The distonic ion ˙CH2CH2CO+ and its formation from ionized cyclopentanone

Collisional activation decomposition (CAD) spectra are interpreted as indicating that formation of ˙CH₂CH₂CO⁺ (1) from ionized cyclopentanone, succinic anhydride arid butyrolactone is important at 70 eV electron energy. However, photoionization appearance energy measurements and CAD spectra demonstrate that CH₃CH?C?O^+· (3) is formed from ionized cyclopentanone near threshold. Ab initio molecular orbital calculations place ΔH _f (1) about 36 kJ mol^?1 above ΔH _f (3).     

Etude structurale par spectrometrie infrarouge et raman des composes de coordination: bis(pyridine)- trichloro aluminium(III) et bis(pyridine)tribromo aluminium(III)

The compounds AlX₃-2Py (X = Cl or Br, Py = C₅H₅N or C₅D₅N) have been prepared by using a method based on an exchange of organic ligands. The infrared and Raman spectra, which have been recorded between 50 and 4000 cm^?1, give strong evidence for the existence of the anion AlCl₄^? (or AlBr₄^?) and show that the cation is AlX₂(Py)⁺₄. The comparison of the spectra with those of the compound NiX₂(Py)₄., and of the cations trans-AlX₂(THF)₄⁺ and cis-AlX₂(bipy)₂⁺ indicates that the cation AlX₂(Py)₄⁺ has the helical configuration (helical trans-octahedron) and allows the assignment of the vibrations.     

Calculation of Some Thermodynamic Properties and Detonation Parameters of 1‐Ethyl‐3‐Methyl‐H‐Imidazolium Perchlorate, [Emim][ClO4], on the Basis of CBS‐4M and CHEETAH Computations Supplemented by VBT Estimates

This paper estimates some thermochemical (in kcal mol^–1) and detonation parameters for the ionic liquid, [emim][ClO₄] and its associated solid in view of its investigation as an energetic material. The thermochemical values estimated, employing CBS‐4M computational methodology and volume‐based thermodynamics (VBT) include: lattice energy, U_POT([emim][ClO₄]) ≈? 123 ± 16 kcal · mol^–1; enthalpy of formation of the gaseous cation, Δ_fH°([emim]⁺, g) = 144.2 kcal · mol^–1 and anion, Δ_fH°([ClO₄]^–, g) = –66.1 kcal · mol^–1; the enthalpy of formation of the solid salt, Δ_fH°([emim][ClO₄],s) ≈? –55 ± 16 kcal · mol^–1 and for the associated ionic liquid, Δ_fH^o([emim][ClO₄],l) = –52 ± 16 kcal · mol^–1 as well as the corresponding Gibbs energy terms: Δ_fG°([emim][ClO₄],s) ≈? +29 ± 16 kcal · mol^–1 and Δ_fG^o([emim][ClO₄],l) = +24 ± 16 kcal · mol^–1 and the associated standard absolute entropies, of the solid [emim][ClO₄], S°₂₉₈([emim][ClO₄],s) = 83 ± 4 cal · K^–1 · mol^–1. The following combustion and detonation parameters are assigned to [emim][ClO₄] in its (ionic) liquid form: specific impulse (I_sp) = 228 s (monopropellant), detonation velocity (V_oD) = 5466 m · s^–1, detonation pressure (p_C–J) = 99 kbar, explosion temperature (T_ex) = 2842 K.     

The standard enthalpies of formation of alkoxy-NNO-azoxy compounds

The standard enthalpies of combustion Δ_c H ^o and formation Δ_f H ^o of seven alkoxy-NNO-azoxy compounds containing the-N⁺(O^?)=NO-characteristic group were determined by combustion in a calorimetric bomb in the atmosphere of oxygen. The contribution of this group to the Δ_f H ^o enthalpies of the substances studied was calculated. The Δ_f H ^o enthalpies found by the method of group contributions were in satisfactory agreement with experimental data.     

Enthalpy of formation of aqueous tungstate ion and of crystalline tungstic acid (H2WO4)

Calorimetric measurements of the enthalpy of reaction of WO₃(c) with excess OH^?(aq) have been made at 85°C. Similar measurements have been made with MoO₃(c) at both 85 and 25°C, to permit estimation of ΔH°=?13.4 kcal mol^?1 for the reaction WO₃(c)+2OH^?(aq)=WO^2?₄(aq)+H₂O(liq) at 25°C. Combination of this ΔH° with ΔH°_f for WO₃(c) leads to ΔH°_f=?256.5 kcal mol^?1 for WO^2?₄(aq). We also obtain ΔH°_f=?269.5 kcal mol^?1 for H₂WO₄(c). Both of these values are discussed in relation to several earlier investigations.     

