical stability, readily and selectively designed using chemical and physical techniques. We then illustrate their interesting optical properties and demonstrate exciting evidence for the postulated application in surface plasmon sensing fields. Finally, we survey the work remaining to be done for that potential to be realized.     

Monitoring gold nanorod synthesis by localized surface plasmon resonance

Surfactants can direct the growth of gold nanoparticles to create anisotropic structures in high yield by simple means, yet the exact roles of surfactants and other reactants are not entirely understood. Here we show that one can exploit the geometrical dependence of the localized surface plasmon resonant extinction spectrum of gold nanorods to monitor their synthesis kinetics. By using quantitative measurements of nanorod extinction cross sections, Gans' theory for the spectral extinction of prolate spheroids can be normalized to provide values for the nanorod length and diameter from extinction spectra measured during growth. The nanorod length growth rate was first observed at 0.15 nm/s and decayed during the growth reaction. The rate dependence on nanorod size did not correspond to any simple reaction-limited or diffusion-limited growth mechanisms.     

Characterization of surface-confined alpha-synuclein by surface plasmon resonance measurements

Urea-driven denaturation and renaturation of surface-bound alpha-synuclein are monitored by surface plasmon resonance (SPR) spectroscopy. The differential SPR angle shift (Delta Theta(SPR))(Net) enables us to estimate the Gibbs free energy change (DeltaG(o)) for the denaturation of the supported alpha-synuclein. DeltaG(o) for the denaturation of the supported alpha-synuclein, which is indirectly related to its biological activity can be increased significantly by the mixed self-assembled monolayers of 11-mercaptoundecanoic acid and 1,6-hexanedithiol. These SPR measurements of surface-bound biomolecules suggested herein can be further utilized to design effective biological scaffold for biosensor, biocatalyst, and possible diagnosis.     

Second harmonic generation induced by charge-transfer complexes in a centrosymmetric medium

We consider the second harmonic generation (SHG) caused by impurities embedded in a nonlinear (χ⁽³⁾) optical medium which itself does not display χ⁽²⁾ optical response. In the case when the impurity molecules (charge-transfer (CT) complexes) possess an optical transition accompanied by charge transfer, we demonstrate that the excitation of impurities with a pump field may result in a contribution of the host medium to SHG. Depending on the presence or absence of the angular alignment of the excited static CT dipoles, there may be coherent SHG or weak incoherent SH scattering.     

Electrical switching of DNA monolayers investigated by surface plasmon resonance

The switching of DNA monolayers between a "lying" and a "standing" state initiated by applying electric field, and the subsequent DNA hybridization at different states were investigated in a contactless, label-free mode by surface plasmon resonance (SPR) technique. The results showed that the strength of the electric field and surface coverage could influence the switching of DNA monolayers. In addition, it was found that DNA hybridization efficiency could be enhanced or decreased when DNA probes stood straight up or lay flat on the gold surface, depending on the potential of the gold substrate. The enhancement of DNA hybridization efficiency reached the maximum when surface coverage reached 5.87 x 10(12) molecules/cm(2) and the potential of gold substrate was more negative than -0.7 V (versus ITO-coated glass). The research may be helpful for the construction of sensitive biosensors, biochips, and nanoscale electronic devices.     

The characterization of biomolecular secondary structures by surface plasmon resonance

Recently there has been considerable interest in using surface plasmon resonance (SPR) for the measurement of conformational changes of immobilized biomolecules that are induced by an exogenous analyte. While a number of studies have shown the analytical utility of such measurements, there has been no report which characterizes the specific secondary structure that actuates the change in SPR signal. The use of SPR to indicate the type of secondary structure present in two immobilized polypeptides, poly-L-lysine (PL) and poly-L-glutamic acid (PGA), and a globular protein, concanavalin A (Con A) is described in this report. The PL, PGA and Con A were modified with N-succinimidyl 3-(2-pyridyldithiol) propionate (SPDP) to introduce disulfide groups to facilitate the attachment onto gold-coated surfaces via self-assembly. Ethanol and 2,2,2-trifluoroethanol (TFE) were used to induce changes in the secondary structure of the immobilized polypeptides and the protein respectively. Using both circular dichroism (CD) and Fourier transform infrared (FTIR) spectroscopies, it has been demonstrated that it is possible to correlate the signal changes observed in SPR to the secondary conformation of the biomolecule. Both CD and FTIR showed that a decrease in SPR signal corresponded to a high content of beta, turn or unordered structures while an increase corresponded to a high alpha-helical content. The sensitivity of the SPR technique is comparable to that obtained in solution with CD and FTIR spectroscopies. These results are the first demonstration that SPR can be used to characterize secondary structures. There is potential, therefore, for SPR to be used as a technique to study secondary conformational changes of immobilized polypeptides and proteins.     

