Temperature-dependent self-assembly and mixing behavior of symmetrical single-chain bolaamphiphiles

The temperature-dependent self-assembly and the mixing behavior of symmetrical single-chain bolaamphiphiles with different polymethylene chain lengths and different headgroup structures were investigated in water by differential scanning calorimetry (DSC), cryo transmission electron microscopy (cryo-TEM), and small angle neutron scattering (SANS). The even-numbered polymethylene-1,omega-bis(phosphocholines) (PC-C n-PC) are known to form nanofibers composed of stretched molecules with an all- trans alkyl chain conformation (Drescher, S.; Meister, A.; Blume, A.; Karlsson, G.; Almgren, M.; Dobner, B. Chem.Eur. J. 2007, 13, 5300-5307). The odd-numbered analogues were synthesized to study a possible even-odd effect of these bolaamphiphiles during their aggregation in water. In addition to these bolaamphiphiles with phosphocholine headgroups, a new series of polymethylene-1,omega-bis(phosphodimethylethanolamines) (Me2PE-Cn-Me2PE) with smaller headgroup sizes was synthesized. These bolaamphiphiles show an additional fiber-fiber transition when the alkyl chain length exceeds 26 carbon atoms. The mixing behavior of both types of bolaamphiphiles indicates that differences in the alkyl chain length up to six carbon atoms are tolerated within the fiber structure. The mixing of two Me2PE-Cn-Me2PE or PC-Cn-PC type bolaamphiphiles with different alkyl chain lengths offers the possibility to adjust the temperature, where the cross-linking of the fibers is disrupted and where the fibers break apart. As a consequence, temperature switchable hydrogels are obtained that can be fine-tuned for drug delivery applications. The comparison with dotriacontane-1,32-diyl-bis[2-(methylammonio)-ethylphosphate] (MePE-C32-MePE), a new bolaamphiphile with even smaller phosphomonomethylammonio headgroups, illustrates the importance of the headgroup size for the aggregation behavior. This bolaamphiphile self-assembles exclusively into lamellar structures, and this aggregate type persists in mixtures with the fiber forming Me2PE-C32-Me2PE.     

Temperature-dependent aggregation behavior of symmetric long-chain bolaamphiphiles at the air-water interface

The behavior of the symmetric long-chain bolaamphiphiles dotriacontane-1,32-diyl bis[2-(trimethylammonio)ethyl phosphate] (PC-C32-PC), and dotriacontane-1,32-diyl bis[2-(dimethylammonio)ethyl phosphate] (Me(2)PE-C32-Me(2)PE) at the air-water interface was investigated by means of temperature-dependent film-balance measurements and Brewster angle microscopy. Upon compression of the monolayer the isotherms show a strong surface pressure increase. We assume that at high pressure the monolayer consists of molecules in a reversed U-shaped conformation. At an area of 0.9-1.1 nm(2) per molecule a plateau is reached for both bolaamphiphiles, which marks the beginning of an aggregate formation on the water surface. The plateau pressure increases with increasing temperature. For PC-C32-PC at 6.7 degrees C curved shorter fibrous domains with a diameter of 20-30 mum are seen on the water surface, whereas at 29.2 degrees C stripelike domains with a thickness of 200-500 mum are observed. Isotherms recorded within this temperature range show a characteristic break within the steep slope marking a region where a mixture or a hybrid form of both structures exists. Me(2)PE-C32-Me(2)PE in its zwitterionic state at low pH forms microcrystals on the water surface, whose formation is kinetically retarded. Depending on the temperature, the aqueous subphase is more or less homogeneously covered with a crystalline-like film. In contrast, no aggregates are observed at pH 10 when the bolaamphiphile is negatively charged.     

