Vaporization of DyI3(s) and thermochemistry of the homocomplexes (DyI3)2(g) and (DyI3)3(g)

The vaporization of DyI₃(s) was investigated in the temperature range between 833 and 1053 K by the use of Knudsen effusion mass spectrometry. The ions DyI₂⁺, DyI₃⁺, Dy₂I₄⁺, Dy₂I₅⁺, Dy₃I₇⁺, and Dy₃I₈⁺ were detected in the mass spectrum of the equilibrium vapor. The gaseous species DyI₃, (DyI₃)₂, and (DyI₃)₃ were identified and their partial pressures determined. Enthalpies and entropies of sublimation resulted according to the second- and third-law methods. The following sublimation enthalpies at 298 K were determined for the gaseous species given in brackets: 274.8±8.2 kJ mol⁻¹ [DyI₃], 356.0±11.3 kJ mol⁻¹ [(DyI₃)₂], and 436.6±14.6 kJ mol⁻¹ [(DyI₃)₃]. The enthalpy changes of the dissociation reactions (DyI₃)₂=2 DyI₃ and (DyI₃)₃=3 DyI₃ were obtained as Δ_dH°(298)=193.3±5.6 and 390.3±13.0 kJ mol⁻¹, respectively.     

Determination de l'enthalpie de formation du pentafluorotellurate IV et hexafluorotellurate IV d'ammonium par calorimetrie de reaction

The standard enthalpies of formation of ammonium penta or hexafluorotellurate IV have been determined by reaction calorimetry in aqueous hydrogen fluoride as Δ_fH°₂₉₈ NH₄TeF₅ = -1547 ± 15 kJ.mol^-1 Δ_fH°₂₉₈ (NH)₄₂TeF₆ = -2026 ± 20 kJ.mol^-1     

Equilibrium sublimation and thermodynamic properties of SnSe and SnSe2

Knudsen effusion studies of the sublimation of polycrystalline SnSe and SnSe₂, prepared by annealing and chemical vapor transport reactions, respectively, have been carried out using vacuum microbalance techniques in the temperature ranges 736–967 K and 608–760 K, respectively. From experimental mass-loss data for the sublimation reaction SnSe(s) = SnSe(g), the recommended values for the heat of formation and absolute entropy of SnSe(s) were calculated to be ΔH°_298,f = ?86.4 ± 9.9 kJ · mol^?1 and S°₂₉₈ = 89.0 ± 7.1 J · K^?1 · mol^?1. From mass-loss data for the decomposition reaction \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm SnSe}_{\rm 2} ({\rm s)} = {\rm SnSe(s)} + \frac{1}{{\rm x}}{\rm Se}_{\rm x} ({\rm g) (x} = 2 - 8) $\end{document}, the recommended values for the heat of formation and absolute entropy of SnSe₂(s) were determined to be ΔH°_298,f = ?118.1 ± 15.1 kJ · mol^?1 and S°₂₉₈ = 111.8 ± 11.8 J · K^?1 mol^?1.     

Untersuchungen der Zersetzungsgleichgewichte und zur Phasenbreite der Molybdäntelluride

Investigation of Decomposition Equilibria and the Phase Fields of Molybdenum Tellurides The Te₂-pressure over Mo₃Te₄ and MoTe₂ as well as over equilibrium mixtures of Mo+Mo₃Te₄, Mo₃Te₄+MoTe₂, and MoTe₂+Te.l, respectively, has been measured directly between 1100 and 1373 K. No remarkable deviations from stoichiometry exist for MoTe₂ as well as for Mo₃Te₄. The coexistence pressures are for Mo/Mo₃Te₄: lg p/10⁵ Pa = 5.56—9879/T, and for Mo₃Te₄/MoTe₂: lg p/10⁵ Pa = 8.398—11790 /T. Third law enthalpies are derived: Δ_fH°(298, Mo₃Te₄) = —195.5±10 with S°(298) = 268, and Δ_fH°(298, αMoTe₂) = —89.5 ± 11 with S°(298) = 115.3 (values in kJ/mol and J mol^?1 K^?1, respectively).     