Detection of CD4~+ T-lymphocytes from hemodialyzed patients by surface plasmon resonance

A surface plasmon resonance(SPR) method was presented to discriminate hemodialyzed T-lymphocytes from the normal based on antibody-cell recognition.By dynamic reaction with fixed anti-human CD4 antibody,SPR could offer significant signals to distinguish hemodialyzed patients from the healthy controls within 200 s after the cell injection in respect of either rising speed or maximum binding capacity(p < 0.01).The ratio method is also used to exclude the non-specific adsorption.The percentage of hemodialyzed patients’ CD4~+ T cells against the healthy control is 69±18%.The most attractive of the present method is its ability to detect the intact and label-free lymphocytes,and further to detect the subpopulations,or proteins secreted by the desired lymphocytes subset.     

A 3,3′-dichlorobenzidine-imprinted polymer gel surface plasmon resonance sensor based on template-responsive shrinkage

Molecularly imprinted polymer gel film on the gold substrate of a chip was prepared with minute amount of cross-linker for the fabrication of a surface plasmon resonance (SPR) sensor sensitive to 3,3′-dichlorobenzidine. The molecularly imprinted gel film was anchored on a gold chip by a surface-bound photo-radical initiator. The sensing of 3,3′-dichlorobenzidine is based on responsive shrinkage of the imprinted polymer gel film that is triggered by target binding. This change can improve the responsiveness of the imprinted SPR sensor to 3,3′-dichlorobenzidine. The molecularly imprinted polymer gel film was characterized with contact angle measurements, electrochemical impedance spectroscopy, cyclic voltammogram, swelling measurements and atomic force microscopy. The changes of SPR spectroscopy wavenumber shifts revealed that the imprinted gel sensing film can ‘memorize’ the binding of 3,3′-dichlorobenzidine compared to non-imprinted one. The imprinted gel-SPR sensor showed a linear response in the range of 9.0 × 10⁻¹² to 5.0 × 10⁻¹⁰ mol L⁻¹ (R² = 0.9998) for the detection of 3,3′-dichlorobenzidine, and it also exhibited high selectivity to 3,3′-dichlorobenzidine compared to its structurally related analogues. We calculated the detection limits to be 0.471 ng L⁻¹ for tap water and 0.772 ng kg⁻¹ for soil based on a signal to noise ratio of 3. The method showed good recoveries and precision for the samples spiked with 3,3′-dichlorobenzidine. This suggest that the imprinted gel-SPR sensing method can be used as a promising alternative for the detection of 3,3′-dichlorobenzidine.     

Gold nanoparticles propulsion from surface fueled by absorption of femtosecond laser pulse at their surface plasmon resonance

Femtosecond laser irradiation of assembled nanoprisms on a quartz substrate at their strong absorbing surface plasmon resonance frequency causes their propulsion from the substrate. SEM and AFM show that the particles fly while keeping their prismatic shape, but they decrease in size by an amount that can be calculated assuming atomic sublimation. Several mechanisms are mentioned, but the sublimation mechanism, which rapidly builds up pressure under the particle and propels it away from substrate, is discussed in detail. From the kinetic energy given to the flying nanoparticle, an initial velocity of approximately 160 m/s ( approximately 360 miles/h) is calculated. The dependence of the observed flying mechanism on the rate of energy deposition (i.e., with nanosecond vs femtosecond laser pulses) is discussed.     

Reversible pH-driven conformational switching of tethered superoxide dismutase with gold nanoparticle enhanced surface plasmon resonance spectroscopy

A new class of surface-immobilized protein nanomachines can be reversibly actuated by cycling the solution pH between 2.5 and 12.3, which induces a conformational change, thereby modulating the thickness of superoxide dismutase (SOD1) tethered to the Au thin film. By placing Au nanoparticles (AuNP) atop the immobilized SOD1 by means of a gold-thiol assembly, the nanoscale motion of SOD1 at the interface produces mechanical work to lift and then lower the AuNP from the Au substrate by a distance of ca. 3 nm and transduces this motion into an easily measurable reflectivity change in the surface plasmon resonance (SPR) spectrum. As-made supported conjugate consisting of SOD1 and AuNP is quite robust and stable, and its operation in response to pH variations, which mirrors the conformational changes of responsive SOD1 at the interface, is found to be highly reversible and reproducible. This is the first demonstration of the development of novel solid-state sensors and/or switching devices based on substrate-bound protein conformational changes and AuNP enhanced SPR spectroscopy.