Evidence for a reverse U-shaped conformation of single-chain bolaamphiphiles at the air-water interface

Infrared reflection absorption spectroscopy and X-ray reflectivity have been used to elucidate the molecular orientation and hydrocarbon chain conformation and packing of the symmetric long-chain bolaamphiphiles dotriacontane-1,1'-diyl-bis-[2-(trimethylammonio)ethylphosphate] (PC-C32-PC) and dotriacontane-1,1'-diyl-bis-[2-(dimethylammonio)ethylphosphate] (Me2PE-C32-Me2PE) at the air-water interface. At low surface pressures, these bipolar amphiphiles are found to lie flat on the water surface with a disordered chain. With increasing surface pressure, the alkyl chain becomes more ordered. Concomitantly, the chain is bent pointing into the air, whereas both polar headgroups keep contact with the water subphase. At an area of 0.9-1.1 nm2 per molecule, a surface pressure plateau is reached for both bolaamphiphiles, where the molecules adopt a reverse U-shaped conformation with a strongly tilted alkyl chain. Further compression leads to the formation of 3-D aggregates.     

Temperature-dependent behavior of a symmetric long-chain bolaamphiphile with phosphocholine headgroups in water: from hydrogel to nanoparticles

The temperature-dependent self-assembly of the single-chain bolaamphiphile dotriacontan-1,1'-diyl-bis[2-(trimethylammonio)ethyl phosphate] (PC-C32-PC) was investigated by transmission electron microscopy (TEM), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FT-IR), X-ray scattering, rheological measurements, and dynamic light scattering (DLS). At room temperature this compound, in which two phosphocholine headgroups are connected by a C(32) alkyl chain, proved to be capable of gelling water very efficiently by forming a dense network of nanofibers (Kohler et al. Angew. Chem., Int. Ed. 2004, 43, 245). A specific feature of this self-assembly process is that it is not driven by hydrogen bonds but solely by hydrophobic interactions of the long alkyl chains. The nanofibers have a thickness of roughly the molecular length and show a helical superstructure. A model for the molecular structure of the fibrils which considers the extreme constitution of the bolaamphiphile is proposed. Upon heating the suspensions three different phase transitions can be detected. Above 49 degrees C, the temperature of the main transition where the alkyl chains become "fluid", a clear low-viscosity solution is obtained due to a breakdown of the fibrils into smaller aggregates. Through mechanical stress the gel structure can be destroyed as well, indicating a low stability of these fibers. The gel formation is reversible, but as a drastic rearrangement of the molecules takes place, metastable states occur.     

pH-Controlled Supramolecular Self-Assembly of Naphthalenediimide Appended l-Alanine and Ethylenediamine Asymmetric Bolaamphiphile

Design, synthesis and characterization of novel (2S)-2-[7-(2-aminoethyl)-1,3,6,8-tetraoxo-3,6,7,8-tetrahydrobenzo[lmn][3,8]phenanthrolin-2(1H)-yl]propanoic acid ( 1 ) bolaamphiphile, which combine naphthalene diimide (NDI) appended with l -alanine at one end of imide and ethylenediamine at the other end. An l -alanine bearing NDI-based asymmetric bolaamphiphile self-assembled at various pH ranging from 2 to 10 forms a variety of supramolecular nanostructures. The UV-Vis and emission spectroscopic techniques employed for the optical and photophysical properties study of bolaamphiphile 1 at various pH values. It was revealed that the change in pH alters both the optical and photophysical properties of bolaamphiphile 1 . Theoretical calculations used to investigate the electronic properties of the bolaamphiphile 1 . Dynamic light scattering experiments displayed formation of aggregates in solution and scanning electron microscopy (SEM) was used to visualize the nanostructures formed on silicon wafers. Furthermore, the X-ray diffraction was used to determine the nanostructure's packing properties i. e. crystalline/amorphous. Experimental circular dichroism (CD) spectroscopy results inferred and revealed the induction of chirality into the supramolecular systems, which was shown to be pH dependent. This study clearly demonstrates the manipulation of pH can control/tune chiral supramolecular structures and provide future methods for the development of chiral recognition and catalysis study.     