Bond dissociation energies and radical heats of formation in CH3Cl,CH2Cl2, CH3Br,CH2Br2, CH2FCl,and CHFCl2

An analysis of thermochemical and kinetic data on the bromination of the halomethanes CH_4–nX_n (X = F, Cl, Br; n = 1–3), the two chlorofluoromethanes, CH₂FCl and CHFCl₂, and CH₄, shows that the recently reported heats of formation of the radicals CH₂Cl, CHCl₂, CHBr₂, and CFCl₂, and the C? H bond dissociation energies in the matching halomethanes are not compatible with the activation energies for the corresponding reverse reactions. From the observed trends in CH₄ and the other halomethanes, the following revised ΔH°_f,298 (R) values have been derived: ΔH°_f(CH₂Cl) = 29.1 ± 1.0, ΔH°_f(CHCl₂) = 23.5 ± 1.2, ΔH_f(CH₂Br) = 40.4 ± 1.0, ΔH°_f(CHBr₂) = 45.0 ± 2.2, and ΔH°_f(CFCl₂) = ?21.3 ± 2.4 kcal mol^?1. The previously unavailable radical heat of formation, ΔH°_f(CHFCl) = ?14.5 ± 2.4 kcal mol^?1 has also been deduced. These values are used with the heats of formation of the parent compounds from the literature to evaluate C? H and C? X bond dissociation energies in CH₃Cl, CH₂Cl₂, CH₃Br, CH₂Br₂, CH₂FCl, and CHFCl₂.     

Thermochemical properties from ab initio calculations: π- and σ-Free radicals of importance in soot formation: •C3H3 (propargyl), •C4H3, •C13H9 (phenalenyl), •C6H5 (phenyl), •C10H7 (naphthyl), •C14H9 (anthryl), •C14H9 (phenanthryl), •C16H9 (pyrenyl), •C12H7 (acenaphthyl), and •C12H9 (biphenylyl)

The calculated difference in the standard heat of formation Δ Δ_fH°(298.15) of n- and i-C₄H₃^• free radicals is 37.9 kJ mol⁻¹ for G3MP2B3 and 45.0 kJ mol⁻¹ for CCSD(T)-CBS (W1U) calculations, which seems to preclude the direct even-carbon radical pathway to benzene and higher PAH (polycyclic aromatic hydrocarbon) formation including soot in a hydrocarbon flame. For the phenyl-type σ-radicals listed in the title, absolute values of Δ_fH°(298.15) have been calculated using G3MP2B3-computed values of bond dissociation energies D°(298.15) and combined with experimental values of Δ_fH° (298.15) for the parent hydrocarbon because of a slight systematic overprediction of the thermodynamic stability of large PAHs by the applied computational G3MP2B3 method. Standard enthalpies of formation Δ_fH°(298.15) as well as absolute entropies S° and heat capacities C°_p are given for a series of π- and σ-free radicals important to combustion as a function of temperature. A spread of roughly 40 kJ mol⁻¹ in the average C H bond strength of PAH leading to σ-radicals has been calculated, the lowest leading to 4-phenanthryl (463.6 kJ mol⁻¹), the highest leading to 2-biphenylyl radical (502.5 kJ mol⁻¹). © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 395–415, 2008     

Standard enthalpy of formation of metal (K,Ba, Li,Ca, Gd,Pb, Cu And Zn) salts of NTO

From measurements of the enthalpy of solution of metal salts of 3-nitro-1,2,4-triazol-5-one (NTO) in water, the standard enthalpies of formation of KNTO·H₂O, Ba(NTO)₂·3H₂O, LiNTO·2H₂O, Ca(NTO)₂·4H₂O and Gd(NTO)₃·7H₂O were determined as ?(676.9±2.6), ?(1627.0±2.5), ?(966.6.3±2.2), ?(1905.5±4.4) and ?(3020.1±6.4) kJ·mol^?1, respectively. From measurements of the enthalpy of precipitation of KNTO·H₂O crystal with Pb(NO₃)₂(aq), CuSO₄(aq) and Zn(NO₃)₂(aq), the standard enthalpies of formation of Pb(NTO)₂·H₂O, Cu(NTO)₂·2H₂O and Zn(NTO)₂·H₂O were determined as ?(247.4±5.9), ?(712.1±5.4) and ?(628.8±5.7) kJ·mol^?1, respectively.     