Bond dissociation energies and radical heats of formation in CH3Cl,CH2Cl2, CH3Br,CH2Br2, CH2FCl,and CHFCl2

An analysis of thermochemical and kinetic data on the bromination of the halomethanes CH_4–nX_n (X = F, Cl, Br; n = 1–3), the two chlorofluoromethanes, CH₂FCl and CHFCl₂, and CH₄, shows that the recently reported heats of formation of the radicals CH₂Cl, CHCl₂, CHBr₂, and CFCl₂, and the C? H bond dissociation energies in the matching halomethanes are not compatible with the activation energies for the corresponding reverse reactions. From the observed trends in CH₄ and the other halomethanes, the following revised ΔH°_f,298 (R) values have been derived: ΔH°_f(CH₂Cl) = 29.1 ± 1.0, ΔH°_f(CHCl₂) = 23.5 ± 1.2, ΔH_f(CH₂Br) = 40.4 ± 1.0, ΔH°_f(CHBr₂) = 45.0 ± 2.2, and ΔH°_f(CFCl₂) = ?21.3 ± 2.4 kcal mol^?1. The previously unavailable radical heat of formation, ΔH°_f(CHFCl) = ?14.5 ± 2.4 kcal mol^?1 has also been deduced. These values are used with the heats of formation of the parent compounds from the literature to evaluate C? H and C? X bond dissociation energies in CH₃Cl, CH₂Cl₂, CH₃Br, CH₂Br₂, CH₂FCl, and CHFCl₂.     

Thermochemical properties from ab initio calculations: π- and σ-Free radicals of importance in soot formation: •C3H3 (propargyl), •C4H3, •C13H9 (phenalenyl), •C6H5 (phenyl), •C10H7 (naphthyl), •C14H9 (anthryl), •C14H9 (phenanthryl), •C16H9 (pyrenyl), •C12H7 (acenaphthyl), and •C12H9 (biphenylyl)

The calculated difference in the standard heat of formation Δ Δ_fH°(298.15) of n- and i-C₄H₃^• free radicals is 37.9 kJ mol⁻¹ for G3MP2B3 and 45.0 kJ mol⁻¹ for CCSD(T)-CBS (W1U) calculations, which seems to preclude the direct even-carbon radical pathway to benzene and higher PAH (polycyclic aromatic hydrocarbon) formation including soot in a hydrocarbon flame. For the phenyl-type σ-radicals listed in the title, absolute values of Δ_fH°(298.15) have been calculated using G3MP2B3-computed values of bond dissociation energies D°(298.15) and combined with experimental values of Δ_fH° (298.15) for the parent hydrocarbon because of a slight systematic overprediction of the thermodynamic stability of large PAHs by the applied computational G3MP2B3 method. Standard enthalpies of formation Δ_fH°(298.15) as well as absolute entropies S° and heat capacities C°_p are given for a series of π- and σ-free radicals important to combustion as a function of temperature. A spread of roughly 40 kJ mol⁻¹ in the average C H bond strength of PAH leading to σ-radicals has been calculated, the lowest leading to 4-phenanthryl (463.6 kJ mol⁻¹), the highest leading to 2-biphenylyl radical (502.5 kJ mol⁻¹). © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 395–415, 2008     

Heat of formation of Benzophenone Oxide

The heat of formation of benzophenone oxide, Ph₂CO₂, was measured using photoacoustic calorimetry. The enthalpy of the reaction Ph₂CN₂ + O₂ → Ph₂CO₂ + N₂ was found to be ?48.0 ±0.8 kcal mol^?1 and ΔH_f(Ph₂CN₂) was determined by measuring the reaction enthalpy for Ph₂CN₂ + EtOH → Ph₂CHOEt + N₂ (?53.6 ±1.0 kcal mol^?1). Taking ΔH_f(PhCHOEt) = ?10.6 kcal mol^?1 led to ΔH_f(Ph₂CN₂) = 99.2 ± 1.5 kcal mol^?1 and hence to ΔH_f(Ph₂CO₂) = 51.1 ± 2.0 kcal mol^?1. The results imply that the self-reaction of benzophenone oxide i.e., 2Ph₂CO₂ → 2Ph₂CO + O₂ is exothermic by ?76.0 ±4.0 kcal mol^?1.     