Synthesis, structure, reactivity, and thermal isomerization of boron-substituted 13-vertex cobaltacarboranes (eta5-Cp)Co(eta6-R2C2B10Me8H2) (R = H, Et)

Reduction of boron-substituted carboranes o-R2C2B10Me8H2 (R = H, Et), thermal isomerization, and nucleophilic reaction of the resultant 13-vertex cobaltacarboranes were studied. Reaction of o-C2B10Me8H4 (1) with excess potassium metal in tetrahydrofuran (THF) gave, after recrystallization from a THF solution of 18-crown-6 ether, [[K(18-crown-6)(THF)2][K(18-crown-6)]][[4-(18-crown-6)-2,3,5,8,9,11,12,13-Me8-4,1,6-KC2B10H4]2] (2) in 78% yield. Interaction of 1 with excess sodium or potassium metal in THF, followed by treatment with CoCl2/CpNa and then aerobatic oxidation, afforded two boron-substituted 13-vertex cobaltacarboranes, 4-Cp-2,3,5,8,9,11,12,13-Me8-4,1,6-CoC2B10Me8H4 (3) and 4-Cp-2,3,5,9,10,11,12,13-Me8-4,1,6-CoC2B10Me8H4 (4), in 15% and 8% yield, respectively. Subsequently, thermal isomerization of 3 and 4 yielded another two new isomers, 4-Cp-2,3,5,6,8,11,12,13-Me8-4,1,9-CoC2B10Me8H4 (5) and 4-Cp-2,3,5,6,7,11,12,13-Me8-4,1,9-CoC2B10Me8H4 (6). Treatment of 3 or 4 with strong bases such as nBuLi and MeLi generated unexpected nucleophilic substitution products 4-nBuCp-2,3,5,8,9,11,12,13-Me8-4,1,6-CoC2B10Me8H4 (7), 4-nBuCp-2,3,5,9,10,11,12,13-Me8-4,1,6-CoC2B10Me8H4 (8a), and 4-MeCp-2,3,5,9,10,11,12,13-Me8-4,1,6-CoC2B10Me8H4 (8b) in good yields. Under the same reaction conditions, however, only one 13-vertex cobaltacarborane, 4-Cp-1,9-Et2-2,5,6,7,8,11,12,13-Me8-4,1,9-CoC2B10Me8H4 (10), was isolated when o-Et2C2B10Me8H2 (9) was used as the starting material. Complex 10 is a thermodynamically stable product and has a substitution pattern different from that of 3-6. These results show that the substituents on either the cage carbon or boron atoms have an important effect on the formation and thermal stability of the 13-vertex metallacarboranes. The formation of these complexes can be rationalized by the diamond-square-diamond mechanism.     

Synthesis and structural characterization of mono- and bisfunctional o-carboranes

Functionalized o-carboranes are interesting ligands for transition metals. Reaction of LiC2B10H11 with Me2NCH2CH2Cl in toluene afforded 1-Me2NCH2CH2-1,2-C2B10H11 (1). Treatment of 1 with 1 equiv. of n-BuLi gave [(Me2NCH2CH2)C2B10H10]Li ([1]Li), which was a very useful synthon for the production of bisfunctional o-carboranes. Reaction of [1]Li with RCH2CH2Cl afforded 1-Me2NCH2CH2-2-RCH2CH2-1,2-C2B10H10 (R = Me2N (2), MeO (3)). 1 and 2 were also prepared from the reaction of Li2C2B10H10 with excess Me2NCH2CH2Cl. Treatment of [1]Li with excess MeI or allyl bromide gave the ionic salts, [1-Me3NCH2CH2-2-Me-1,2-C2B10H10][I] (4) and [1-Me2N(CH2=CHCH2)CH2CH2-2-(CH2=CHCH2)-1,2-C2B10H10][Br] (6), respectively. Interaction of [1]Li with 1 equiv. of allyl bromide afforded 1-Me2NCH2CH2-2-(CH2=CHCH2)-1,2-C2B10H10 (5). Treatment of [1]Li with excess dimethylfulvene afforded 1-Me2NCH2CH2-2-C5H5CMe2-1,2-C2B10H10 (7). Interaction of [1]Li with excess ethylene oxide afforded an unexpected product 1-HOCH2CH2-2-(CH2=CH)-1,2-C2B10H10 (8). 1 and 3 were conveniently converted into the corresponding deborated compounds, 7-Me2NHCH2CH2-7,8-C2B9H11 (9) and 7-Me2NHCH2CH2-8-MeOCH2CH2-7,8-C2B9H10 (10), respectively, in MeOH-MeOK solution. All of these compounds were characterized by various spectroscopic techniques and elemental analyses. The solid-state structures of 4 and 6-10 were confirmed by single-crystal X-ray analyses.     