Zur thermischen Zersetzung und Sublimation des NiI2

Thermical Decomposition and Sublimation of NiI₂ In a membran manometer the thermical decomposition and the sublimation of NiI₂ was measured and in ampuls the sublimation of NiI₂ studied. From the total pressure and the sublimation pressure the enthalpy of formation ΔH°(f,NiI₂,f,298) = ?20 ± 2 kcal/mole and ΔH°(f,NiI₂,g,298) = +31.2 ± 5 kcal/mole was derived. The entropy dates are: S°(NiI₂,f,298) = 35 ± 2 cl, S°(NiI₂,g,298) = 80 ± 1 cl and S°(Ni₂I₄,g,298) = 128 ± 3 cl respectively. The Ni formed with NiI₂ an eutectical system.     

Beiträge zur Chemie der Oxidhalogenide von Molybdän und Wolfram. IX. Bildungsenthalpie und Sättigungsdruck des MoOBr3

From the enthalpy of solution of MoOBr₃ in NaOH/H₂O₂ the enthalpy of formation ΔH°(MoOBr₃,f,298) = ?109,5(±0,4) kcal/mol was derived. The sublimation of MoOBr₃ is connected with simultaneous decomposition (see “Inhaltsübersicht”). From the temperature function of the saturated vapor pressure the values ΔH°(subl., MoOBr₃, 298) = 36(±1,5) kcal/mol and ΔS°(subl., MoOBr₃, 298) = 56(±3) cl are calculated.     

The enthalpies of formation of bis-(benzene)molybdenum and of bis-(toluene)tungsten

Microcalorimetric measurements at 520–523 K of the heats of thermal decomposition and of iodination of bis-(benzene)molybdenum and of bis-(toluene)tungsten have led to the values (kJ mol^?): ΔH^o_f[Mo(η-C₆H₆)₂, c] = (235.3 ± 8) and ΔH^o_f[W(η⁶-C₇H₈)₂, c] = (242.2 ± 8) for the standard enthalpies of formation at 25°C. The corresponding ΔH^o_f(g) values, using available and estimated enthalpies of sublimation, are (329.9 ± 11) and 352.2 ± 11) respectively, from which the metalligand mean bond-dissociation enthalpies, $\text{D}$(Mo—benzene) = (247.0 ± 6) and $\text{D}$(W—toluene) = (304.0 ± 6) kJ mol^?1, are derived.     

Thermochemistry of inorganic sulfur compounds III. The standard molar enthalpy of formation at 298.15 K of US1.992 (β-uranium disulfide) by fluorine bomb calorimetry

A thoroughly analyzed specimen of β-uranium disulfide of composition US_1.992±0.002 has been studied by fluorine-bomb calorimetry. The standard molar energy of combustion: Δ_cU_m^o(US_1.992, cr, β, 298.15 K) = ?(4092.5±7.5) kJ·mol^?1 has been determined on the basis of the reaction: US_1.992(cr, β) + 8.976F₂(g) = UF₆(cr) + 1.992F₆(g). The standard molar enthalpy of formation: Δ_fH_m^o(US_1.992, cr, β, 298.15 K) = ?(519.7±8.0) kJ·mol^?1 was derived, and from that result Δ_fH_m^o(US₂, cr, 298.15 K) = ?(521±8) kJ·mol^?1 is estimated.     