Thermolabile kohlenwasserstoffe. XXVI. Bildungsenthalpie von 1,1,2,2-tetra-tert-butylethan

The title compound (1) was prepared in high purity by reducing 3,3-dibromo-2,2,4,4-tetra-methylpentane (2) with magnesium in the last step. The heat of combustion, ΔH⁰_c(c), of 1 was measured using an aneroid isoperibol microcalorimeter and the heat of sublimation, ΔH_sub, was obtained from the vapour pressure (35–93°C) measured in a flow system. The results: ΔH⁰_c(c) = ?2913.3(±0.9), ΔH⁰_f(c) = ?77.6(±0.9) and ΔH⁰_f(g) = ?59.9(±0.9) kcal mol^?1 lead to an outstandingly high value for the excess strain enthalpy (H_s = 66.3 kcal mol^?1) revealing strong van der Waals repulsions in this highly crowded alkane.     

The standard thermodynamic properties of 4<Emphasis Type="Italic">f</Emphasis> metal trichlorides

The enthalpies of sublimation Δ_sub H ⁰(298) of 4f metal trichlorides were calculated by the second and third laws of thermodynamics from saturated vapor pressures using the thermodynamic functions of the condensed and gaseous states suggested by us. The set of the Δ_sub H ^o(298) enthalpies was analyzed to determine the most reliable values. The enthalpies of atomization found from these values were compared with those calculated from the measured equilibrium constants of gas phase reactions with the participation of the compounds under consideration and the enthalpies of atomization found from the experimental appearance potentials AP(Ln⁺/LnCl₃). Recommended Δ_at H ^o(298) values were obtained for all the 4f metal trichlorides.     

A thermochemical study of dissociative ionization of 4,4-dimethyl-1-thia-4-silacyclohexane and 2,3,3-trimethyl-1-thia-3-silacyclopentane. Decomposition pathways to produce a dimethylsilanethione ion-radical [Me2SiS]+•

The dissociative ionization of 4,4-dimethyl-1-thia-4-silacyclohexane (I) and 2,3,3-trimethyl-1-thia-3-silacyclopentane(II) has been studied by electron photoionization (PI) mass spectrometric methods. The molecular ion fragmentation is mainly related to the loss of ethylene and results in a [Me₂SiSC₂H₄]^+? (m/z 118) ion-radical (A). Further loss of ethylene from A produces a dimethylsilanethione [Me₂SiS]^+? (m/z 90) ion-radical (B). The latter is the most abundant ion in the mass spectra of I and II at 70 eV.The ionization energies (IE) of I (8.22 ± 0.07 eV) and II (8.06 ± 0.03 eV) and the appearance energies (AE) of ion-radicals A and B have been determined. Also, the following heats of formation were calculated (kJ/mol): ΔH_f⁰(I) = ?31.1; ΔH_f⁰(II) = ?65.8; ΔH_f⁰(M_I^+?) = 762.0; ΔH_f⁰(M_II^+?)= 712.1; ΔH_f⁰(A)_aver = 780.2; ΔH_f⁰(B)_aver = 847.7.     

Definitive heat of formation of methylenimine,CH2NH,and of methylenimmonium ion,CH2NH2+, by means of W2 theory

A long‐standing controversy concerning the heat of formation of methylenimine has been addressed by means of the W2 (Weizmann‐2) thermochemical approach. Our best calculated values, ΔH°_f,298(CH₂NH) = 21.1±0.5 kcal/mol and ΔH°_f,298(CH₂NH₂⁺) = 179.4±0.5 kcal/mol, are in good agreement with the most recent measurements but carry a much smaller uncertainty. As a byproduct, we obtain the first‐ever accurate anharmonic force field for methylenimine: upon consideration of the appropriate resonances, the experimental gas‐phase band origins are all reproduced to better than 10 cm^?1. Consideration of the difference between a fully anharmonic zero‐point vibrational energy and B3LYP/cc‐pVTZ harmonic frequencies scaled by 0.985 suggests that the calculation of anharmonic zero‐point vibrational energies can generally be dispensed with, even in benchmark work, for rigid molecules. © 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1297–1305, 2001     

The absolute rate constant for the metathesis t-C4H9• + DI → C4H9D + I• and the heat of formation of the t-butyl radical