Metallocene polymerization catalyst ion-pair aggregation by cryoscopy and pulsed field gradient spin-echo NMR diffusion measurements

Pulsed field gradient spin-echo (PGSE) NMR and cryoscopic measurements have been performed on a series of homogeneous metallocene polymerization catalyst ion-pairs to determine if aggregation is a significant phenomenon under typical polymerization conditions. Cryoscopic measurements on [(Me5Cp)2ZrMe]+[MeB(C6F5)3]- (1), [rac-Et(Indenyl)2ZrMe]+[MeB(C6F5)3]- (2), [(1,2-Me2Cp)2ZrCHTMS2]+[MeB(C6F5)3]- (3), [Me2Si(Me4Cp)(t-BuN)TiMe]+[MeB(C6F5)3]- (4), [Me2Si(Me4Cp)(t-BuN)ZrMe]+[MeB(C6F5)3]- (5), and [Me2C(Fluorenyl)(Cp)ZrMe]+[MeB(C6F5)3]- (6) were carried out in benzene in the 10-18 millimolal concentration range. PGSE measurements, using (p-tolyl)4Si as an internal standard, were also performed on catalyst ion-pairs 1, 4, 6, [(Me5Cp)2ThMe]+[B(C6F5)4]- (7), [(Me2SiCp2)ZrMe]+[MeB(C6F5)3]- (8), and [Cp2ZrMe]+[MeB(C6F5)3]- (9) in the 0.8-10.0 millimolar range. All results are consistent with a 1:1 ion-pair structural model and show little evidence for ion-quadruples or higher-order aggregates.     

Complexes of the heavier alkaline Earth metals Ca, Sr, and Ba with O-functionalized phosphanide ligands

Metathesis reactions between either SrI(2) or BaI(2) and 2 equiv of the potassium phosphanide [[(Me(3)Si)(2)CH]-(C(6)H(4)-2-OMe)P]K yield, after recrystallization, the complexes [[([Me(3)Si](2)CH)(C(6)H(4)-2-OMe)P](2)M(THF)(n)] [M = Sr, n = 2 (5); Ba, n = 3 (6)]. Similar metathesis reactions between MI(2) and 2 equiv of the more sterically demanding potassium phosphanide [[(Me(3)Si)(2)CH](C(6)H(3)-2-OMe-3-Me)P]K yield the chemically isostructural complexes [[([Me(3)Si](2)CH)(C(6)H(3)-2-OMe-3-Me)P](2)M(THF)(2)] [M = Ca (9), Sr (7), Ba (8)]. Compounds 5-9 have been characterized by multi-element NMR spectroscopy and X-ray crystallography. Complex 9 is thermally unstable and decomposes at room temperature to give the tertiary phosphane [(Me(3)Si)(2)CH](C(6)H(3)-2-OMe-3-Me)P(Me) and an unidentified Ca-containing product. Compounds 5 and 6 also decompose at elevated temperatures to give the corresponding tertiary phosphane [(Me(3)Si)(2)CH](C(6)H(4)-2-OMe)P(Me) and intractable metal-containing products. The decomposition of 5, 6, and 9 suggests that these compounds undergo an intramolecular methyl migration from the O atom in one phosphanide ligand to the P atom of an adjacent phosphanide ligand to give species containing dianionic alkoxo-phosphanide ligands.     

Observation of an Unusual Molecular Switching Device. The Position of One 1,2-Dimethylimidazole Switched "On" or "Off" the Rotation of the Other 1,2-Dimethylimidazole in cis,cis,cis-Ru(II)Cl(2)(Me(2)SO)(2)(1,2-dimethylimidazole)(2)