Thermochemistry on the Complex of Erbium Perchlorate with L-α-Glutamic Acid [Er2（L-Glu）2（H2O）6]（ClO4）4·6H2O（s）

A coordination compound of erbium perchlorate with L-α-glutamic acid, [Er2（Glu）2（H2O）6]（ClO4）4·6H2O（s）, was synthesized. By chemical analysis, elemental analysis, FTIR, TG/DTG, and comparison with relevant literatures, its chemical composition and structure were established. The mechanism of thermal decomposition of the complex was deduced on the basis of the TG/DTG analysis. Low-temperature heat capacities were measured by a precision automated adiabatic calorimeter from 78 to 318 K. An endothermic peak in the heat capacity curve was observed over the temperature region of 290-318 K, which was ascribed to a solid-to-solid phase transition. The temperature Ttrans, the enthalpy △transHm and the entropy △transSm of the phase transition for the compound were determined to be： （308.73±0.45） K, （10.49±0.05） kJ·mol^-1 and （33.9±0.2） J·K^-1·mol^-1. Polynomial equation of heat capacities as a function of the temperature in the region of 78-290 K was fitted by the least square method. Standard molar enthalpies of dissolution of the mixture [2ErCl3·6H2O（s）＋2L-Glu（s）＋6NaClO4·H2O（s）] and the mixture {[Er2（Glu）2（H2O）6]（ClO4）4·6H2O（s）＋6NaCl（s）} in 100 mL of 2 mol·dm^-3 HClO4 as calorimetric solvent, and {2HClO4（1）} in the solution A＇ at T=298.15 K were measured to be, △dHm,1=（31.552±0.026） kJ·mol^-1, △dHm,2 = （41.302±0.034） kJ·mol^-1, and △dHm,3 = （ 14.986 ± 0.064） kJ·mol^-1, respectively. In accordance with Hess law, the standard molar enthalpy of formation of the complex was determined as △fHm-=-（7551.0±2.4） kJ·mol^-1 by using an isoperibol solution-reaction calorimeter and designing a thermochemical cycle.     

The enthalpies of formation of CH3Mn(CO)5 and of CH3Re(CO)5, and the strengths of the CH3Mn and CH3Re bonds

From measurements of the heats of iodination of CH₃Mn(CO)₅ and CH₃Re(CO)₅ at elevated temperatures using the ‘drop’ microcalorimeter method, values were determined for the standard enthalpies of formation at 25° of the crystalline compounds: ΔH^o_f[CH₃Mn(CO)₅, c] = ?189.0 ± 2 kcal mol^?1 (?790.8 ± 8 kJ mol^?1), ΔH^o_f[Ch₃Re(CO)₅,c] = ?198.0 ± kcal mol^?1 (?828.4 ± 8 kJ mo^?1). In conjunction with available enthalpies of sublimation, and with literature values for the dissociation energies of MnMn and ReRe bonds in Mn₂(CO)₁₀ and Re₂(CO)₁₀, values are derived for the dissociation energies: D(CH₃Mn(CO)₅) = 27.9 ± 2.3 or 30.9 ± 2.3 kcal mol^?1 and D(CH₃Re(CO)₅) = 53.2 ± 2.5 kcal mol^?1. In general, irrespective of the value accepted for D(MM) in M₂(CO)₁₀, the present results require that, D(CH₃Mn) = $\text{1}\text{2}$D(MnMn) + 18.5 kcal mol^?1 and D(CH₃Re) = $\text{1}\text{2}$D(ReRe) + 30.8 kcal mol^?1.     