The Arrhenius parameters for the title reaction have been measured in a very-low-pressure pyrolysis apparatus in the temperature range 644–722 K and are given by log k₂ (M^?1 · sec^?1) = 9.68 - 2.12/θ, where θ = 2.303RT in kcal/mol. Together with the published Arrhenius parameters for the reverse reaction from iodination studies, they result in a standard heat of formation of the t-butyl radical of 8.4 kcal/mol, accepting S⁰(C₄H₉·) = 72.2 e.u. at 300 K from other kinetic data, and thus confirm the accepted value for ΔH_f⁰(t-C₄H₉·), at variance with recent investigations which yielded significantly higher values. This value for ΔH_f⁰(t-C₄H₉·) results in a bond-dissociation energy (BDE) for isobutane of 92.7 kcal/mol.     

Thermochemical properties of free radicals from G3MP2B3 calculations

For a set of 32 selected free radicals, energy minimum structures, harmonic vibrational wave numbers ω_e, principal moments of inertia I_A, I_B, and I_C, heat capacities C°_p(T), entropies S°(T), thermal energy contents H°(T) ? H°(0), and standard enthalpies of formation Δ_fH°(T) were calculated at the G3MP2B3 level of theory in the temperature range 200–3000 K. In this article, thermodynamic functions at T = 298.15 K are presented and compared with recent experimental values. The mean absolute deviation between calculated and experimental Δ_fH°(298.15) values resulted in 3.91 kJ mol^?1, which is close to the average experimental uncertainty of ± 3.55 kJ mol^?1. The influence of hindered rotation on thermodynamic functions is studied for isopropyl and tert‐butyl radicals. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 550–560, 2002     

对氨基苯甲酸热力学性质的量热和热分析研究

在80～400 K温区,用高精度全自动绝热量热仪测定了对氨基苯甲酸摩尔热容,得到摩尔热容随温度的变化的关系式为：     

Hydrolysis of methyltin(IV) trichloride in aqueous NaCl and NaNO3 solutions at different ionic strengths and temperatures

The hydrolysis of methyltin(IV) trichloride (CH₃SnCl₃) has been studied in aqueous NaCl and NaNO₃ solutions (0 < I/mol dm⁻³ ≤ 1), at different temperatures (15 ≤ T/°C ≤ 45) by­potentiometric measurements (H⁺‐glass electrode). By considering the generic hydrolytic <?tw=97.2%>reaction pCH₃Sn³⁺ + qH₂O = (CH₃Sn)_p(OH)_q^3p−q<?tw>­+ qH⁺ (logβ_pq), we have the formation of five species and logβ₁₂ = −3.36, logβ₁₃ = −8.99, logβ₁₄ = −20.27 and logβ₂₅ = −7.61. The first hydrolysis step is measurable only at very low pH values and was not determined: a rough estimate of the hydrolysis constant is logβ₁₁ = −1.5 (± 0.5). The dependence on ionic strength of logβ_pq is quite different in NaNO₃ and NaCl solutions, and the formation at low pH values of the species CH₃Sn(OH)Cl⁺ has been found with logβ = −1.40. Hydrolysis constants strongly depend on temperature and from the relationships logβ_pq = f(T), ΔH ° values have been calculated. Speciation problems of CH₃Sn³⁺ in aqueous solution are discussed. Copyright © 1999 John Wiley & Sons, Ltd.     

Two isomorphous transition metal complexes containing a protonated diaminopurine ligand: diaquabis(2,6‐diamino‐7H‐purin‐1‐ium‐κN9)bis(homophthalato‐κO)nickel(II) tetrahydrate and the cobalt(II) analogue

The two isomorphous title compounds, [M(C₅H₇N₆)₂(C₉H₆O₄)₂(H₂O)₂]·4H₂O or M²⁺(Hdap⁺)₂(hpt²⁻)₂(H₂O)₂·4H₂O {where dap is 2,6‐diaminopurine, H₂hpt is homophthalic acid [2‐(2‐carboxyphenyl)acetic acid] and M is Ni^II or Co^II}, consist of neutral M²⁺(Hdap⁺)₂(hpt²⁻)₂(H₂O)₂ monomers, where the M^II cation lies on an inversion centre and its MN₂O₄ octahedral environment is defined by one N atom (from Hdap⁺), two O atoms (from one hpt²⁻ dianion and one water molecule) and their inversion images. The structures are unusual in that the Hdap⁺ cation occurs in an uncommon protonated state (as 2,6‐diamino‐7H‐purin‐1‐ium) and both ligands bind in an unprecedented monodentate fashion. The existence of a large number of donors and acceptors for hydrogen bonding, together with π–π interactions, leads to a rather complex three‐dimensional structure.     