Some cis,cis,cis-RuX(2)(Me(2)SO)(2)(1,2-Me(2)Im)L complexes [L = 1,2-Me(2)Im (1,2-dimethylimidazole) or Me(3)Bzm (1,5,6-trimethylbenzimidazole), X = Cl or Br, and Me(2)SO = S-bonded DMSO] have been synthesized and their rotamers studied in CDCl(3). From 2D NMR data, cis,cis,cis-RuCl(2)(Me(2)SO)(2)(1,2-Me(2)Im)(Me(3)Bzm) has 1,2-Me(2)Im in position "a" (cis to both Me(2)SO's and cis to "b") and Me(3)Bzm in position "b" (trans to one Me(2)SO and cis to the other). There are two stable atropisomers [head-to-tail (HT, 84%) and head-to-head (HH, 16%), defining the aromatic H of Ru-N-C-H as head for both ligands]. Me(3)Bzm has the same orientation in both atropisomers. In this orientation, the unfavorable interligand steric interactions of Me(3)Bzm with the Me(2)SO and 1,2-Me(2)Im ligands appear to be countered by favorable electrostatic attraction between the delta+ N(2)CH moiety of Me(3)Bzm and the delta- cis Cl ligands. The 1,2-Me(2)Im lacks a delta+ N(2)CH group, and its orientation is dominated by steric effects of the 2-Me group. The NMR spectrum of cis,cis,cis-RuCl(2)(Me(2)SO)(2)(1,2-Me(2)Im)(2) is consistent with four rotamers in restricted rotation about both Ru-N bonds: two HH and two HT. 2D NMR techniques (NOESY and ROESY) afforded complete proton signal assignments. The ligand disposition could be assessed from the large chemical shift dispersion of some 1,2-Me(2)Im ligand signals (Delta 0.86-1.52 ppm) arising from cis-1,2-Me(2)Im shielding modulated by deshielding influences of the cis halides. The relative stability of the four rotamers correlates best with steric interactions between the 2-Me groups and the Me(2)SO ligands. The most favorable conformer (46%) is the HH rotamer with both 2-Me groups pointing away from the Me(2)SO ligands. The least favorable conformer (14%) was also HH, but the methyl groups in this case point toward the Me(2)SO ligands. In the HT conformers of intermediate stability ( approximately 20%), one 2-Me group is toward and the other is away from the Me(2)SO ligands. The exchange cross-peaks in the 2D spectra are unusually informative about the dynamic processes in solution; the spectra provide evidence that the rotamers interchange in a definite pattern of succession. Thus, all conceivable exchange pathways are not available. 1,2-Me(2)Im "b" can rotate regardless of the orientation of 1,2-Me(2)Im "a". 1,2-Me(2)Im "a" can rotate only when "b" has the orientation with its 2-Me group directed away from "a". Thus, 1,2-Me(2)Im "b" can switch 1,2-Me(2)Im "a" rotation on or off.     

Kinetics and mechanism of N2 hydrogenation in bis(cyclopentadienyl) zirconium complexes and dinitrogen functionalization by 1,2-addition of a saturated C-H bond

The rates of hydrogenation of the N2 ligand in the side-on bound dinitrogen compounds, [(eta(5)-C5Me4H)2Zr]2(mu2,eta(2),eta(2)-N2) and [(eta(5)-C5Me5)(eta(5)-C5H2-1,2-Me2-4-R)Zr]2(mu2,eta(2),eta(2)-N2) (R = Me, Ph), to afford the corresponding hydrido zirconocene diazenido complexes have been measured by electronic spectroscopy. Determination of the rate law for the hydrogenation of [(eta(5)-C5Me5)(eta(5)-C5H2-1,2,4-Me3)Zr]2(mu2,eta(2),eta(2)-N2) establishes an overall second-order reaction, first order with respect to each reagent. These data, in combination with a normal, primary kinetic isotope effect of 2.2(1) for H2 versus D2 addition, establish the first H2 addition as the rate-determining step in N2 hydrogenation. Kinetic isotope effects of similar direction and magnitude have also been measured for hydrogenation (deuteration) of the two other zirconocene dinitrogen complexes. Measuring the rate constants for the hydrogenation of [(eta(5)-C5Me5)(eta(5)-C5H2-1,2,4-Me3)Zr]2(mu2,eta(2),eta(2)-N2) over a 40 degrees C temperature range provided activation parameters of deltaH(double dagger) = 8.4(8) kcal/mol and deltaS(double dagger) = -33(4) eu. The entropy of activation is consistent with an ordered four-centered transition structure, where H2 undergoes formal 1,2-addition to a zirconium-nitrogen bond with considerable multiple bond character. Support for this hypothesis stems from the observation of N2 functionalization by C-H activation of a cyclopentadienyl methyl substituent in the mixed ring dinitrogen complexes, [(eta(5)-C5Me5)(eta(5)-C5H2-1,2-Me2-4-R)Zr]2(mu2,eta(2),eta(2)-N2) (R = Me, Ph), to afford cyclometalated zirconocene diazenido derivatives.     