RE(C5H8NS2)3(C12H8N2)的标准摩尔生成焓

在无水乙醇中, 使低水合氯化稀土 (RE = Ho, Er, Tm, Yb, Lu) 与吡咯烷二硫代氨基甲酸铵 (APDC)和1,10-菲咯啉 (o–phen•H₂O) 反应, 制得其三元固态配合物. 用化学分析和元素分析确定它的组成为RE(C₅H₈NS₂)₃(C₁₂H₈N₂) (RE = Ho, Er, Tm, Yb, Lu). IR光谱说明RE³⁺ 分别与3个PDC^–的6个硫原子双齿配位, 同时与o–phen的2个氮原子双齿配位, 配位数为8. 用精密转动弹热量计测定了它们的恒容燃烧热△_cU分别为(-16788.46 ± 7.74), (-15434.53 ± 8.28), (-15287.80 ± 7.31), (-15200.50 ± 7.22)和(-15254.34 ± 6.61) kJ•mol^-1; 并计算了它们的标准摩尔燃烧焓△_cH_m^θ和标准摩尔生成焓△_fH_m^θ分别为( -16803.95 ± 7.74), (-15450.02 ± 8.28), (-15303.29 ± 9.28), (-15215.99 ± 7.22), (-15269.83 ± 6.61) kJ • mol^-1和 (-1115.42 ± 8.94), (-2477.80 ± 9.15), (-2619.95 ± 10.44), (-2670.17 ± 8.22), (-2650.06 ± 8.49) kJ•mol^-1.     

Thermochemical Study on [La(Hsal)2•(tch)]•2H2O [Hsal＝salicylate ( ), tch＝thioprolinate (C4H6NO2S-)]

The product from reaction of lanthanum chloride heptahydrate with salicylic acid and thioproline, [La(Hsal)2•(tch)]•2H2O, was synthesized and characterized by IR, elemental analysis, molar conductance, thermogravimatric analysis and chemistry analysis. The standard molar enthalpies of solution of LaCl3•7H2O (s), [2C7H6O3 (s)], C4H7NO2S (s) and [La(Hsal)2•(tch)]•2H2O (s) in a mixed solvent of absolute ethyl alcohol, dimethyl sulfoxide (DMSO) and 3 mol•L－1 HCl were determined by calorimetry to be [LaCl3•7H2O (s), 298.15 K]＝(－102.36±0.66) kJ•mol－1, [2C7H6O3 (s), 298.15 K]＝(26.65±0.22) kJ•mol－1, [C4H7NO2S (s), 298.15 K]＝(－21.79±0.35) kJ•mol－1 and {[La(Hsal)2•(tch)]•2H2O (s), 298.15 K}＝(－41.10±0.32) kJ•mol－1. The enthalpy change of the reaction LaCl3•7H2O (s)＋2C7H6O3 (s)＋C4H7NO2S (s)＝[La(Hsal)2•(tch)]•2H2O (s)＋3HCl (g)＋5H2O (l) (Eq. 1) was determined to be ＝(41.02±0.85) kJ•mol－1. From date in the literature, through Hess’ law, the standard molar enthalpy of formation of [La(Hsal)2•(tch)]•2H2O (s) was estimated to be {[La(Hsal)2•(tch)]•2H2O (s), 298.15 K}＝(－3017.0±3.7) kJ•mol－1.     

Preparation and Thermal Chemical Property of Complexes of Zinc Nitrate with Trytophan

IntroductionZincisanessentialtraceelementtothelife .Manydiseasesarousedfromadeficiencyofzincelementhavere ceivedconsiderableattention .L α Aminoacidsarebasicunitsofproteins .L α Trytophanisoneoftheeightspeciesofaminoacidsindispensableforlife ,whichhastobeab sorbedfromfoodbecauseitcannotbesynthesizedinthehumanbody .InviewofthecomplexesofL α trytophanandessentialelementsasaddictiveswidelyusedinsuchfieldsasfoodstuff,medicineandcosmetic ,1 3theyhaveabroadenprospectforapplications .Briefly ,ab…     

Thermochemical properties of free radicals from G3MP2B3 calculations

For a set of 32 selected free radicals, energy minimum structures, harmonic vibrational wave numbers ω_e, principal moments of inertia I_A, I_B, and I_C, heat capacities C°_p(T), entropies S°(T), thermal energy contents H°(T) ? H°(0), and standard enthalpies of formation Δ_fH°(T) were calculated at the G3MP2B3 level of theory in the temperature range 200–3000 K. In this article, thermodynamic functions at T = 298.15 K are presented and compared with recent experimental values. The mean absolute deviation between calculated and experimental Δ_fH°(298.15) values resulted in 3.91 kJ mol^?1, which is close to the average experimental uncertainty of ± 3.55 kJ mol^?1. The influence of hindered rotation on thermodynamic functions is studied for isopropyl and tert‐butyl radicals. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 550–560, 2002     