Enthalpies of formation of acetyl radicals

The database on the enthalpies of formation (Δ_f H ^○) of aliphatic acetyl radicals of the RC·(O) type is analyzed and extended. Δ_f H ^○ values are estimated for the first time for three compounds on the basis of experimental data. The data were analyzed using the additive group approach with the determination and correction of parameters. Good correspondence between the Δ_f H ^○(RC·(O)) values calculated according to parameters with experimental data is observed.     

Thermochemical properties from G3MP2B3 calculations,Set‐2: Free radicals with special consideration of CH2CH?C•CH2, cyclo−•C5H5, •CH2OOH,HO?•CO,and HC(O)O•

After a set of 32 free radicals was presented (Int J Chem Kin 34, 550–560, 2002), an additional 60 free radicals (Set‐2) were studied and characterized by energy minimum structures, harmonic vibrational wave numbers ω_e, moments of inertia I_A, I_B, and I_C, heat capacities C^o_p(T), standard entropies S^o(T), thermal energy contents H^o(T) ? H^o(0), and standard enthalpies of formation Δ_fH^o(T) at the G3MP2B3 level of theory. Thermodynamic functions at T = 298.15 K are presented and compared with recent experimental values where these are available. The mean absolute deviation between calculated and experimental Δ_fH^o(298.15) values by the previous set of 32 radicals is 3.91 kJ mol^?1. For the sake of comparison, only 49 species out of the 60 radicals of Set‐2 are characterized by experimental enthalpies of formation, and the corresponding mean absolute deviation between calculated and experimental Δ_fH^o(298.15) values is 8.96 kJ mol^?1. This situation is cause for demand of more and also more accurate experimental values. In addition to the above properties, parent molecules of a large set of the respective radicals are calculated to obtain bond dissociation energies D^o(298.15). Radical stabilization owing to resonance is discussed using the complete sets of total atomic spin densities ρ as a support. In particular, a short review about recent developments of the first‐order Jahn–Teller radical c‐C₅H₅^? is presented. In addition, radicals with negative bond energies are described, such as ^?CH₂OOH where the reaction path to CH₂O + HO^? has been calculated, as well as radicals which have two different parent molecules, for example C?N? O^?. For the reaction HO^? + CO → H^? + CO₂, two reaction paths are characterized by a total of 14 stationary points where the intermediate radicals HO? ^?CO and HC(O)O^? are involved. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 661–686, 2004     

Protonation enthalpies in fluorosulfonic acid using ab initio self-consistent reaction field theory

Electrostatic solvation free energies were computed for several small neutral bases and their conjugate acids using a continuum solvation model called the self-consistent isodensity polarizable continuum model (SCIPCM). The solvation energies were computed at the restricted Hartree–Fock (RHF) and second-order Møller–Plesset (MP2) levels of theory, as well as with the Becke3–Lee–Yang–Parr (B3LYP) density functional theory, using the standard 6–31G** Gaussian basis set. The RHF solvation energies are similar to those computed at the correlated MP2 and B3LYP theoretical levels. A model for computing protonation enthalpies for neutral bases in fluorosulfonic acid solvent leads to the equation ΔH(B)=−PA(B)+ΔE_t(BH⁺)−ΔE_t(B)+β, where PA(B) is the gas phase proton affinity for base B, ΔE_t(BH⁺) is the SCIPCM solvation energy for the conjugate acid, and ΔE_t(B) is the solvation energy for the base. A fit to experimental values of ΔH(B) for 10 neutral bases (H₂O, MeOH, Me₂O, H₂S, MeSH, Me₂S, NH₃, MeNH₂, Me₂NH, and PH₃) gives β=238.4±2.9 kcal/mol when ΔΔE_t is computed using the 0.0004 e⋅bohr⁻³ isodensity surface for defining the solute cavity at the RHF/6–31G** level. The model predicts that for carbon monoxide ΔH(CO)=10 kcal/mol. Thus, protonation of CO is endothermic, and the conjugate acid HCO⁺ (formyl cation) behaves as a strong acid in fluorosulfonic acid. © 1998 John Wiley & Sons, Inc. J Comput Chem 19: 250–257, 1998