Mixed micelles formed by SDS and a bolaamphiphile with carbohydrate headgroups

The formation of micelles in aqueous mixtures of a carbohydrate-based bolaamphiphile and sodium dodecyl sulfate (SDS) is investigated by surface tension and small-angle neutron scattering. The obtained values of critical micelle concentration (CMC) are analyzed within the framework of regular solution theory. Synergetic interactions between the bolaamphiphile and SDS are observed (parameter beta is negative; a minimum in the plot CMC vs composition). SANS data are collected for mixtures containing protonated and deuterated SDS. This gives us the possibility to conclude that mixed micelles with a homogeneous distribution of surfactant molecules within the micelle are formed. The shape of the micelles is found to be slightly oblate.     

The surface and solution properties of dihexadecyl dimethylammonium bromide

The surface adsorption behavior and solution aggregate microstructure of the dichain cationic surfactant dihexadecyl dimethylammonium bromide (DHDAB) have been studied using small angle neutron scattering (SANS), light scattering, neutron reflectivity (NR), and surface tension (ST). Using a combination of surface tension and neutron reflectivity, the DHDAB equilibrium surface excess at saturation adsorption has been measured as 2.60 +/- 0.05 x 10 (-10) mol.cm (-2). The values obtained by both methods are in good agreement and are consistent with the values reported for other dialkyl chain surfactants. The critical aggregation concentration (CAC) values obtained from both methods (NR and ST) are also in good agreement, with a mean value for the CAC of 4 +/- 2 x 10 (-5) M. The surface equilibrium is relatively slow, and this is attributed to monomer depletion in the near surface region, as a consequence of the long monomer residence times in the surfactant aggregates. The solution aggregate morphology has been determined using a combination of SANS, dynamic light scattering (DLS), cryogenic transmission electron microscopy (CryoTEM), and ultrasmall angle neutron scattering (USANS). Within the concentration range 1.5-80 mM, the aggregates are in the form of bilamellar vesicles with a lamellar " d-spacing" of the order of 900 A. The vesicles are relatively polydisperse with a particle size in the range 2000-4000 A. Above 80 mM, the bilamellar vesicles coexist with an additional L beta lamellar phase.     

Sterically variable dizinc complexes bearing bis(iminopyridyl)phenolate ligands: synthesis, structures and reactivity studies

A series of chiral dizinc complexes of the type [(2,6-{ArN=C(Me)C5H3N}2C6H3O)Zn2(micro-Cl)Cl2] [Ar=2,6-i-Pr2C6H3 (), 2,6-Me2C6H3 (), 2,4,6-Me3-C6H2 (), 2,4-Me2C6H3 ()] can be conveniently prepared in good yield by the template reaction of 2,6-{O=C(Me)C5H3N}2C6H3OH with an excess of the corresponding aniline and two equivalents of zinc dichloride in n-BuOH at elevated temperature. Alternatively, the pro-ligands, 2,6-{(ArN=C(Me)C5H3N}2C6H3OH [Ar=2,6-i-Pr2C6H3 (L1-H), 2,6-Me2C6H3 (L2-H), 2,4,6-Me3C6H2 (L3-H), 2,4-Me2C6H3 (L4-H)], can be isolated and then treated with two equivalents of zinc dichloride to afford . Interaction of with two equivalents of NaOAc in the presence of TlBF4 gives the diacetate-bridged salt [(L1)Zn2(micro-OAc)2](BF4) () while with Nadbm (dbm=dibenzoylmethanato) the bis(dbm)-chelated salt [(L1)Zn2(dbm)2](BF4) () is obtained. Hydrolysis occurs on reaction of with TlOEt to furnish [(L1)Zn2(micro-OH)Cl2] () as the only isolable product. Conversely, reaction of with Tlhp (hp=2-pyridonate) affords the neutral bis(pyridonate)-bridged trimetallic complex [(L1)Zn3(micro-hp)2Cl3] () as the major product along with as the minor one. Complex and mixtures of / act as modest activators for the ring-opening polymerisation of epsilon-caprolactone. Single crystal X-ray diffraction studies have been performed on , , , , and reveal Zn...Zn separations in the range: 3.069(4)-4.649(6) A.     