Phase Chemistry Investigation on Cr(NO3)3‐Met‐H2O System

The solubility property of the ternary of Cr(NO₃)₃‐Met‐H₂O has been investigated in the whole concentration by the phase equilibrium method, and the phase diagram has been constructed. From the phase diagram, the congruently soluble complexes Cr(Met)(NO₃)₃·2H₂O (D) and Cr(Met)₂(NO₃)₃·2H₂O (E) have been prepared and characterized by chemical analysis, elemental analysis, IR and TG‐DTG. Their combustion energies have been determined by a RBC‐type I precision rotating‐bomb calorimeter, and their standard enthalpies of formation, Δf, Hθ_m, have been calculated as (‐1842.01 ± 2.13) kJ·mol^?1 and (‐1136.16 ± 4.45) kJ·mol^?1, respectively.     

The thermodynamic properties of DyBr3(s) and DyI3(s) from T=5 K to their melting temperatures

Low-temperature calorimetric measurements have been performed on DyBr₃(s) in the temperature range (5.5 to 420 K ) and on DyI₃(s) from T=4 K to T=420 K. The data reveal enhanced heat capacities below T=10 K, consisting of a magnetic and an electronic contribution. From the experimental data on DyBr₃(s) a C⁰_p,m (298.15 K) of (102.2±0.2) J·K⁻¹·mol⁻¹ and a value for {S⁰_m (298.15 K) − S⁰_m (5.5 K)} of (205.5±0.5) J·K⁻¹·mol⁻¹, have been obtained. For DyI₃(s), {S⁰_m (298.15 K) − S⁰_m (4 K)} and C⁰_p,m (298.15 K) have been determined as (226.9±0.5) J·K⁻¹·mol⁻¹ and (103.4±0.2) J·K⁻¹·mol⁻¹, respectively. The values for {S⁰_m (5.5 K) − S⁰_m (0)} for DyBr₃(s) and {S⁰_m (4 K) − S⁰_m (0)} for DyI₃(s) have been calculated, giving S⁰_m (298.15 K)=(212.3±0.9) J·K⁻¹·mol⁻¹ in case of DyBr₃(s) and S⁰_m (298.15 K) =(233.1±0.7) J·K⁻¹·mol⁻¹ for DyI₃(s). The high-temperature enthalpy increment has been measured for DyBr₃(s) in the temperature range (525 to 799 K) and for DyI₃(s) in the temperature range (525 to 627 K). From the results obtained and enthalpies of formation from the literature, thermodynamic functions for DyBr₃(s) and DyI₃(s) have been calculated from T→0 to their melting temperatures at 1151.0 K and 1251.5 K, respectively.     

Standard molar enthalpies of formation of KCdCl3 and K4CdCl6 by high-temperature drop calorimetry

Enthalpies of the synthesis reactions of the two compounds KCdCl₃(cr) and K₄CdCl₆(cr) from KCl(cr) and CdCl₂(cr) have been measured by drop calorimetry of solid samples of KCl, CdCl₂, KCdCl₃, and K₄CdCl₆ into melted mixtures of KCl and CdCl₂. For the two reactions: (1), CdCl₂(cr)+KCl(cr) = KCdCl₃(cr); and (2), CdCl₂(cr)+4KCl(cr) = K₄CdCl₆(cr), the experiments lead to the two standard molar enthalpies of reaction at 298.15 K: Δ₁H_m^o = ?(21.7±1.0) kJ·mol^?1 and Δ₂H_m^o = ?(39.0±3.8) kJ·mol^?1. These values are not in good agreement with those of previous workers.