Mesoscopic and microscopic investigation on poly(vinyl alcohol) hydrogels in the presence of sodium decylsulfate

The structure of poly(vinyl alcohol) (PVA) hydrogels formed as a result of freeze/thaw treatments of aqueous solutions of the polymer (11 wt % PVA) in the freshly prepared state is analyzed through the combined use of small (SANS) and ultrasmall (USANS) angle neutron scattering techniques. The structure of these hydrogels may be described in terms of polymer rich regions, with dimensions of the order of 1-2 microm, dispersed in a water rich phase, forming two bicontinuous phases. The PVA chains in the polymer rich phase form a network where the cross-linking points are mainly crystalline aggregates of PVA having average dimensions of approximately 45 A. The structural organization of freeze/thaw PVA hydrogel membranes does not change either after rehydration of dried gels or in the presence of a tensile force. Finally, addition of surfactant micelles inside the gel provides a formulation with both hydrophobic and hydrophilic regions, which demonstrates the potential of the system for drug delivery. Both SANS and EPR measurements show that sodium decylsulfate (C10OS) micelles do not significantly interact with the PVA gel. Variation of the gel structure by the number of freeze/thaw cycles should modulate the rate of release of an active constituent, for example, in a dermal patch.     

The structures of complexes between polyethylene imine and sodium dodecyl sulfate in D2O: a scattering study

The association between a highly branched polyelectrolyte with ionizable groups, polyethylene imine (PEI), and an anionic surfactant, sodium dodecyl sulfate (SDS), has been investigated at two pH values, using small-angle neutron and light scattering. The scattering data allow us to obtain a detailed picture of the association structures formed. Small-angle neutron scattering (SANS) measurements in solutions containing highly charged PEI at low pH and low SDS concentrations indicate the presence of disklike aggregates. The aggregates change to a more complex three-dimensional structure with increasing surfactant concentration. One pronounced feature in the scattering curves is the presence of a Bragg-like peak at high q-values observed at a surfactant concentration of 4.2 mM and above. This scattering feature is attributed to the formation of a common well-ordered PEI/SDS structure, in analogue to what has been reported for other polyelectrolyte-surfactant systems. Precipitation occurred at the charge neutralization point, and X-ray diffraction measurements on the precipitate confirmed the existence of an ordered structure within the PEI/SDS aggregates, which was identified as a lamellar internal organization. Polyethylene imine has a low charge density in alkaline solutions. At pH 10.1 and under conditions where the surfactant was contrast matched, the SANS scattering curves showed only small changes with increasing surfactant concentration. This suggests that the polymer acts as a template onto which the surfactant molecules aggregate. Data from both static light scattering and SANS recorded under conditions where SDS and to a lower degree PEI contribute to the scattering were found to be consistent with a structure of stacked elliptic bilayers. These structures increased in size and became more compact as the surfactant concentration was increased up to the charge neutralization point.     

Novel reactions of phosphorus(III) azides and isocyanates: unusual modes of cycloaddition with dipolarophiles and an unexpected case of ring expansion

New modes of 1,3-dipolar cycloaddition are uncovered by the isolation of [CH2(6-t-Bu-4-Me-C6H2O)2]P(C(CO2Me)C(CO2Me)N[NP(N3)(OC6H2-6-t-Bu-4-Me)2CH2]N) (3) and [CH2(6-t-Bu-4-Me-C6H2O)2]P(C(CO2Me)C(CO2Me)C(O)N) (4) on treating [CH2(6-t-Bu-4-Me-C6H2O)2]P-X [X = N3 (1) and NCO (2)] with the dipolarophile MeO2CC identical to CCO2Me; compound 4 undergoes an unprecedented ring expansion upon addition of 2-(methylamino)ethanol to afford the spirocycle [CH2(6-t-Bu-4-Me-C6H2O)2]P(OCH2CH2N(Me)CH(CO2Me)CH(CO2Me)C(O)N) (5).     

The metalla-Pinner reaction between Pt(IV)-bound nitriles and alkylated oxamic and oximic forms of hydroxamic acids

The nitrile ligands in the platinum(IV) complexes trans-[PtCl4(RCN)2] (R=Me, Et, CH2Ph) and cis/trans-[PtCl4(MeCN)(Me2SO)] are involved in a metalla-Pinner reaction with N-methylbenzohydroxamic acid (N-alkylated form of hydroxamic acid, hydroxamic form; F1), PhC(=O)N(Me)OH, to achieve the imino species [PtCl4[NH=C(R)ON(Me)C(=O)Ph]2 (1-3) and [PtCl4[NH=C(Me)ON(Me)C(=O)Ph](Me2SO)] (7), respectively. Treatment of trans-[PtCl4(RCN)2] (R=Me, Et) and cis/trans-[PtCl4(MeCN)(Me2SO)] with the O-alkylated form of a hydroxamic acid (hydroximic form), i.e. methyl 2,4,6-trimethylbenzohydroximate, 2,4,6-(Me3C6H2)C(OMe)=NOH (F2A), allows the isolation of [PtCl4[NH=C(R)ON=C(OMe)(2,4,6-Me3C6H2)]2] (5, 6) and [PtCl4[NH=C(Me)ON=C(OMe)(2,4,6-Me3C6H2)](Me2SO)] (8), correspondingly. In accord with the latter reaction, the coupling of nitriles in trans-[PtCl4(EtCN)2] with methyl benzohydroximate, PhC(OMe)=NOH (F2B), gives [PtCl4[NH=C(Et)ON=C(OMe)Ph]2] (4). The addition proceeds faster with the hydroximic F2, rather than with the hydroxamic form F1. The complexes 1-8 were characterized by C, H, N elemental analyses, FAB+ mass-spectrometry, IR, 1H and 13C[1H] NMR spectroscopies. The X-ray structure determinations have been performed for both hydroxamic and hydroximic complexes, i.e. 2 and 6, indicating that the imino ligands are mutually trans and they are in the E-configuration.     

Solvent entrainment in and flocculation of asphaltenic aggregates probed by small-angle neutron scattering

While small-angle neutron scattering (SANS) has proven to be very useful for deducing the sizes and masses of asphaltenic aggregates in solution, care must be taken to account for solvation effects within the aggregates so as to not err in the characterization of these important systems. SANS measurements were performed on solutions of asphaltenes dispersed in deuterated solvents in which a broad spectrum of solute and solvent chemical compositions was represented. Fits to the scattering intensity curves were performed using the Guinier approximation, the Ornstein-Zernike (or Zimm) model, a mass-fractal model, and a polydisperse cylinder model. The mass-fractal model provided apparent fractal dimensions (2.2-3) for the aggregates that generally decreased with increasing aggregate size, indicating increased surface roughness for larger aggregates. The polydisperse cylinder model provided typical values of the particle thicknesses from 5 to 32 angstroms, the average particle radius from 25 to 125 angstroms, and approximately 30% radius polydispersity. Subsequent calculation of average aggregate molar masses suggested a range of solvent entrainment from 30 to 50% (v/v) within the aggregates that were consistent with previous viscosity measurements. Additional calculations were performed to estimate the proportion of microparticle to nanoparticle aggregates in the solutions. The results indicate that the inclusion of solvation effects is essential for the accurate determination of aggregate molecular weights and fractal dimensions.     

四甲基硅锗桥连双环戊二烯基及双(四甲基环戊二烯基)四羰 基二铁的合成、结 构及热重排反应

1,2-二氯四甲基硅锗烷分别与环戊二烯基锂及四甲基环戊二烯基锂反应得到两个新的双齿配体：C5H5Me2SiGeMe2C5H5(9)和C5HMe4Me2SiGeMe2C5HMe4(10).配体9和10分别与Fe(CO)5在二甲苯中加热生成四甲基硅锗桥连双环戊二烯基四羰基二铁(11)和四甲基硅锗桥连双(四甲基环戊二烯基)四羰基二铁(13).11和13均可发生热重排反应,生成[(η^5-C5R4)Fe(CO)2]2(μ-Me2Si)(μ-Me2Ge)(R=H,12;R=Me,14)。测定了化合物11,12,13及14的晶体结构,讨论了桥连四甲基环戊二烯基配体的位阻效应对其某些结构参数以及重排反应性的影响。